| Age | Commit message (Collapse) | Author |
|---|
|
RF Interference Mitigation is a new feature targeted to handle the
problem of interference between DDR memory and WiFi. The role of
the driver is to configure FW with the table holding a mapping
between problematic channels/bands and the corresponding frequencies.
This patch adds RFI infrastructure and adds two debugfs hooks:
- send RFI configuration command (currently with a default table) which
will reset feature in the FW
- read the table, used by the FW (which can be a subset of the table
that driver sent).
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210210171218.2cea55a09bc7.I634b79795abad499ce442631d6672ffef8fc6d41@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
This entry used when skipping the parser needed,
for example, the custom header pretended to ethernet header.
Suggested-by: Liron Himi <liron@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register set_link_ksetting callback with driver such that
link configurations parameters like advertised mode,speed, duplex
and autoneg can be configured.
below command
ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register get_link_ksettings callback to get link status information
from the driver. As virtual function (vf) shares same physical link
same API is used for both the drivers and for loop back drivers
simply returns the fixed values as its does not have physical link.
ethtool eth3
Settings for eth3:
Supported ports: [ ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
10000baseKR/Full
1000baseX/Full
Supports auto-negotiation: No
Supported FEC modes: BaseR RS
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: None
ethtool lbk0
Settings for lbk0:
Speed: 100000Mb/s
Duplex: Full
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CGX supports setting advertised link modes on physical link.
This patch adds support to derive cgx mode from ethtool
link mode and pass it to firmware to configure the same.
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CGX LMAC, the physical interface support link configuration parameters
like speed, auto negotiation, duplex etc. Firmware saves these into
memory region shared between firmware and this driver.
This patch adds mailbox handler set_link_mode, fw_data_get to
configure and read these parameters.
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool support to configure fec modes baser/rs and
support to fecth FEC stats from CGX as well PHY.
Configure fec mode
- ethtool --set-fec eth0 encoding rs/baser/off/auto
Query fec mode
- ethtool --show-fec eth0
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support to fetch fec stats from PHY. The stats are
put in the shared data struct fwdata. A PHY driver indicates
that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats
Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and
CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync
with firmware's enum list.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CGX block supports forward error correction modes baseR
and RS. This patch adds support to set encoding mode
and to read corrected/uncorrected block counters
Adds new mailbox handlers set_fec to configure encoding modes
and fec_stats to read counters and also increase mbox timeout
to accomdate firmware command response timeout.
Along with new CGX_CMD_SET_FEC command add other commands to
sync with kernel enum list with firmware.
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pavel pointed that the return of dma_addr_t in
otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative
error code may be returned in some cases. For a dma_addr_t, the error
code such as -ENOMEM does seem a valid value, so we can't judge if the
buffer allocation fail or not based on that value. Add a parameter for
otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make
the return value to indicate if the buffer allocation really fail or
not.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MBIM has initially been specified by USB-IF for transporting data (IP)
between a modem and a host over USB. However some modern modems also
support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it
allows to aggregate IP packets and to perform context multiplexing.
This change adds minimal MBIM data transport support to MHI, allowing
to support MBIM only modems. MBIM being based on USB NCM, it reuses
and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim).
Note that is a subset of the CDC-MBIM specification, supporting only
transport of network data (IP), there is no support for DSS. Moreover
the multi-session (for multi-pdn) is not supported in this initial
version, but will be added latter, and aligned with the cdc-mbim
solution (VLAN tags).
This code has been inspired from the mhi_mbim downstream implementation
(Carl Yin <carl.yin@quectel.com>).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This can be used by proto when packet len is incorrect.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move mhi-net shared structures to mhi header, that will be used by
upcoming proto(s).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create a dedicated mhi directory for mhi-net, mhi-net is going to
be split into differente files (for additional protocol support).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MHI can transport different protocols, some are handled at upper level,
like IP and QMAP(rmnet/netlink), but others will need to be inside MHI
net driver, like mbim. This change adds support for protocol rx and
tx_fixup callbacks registration, that can be used to encode/decode the
targeted protocol.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Collect serial config version information directly from an internal
register, instead of explicitly resizing VPD.
v2:
- Add comments on info stored in PCIE_STATIC_SPARE2 register.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
WARN_ON(in_interrupt()) is used for historic reasons to ensure proper usage
of down_read() and predates might_sleep() and lockdep.
down_read() has might_sleep() which also catches users from preemption
disabled regions while in_interrupt() does not.
Remove WARN_ON(in_interrupt()) because there are now better debugging
facilities.
Link: https://lore.kernel.org/r/20210208194400.384003-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The variable ret is overwritten by the following call
i40e_clean_arq_element() and the assignment is useless, so remove it.
