summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-10drm/sun4i: tcon: set sync polarity for tcon1 channelJernej Skrabec
Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
2021-02-10Merge tag 'timers-v5.12-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/events updates from Daniel Lezcano: - Drop dead code on efm32 (Uwe Kleine-König) - Move pr_fmt() before the includes on davinci driver (Bartosz Golaszewski) - Clarified timer interrupt must be specified on nuvoton DT bindings (Jonathan Neuschäfer) - Remove tango, sirf, u300 and atlas timer drivers (Arnd Bergman) - Add suspend/resume on pit64b (Claudiu Beznea) Link: https://lore.kernel.org/r/3747fbde-134f-5e1d-47d5-8776c1a52aa1@linaro.org
2021-02-10soc: aspeed: snoop: Add clock control logicJae Hyun Yoo
If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC SNOOP block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupt in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub-nodes should enable LCLK individually so this patch adds clock control logic into the LPC SNOOP driver. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com> Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-10Merge tag 'spi-nor/for-5.12' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add non-uniform erase fixes. - Add Global Block Unlock command. It is defined by few flash vendors, and it is used for now just by sst. SPI NOR controller drivers changes: - intel-spi: Add support for Intel Alder Lake-P SPI serial flash. - hisi-sfc: Put child node np on error path.
2021-02-10Merge tag 'nand/for-5.12' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND controller drivers: * Intel: Fix an error handling path in 'ebu_dma_start()' * Tango: Remove the driver * Marvell: Convert comma to semicolon * MXC: Convert comma to semicolon * Qcom: Add support for Qcom SMEM parser Related MTD changes: * parsers: Add Qcom SMEM parser
2021-02-10drm/i915: Fix overlay frontbuffer trackingVille Syrjälä
We don't have a persistent fb holding a reference to the frontbuffer object, so every time we do the get+put we throw the frontbuffer object immediately away. And so the next time around we get a pristine frontbuffer object with bits==0 even for the old vma. This confuses the frontbuffer tracking code which understandably expects the old frontbuffer to have the overlay's bit set. Fix this by hanging on to the frontbuffer reference until the next flip. And just to make this a bit more clear let's track the frontbuffer explicitly instead of just grabbing it via the old vma. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 553c23bdb4775130f333f07a51b047276bc53f79) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-10ath11k: fix a locking bug in ath11k_mac_op_start()Dan Carpenter
This error path leads to a Smatch warning: drivers/net/wireless/ath/ath11k/mac.c:4269 ath11k_mac_op_start() error: double unlocked '&ar->conf_mutex' (orig line 4251) We're not holding the lock when we do the "goto err;" so it leads to a double unlock. The fix is to hold the lock for a little longer. Fixes: c83c500b55b6 ("ath11k: enable idle power save mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [kvalo@codeaurora.org: move also rcu_assign_pointer() call] Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YBk4GoeE+yc0wlJH@mwanda
2021-02-10rtlwifi: rtl8821ae: phy: Simplify bool comparisonJiapeng Chong
Fix the following coccicheck warning: ./drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:3853:7-17: WARNING: Comparison of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612840381-109714-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-10rtlwifi: rtl8192se: Simplify bool comparisonJiapeng Chong
Fix the follow coccicheck warnings: ./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:2305:6-27: WARNING: Comparison of 0/1 to bool variable. ./drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c:1376:5-26: WARNING: Comparison of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1612839264-85773-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-10hwrng: timeriomem - Use device-managed registration APITian Tao
Use devm_hwrng_register to get rid of manual unregistration. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix printing format issueWeili Qian
This patch fixes inconsistent of printing format with argument type. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - do not reset hardware when CE happensWeili Qian
There is no need to reset hardware when Corrected Error(CE) happens. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - update irqflagSihang Chen
There is no need to share IRQ among several devices, and set 'irqflag' as 0. Signed-off-by: Sihang Chen <chensihang1@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2'Weili Qian
Since the size of base number is 16 bits, update the value of 'QM_SQC_VFT_BASE_MASK_V2' as 'GENMASK(15, 0)'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix request missing errorWeili Qian
Add 'qp_stop_fail_cb' to ensure it is called as device is resetting. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - removing driver after resetWeili Qian
Add waiting logic for resetting as removing driver, otherwise call trace will occur due to releasing resource. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: octeontx2 - fix -Wpointer-bool-conversion warningArnd Bergmann
When CONFIG_CPUMASK_OFFSTACK is disabled, clang reports a warning about a bogus condition: drivers/crypto/marvell/octeontx2/otx2_cptlf.c:334:21: error: address of array 'lfs->lf[slot].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] if (lfs->lf[slot].affinity_mask) ~~ ~~~~~~~~~~~~~~^~~~~~~~~~~~~ In this configuration, the free_cpumask_var() function does nothing, so the condition could be skipped. When the option is enabled, there is no warning, but the check is also redundant because free_cpumask_var() falls back to kfree(), which is documented as ignoring NULL pointers. Remove the check to avoid the warning. Fixes: 64506017030d ("crypto: octeontx2 - add LF framework") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - enable Elliptic curve cryptographyHui Tang
