| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a few more (PCIE and generic interface related)
cleanups which becomes reasonable after the previous patch.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-2-dmantipov@yandex.ru
|
|
Since 'mwifiex_write_reg()' just issues void 'iowrite32()',
convert the former to 'void' and simplify all related users
(with the only exception of 'read_poll_timeout()' which
explicitly requires a non-void function argument).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919132804.73340-1-dmantipov@yandex.ru
|
|
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing")
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
|
|
Two ACL regions that are configured by the driver during initialization are
the ones used for IPv4 and IPv6 multicast forwarding. Entries residing
in these two regions match on the {SIP, DIP, VRID} key elements.
Currently for IPv6 region, 9 key blocks are used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 4 for DIP - 'ipv4_0', 'ipv6_{0,1,2/2b}'
* 1 for VRID - 'ipv4_4b'
This can be improved by reducing the amount key blocks needed for
the IPv6 region to 8. It is possible to use key blocks that mix subsets of
the VRID element with subsets of the DIP element.
The following key blocks can be used:
* 4 for SIP - 'ipv4_1', 'ipv6_{3,4,5}'
* 1 for subset of DIP - 'ipv4_0'
* 3 for the rest of DIP and subsets of VRID - 'ipv6_{0,1,2/2b}'
To make this happen, add VRID sub-elements as part of existing keys -
'ipv6_{0,1,2/2b}'. Note that one of the sub-elements is called
VRID_ROUTER_MSB and does not contain bit numbers like the rest, as for
Spectrum < 4 this element represents bits 8-10 and for Spectrum-4 it
represents bits 8-11.
Breaking VRID into 3 sub-elements makes the driver use one less block in
IPv6 region for multicast forwarding. The sub-elements can be filled in
blocks that are used for destination IP.
The algorithm in the driver that chooses which key blocks will be used is
lazy and not the optimal one. It searches the block that contains the most
elements that are required, chooses it, removes the elements that appear
in the chosen block and starts again searching the block that contains the
most elements.
When key block 'ipv4_4' is defined, the algorithm might choose it, as it
contains 2 sub-elements of VRID, then 8 blocks must be chosen for SIP and
DIP and we get 9 blocks to match on {SIP, DIP, VRID}. That is why we had to
remove key block 'ipv4_4' in a previous patch and use key block that
contains one field for VRID.
This improvement was tested and indeed 8 blocks are used instead of 9.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous patch replaced the key block 'ipv4_4' with 'ipv4_5'. The
corresponding block for Spectrum-4 is 'ipv4_4b'. To be consistent, replace
key block 'ipv4_4b' with 'ipv4_5b'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently virtual router ID element is broken to two sub-elements -
'VIRT_ROUTER_LSB' and 'VIRT_ROUTER_MSB'. It was broken as this field is
broken in 'ipv4_4' flex key which is used for IPv4 in Spectrum < 4.
For Spectrum-4, we use 'ipv4_4b' flex key which contains one field for
virtual router, this key is not supported in older ASICs.
Add 'ipv4_5' flex key which is supported in all ASICs and contains one
field for virtual router. Then there is no reason to use 'VIRT_ROUTER_LSB'
and 'VIRT_ROUTER_MSB', remove them and add one element 'VIRT_ROUTER' for
this field.
The motivation is to get rid of 'ipv4_4' flex key, as it might be chosen
for IPv6 multicast forwarding region. This will not allow the improvement
in a following patch. See more details in the cover letter and in a
following patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in uhdlc_close()
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Kconfig help text for baycom drivers suggests that more information
on the hardware can be found at <https://www.baycom.de>. The website now
includes no information on their ham radio products other than a mention
that they were once produced by the company, saying:
"The amateur radio equipment is now no longer part and business of BayCom GmbH"
As there is no information relavent to the baycom driver on the site,
remove the link.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.6-2023-09-20:
amdgpu:
- MST fix
- Vbios part number reporting fix
- Fix a possible memory leak in an error case in the RAS code
- Fix low resolution modes on eDP
amdkfd:
- Fix GPU address for user queue wptr when GART is not at 0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920222915.7789-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Prevent error pointer dereference (Dan Carpenter)
- Fix PMU busyness values when using GuC mode (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZQxf267jxc7tiIlZ@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* DRM MM-test fixes
* Fbdev Kconfig fixes
* ivpu:
* IRQ-handling fixes
* meson:
* Fix memory leak in HDMI EDID code
* nouveau:
* Correct type casting
* Fix memory leak in scheduler
* u_memcpya() fixes
* virtio:
* Fence cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921153712.GA14059@linux-uq9g
|
|
Some old drives (e.g. an Ultra320 SCSI disk as reported by John) do not
seem to execute MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES
commands correctly and hang when a non-zero service action is specified
(one command format with service action case in scsi_report_opcode()).
