summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-12bnxt_en: Improve stats context resource accounting with RDMA driver loaded.Michael Chan
The function bnxt_get_ulp_stat_ctxs() does not count the stats contexts used by the RDMA driver correctly when the RDMA driver is freeing the MSIX vectors. It assumes that if the RDMA driver is registered, the additional stats contexts will be needed. This is not true when the RDMA driver is about to unregister and frees the MSIX vectors. This slight error leads to over accouting of the stats contexts needed after the RDMA driver has unloaded. This will cause some firmware warning and error messages in dmesg during subsequent config. changes or ifdown/ifup. Fix it by properly accouting for extra stats contexts only if the RDMA driver is registered and MSIX vectors have been successfully requested. Fixes: c027c6b4e91f ("bnxt_en: get rid of num_stat_ctxs variable") Reviewed-by: Yongping Zhang <yongping.zhang@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8153_ecm: Add Lenovo Powered USB-C Hub as a fallback of r8152Leon Schuermann
This commit enables the use of the r8153_ecm driver, introduced with commit c1aedf015ebdd0 ("net/usb/r8153_ecm: support ECM mode for RTL8153") for the Lenovo Powered USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip. This results in the following driver preference: - if r8152 is available, use the r8152 driver - if r8152 is not available, use the r8153_ecm driver This is done to prevent the NIC from constantly sending pause frames when the host system enters standby (fixed by using the r8152 driver in "r8152: Add Lenovo Powered USB-C Travel Hub"), while still allowing the device to work with the r8153_ecm driver as a fallback. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-3-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12r8152: Add Lenovo Powered USB-C Travel HubLeon Schuermann
This USB-C Hub (17ef:721e) based on the Realtek RTL8153B chip used to use the cdc_ether driver. However, using this driver, with the system suspended the device constantly sends pause-frames as soon as the receive buffer fills up. This causes issues with other devices, where some Ethernet switches stop forwarding packets altogether. Using the Realtek driver (r8152) fixes this issue. Pause frames are no longer sent while the host system is suspended. Signed-off-by: Leon Schuermann <leon@is.currently.online> Tested-by: Leon Schuermann <leon@is.currently.online> Link: https://lore.kernel.org/r/20210111190312.12589-2-leon@is.currently.online Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12scsi: scsi_transport_srp: Don't block target in failfast stateMartin Wilck
If the port is in SRP_RPORT_FAIL_FAST state when srp_reconnect_rport() is entered, a transition to SDEV_BLOCK would be illegal, and a kernel WARNING would be triggered. Skip scsi_target_block() in this case. Link: https://lore.kernel.org/r/20210111142541.21534-1-mwilck@suse.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-12net: phy: smsc: fix clk error handlingMarco Felsch
Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12dm integrity: fix the maximum number of argumentsMikulas Patocka
Advance the maximum number of arguments from 9 to 15 to account for all potential feature flags that may be supplied. Linux 4.19 added "meta_device" (356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate" (a3fcf7253139609bf9ff901fbf955fba047e75dd) flags. Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added "sectors_per_bit" and "bitmap_flush_interval". Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added "allow_discards". And the commit d537858ac8aaf4311b51240893add2fc62003b97 added "fix_padding". Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-12Merge tag 'irqchip-fixes-5.11-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix the MIPS CPU interrupt controller hierarchy - Simplify the PRUSS Kconfig entry - Eliminate trivial build warnings on the MIPS Loongson liointc - Fix error path in devm_platform_get_irqs_affinity() - Turn the BCM2836 IPI irq_eoi callback into irq_ack - Fix initialisation of on-stack msi_alloc_info - Cleanup spurious comma in irq-sl28cpld Link: https://lore.kernel.org/r/20210110110001.2328708-1-maz@kernel.org
2021-01-12clk: mmp2: fix build without CONFIG_PMArnd Bergmann