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Allow user to specify VLAN field and add it to flow director. Show VLAN
field in "ethtool -n ethx" command.
Handle VLAN type and tag field provided by ethtool command. Refactored
filter addition, by replacing static arrays with runtime dummy packet
creation, which allows specifying VLAN field.
Previously, VLAN field was omitted.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Flow director for IPv6 is not supported.
1) Implementation of support for IPv6 flow director.
2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6.
3) Refactored legacy code to make it more generic.
4) Added packet templates for TCP6, UDP6, SCTP6, IPv6.
5) Added handling of IPv6 source and destination address for flow director.
6) Improved argument passing for source and destination portin TCP6, UDP6
and SCTP6.
7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6.
8) Used correct bit flag regarding FLEXOFF field of flow director data
descriptor.
Without this patch, there would be no support for flow director on IPv6,
TCP6, UDP6, SCTP6.
Tested based on x710 datasheet by using:
ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1
ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2
ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3
ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4
ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5
ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6
ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7
ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8
Then send traffic from client which matches the criteria provided to ethtool.
Observe that packets are redirected to user set queues with ethtool -S <interface>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement Energy Efficient Ethernet (EEE) status getting & setting.
The i40e_get_eee() requesting PHY EEE capabilities from firmware.
The i40e_set_eee() function requests PHY EEE capabilities
from firmware and sets PHY EEE advertising to full abilities or 0
depending whether EEE is to be enabled or disabled.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add callbacks used by software based LLDP agent, which allows to
configure DCB feature from userspace.
Update copyright dates as appropriate.
If LLDP agent is turned off in BIOS, or after setting private flag
("disable-fw-lldp on"). The driver initialized DCB functionality with
default values, one traffic class with 100% bandwidth allocated.
The new netlink callbacks are required for software LLDP agent, it
must be able to acquire current DCB configuration of a network port
and apply DCB configuration changes, if required.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add extra handling on changing the "disable-fw-lldp" private
flag to properly initialize software based DCB feature.
Add default configuration of DCB functionality when Firmware
LLDP agent is turned off, in case of driver probe and device
reset on reconfiguration.
Update copyright dates as appropriate.
Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.
Default configuration and new initialization flow for software based
DCB is required. If LLDP agent is turned off in BIOS, or after
setting private flag ("disable-fw-lldp on"). The driver initializes
DCB functionality with default values, one traffic class with 100%
bandwidth allocated.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add registers and definitions required for applying
DCB related hardware configuration.
Add functions responsible for calculating and setting proper
hardware configuration values for software based DCB functionality.
Add function responsible for invoking Admin Queue command, which
results in applying new DCB configuration to the hardware.
Update copyright dates as appropriate.
Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.
New communication channel between software and hardware is required
for software driver. It must be able to calculate and configure all
the registers related for DCB feature.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
|
|
Since commit 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271
a module") the max9271 library is built as a module but no
MODULE_*() attributes were specified, causing a build error
due to missing license information.
ERROR: modpost: missing MODULE_LICENSE() in drivers/media/i2c/max9271.o
Fix this by adding MODULE attributes to the driver.
Fixes: 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Address a performance regression related to scale-invariance on x86
that may prevent turbo CPU frequencies from being used in certain
workloads on systems using acpi-cpufreq as the CPU performance scaling
driver and schedutil as the scaling governor"
* tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there
cpufreq: ACPI: Extend frequency tables to cover boost frequencies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPICA commit that changed the code to attempt to
update memory regions which may be read-only on some systems (Ard
Biesheuvel)"
* tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Some late fixes for dmaengine:
Core:
- fix channel device_node deletion
Driver fixes:
- dw: revert of runtime pm enabling
- idxd: device state fix, interrupt completion and list corruption
- ti: resource leak
* tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine dw: Revert "dmaengine: dw: Enable runtime PM"
dmaengine: idxd: check device state before issue command
dmaengine: ti: k3-udma: Fix a resource leak in an error handling path
dmaengine: move channel device_node deletion to driver
dmaengine: idxd: fix misc interrupt completion
dmaengine: idxd: Fix list corruption in description completion
|
|
Pull networking fixes from David Miller:
"Another pile of networing fixes:
1) ath9k build error fix from Arnd Bergmann
2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.
3) bpf int3 kprobe fix from Alexei Starovoitov.
4) bpf stackmap integer overflow fix from Bui Quang Minh.
5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
Christoph Schemmel.
6) Don't update deleted entry in xt_recent netfilter module, from
Jazsef Kadlecsik.
7) Use after free in nftables, fix from Pablo Neira Ayuso.
8) Header checksum fix in flowtable from Sven Auhagen.
9) Validate user controlled length in qrtr code, from Sabyrzhan
Tasbolatov.
