summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-11virtio-net: fix mismatch of getting tx-framesHeng Qi
Since virtio-net allows switching napi_tx for per txq, we have to get the specific txq's result now. Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: initially change the value of tx-framesHeng Qi
Background: 1. Commit 0c465be183c7 ("virtio_net: ethtool tx napi configuration") uses tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing is not supported. 2. Commit 31c03aef9bc2 ("virtio_net: enable napi_tx by default") enables napi_tx for all txqs by default. Status: When virtio-net supports notification coalescing, after initialization, tx-frames is 0 and napi_tx is true. Problem: When the user only wants to set rx coalescing params using ethtool -C eth0 rx-usecs 10, or ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10, these cmds will carry tx-frames as 0, causing the napi_tx switching condition is satisfied. Then the user gets: netlink error: Device or resource busy. The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx... How to fix: When notification coalescing feature is negotiated, initially make the value of tx-frames to be consistent with napi_tx. For compatibility with the past, it is still supported to use tx-frames to toggle napi_tx. Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-10net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_readJavier Carrasco
syzbot has found an uninit-value bug triggered by the dm9601 driver [1]. This error happens because the variable res is not updated if the call to dm_read_shared_word returns an error. In this particular case -EPROTO was returned and res stayed uninitialized. This can be avoided by checking the return value of dm_read_shared_word and propagating the error if the read operation failed. [1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955 Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com Acked-by: Peter Korsgaard <peter@korsgaard.com> Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver") Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: realtek: rtl8365mb: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8365mb-c-v1-1-0537fe9fb08c@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: realtek: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8366-core-c-v1-1-74e1b5190778@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: qca8k: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-qca-qca8k-common-c-v1-1-34c8040e0f32@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'linux-can-fixes-for-6.6-20231009' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-10-09 Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state detection and wait behavior. John Watts contributes a patch to only show the sun4i_can Kconfig option on ARCH_SUNXI. A patch by Miquel Raynal fixes the soft-reset workaround for Renesas SoCs in the sja1000 driver. Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver fixes the id2 register for the tcan4553. 2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC. * tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: Fix id2_register for tcan4553 can: flexcan: remove the auto stop mode for IMX93 can: sja1000: Always restart the Tx queue after an overrun arm64: dts: imx93: add the Flex-CAN stop mode by GPR can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior ==================== Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10appletalk: remove ipddp driverArnd Bergmann
After the cops driver is removed, ipddp is now the only CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users and can be removed, making appletalk support purely based on ethertalk, using ethernet hardware. Link: https://lore.kernel.org/netdev/e490dd0c-a65d-4acf-89c6-c06cb48ec880@app.fastmail.com/ Link: https://lore.kernel.org/netdev/9cac4fbd-9557-b0b8-54fa-93f0290a6fb8@schmorgal.com/ Cc: Doug Brown <doug@schmorgal.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231009141139.1766345-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'xsa441-6.6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for the xen events driver: Closing of an event channel in the Linux kernel can result in a deadlock. This happens when the close is being performed in parallel to an unrelated Xen console action and the handling of a Xen console interrupt in an unprivileged guest. The closing of an event channel is e.g. triggered by removal of a paravirtual device on the other side. As this action will cause console messages to be issued on the other side quite often, the chance of triggering the deadlock is not negligible" * tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: replace evtchn_rwlock with RCU
