summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-09-19net: ethernet: mtk_wed: refactor mtk_wed_check_wfdma_rx_fill routineLorenzo Bianconi
Refactor mtk_wed_check_wfdma_rx_fill() in order to be reused adding HW receive offload support for MT7988 SoC. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: introduce WED support for MT7988Sujuan Chen
Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: add mtk_wed_soc_data structureLorenzo Bianconi
Introduce mtk_wed_soc_data utility structure to contain per-SoC definitions. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: fix EXT_INT_STATUS_RX_FBUF definitions for MT7986 SoCLorenzo Bianconi
Fix MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH and MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH definitions for MT7986 (MT7986 is the only SoC to use them). Fixes: de84a090d99a ("net: ethernet: mtk_eth_wed: add wed support for mt7986 chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: make memory region optionalLorenzo Bianconi
Make mtk_wed_wo_memory_region optionals. This is a preliminary patch to introduce Wireless Ethernet Dispatcher support for MT7988 SoC since MT7988 WED fw image will have a different layout. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: move mem_region array out of mtk_wed_mcu_load_firmwareLorenzo Bianconi
Remove mtk_wed_wo_memory_region boot structure in mtk_wed_wo. This is a preliminary patch to introduce WED support for MT7988 SoC. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: introduce mtk_wed_buf structureLorenzo Bianconi
Introduce mtk_wed_buf structure to store both virtual and physical addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a preliminary patch to add WED support for MT7988 SoC since it relies on a different dma descriptor layout not storing page dma addresses. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_descLorenzo Bianconi
Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used even on tx side by MT7988 SoC. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: do not configure rx offload if not supportedLorenzo Bianconi
Check if rx offload is supported running mtk_wed_get_rx_capa routine before configuring it. This is a preliminary patch to introduce Wireless Ethernet Dispatcher (WED) support for MT7988 SoC. Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: ethernet: mtk_wed: introduce versioning utility routinesLorenzo Bianconi
Similar to mtk_eth_soc, introduce the following wed versioning utility routines: - mtk_wed_is_v1 - mtk_wed_is_v2 This is a preliminary patch to introduce WED support for MT7988 SoC Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19efi/unaccepted: Make sure unaccepted table is mappedKirill A. Shutemov
Unaccepted table is now allocated from EFI_ACPI_RECLAIM_MEMORY. It translates into E820_TYPE_ACPI, which is not added to memblock and therefore not mapped in the direct mapping. This causes a crash on the first touch of the table. Use memblock_add() to make sure that the table is mapped in direct mapping. Align the range to the nearest page borders. Ranges smaller than page size are not mapped. Fixes: e7761d827e99 ("efi/unaccepted: Use ACPI reclaim memory for unaccepted memory table") Reported-by: Hongyu Ning <hongyu.ning@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-09-19net: phy: fix regression with AX88772A PHY driverRussell King (Oracle)
Marek reports that a deadlock occurs with the AX88772A PHY used on the ASIX USB network driver: asix 1-1.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:003:10] driver [Asix Electronics AX88772A] (irq=POLL) Asix Electronics AX88772A usb-001:003:10: attached PHY driver(mii_bus:phy_addr=usb-001:003:10, irq=POLL) asix 1-1.4:1.0 eth0: register 'asix' at usb-12110000.usb-1.4, ASIX AX88772 USB 2.0 Ethernet, a2:99:b6:cd:11:eb asix 1-1.4:1.0 eth0: configuring for phy/internal link mode ============================================ WARNING: possible recursive locking detected 6.6.0-rc1-00239-g8da77df649c4-dirty #13949 Not tainted -------------------------------------------- kworker/3:3/71 is trying to acquire lock: c6c704cc (&dev->lock){+.+.}-{3:3}, at: phy_start_aneg+0x1c/0x38 but task is already holding lock: c6c704cc (&dev->lock){+.+.}-{3:3}, at: phy_state_machine+0x100/0x2b8 This is because we now consistently call phy_process_state_change() while holding phydev->lock, but the AX88772A PHY driver then goes on to call phy_start_aneg() which tries to grab the same lock - causing deadlock. Fix this by exporting the unlocked version, and use this in the PHY driver instead. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: ef113a60d0a9 ("net: phy: call phy_error_precise() while holding the lock") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/E1qiEFs-007g7b-Lq@rmk-PC.armlinux.org.uk Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: dsa: microchip: Fix spelling mistake "unxpexted" -> "unexpected"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20230918132142.199638-1-colin.i.king@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19team: fix null-ptr-deref when team device type is changedZiyang Xuan