pm_clk_suspend()/pm_clk_resume() are defined as NULL pointers rather than empty inline stubs without CONFIG_PM: drivers/clk/mmp/clk-audio.c:402:16: error: called object type 'void *' is not a function or function pointer pm_clk_suspend(dev); drivers/clk/mmp/clk-audio.c:411:15: error: called object type 'void *' is not a function or function pointer pm_clk_resume(dev); I tried redefining the helper functions, but that caused additional problems. This is the simple solution of replacing the __maybe_unused trick with an #ifdef. Fixes: 725262d29139 ("clk: mmp2: Add audio clock controller driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210103135503.3668784-1-arnd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12clk: qcom: gcc-sm250: Use floor ops for sdcc clksDmitry Baryshkov
Followup to the commits 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") and 6d37a8d19283 ("clk: qcom: gcc-sc7180: Use floor ops for sdcc clks"). Use floor ops for sdcc clocks on sm8250. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Link: https://lore.kernel.org/r/20210109013314.3443134-1-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12clk: imx: fix Kconfig warning for i.MX SCU clkArnd Bergmann
A previous patch introduced a harmless randconfig warning: WARNING: unmet direct dependencies detected for MXC_CLK_SCU Depends on [n]: COMMON_CLK [=y] && ARCH_MXC [=n] && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y] Selected by [m]: - CLK_IMX8QXP [=m] && COMMON_CLK [=y] && (ARCH_MXC [=n] && ARM64 [=y] || COMPILE_TEST [=y]) && IMX_SCU [=y] && HAVE_ARM_SMCCC [=y] Since the symbol is now hidden and only selected by other symbols, just remove the dependencies and require the other drivers to get it right. Fixes: 6247e31b7530 ("clk: imx: scu: fix MXC_CLK_SCU module build break") Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201230155244.981757-1-arnd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12clk: qcom: gcc-sc7180: Mark the camera abh clock always ONTaniya Das
The camera clock controller requires the AHB clock, the driver when moved to use the pm_runtime_get() API, the camera ahb clock failed turn on before access, thus mark it as always ON. Reported-by: Stephen Boyd <sboyd@kernel.org> Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1608573816-1465-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-01-12dm crypt: do not call bio_endio() from the dm-crypt taskletIgnat Korchagin
Sometimes, when dm-crypt executes decryption in a tasklet, we may get "BUG: KASAN: use-after-free in tasklet_action_common.constprop..." with a kasan-enabled kernel. When the decryption fully completes in the tasklet, dm-crypt will call bio_endio(), which in turn will call clone_endio() from dm.c core code. That function frees the resources associated with the bio, including per bio private structures. For dm-crypt it will free the current struct dm_crypt_io, which contains our tasklet object, causing use-after-free, when the tasklet is being dequeued by the kernel. To avoid this, do not call bio_endio() from the current tasklet context, but delay its execution to the dm-crypt IO workqueue. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: <stable@vger.kernel.org> # v5.9+ Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-12Revert "driver core: Reorder devices on successful probe"Greg Kroah-Hartman
This reverts commit 5b6164d3465fcc13b5679c860c452963443172a7. Stephan reports problems with this commit, so revert it for now. Fixes: 5b6164d3465f ("driver core: Reorder devices on successful probe") Link: https://lore.kernel.org/r/X/ycQpu7NIGI969v@gerhold.net Reported-by: Stephan Gerhold <stephan@gerhold.net> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Rafael. J. Wysocki <rafael@kernel.org> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12Merge tag 'mkp-scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi Pull SCSI target fix from Martin Petersen: "This addresses an issue in the SCSI target subsystem. A connected initiator could specify IDs for any configured backing store device, not just the ones explicitly made visible to the host. The remedy is to honor the access control list when doing ID descriptor lookups" * tag 'mkp-scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi: scsi: target: Fix XCOPY NAA identifier lookup
2021-01-12drm/i915: Allow the sysadmin to override security mitigationsChris Wilson
The clear-residuals mitigation is a relatively heavy hammer and under some circumstances the user may wish to forgo the context isolation in order to meet some performance requirement. Introduce a generic module parameter to allow selectively enabling/disabling different mitigations. To disable just the clear-residuals mitigation (on Ivybridge, Baytrail, or Haswell) use the module parameter: i915.mitigations=auto,!residuals Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk (cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12drm/i915/gt: Restore clear-residual mitigations for Ivybridge, BaytrailChris Wilson