2023-10-10Merge tag 'irq-urgent-2023-10-10-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of updates for interrupt chip drivers: - Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is caused by a control bit being moved to a different location - Update the SM8150 device tree PDC resource so the version register can be read - Make the Renesas RZG2L driver correct for interrupts which are outside of the LSB in the TSSR register by using the proper macro for calculating the mask - Document the Renesas RZ2GL device tree binding correctly and update them for a few devices which faul to boot otherwise - Use the proper accessor in the RZ2GL driver instead of blindly dereferencing an unchecked pointer - Make GICv3 handle the dma-non-coherent attribute correctly - Ensure that all interrupt controller nodes on RISCV are marked as initialized correctly Maintainer changes: - Add a new entry for GIC interrupt controllers and assign Marc Zyngier as the maintainer - Remove Marc Zyngier from the core and driver maintainer entries as he is burried in work and short of time to handle that. Thanks to Marc for all the great work he has done in the past couple of years! Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for v3.2 HW") has a incorrect SOB chain. The real author is Neil. His patch was posted by Dmitry once and Neil picked it up from the list and reposted it with the bogus SOB chain. Not a big deal, but worth to mention. I wanted to fix that up, but then got distracted and Marc piled more changes on top. So I decided to leave it as is instead of rebasing world" * tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove myself from the general IRQ subsystem maintenance MAINTAINERS: Add myself as the ARM GIC maintainer irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data() irqchip/stm32-exti: add missing DT IRQ flag translation irqchip/riscv-intc: Mark all INTC nodes as initialized irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing irqchip/gic-v3-its: Split allocation from initialisation of its_node dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property arm64: dts: qcom: sm8150: extend the size of the PDC resource irqchip/qcom-pdc: Add support for v3.2 HW
2023-10-10Merge tag 'v6.6-p4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a regression in dm-crypt" * tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: dm crypt: Fix reqsize in crypt_iv_eboiv_gen
2023-10-10net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestampWill Mortensen
Commit 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") seems to have accidentally inverted the logic added in commit 0bc73ad46a76 ("net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp"). The impact of this is a little unclear since it seems the FCS scattered with RX-FCS is (usually?) correct regardless. Fixes: 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") Tested-by: Charlotte Tan <charlotte@extrahop.com> Reviewed-by: Charlotte Tan <charlotte@extrahop.com> Cc: Adham Faris <afaris@nvidia.com> Cc: Aya Levin <ayal@nvidia.com> Cc: Tariq Toukan <tariqt@nvidia.com> Cc: Moshe Shemesh <moshe@nvidia.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Will Mortensen <will@extrahop.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10atm: fore200e: Drop unnecessary of_match_device()Rob Herring
It is not necessary to call of_match_device() in probe. If we made it to probe, then we've already successfully matched. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231006214421.339445-1-robh@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10mlxsw: spectrum_ethtool: Fix -Wformat-truncation warningIdo Schimmel
Ethtool stats strings cannot be longer than 32 characters ('ETH_GSTRING_LEN'), including the terminating null byte. The format string '%.29s_%.1d' can exceed this limitation if the per-TC counter name exceeds 28 characters. Together with the underscore, the two digits of the TC (bounded at 16) and the terminating null byte, more than 32 characters will be used. Fix this by bounding the counter name at 28 characters which suppresses the following build warning [1]. This does not affect ethtool output since the longest counter name does not exceed this limitation. [1] drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10mlxsw: core_thermal: Fix -Wformat-truncation warningIdo Schimmel
The name of a thermal zone device cannot be longer than 19 characters ('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-gearbox%d' can exceed this limitation if the maximum number of line cards and the maximum number of gearboxes on each line card cannot be represented using a single digit. This is not the case with current systems nor future ones. Therefore, increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and suppress the following build warning [1]. If this limitation is ever exceeded, we will know about it since the thermal core validates the thermal device's name during registration. [1] drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_gearboxes_init.constprop’: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:71: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 1 and 3 [-Werror=format-truncation=] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~ In function ‘mlxsw_thermal_gearbox_tz_init’, inlined from ‘mlxsw_thermal_gearboxes_init.constprop’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:611:9: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:52: note: directive argument in the range [1, 255] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:17: note: ‘snprintf’ output between 19 and 23 bytes into a destination of size 20 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 544 | gearbox_tz->slot_index, gearbox_tz->module + 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net/smc: Fix dependency of SMC on ISMGerd Bayer
When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/ Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10ixgbe: fix crash with empty VF macvlan listDan Carpenter