Currently, CDL probing with scsi_cdl_check_cmd() is the only caller using a
non zero service action for scsi_report_opcode(). To avoid issues with
these old drives, do not attempt CDL probe if the device reports support
for an SPC version lower than 5 (CDL was introduced in SPC-5). To keep
things working with ATA devices which probe for the CDL T2A and T2B pages
introduced with SPC-6, modify ata_scsiop_inq_std() to claim SPC-6 version
compatibility for ATA drives supporting CDL.
SPC-6 standard version number is defined as Dh (= 13) in SPC-6 r09. Fix
scsi_probe_lun() to correctly capture this value by changing the bit mask
for the second byte of the INQUIRY response from 0x7 to 0xf.
include/scsi/scsi.h is modified to add the definition SCSI_SPC_6 with the
value 14 (Dh + 1). The missing definitions for the SCSI_SPC_4 and
SCSI_SPC_5 versions are also added.
Reported-by: John David Anglin <dave.anglin@bell.net>
Fixes: 624885209f31 ("scsi: core: Detect support for command duration limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230915022034.678121-1-dlemoal@kernel.org
Tested-by: David Gow <david@davidgow.net>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- remove some unused functions in the Xen event channel handling
- fix a regression (introduced during the merge window) when booting as
Xen PV guest
- small cleanup removing another strncpy() instance
* tag 'for-linus-6.6a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/efi: refactor deprecated strncpy
x86/xen: allow nesting of same lazy mode
x86/xen: move paravirt lazy code
arm/xen: remove lazy mode related definitions
xen: simplify evtchn_do_upcall() call maze
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"One patch to drop a non-existent alarm attribute in the nct6775 driver"
* tag 'hwmon-for-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix non-existent ALARM warning
|
|
Don't populate read-only const arrays on the stack, instead make them
static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230919093606.24446-1-colin.i.king@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
./drivers/dpll/dpll_netlink.c:847:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6605
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309190540.RFwfIgO7-lkp@intel.com/
Link: https://lore.kernel.org/r/20230919010305.120991-1-yang.lee@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rc_qp_count and ud_qp_count is not decremented during qp destroy.
Fix this.
Fixes: cb95709e0dca ("bnxt_re: Update the hw counters for resource stats")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1695199280-13520-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Flag that indicate control path command completion should be cleared
only after copying the command response data. As soon as the is_in_used
flag is clear, the waiting thread can proceed with wrong response
data. This wrong data is causing multiple issues like wrong lkey
used in data traffic and wrong AH Id etc.
Use a memory barrier to ensure that the response data
is copied and visible to the process waiting on a different
cpu core before clearing the is_in_used flag.
Clear the is_in_used after copying the command response.
Fixes: bcfee4ce3e01 ("RDMA/bnxt_re: remove redundant cmdq_bitmap")
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1695199280-13520-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In i2c_mux_gpio_probe_fw(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.
Fixes: 98b2b712bc85 ("i2c: i2c-mux-gpio: Enable this driver in ACPI land")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Several places in TC offload code assumed that the return from
rhashtable_lookup_get_insert_fast() was always either NULL or a valid
pointer to an existing entry, but in fact that function can return an
error pointer. In that case, perform the usual cleanup of the newly
created entry, then pass up the error, rather than attempting to take a
reference on the old entry.