The mitigation is required for all gen7 platforms, now that it does not cause GPU hangs, restore it for Ivybridge and Baytrail. Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Bloomfield Jon <jon.bloomfield@intel.com> Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk (cherry picked from commit 008ead6ef8f588a8c832adfe9db201d9be5fd410) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12drm/i915/gt: Limit VFE threads based on GTChris Wilson
MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the range [0, n-1] where n is #EU * (#threads/EU) with the number of threads based on plaform and the number of EU based on the number of slices and subslices. This is a fixed number per platform/gt, so appropriately limit the number of threads we spawn to match the device. v2: Oversaturate the system with tasks to force execution on every HW thread; if the thread idles it is returned to the pool and may be reused again before an unused thread. v3: Fix more state commands, which was causing Baytrail to barf. v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Randy Wright <rwright@hpe.com> Cc: stable@vger.kernel.org # v5.7+ Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk (cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-12iommu/vt-d: Fix duplicate included linux/dma-map-ops.hTian Tao
linux/dma-map-ops.h is included more than once, Remove the one that isn't necessary. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/1609118774-10083-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12usb: gadget: aspeed: fix stop dma register setting.Ryan Chen
The vhub engine has two dma mode, one is descriptor list, another is single stage DMA. Each mode has different stop register setting. Descriptor list operation (bit2) : 0 disable reset, 1: enable reset Single mode operation (bit0) : 0 : disable, 1: enable Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub") Cc: stable <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Link: https://lore.kernel.org/r/20210108081238.10199-2-ryan_chen@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12USB: ehci: fix an interrupt calltrace errorLongfang Liu
The system that use Synopsys USB host controllers goes to suspend when using USB audio player. This causes the USB host controller continuous send interrupt signal to system, When the number of interrupts exceeds 100000, the system will forcibly close the interrupts and output a calltrace error. When the system goes to suspend, the last interrupt is reported to the driver. At this time, the system has set the state to suspend. This causes the last interrupt to not be processed by the system and not clear the interrupt flag. This uncleared interrupt flag constantly triggers new interrupt event. This causing the driver to receive more than 100,000 interrupts, which causes the system to forcibly close the interrupt report and report the calltrace error. so, when the driver goes to sleep and changes the system state to suspend, the interrupt flag needs to be cleared. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1610416647-45774-1-git-send-email-liulongfang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12ehci: fix EHCI host controller initialization sequenceEugene Korenevsky
According to EHCI spec, EHCI HC clears USBSTS.HCHalted whenever USBCMD.RS=1. However, it is a good practice to wait some time after setting USBCMD.RS (approximately 100ms) until USBSTS.HCHalted become zero. Without this waiting, VirtualBox's EHCI virtual HC accidentally hangs (see BugLink). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211095 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210110173609.GA17313@himera.home Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-12Merge tag 'thunderbolt-for-v5.11-rc4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.11-rc4 This includes a single format string fix for the firmware connection manager USB4 NVM authentication proxy implementation introduced in this merge window. * tag 'thunderbolt-for-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Drop duplicated 0x prefix from format string
2021-01-12iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirksKonrad Dybcio