The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net: dsa: microchip: Fix uninitialized var in ksz9477_acl_move_entries()Oleksij Rempel
Address an issue in ksz9477_acl_move_entries() where, in the scenario (src_idx == dst_idx), ksz9477_validate_and_get_src_count() returns 0, leading to usage of uninitialized src_count and dst_count variables, which causes undesired behavior as it attempts to move ACL entries around. Fixes: 002841be134e ("net: dsa: microchip: Add partial ACL support for ksz9477 switches") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231006115822.144152-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net/mlx5e: macsec: use update_pn flag instead of PN comparationRadu Pirea (NXP OSS)
When updating the SA, use the new update_pn flags instead of comparing the new PN with the initial one. Comparing the initial PN value with the new value will allow the user to update the SA using the initial PN value as a parameter like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 off Fixes: 8ff0ac5be144 ("net/mlx5: Add MACsec offload Tx command support") Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net: phy: mscc: macsec: reject PN update requestsRadu Pirea (NXP OSS)
Updating the PN is not supported. Return -EINVAL if update_pn is true. The following command succeeded, but it should fail because the driver does not update the PN: ip macsec set macsec0 tx sa 0 pn 232 on Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10octeontx2-pf: mcs: update PN only when update_pn is trueRadu Pirea (NXP OSS)
When updating SA, update the PN only when the update_pn flag is true. Otherwise, the PN will be reset to its previous value using the following command and this should not happen: $ ip macsec set macsec0 tx sa 0 on Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net: macsec: indicate next pn update when offloadingRadu Pirea (NXP OSS)
Indicate next PN update using update_pn flag in macsec_context. Offloaded MACsec implementations does not know whether or not the MACSEC_SA_ATTR_PN attribute was passed for an SA update and assume that next PN should always updated, but this is not always true. The PN can be reset to its initial value using the following command: $ ip macsec set macsec0 tx sa 0 off #octeontx2-pf case Or, the update PN command will succeed even if the driver does not support PN updates. $ ip macsec set macsec0 tx sa 0 pn 1 on #mscc phy driver case Comparing the initial PN with the new PN value is not a solution. When the user updates the PN using its initial value the command will succeed, even if the driver does not support it. Like this: $ ip macsec add macsec0 tx sa 0 pn 1 on key 00 \ ead3664f508eb06c40ac7104cdae4ce5 $ ip macsec set macsec0 tx sa 0 pn 1 on #mlx5 case Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10scsi: Do not rescan devices with a suspended queueDamien Le Moal
Commit ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices") modified scsi_rescan_device() to avoid attempting rescanning a suspended device. However, the modification added a check to verify that a SCSI device is in the running state without checking if the device request queue (in the case of block device) is also running, thus allowing the exectuion of internal requests. Without checking the device request queue, commit ff48b37802e5 fix is incomplete and deadlocks on resume can still happen. Use blk_queue_pm_only() to check if the device request queue allows executing commands in addition to checking the SCSI device state. Reported-by: Petr Tesarik <petr@tesarici.cz> Fixes: ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices") Cc: stable@vger.kernel.org Tested-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-10ata: pata_parport: fit3: implement IDE command set registersOndrej Zary
fit3 protocol driver does not support accessing IDE control registers (device control/altstatus). The DOS driver does not use these registers either (as observed from DOSEMU trace). But the HW seems to be capable of accessing these registers - I simply tried bit 3 and it works! The control register is required to properly reset ATAPI devices or they will be detected only once (after a power cycle). Tested with EXP Computer CD-865 with MC-1285B EPP cable and TransDisk 3000. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-10ata: pata_parport: add custom version of wait_after_resetOndrej Zary
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return bogus values when there's no master device present. This can cause reset to fail, preventing the lone slave device (such as EXP Computer CD-865) from working. Add custom version of wait_after_reset that ignores master failure when a slave device is present. The custom version is also needed because the generic ata_sff_wait_after_reset uses direct port I/O for slave device detection. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-10ata: pata_parport: implement set_devctlOndrej Zary
Add missing ops->sff_set_devctl implementation. Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-10ata: pata_parport: fix pata_parport_devchkOndrej Zary