Enable x25519/x448/ecdh/ecdsa/sm2 algorithm on Kunpeng 930. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon - PASID fixed on Kunpeng 930Weili Qian
Enable PASID by setting 'sqc' and 'cqc' pasid bits per queue in Kunpeng 930. For Kunpeng 920, PASID is effective for all queues once set in SVA scenarios. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - fix use of 'dma_map_single'Weili Qian
Calling 'dma_map_single' after the data is written to ensure that the cpu cache and dma cache are consistent. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - tiny fixHui Tang
Update since some special settings only for Kunpeng920. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/hpre - adapt the number of clustersHui Tang
HPRE of Kunpeng 930 is updated on cluster numbers, so we try to update this driver to make it running okay on Kunpeng920/Kunpeng930 chips. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: cpt - remove casting dma_alloc_coherentXu Wang
Remove casting the values returned by dma_alloc_coherent. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generationDaniele Alessandrelli
In ocs_aes_ccm_write_b0(), 'q' (the octet length of the binary representation of the octet length of the payload) is set to 'iv[0]', while it should be set to 'iv[0] & 0x7' (i.e., only the last 3 bits of iv[0] should be used), as documented in NIST Special Publication 800-38C: https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38c.pdf In practice, this is not an issue, since 'iv[0]' is checked to be in the range [1-7] by ocs_aes_validate_inputs(), but let's fix the assignment anyway, in order to make the code more robust. Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10hwrng: optee - Use device-managed registration APITian Tao
Use devm_hwrng_register to get rid of manual unregistration. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: caam - Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEJiapeng Chong
Fix the following coccicheck warning: ./drivers/crypto/caam/debugfs.c:23:0-23: WARNING: caam_fops_u64_ro should be defined with DEFINE_DEBUGFS_ATTRIBUTE. ./drivers/crypto/caam/debugfs.c:22:0-23: WARNING: caam_fops_u32_ro should be defined with DEFINE_DEBUGFS_ATTRIBUTE. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10hwrng: timeriomem - Fix cooldown period calculationJan Henrik Weinstock
Ensure cooldown period tolerance of 1% is actually accounted for. Fixes: ca3bff70ab32 ("hwrng: timeriomem - Improve performance...") Signed-off-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: marvell - CRYPTO_DEV_OCTEONTX2_CPT should depend on ARCH_THUNDER2Geert Uytterhoeven
The Marvell OcteonTX2 CPT physical function PCI device is present only on OcteonTx2 SoC, and not available as an independent PCIe endpoint. Hence add a dependency on ARCH_THUNDER2, to prevent asking the user about this driver when configuring a kernel without OcteonTx2 platform support. Fixes: 5e8ce8334734c5f2 ("crypto: marvell - add Marvell OcteonTX2 CPT PF driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-09Revert "drm/amd/display: Update NV1x SR latency values"Alex Deucher
This reverts commit 4a3dea8932d3b1199680d2056dd91d31d94d70b7. This causes blank screens for some users. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1482 Cc: Alvin Lee <alvin.lee2@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-02-09Merge tag 'i3c/fixes-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c fix from Alexandre Belloni: "A single build warning fix" * tag 'i3c/fixes-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c/master/mipi-i3c-hci: Fix position of __maybe_unused in i3c_hci_of_match
2021-02-09clk: at91: Fix the declaration of the clocksTudor Ambarus
These are all "early clocks" that require initialization just at of_clk_init() time. Use CLK_OF_DECLARE() to declare them. This also fixes a problem that was spotted when fw_devlink was set to 'on' by default: the boards failed to boot. The reason is that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes the consumers of the clock to be postponed by fw_devlink until the second initialization routine of the clock has been completed. One of the consumers of the clock is the timer, which is used as a clocksource, and needs the clock initialized early. Postponing the timers caused the fail at boot. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-09Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-02-08 This series contains updates to i40e driver only. Cristian makes improvements to driver XDP path. Avoids writing next-to-clean pointer on every update, removes redundant updates of cleaned_count and buffer info, creates a helper function to consolidate XDP actions and simplifies some of the behavior. Eryk adds messages to inform the user when MTU is larger than supported ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-02-08 This series contains updates to the ice driver and documentation. Brett adds a log message when a trusted VF goes in and out of promiscuous for consistency with i40e driver. Dave implements a new LLDP command that allows adding VSI destinations to existing filters and adds support for netdev bonding events, current support is software based. Michal refactors code to move from VSI stored xsk_buff_pools to netdev-provided ones. Kiran implements the creation scheduler aggregator nodes and distributing VSIs within the nodes. Ben modifies rate limit calculations to use clock frequency from the hardware instead of using a hardcoded one. Jesse adds support for user to control writeback frequency. Chinh refactors DCB variables out of the ice_port_info struct. Bruce removes some unnecessary casting. Mitch fixes an error message that was reported as if_up instead of if_down. Tony adjusts fallback allocation for MSI-X to use all given vectors instead of using only the minimum configuration and updates documentation for the ice driver. ==================== Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: cleanup for endian issue for VF RSSJian Shen