SDM630 and MSM8998 are among the SoCs that use Qualcomm's implementation of SMMUv2 which has already proven to be problematic over the years. Add their compatibles to the lookup list to prevent the platforms from being shut down by the hypervisor at MMU probe. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109165622.149777-1-konrad.dybcio@somainline.org Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12iommu/vt-d: Fix unaligned addresses for intel_flush_svm_range_dev()Lu Baolu
The VT-d hardware will ignore those Addr bits which have been masked by the AM field in the PASID-based-IOTLB invalidation descriptor. As the result, if the starting address in the descriptor is not aligned with the address mask, some IOTLB caches might not invalidate. Hence people will see below errors. [ 1093.704661] dmar_fault: 29 callbacks suppressed [ 1093.704664] DMAR: DRHD: handling fault status reg 3 [ 1093.712738] DMAR: [DMA Read] Request device [7a:02.0] PASID 2 fault addr 7f81c968d000 [fault reason 113] SM: Present bit in first-level paging entry is clear Fix this by using aligned address for PASID-based-IOTLB invalidation. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Reported-and-tested-by: Guo Kaijie <Kaijie.Guo@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20201231005323.2178523-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-12media: Revert "media: videobuf2: Fix length check for single plane dmabuf ↵Naushir Patuck
queueing" The updated length check for dmabuf types broke existing usage in v4l2 userland clients. Fixes: 961d3b27 ("media: videobuf2: Fix length check for single plane dmabuf queueing") Cc: stable@vger.kernel.org Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12Merge tag 'usb-v5.11-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: - Several bug-fixes for cdns3 imx driver - Update Peter Chen and Roger Quadros email address * tag 'usb-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: MAINTAINERS: update Peter Chen's email address MAINTAINERS: Update address for Cadence USB3 driver usb: cdns3: imx: improve driver .remove API usb: cdns3: imx: fix can't create core device the second time issue usb: cdns3: imx: fix writing read-only memory issue
2021-01-12clk: tegra30: Add hda clock default rates to clock driverPeter Geis
Current implementation defaults the hda clocks to clk_m. This causes hda to run too slow to operate correctly. Fix this by defaulting to pll_p and setting the frequency to the correct rate. This matches upstream t124 and downstream t30. Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Ion Agorria <ion@agorria.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-12drm/ttm: make the pool shrinker lock a mutexChristian König
set_pages_wb() might sleep and so we can't do this in an atomic context. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/413409/
2021-01-12habanalabs: prevent soft lockup during unmapOded Gabbay
When using Deep learning framework such as tensorflow or pytorch, there are tens of thousands of host memory mappings. When the user frees all those mappings at the same time, the process of unmapping and unpinning them can take a long time, which may cause a soft lockup bug. To prevent this, we need to free the core to do other things during the unmapping process. For now, we chose to do it every 32K unmappings (each unmap is a single 4K page). Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-12habanalabs: fix reset process in case of failuresOded Gabbay
There are some points in the reset process where if the code fails for some reason, and the system admin tries to initiate the reset process again we will get a kernel panic. This is because there aren't any protections in different fini functions that are called during the reset process. The protections that are added in this patch make sure that if the fini functions are called multiple times, without calling init functions between them, there won't be double release of already released resources. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-12habanalabs: fix dma_addr passed to dma_mmap_coherentOded Gabbay
When doing dma_alloc_coherent in the driver, we add a certain hard-coded offset to the DMA address before returning to the callee function. This offset is needed when our device use this DMA address to perform outbound transactions to the host. However, if we want to map the DMA'able memory to the user via dma_mmap_coherent(), we need to pass the original dma address, without this offset. Otherwise, we will get erronouos mapping. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-12media: rc: ite-cir: fix min_timeout calculationMatthias Reichl
Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch the min_timeout calculation from ns to us. This resulted in a minimum timeout of 1.2 seconds instead of 1.2ms, leading to large delays and long key repeats. Fix this by applying proper ns->us conversion. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-11Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_tableSouptick Joarder
Kernel test robot throws below warning -> >> drivers/input/misc/ariel-pwrbutton.c:152:35: warning: unused variable >> 'ariel_pwrbutton_id_table' [-Wunused-const-variable] static const struct spi_device_id ariel_pwrbutton_id_table[] = { ^ 1 warning generated. Remove unused variable ariel_pwrbutton_id_table[] if no plan to use it further. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/1608581041-4354-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM requestAndrey Zhizhikin
MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: mvpp2: Remove Pause and Asym_Pause supportStefan Chulski
Packet Processor hardware not connected to MAC flow control unit and cannot support TX flow control. This patch disable flow control support. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp
When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-11i2c: tegra: Wait for config load atomically while in ISRMikko Perttunen
Upon a communication error, the interrupt handler can call tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen unless the current transaction was marked atomic. Fix this by making the poll happen atomically if we are in an IRQ. This matches the behavior prior to the patch mentioned in the Fixes tag. Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers") Cc: stable@vger.kernel.org Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-01-11drm: Check actual format for legacy pageflip.Bas Nieuwenhuizen
With modifiers one can actually have different format_info structs for the same format, which now matters for AMDGPU since we convert implicit modifiers to explicit modifiers with multiple planes. I checked other drivers and it doesn't look like they end up triggering this case so I think this is safe to relax. Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 816853f9dc40 ("drm/amd/display: Set new format info for converted metadata.") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210110021142.28221-1-bas@basnieuwenhuizen.nl
2021-01-11libnvdimm/pmem: Remove unused headerJianpeng Ma
'commit a8b456d01cd6 ("bdi: remove BDI_CAP_SYNCHRONOUS_IO")' forgot remove the related header file. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20201229002635.42555-1-jianpeng.ma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-01-11ACPI: NFIT: Fix flexible_array.cocci warningsDan Williams
Julia and 0day report: Zero-length and one-element arrays are deprecated, see Documentation/process/deprecated.rst Flexible-array members should be used instead. However, a straight conversion to flexible arrays yields: drivers/acpi/nfit/core.c:2276:4: error: flexible array member in a struct with no named members drivers/acpi/nfit/core.c:2287:4: error: flexible array member in a struct with no named members Instead, just use plain arrays not embedded flexible arrays. Cc: Denis Efremov <efremov@linux.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-01-11drm/ttm: Fix address passed to dma_mapping_error() in ttm_pool_map()Jeremy Cline
check_unmap() is producing a warning about a missing map error check. The return value from dma_map_page() should be checked for an error, not the caller-provided dma_addr. Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/413432/ Signed-off-by: Christian König <christian.koenig@amd.com>
2021-01-11ACPI: scan: Harden acpi_device_add() against device ID overflowsDexuan Cui
Linux VM on Hyper-V crashes with the latest mainline: [ 4.069624] detected buffer overflow in strcpy [ 4.077733] kernel BUG at lib/string.c:1149! .. [ 4.085819] RIP: 0010:fortify_panic+0xf/0x11 ... [ 4.085819] Call Trace: [ 4.085819] acpi_device_add.cold.15+0xf2/0xfb [ 4.085819] acpi_add_single_object+0x2a6/0x690 [ 4.085819] acpi_bus_check_add+0xc6/0x280 [ 4.085819] acpi_ns_walk_namespace+0xda/0x1aa [ 4.085819] acpi_walk_namespace+0x9a/0xc2 [ 4.085819] acpi_bus_scan+0x78/0x90 [ 4.085819] acpi_scan_init+0xfa/0x248 [ 4.085819] acpi_init+0x2c1/0x321 [ 4.085819] do_one_initcall+0x44/0x1d0 [ 4.085819] kernel_init_freeable+0x1ab/0x1f4 This is because of the recent buffer overflow detection in the commit 6a39e62abbaf ("lib: string.h: detect intra-object overflow in fortified string functions") Here acpi_device_bus_id->bus_id can only hold 14 characters, while the the acpi_device_hid(device) returns a 22-char string "HYPER_V_GEN_COUNTER_V1". Per ACPI Spec v6.2, Section 6.1.5 _HID (Hardware