There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the detection to always fail. Fix it. Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-10-09cavium/liquidio: replace deprecated strncpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect `app_name` to be NUL-terminated: dev_info(&oct->pci_dev->dev, "Running %s (%llu Hz)\n", app_name, CVM_CAST64(cs->corefreq)); ... and it seems NUL-padding is not required, let's opt for strscpy(). For `oct->boardinfo.name/serial_number` let's opt for strscpy() as well since it is expected to be NUL-terminated and does not require NUL-padding as `oct` is zero-initialized in octeon_device.c +707: | buf = vzalloc(size); | if (!buf) | return NULL; | | oct = (struct octeon_device *)buf; Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-octeon_device-c-v1-1-9a207cef9438@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09liquidio: replace deprecated strncpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as rep_cfg is memset to 0: | memset(&rep_cfg, 0, sizeof(rep_cfg)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_vf_rep-c-v1-1-92123a747780@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09net: liquidio: replace deprecated strncpy with strscpy_padJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We know `fw_type` must be NUL-terminated based on use here: | static bool fw_type_is_auto(void) | { | return strncmp(fw_type, LIO_FW_NAME_TYPE_AUTO, | sizeof(LIO_FW_NAME_TYPE_AUTO)) == 0; | } ...and here | module_param_string(fw_type, fw_type, sizeof(fw_type), 0444); Let's opt to NUL-pad the destination buffer as well so that we maintain the same exact behavior that `strncpy` provided here. A suitable replacement is `strscpy_pad` due to the fact that it guarantees both NUL-termination and NUL-padding on the destination buffer. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_main-c-v1-1-663e3f1d8f99@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09liquidio: replace deprecated strncpy/strcpy with strscpyJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. NUL-padding is not required as drvinfo is memset to 0: | memset(drvinfo, 0, sizeof(struct ethtool_drvinfo)); A suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-cavium-liquidio-lio_ethtool-c-v1-1-ab565ab4d197@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09bcm63xx_enet: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. A suitable replacement is strscpy() [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. bcm_enet_get_drvinfo() already uses strscpy(), let's match it's implementation: | static void bcm_enet_get_drvinfo(struct net_device *netdev, | struct ethtool_drvinfo *drvinfo) | { | strscpy(drvinfo->driver, bcm_enet_driver_name, sizeof(drvinfo->driver)); | strscpy(drvinfo->bus_info, "bcm63xx", sizeof(drvinfo->bus_info)); | } Note that now bcm_enet_get_drvinfo() and bcm_enetsw_get_drvinfo() do the exact same thing. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231005-strncpy-drivers-net-ethernet-broadcom-bcm63xx_enet-c-v1-1-6823b3c3c443@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-09xen/events: replace evtchn_rwlock with RCUJuergen Gross
In unprivileged Xen guests event handling can cause a deadlock with Xen console handling. The evtchn_rwlock and the hvc_lock are taken in opposite sequence in __hvc_poll() and in Xen console IRQ handling. Normally this is no problem, as the evtchn_rwlock is taken as a reader in both paths, but as soon as an event channel is being closed, the lock will be taken as a writer, which will cause read_lock() to block: CPU0 CPU1 CPU2 (IRQ handling) (__hvc_poll()) (closing event channel) read_lock(evtchn_rwlock) spin_lock(hvc_lock) write_lock(evtchn_rwlock) [blocks] spin_lock(hvc_lock) [blocks] read_lock(evtchn_rwlock) [blocks due to writer waiting, and not in_interrupt()] This issue can be avoided by replacing evtchn_rwlock with RCU in xen_free_irq(). Note that RCU is used only to delay freeing of the irq_info memory. There is no RCU based dereferencing or replacement of pointers involved. In order to avoid potential races between removing the irq_info reference and handling of interrupts, set the irq_info pointer to NULL only when freeing its memory. The IRQ itself must be freed at that time, too, as otherwise the same IRQ number could be allocated again before handling of the old instance would have been finished. This is XSA-441 / CVE-2023-34324. Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Julien Grall <jgrall@amazon.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-10-08net: bcmgenet: Remove custom ndo_poll_controller()Florian Fainelli
The driver gained a .ndo_poll_controller() at a time where the TX cleaning process was always done from NAPI which makes this unnecessary. See commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") for more background. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-08ice: block default rule setting on LAG interfaceMichal Swiatkowski
When one of the LAG interfaces is in switchdev mode, setting default rule can't be done. The interface on which switchdev is running has ice_set_rx_mode() blocked to avoid default rule adding (and other rules). The other interfaces (without switchdev running but connected via bond with interface that runs switchdev) can't follow the same scheme, because rx filtering needs to be disabled when failover happens. Notification for bridge to set promisc mode seems like good place to do that. Fixes: bb52f42acef6 ("ice: Add driver support for firmware changes for LAG") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-08xen-netback: use default TX queue size for vifsRoger Pau Monne