Fixes: d902e1a737d4 ("sfc: bare bones TC offload on EF100")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230919183949.59392-1-edward.cree@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
|
|
Remove set but otherwise unused 'wlan_init_status' and
'wmi_ready' members of 'struct ath11k_base', adjust
'ath11k_wmi_tlv_rdy_parse()' accordingly.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230824075121.121144-2-dmantipov@yandex.ru
|
|
In 'ath11k_dp_rx_mon_dest_process()', 'mon_dst_srng' points to
a member of 'srng_list', which is a fixed-size array inside
'struct ath11k_hal'. This way, if 'ring_id' is valid (i. e.
between 0 and HAL_SRNG_RING_ID_MAX - 1 inclusive), 'mon_dst_srng'
can't be NULL and so relevant check may be dropped.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230824075121.121144-1-dmantipov@yandex.ru
|
|
Since 'user_stats' is a fixed-size array of 'struct htt_ppdu_user_stats'
in 'struct htt_ppdu_stats', any of its member can't be NULL and so
relevant check may be dropped.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906093704.14001-1-dmantipov@yandex.ru
|
|
Commit 5b32b6dd96633 ("ath11k: Remove core PCI references from
PCI common code") breaks with one MSI vector because it moves
affinity setting after IRQ request, see below log:
[ 1417.278835] ath11k_pci 0000:02:00.0: failed to receive control response completion, polling..
[ 1418.302829] ath11k_pci 0000:02:00.0: Service connect timeout
[ 1418.302833] ath11k_pci 0000:02:00.0: failed to connect to HTT: -110
[ 1418.303669] ath11k_pci 0000:02:00.0: failed to start core: -110
The detail is, if do affinity request after IRQ activated,
which is done in request_irq(), kernel caches that request and
returns success directly. Later when a subsequent MHI interrupt is
fired, kernel will do the real affinity setting work, as a result,
changs the MSI vector. However at that time host has configured
old vector to hardware, so host never receives CE or DP interrupts.
Fix it by setting affinity before registering MHI controller
where host is, for the first time, doing IRQ request.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1
Fixes: 5b32b6dd9663 ("ath11k: Remove core PCI references from PCI common code")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230907015606.16297-1-quic_bqiang@quicinc.com
|
|
When users attempt to obtain the coalesce setting using the
ethtool command, current code always returns 0 for tx-usecs.
This is because I225/6 always uses a queue pair setting, hence
tx_coalesce_usecs does not return a value during the
igc_ethtool_get_coalesce() callback process. The pair queue
condition checking in igc_ethtool_get_coalesce() is removed by
this patch so that the user gets information of the value of tx-usecs.
Even if i225/6 is using queue pair setting, there is no harm in
notifying the user of the tx-usecs. The implementation of the current
code may have previously been a copy of the legacy code i210.
Since I225 has the queue pair setting enabled, tx-usecs will always adhere
to the user-set rx-usecs value. An error message will appear when the user
attempts to set the tx-usecs value for the input parameters because,
by default, they should only set the rx-usecs value.
This patch also adds the helper function to get the
previous rx coalesce value similar to tx coalesce.
How to test:
User can get the coalesce value using ethtool command.
Example command:
Get: ethtool -c <interface>
Previous output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 0
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
New output:
rx-usecs: 3
rx-frames: n/a
rx-usecs-irq: n/a
rx-frames-irq: n/a
tx-usecs: 3
tx-frames: n/a
tx-usecs-irq: n/a
tx-frames-irq: n/a
Fixes: 8c5ad0dae93c ("igc: Add ethtool support")
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230919170331.1581031-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to Jeff, 'HTT_DATA_TX_STATUS_DOWNLOAD_FAIL' from
'enum htt_data_tx_status' is never actually used by the
firmware code and so may be dropped, with the related
adjustment to 'ath10k_htt_rx_tx_compl_ind()'.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230914160744.155903-1-dmantipov@yandex.ru
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ath10k_ce_ring.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Jeff Johnson <quic_jjohnson@quicinc.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230915200636.never.762-kees@kernel.org
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct wcn36xx_hal_ind_msg.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: wcn36xx@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230915200622.never.820-kees@kernel.org
|
|
No need cast (void*) to (struct hal_rx_ppdu_end_user_stats *),
(struct ath12k_rx_desc_info *) or (struct hal_tx_msdu_ext_desc *).