ID), if the ID is a string, it must be of the form AAA#### or NNNN####, i.e. 7 chars or 8 chars. The field bus_id in struct acpi_device_bus_id was originally defined as char bus_id[9], and later was enlarged to char bus_id[15] in 2007 in the commit bb0958544f3c ("ACPI: use more understandable bus_id for ACPI devices") Fix the issue by changing the field bus_id to const char *, and use kstrdup_const() to initialize it. Signed-off-by: Dexuan Cui <decui@microsoft.com> Tested-By: Jethro Beekman <jethro@fortanix.com> [ rjw: Subject change, whitespace adjustment ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-11Merge tag 'hyperv-fixes-signed-20210111' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - fix kexec panic/hang (Dexuan Cui) - fix occasional crashes when flushing TLB (Wei Liu) * tag 'hyperv-fixes-signed-20210111' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: check cpu mask after interrupt has been disabled x86/hyperv: Fix kexec panic/hang issues
2021-01-11Merge tag 'gvt-fixes-2020-01-08' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2020-01-08 - Fix VFIO EDID on APL/BXT (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108045911.GF15982@zhen-hp.sh.intel.com
2021-01-11drm/i915/icl: Fix initing the DSI DSC power refcount during HW readoutImre Deak
For an enabled DSC during HW readout the corresponding power reference is taken along the CRTC power domain references in get_crtc_power_domains(). Remove the incorrect get ref from the DSI encoder hook. Fixes: 2b68392e638d ("drm/i915/dsi: add support for DSC") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com (cherry picked from commit 3a9ec563a4ff770ae647f6ee539810f1866866c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-01-11mmc: sdhci-xenon: fix 1.8v regulator stabilizationAlex Leibovich
Automatic Clock Gating is a feature used for the power consumption optimisation. It turned out that during early init phase it may prevent the stable voltage switch to 1.8V - due to that on some platforms an endless printout in dmesg can be observed: "mmc1: 1.8V regulator output did not became stable" Fix the problem by disabling the ACG at very beginning of the sdhci_init and let that be enabled later. Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality") Signed-off-by: Alex Leibovich <alexl@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201211141656.24915-1-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-01-11mmc: sdhci-of-dwcmshc: fix rpmb accessJisheng Zhang
Commit a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB") began to use ACMD23 for RPMB if the host supports ACMD23. In RPMB ACM23 case, we need to set bit 31 to CMD23 argument, otherwise RPMB write operation will return general fail. However, no matter V4 is enabled or not, the dwcmshc's ARGUMENT2 register is 32-bit block count register which doesn't support stuff bits of CMD23 argument. So let's handle this specific ACMD23 case. From another side, this patch also prepare for future v4 enabling for dwcmshc, because from the 4.10 spec, the ARGUMENT2 register is redefined as 32bit block count which doesn't support stuff bits of CMD23 argument. Fixes: a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201229161625.38255233@xhacker.debian Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-01-11Merge tag 'phy-fixes-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: fixes for 5.11 *) Fix Ingenic driver build *) Warning fix for cpcap-usb *) Compile test enabling for mediatek phy * tag 'phy-fixes-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: allow compile-testing the dsi phy phy: cpcap-usb: Fix warning for missing regulator_disable PHY: Ingenic: fix unconditional build of phy-ingenic-usb
2021-01-11media: venus: core: Fix platform driver shutdownStanimir Varbanov
With TZ system reboot cannot finish successfully. To fix that enable core clocks by runtime pm before TZ calls and disable clocks after that. Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-11media: rc: fix timeout handling after switch to microsecond durationsMatthias Reichl
Commit 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") missed to switch some timeout calculations from nanoseconds to microseconds. This resulted in spurious key_up+key_down events at the last scancode if the rc device uses a long timeout (eg 100ms on nuvoton-cir) as the device timeout wasn't properly accounted for in the keyup timeout calculation. Fix this by applying the proper conversion functions. Cc: stable@vger.kernel.org Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-13 16:14:45 +0000