Do not set netback interfaces (vifs) default TX queue size to the ring size. The TX queue size is not related to the ring size, and using the ring size (32) as the queue size can lead to packet drops. Note the TX side of the vif interface in the netback domain is the one receiving packets to be injected to the guest. Do not explicitly set the TX queue length to any value when creating the interface, and instead use the system default. Note that the queue length can also be adjusted at runtime. Fixes: f942dc2552b8 ('xen network backend driver') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-08mlxsw: fix mlxsw_sp2_nve_vxlan_learning_set() return typeDan Carpenter
The mlxsw_sp2_nve_vxlan_learning_set() function is supposed to return zero on success or negative error codes. So it needs to be type int instead of bool. Fixes: 4ee70efab68d ("mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-07ieee802154: ca8210: Fix a potential UAF in ca8210_probeDinghao Liu
If of_clk_add_provider() fails in ca8210_register_ext_clock(), it calls clk_unregister() to release priv->clk and returns an error. However, the caller ca8210_probe() then calls ca8210_remove(), where priv->clk is freed again in ca8210_unregister_ext_clock(). In this case, a use-after-free may happen in the second time we call clk_unregister(). Fix this by removing the first clk_unregister(). Also, priv->clk could be an error code on failure of clk_register_fixed_rate(). Use IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Message-ID: <20231007033049.22353-1-dinghao.liu@zju.edu.cn> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2023-10-07Merge tag 'for-6.6/dm-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix memory leak when freeing dm zoned target device - Update dm-devel mailing list address in MAINTAINERS * tag 'for-6.6/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: MAINTAINERS: update the dm-devel mailing list dm zoned: free dmz->ddev array in dmz_put_zoned_devices
2023-10-07Merge tag 'media/v6.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - two Kconfig build fixes under randconfig - pxa_camera: Fix an error handling path - mediatek: vcodec: Fix a NULL-access pointer - tegra-video: fix an infinite recursion regression * tag 'media/v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mediatek: vcodec: Fix encoder access NULL pointer staging: media: tegra-video: fix infinite recursion regression media: pci: intel: ivsc: select V4L2_FWNODE media: ipu-bridge: Fix Kconfig dependencies media: pxa_camera: Fix an error handling path in pxa_camera_probe()
2023-10-07Merge tag 'devicetree-fixes-for-6.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix potential memory leak in of_changeset_action() - Fix some i.MX binding warnings - Fix typo in renesas,vin binding field-even-active property - Fix andestech,ax45mp-cache example unit-address - Add missing additionalProperties on RiscV CPU interrupt-controller node - Add missing unevaluatedProperties on media bindings - Fix brcm,iproc-pcie binding 'msi' child node schema - Fix MEMSIC MXC4005 compatible string * tag 'devicetree-fixes-for-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string dt-bindings: PCI: brcm,iproc-pcie: Fix 'msi' child node schema dt-bindings: PCI: brcm,iproc-pcie: Drop common pci-bus properties dt-bindings: PCI: brcm,iproc-pcie: Fix example indentation media: dt-bindings: Add missing unevaluatedProperties on child node schemas dt-bindings: bus: fsl,imx8qxp-pixel-link-msi-bus: Drop child 'reg' property media: dt-bindings: imx7-csi: Make power-domains not required for imx8mq dt-bindings: media: renesas,vin: Fix field-even-active spelling dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in example of: overlay: Reorder struct fragment fields kerneldoc dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false' dt-bindings: riscv: cpus: Add missing additionalProperties on interrupt-controller node of: dynamic: Fix potential memory leak in of_changeset_action()
2023-10-07Merge tag 'gpio-fixes-for-v6.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Another round of driver one-liners from the GPIO subsystem: - disable pin control on MMP GPIOs in gpio-pxa - fix the GPIO number passed to one of the pinctrl callbacks in gpio-aspeed" * tag 'gpio-fixes-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config() gpio: pxa: disable pinctrl calls for MMP_GPIO
2023-10-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "This includes a fix for a significant security miss in checking the RDMA_NLDEV_CMD_SYS_SET operation. Summary: - UAF in SRP - Error unwind failure in siw connection management - Missing error checks - NULL/ERR_PTR confusion in erdma - Possible string truncation in CMA configfs and mlx4 - Data ordering issue in bnxt_re - Missing stats decrement on object destroy in bnxt_re - Mlx5 bugs in this merge window: * Incorrect access_flag in the new mkey cache * Missing unlock on error in flow steering * lockdep possible deadlock on new mkey cache destruction (Plus a fix for this too) - Don't leak kernel stack memory to userspace in the CM - Missing permission validation for RDMA_NLDEV_CMD_SYS_SET" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/core: Require admin capabilities to set system parameters RDMA/mlx5: Remove not-used cache disable flag RDMA/cma: Initialize ib_sa_multicast structure to 0 when join RDMA/mlx5: Fix mkey cache possible deadlock on cleanup RDMA/mlx5: Fix NULL string error RDMA/mlx5: Fix mutex unlocking on error flow for steering anchor creation RDMA/mlx5: Fix assigning access flags to cache mkeys IB/mlx4: Fix the size of a buffer in add_port_entries() RDMA/bnxt_re: Decrement resource stats correctly RDMA/bnxt_re: Fix the handling of control path response data RDMA/cma: Fix truncation compilation warning in make_cma_ports RDMA/erdma: Fix NULL pointer access in regmr_cmd RDMA/erdma: Fix error code in erdma_create_scatter_mtt() RDMA/uverbs: Fix typo of sizeof argument RDMA/cxgb4: Check skb value for failure to allocate RDMA/siw: Fix connection failure handling RDMA/srp: Do not call scsi_done() from srp_abort()
2023-10-07irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()Geert Uytterhoeven
Use the existing irq_data_get_irq_chip_data() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/8e47cc6400e5a82c854c855948d2665a3a3197e3.1695819391.git.geert+renesas@glider.be
2023-10-07irqchip/stm32-exti: add missing DT IRQ flag translationBen Wolsieffer
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger flags specified in the device tree were being ignored. This was preventing the RTC alarm interrupt from working, because it must be set to trigger on the rising edge to function correctly. Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231003162003.1649967-1-ben.wolsieffer@hefring.com
2023-10-07irqchip/riscv-intc: Mark all INTC nodes as initializedAnup Patel
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we create INTC IRQ domain only for the INTC node belonging to the boot HART. This means only the boot HART INTC node will be marked as initialized and other INTC nodes won't be marked which results downstream interrupt controllers (such as PLIC, IMSIC and APLIC direct-mode) not being probed due to missing device suppliers. To address this issue, we mark all INTC node for which we don't create IRQ domain as initialized. Reported-by: Dmitry Dunaev <dunaev@tecon.ru> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230926102801.1591126-1-dunaev@tecon.ru Link: https://lore.kernel.org/r/20231003044403.1974628-4-apatel@ventanamicro.com
2023-10-07irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probingLorenzo Pieralisi
The GIC architecture specification defines a set of registers for redistributors and ITSes that control the sharebility and cacheability attributes of redistributors/ITSes initiator ports on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER, GITS_BASER<n>). Architecturally the GIC provides a means to drive shareability and cacheability attributes signals and related IWB/OWB/ISH barriers but it is not mandatory for designs to wire up the corresponding interconnect signals that control the cacheability/shareability of transactions. Redistributors and ITSes interconnect ports can be connected to non-coherent interconnects that are not able to manage the shareability/cacheability attributes; this implicitly makes the redistributors and ITSes non-coherent observers. So far, the GIC driver on probe executes a write to "probe" for the redistributors and ITSes registers shareability bitfields by writing a value (ie InnerShareable - the shareability domain the CPUs are in) and check it back to detect whether the value sticks or not; this hinges on a GIC programming model behaviour that predates the current specifications, that just define shareability bits as writeable but do not guarantee that writing certain shareability values enable the expected behaviour for the redistributors/ITSes memory interconnect ports. To enable non-coherent GIC designs, introduce the "dma-noncoherent" device tree property to allow firmware to describe redistributors and ITSes as non-coherent observers on the memory interconnect and use the property to force the shareability attributes to be programmed into the redistributors and ITSes registers through the GIC quirks mechanism. Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231006125929.48591-3-lpieralisi@kernel.org
2023-10-07irqchip/gic-v3-its: Split allocation from initialisation of its_nodeMarc Zyngier
In order to pave the way for more fancy quirk handling without making more of a mess of this terrible driver, split the allocation of the ITS descriptor (its_node) from the actual probing. This will allow firmware-specific hooks to be added between these two points. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231006125929.48591-4-lpieralisi@kernel.org
2023-10-06ravb: Fix use-after-free issue in ravb_tx_timeout_work()Yoshihiro Shimoda
The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Zheng Wang <zyytlz.wz@163.com> Closes: https://lore.kernel.org/netdev/20230725030026.1664873-1-zyytlz.wz@163.com/ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231005011201.14368-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06ravb: Fix up dma_free_coherent() call in ravb_remove()Yoshihiro Shimoda
In ravb_remove(), dma_free_coherent() should be call after unregister_netdev(). Otherwise, this controller is possible to use the freed buffer. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20231005011201.14368-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-26 11:32:20 +0000