Currently the RSS commands of VF are using host byte order. According to the user manual, it should use little endian in the command to firmware. For the host and firmware are both using little endian, so it can work well in this case. Do cleanup to make it more explicitly. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove unused macro definitionPeng Li
Some macros are defined but unused, so remove them. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove an unused parameter in hclge_vf_rate_param_check()Huazhong Tan
Parameter vf in hclge_vf_rate_param_check() is unused now, so remove it. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove redundant return value of hns3_uninit_all_ring()Huazhong Tan
Since hns3_uninit_all_ring() only returns 0, so remove this redundant return value and function declaration in hns3_enet.h. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: change hclge_query_bd_num() param typePeng Li
The type of parameter mpf_bd_num and pf_bd_num in hclge_query_bd_num() should be u32* instead of int*, so change them. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: change hclge_parse_speed() param typePeng Li
The type of parameters in hclge_parse_speed() should be unsigned type, so change them. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: modify some unmacthed types print parameterJiaran Zhang
Fix an issue where the formatting symbol of the formatting input and output function does not match the actual type. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: clean up unnecessary parentheses in macro definitionsYufeng Mo
In macro definitions, parentheses are unnecessary in some cases, such as the calling parameter of a function, the left variable of the equal sign, and so on. So remove these unnecessary parentheses according to these rules. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove the shaper param magic numberPeng Li
To make the code more readable, this patch adds a definition for the magic number 126 used for the default shaper param ir_b, and rename macro DIVISOR_IR_B_126. No functional change. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: remove redundant client_setup_tc handleJian Shen
Since the real tx queue number and real rx queue number always be updated when netdev opens, it's redundant to call hclge_client_setup_tc to do the same thing. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: clean up some incorrect variable types in hclge_dbg_dump_tm_map()Yonglong Liu
queue_id, qset_id and other IDs are unsigned type, so modify the corresponding local variables' type in hclge_dbg_dump_tm_map() from signed to unsigned. kstrtouint() and the print format should be updated as well. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for index in hclge_get_rss_key()Yufeng Mo
The index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this index before using it in hclge_get_rss_key(). Fixes: a638b1d8cc87 ("net: hns3: fix get VF RSS issue") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()Yufeng Mo
The tqp_index is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this tqp_index before using it in hclge_get_ring_chain_from_mbx(). Fixes: 84e095d64ed9 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: hns3: add a check for queue_id in hclge_reset_vf_queue()Yufeng Mo
The queue_id is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this queue_id before using it in hclge_reset_vf_queue(). Fixes: 1a426f8b40fc ("net: hns3: fix the VF queue reset flow error") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge tag 'imx-drivers-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.12: - Change soc-imx8m to use platform driver, so that defer probe can be used to resolve dependency on OCOTP clock. * tag 'imx-drivers-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: change to use platform driver Link: https://lore.kernel.org/r/20210204120150.26186-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-10Merge tag 'qcom-drivers-for-5.12' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 5.12 The socinfo driver gains support for dumping information about the platform's PMICs, as well as new definitions for a number of platforms. The LLCC driver gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains support for MSM8994 power domains. In addition to this it contains a few minor fixes in the ocmem, rpmh and llcc drivers. * tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: ocmem: don't return NULL in of_get_ocmem soc: qcom: socinfo: Remove unwanted le32_to_cpu() soc: qcom: aoss: Add SM8350 compatible drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model() soc: qcom: socinfo: Fix off-by-one array index bounds check soc: qcom: socinfo: Add MDM9607 IDs soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998 soc: qcom: socinfo: Add SoC IDs for 630 family soc: qcom: socinfo: Open read access to all for debugfs soc: qcom: socinfo: add info from PMIC models array soc: qcom: socinfo: add several PMIC IDs soc: qcom: socinfo: add qrb5165 SoC ID soc: qcom: rpmh: Remove serialization of TCS commands soc: qcom: smem: use %*ph to print small buffer dt-bindings: soc: qcom: convert qcom,smem bindings to yaml drivers: qcom: rpmh-rsc: Do not read back the register write on trigger soc: qcom: llcc-qcom: Add support for SM8250 SoC soc: qcom: llcc-qcom: Extract major hardware version dt-bindings: msm: Add LLCC for SM8250 Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-09dm writecache: use bdev_nr_sectors() instead of open-coded equivalentMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 12:16:06 +0000