10) Fix race in xen/netback, from Juergen Gross,
11) New device ID in cxgb4, from Raju Rangoju.
12) Fix ring locking in rxrpc release call, from David Howells.
13) Don't return LAPB error codes from x25_open(), from Xie He.
14) Missing error returns in gsi_channel_setup() from Alex Elder.
15) Get skb_copy_and_csum_datagram working properly with odd segment
sizes, from Willem de Bruijn.
16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.
17) Do teardown on probe failure in DSA, from Vladimir Oltean.
18) Fix compilation failures of txtimestamp selftest, from Vadim
Fedorenko.
19) Limit rx per-napi gro queue size to fix latency regression, from
Eric Dumazet.
20) dpaa_eth xdp fixes from Camelia Groza.
21) Missing txq mode update when switching CBS off, in stmmac driver,
from Mohammad Athari Bin Ismail.
22) Failover pending logic fix in ibmvnic driver, from Sukadev
Bhattiprolu.
23) Null deref fix in vmw_vsock, from Norbert Slusarek.
24) Missing verdict update in xdp paths of ena driver, from Shay
Agroskin.
25) seq_file iteration fix in sctp from Neil Brown.
26) bpf 32-bit src register truncation fix on div/mod, from Daniel
Borkmann.
27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.
28) Fix locking in vsock_shutdown(), from Stefano Garzarella.
29) Various missing index bound checks in hns3 driver, from Yufeng Mo.
30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
Vladimir Oltean.
31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
Vultur.
32) Fix locking during netif_tx_disable(), from Edwin Peer"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
bpf: Fix 32 bit src register truncation on div/mod
bpf: Fix verifier jmp32 pruning decision logic
bpf: Fix verifier jsgt branch analysis on max bound
vsock: fix locking in vsock_shutdown()
net: hns3: add a check for index in hclge_get_rss_key()
net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
net: hns3: add a check for queue_id in hclge_reset_vf_queue()
net: dsa: felix: implement port flushing on .phylink_mac_link_down
switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
net: watchdog: hold device global xmit lock during tx disable
netfilter: nftables: relax check for stateful expressions in set definition
netfilter: conntrack: skip identical origin tuple in same zone only
vsock/virtio: update credit only if socket is not closed
net: fix iteration for sctp transport seq_files
net: ena: Update XDP verdict upon failure
net/vmw_vsock: improve locking in vsock_connect_timeout()
net/vmw_vsock: fix NULL pointer dereference
ibmvnic: Clear failover_pending if unable to schedule
net: stmmac: set TxQ mode back to DCB after disabling CBS
...
|
|
There is no need to do spin_lock_irqsave in context of hard IRQ, so
replace them with spin_lock.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1612863742-1551-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix the writeset tree equality test function to use the right value size
when comparing two btree values.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Deallocate the memory allocated for the in-core bitsets when destroying
the target and in error paths.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-era doesn't support changing the data block size of existing devices,
so check explicitly that the requested block size for a new target
matches the one stored in the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Reviewed-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
In case of devices with at most 64 blocks, the digestion of consecutive
eras uses the writeset of the first era as the writeset of all eras to
digest, leading to lost writes. That is, we lose the information about
what blocks were written during the affected eras.
The digestion code uses a dm_disk_bitset object to access the archived
writesets. This structure includes a one word (64-bit) cache to reduce
the number of array lookups.
This structure is initialized only once, in metadata_digest_start(),
when we kick off digestion.
But, when we insert a new writeset into the writeset tree, before the
digestion of the previous writeset is done, or equivalently when there
are multiple writesets in the writeset tree to digest, then all these
writesets are digested using the same cache and the cache is not
re-initialized when moving from one writeset to the next.
For devices with more than 64 blocks, i.e., the size of the cache, the
cache is indirectly invalidated when we move to a next set of blocks, so
we avoid the bug.
But for devices with at most 64 blocks we end up using the same cached
data for digesting all archived writesets, i.e., the cache is loaded
when digesting the first writeset and it never gets reloaded, until the
digestion is done.
As a result, the writeset of the first era to digest is used as the
writeset of all the following archived eras, leading to lost writes.
Fix this by reinitializing the dm_disk_bitset structure, and thus
invalidating the cache, every time the digestion code starts digesting a
new writeset.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
In case of a system crash, dm-era might fail to mark blocks as written
in its metadata, although the corresponding writes to these blocks were
passed down to the origin device and completed successfully.
Consider the following sequence of events:
1. We write to a block that has not been yet written in the current era
2. era_map() checks the in-core bitmap for the current era and sees
that the block is not marked as written.
3. The write is deferred for submission after the metadata have been
updated and committed.
4. The worker thread processes the deferred write
(process_deferred_bios()) and marks the block as written in the
in-core bitmap, **before** committing the metadata.