Change the prototype to remove the local variable.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045142.524226-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct htt_rx_ring_setup_ring32 *),
(struct htt_rx_ring_setup_ring64 *). Change the prototype to
remove the local variable.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045056.523958-1-yunchuan@nfschina.com
|
|
No need cast (void *) to (struct ath6kl *) or
(struct ath6kl_cookie *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045008.523730-1-yunchuan@nfschina.com
|
|
No need cast (void *) to (struct ath5k_hw *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919044959.523576-1-yunchuan@nfschina.com
|
|
No need cast (void *) to other types such as (struct wcn36xx *),
(struct wcn36xx_hal_update_scan_params_resp *), etc.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919044925.523403-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct ar5523_cmd_hdr *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919044906.523189-1-yunchuan@nfschina.com
|
|
In ath9k_hif_usb_resume, the error handling code calls
ath9k_hif_usb_dealloc_urbs twice in different paths.
To unify the error handling code, we move the else branch before
the if branch and drop one level of indentation of the if branch.
In addition, move the ret variable at the end of variable declarations
to be reverse x-mas tree order.
Note that this patch does not incur any functionability change.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905013556.2595854-1-dzm91@hust.edu.cn
|
|
In ath12k_dp_tx(), if we reach fail_dma_unmap due to some errors,
current code does DMA unmap unconditionally on skb_cb->paddr_ext_desc.
However, skb_cb->paddr_ext_desc may be NULL and thus we get below
warning:
kernel: [ 8887.076212] WARNING: CPU: 3 PID: 0 at drivers/iommu/dma-iommu.c:1077 iommu_dma_unmap_page+0x79/0x90
Fix it by checking skb_cb->paddr_ext_desc before unmap it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230830021131.5610-1-quic_bqiang@quicinc.com
|
|
reg_cap.phy_id is extracted from WMI event and could be an unexpected value
in case some errors happen. As a result out-of-bound write may occur to
soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it.
This is found during code review.
Compile tested only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230830020716.5420-1-quic_bqiang@quicinc.com
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
if XDP-redirect has been performed.
Invoke xdp_do_flush() before leaving NAPI.
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Fixes: 06059a1a9a4a5 ("octeontx2-pf: Add XDP support to netdev PF")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xdp_do_flush() should be invoked before leaving the NAPI poll function
after a XDP-redirect. This is not the case if the driver leaves via
the error path (after having a redirect in one of its previous
iterations).
Invoke xdp_do_flush() also in the error path.
Cc: Arthur Kiyanovski <akiyano@amazon.com>
Cc: David Arinzon <darinzon@amazon.com>
Cc: Noam Dagan <ndagan@amazon.com>
Cc: Saeed Bishara <saeedb@amazon.com>
Cc: Shay Agroskin <shayagr@amazon.com>
Fixes: a318c70ad152b ("net: ena: introduce XDP redirect implementation")
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct libipw_txb.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230915200602.never.582-kees@kernel.org
|
|
Add an algorithm to backoff the Tx Task when low memory scenario is
triggered at firmware. During high data transfer from host, the firmware
runs out of VMM memory, which is used to hold the frames from the host.
So, adding the flow control delays the transmit from host side when
there is not enough space to accommodate frames in firmware side.
Signed-off-by: Prasurjya Rohan Saikia <prasurjya.rohansaikia@microchip.com>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230915175946.4361-1-prasurjya.rohansaikia@microchip.com
|
|
The mwifiex_pcie driver is missing the MODULE_FIRMWARE macro to
add the firmware files needed to the module metadata.
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230914211938.28395-1-victor.gonzalo@anddroptable.net
|
|
Drop filled with NULL pointers but otherwise unused 'skb_arr'
array of 'struct mwifiex_sdio_mpa_rx', adjust related code.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230821115254.167552-1-dmantipov@yandex.ru
|
|
Directly use tbo's start address will miss the domain start offset. Need
to use gpu_offset instead.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