5. The worker thread starts committing the metadata.
6. We do more writes that map to the same block as the write of step (1)
7. era_map() checks the in-core bitmap and sees that the block is marked
as written, **although the metadata have not been committed yet**.
8. These writes are passed down to the origin device immediately and the
device reports them as completed.
9. The system crashes, e.g., power failure, before the commit from step
(5) finishes.
When the system recovers and we query the dm-era target for the list of
written blocks it doesn't report the aforementioned block as written,
although the writes of step (6) completed successfully.
The issue is that era_map() decides whether to defer or not a write
based on non committed information. The root cause of the bug is that we
update the in-core bitmap, **before** committing the metadata.
Fix this by updating the in-core bitmap **after** successfully
committing the metadata.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Following a system crash, dm-era fails to recover the committed writeset
for the current era, leading to lost writes. That is, we lose the
information about what blocks were written during the affected era.
dm-era assumes that the writeset of the current era is archived when the
device is suspended. So, when resuming the device, it just moves on to
the next era, ignoring the committed writeset.
This assumption holds when the device is properly shut down. But, when
the system crashes, the code that suspends the target never runs, so the
writeset for the current era is not archived.
There are three issues that cause the committed writeset to get lost:
1. dm-era doesn't load the committed writeset when opening the metadata
2. The code that resizes the metadata wipes the information about the
committed writeset (assuming it was loaded at step 1)
3. era_preresume() starts a new era, without taking into account that
the current era might not have been archived, due to a system crash.
To fix this:
1. Load the committed writeset when opening the metadata
2. Fix the code that resizes the metadata to make sure it doesn't wipe
the loaded writeset
3. Fix era_preresume() to check for a loaded writeset and archive it,
before starting a new era.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
|
|
|
|
Replace the ACPI_DEBUG_PRINT() instance in osl.c unrelated to the
ACPICA debug with acpi_handle_debug(), add a pr_fmt() definition
to osl.c and replace direct printk() usage in that file with the
suitable pr_*() calls.
While at it, add a physical address value to the message in
acpi_os_map_iomem() and reword a couple of messages to avoid
using function names in them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove additional blank line from include/autoconf.h, fixes one
checkpatch check notice.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210210170024.100937-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add IDs for the controllers found on Intel Lynxpoint.
In particular it's Macbook Air 6,2 devices.
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210208163816.22147-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Wildcat Point has two SPI controllers and added one is actually second one.
Fix the numbering by adding the description of the first one.
Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH")
Cc: Leif Liddy <leif.liddy@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Liao Pingfang <winndows@163.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some Amazon NVMe controllers do not follow the NVMe specification
and are limited to 48-bit DMA addresses. Add a quirk to force
bounce buffering if needed and limit the IOVA allocation for these
devices.
This affects all current Amazon NVMe controllers that expose EBS
volumes (0x0061, 0x0065, 0x8061) and local instance storage
(0xcd00, 0xcd01, 0xcd02).
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The original design to use device-managed resource allocation
doesn't really work as the NVMe controller has a vastly different
lifetime than the hwmon sysfs attributes, causing warning about
duplicate sysfs entries upon reconnection.
This patch reworks the hwmon allocation to avoid device-managed
resource allocation, and uses the NVMe controller as parent for
the sysfs attributes.
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Enzo Matsumiya <ematsumiya@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_parse_io_cmd() returns value from
nvmet_file_parse_io_cmd() or nvmet_bdev_parse_io_cmd() based on which
backend is set for the request. Remove the else and just return the
value from nvmet_bdev_parse_io_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Just like what we have to get the passthru ctrl from the req, add an
helper to get the subsystem associated with the nvmet_req() instead
of open coding the chain of structures.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In function __assign_req_name() instead of using the DEVICE_NAME_LEN in
strncpy() use min of DISK_NAME_LEN and strlen(req->ns->device_path).
This is needed to turn off the following warnings:-
In file included from drivers/nvme/target/core.c:14:
In function ‘__assign_req_name’,
inlined from ‘trace_event_raw_event_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(name, req->ns->device_path, DISK_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
inlined from ‘perf_trace_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(name, req->ns->device_path, DISK_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
inlined from ‘perf_trace_nvmet_req_init’ at drivers/nvme/target/./trace.h:58:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(name, req->ns->device_path, DISK_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘__assign_req_name’,
inlined from ‘trace_event_raw_event_nvmet_req_complete’ at drivers/nvme/target/./trace.h:100:1:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
strncpy(name, req->ns->device_path, DISK_NAME_LEN);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In the NVMeOF block device backend, file backend, and passthru backend
we reject and report the commands if opcode is not handled.
Use the previously introduced helper in the passthru backend to make the
error message uniform.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