Get a null-ptr-deref bug as follows with reproducer [1]. BUG: kernel NULL pointer dereference, address: 0000000000000228 ... RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q] ... Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x150 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x26/0x30 ? vlan_dev_hard_header+0x35/0x140 [8021q] ? vlan_dev_hard_header+0x8e/0x140 [8021q] neigh_connected_output+0xb2/0x100 ip6_finish_output2+0x1cb/0x520 ? nf_hook_slow+0x43/0xc0 ? ip6_mtu+0x46/0x80 ip6_finish_output+0x2a/0xb0 mld_sendpack+0x18f/0x250 mld_ifc_work+0x39/0x160 process_one_work+0x1e6/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [1] $ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}' $ ip link add name t-dummy type dummy $ ip link add link t-dummy name t-dummy.100 type vlan id 100 $ ip link add name t-nlmon type nlmon $ ip link set t-nlmon master team0 $ ip link set t-nlmon nomaster $ ip link set t-dummy up $ ip link set team0 up $ ip link set t-dummy.100 down $ ip link set t-dummy.100 master team0 When enslave a vlan device to team device and team device type is changed from non-ether to ether, header_ops of team device is changed to vlan_header_ops. That is incorrect and will trigger null-ptr-deref for vlan->real_dev in vlan_dev_hard_header() because team device is not a vlan device. Cache eth_header_ops in team_setup(), then assign cached header_ops to header_ops of team net device when its type is changed from non-ether to ether to fix the bug. Fixes: 1d76efe1577b ("team: add support for non-ethernet devices") Suggested-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19leds: Drop BUG_ON check for LED_COLOR_ID_MULTIMarek Behún
Commit c3f853184bed ("leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false") fixed a no-op BUG_ON. This turned out to cause a regression, since some in-tree device-tree files already use LED_COLOR_ID_MULTI. Drop the BUG_ON altogether. Fixes: c3f853184bed ("leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false") Reported-by: Da Xue <da@libre.computer> Closes: https://lore.kernel.org/linux-leds/ZQLelWcNjjp2xndY@duo.ucw.cz/T/ Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918140724.18634-1-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-09-19mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQWoody Zhang
MFD_CS42L43 depends on REGMAP_IRQ as it uses devm_regmap_add_irq_chip. Otherwise the build may fail with following log. AR drivers/built-in.a AR built-in.a AR vmlinux.a LD vmlinux.o OBJCOPY modules.builtin.modinfo GEN modules.builtin MODPOST Module.symvers ERROR: modpost: "devm_regmap_add_irq_chip" [drivers/mfd/cs42l43.ko] undefined! Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver") Signed-off-by: Woody Zhang <woodylab@foxmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/tencent_E54C7156F583E15FFE320E576E3389C39A08@qq.com Signed-off-by: Lee Jones <lee@kernel.org>
2023-09-19spi: Merge up old fixMark Brown
This fix was originally queued at the end of the 6.4 cycle but as it was minor it never actually got sent.
2023-09-19firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()Christophe JAILLET
If mbox_request_channel_byname() fails, the memory allocated a few lines above still need to be freed before going to the error handling path. Fixes: 046326989a18 ("firmware: imx: Save channel name for further use") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-19power: supply: core: fix use after free in ueventSebastian Reichel
power_supply_uevent() which is called to emit a udev event on device deletion attempts to use the power_supply_battery_info structure, which is device-managed and has been freed before this point. Fix this by not generating all battery/charger properties when the device is about to be removed. This also avoids generating errors when trying to access the hardware in hot-unplug scenarios. ================================================================== BUG: KASAN: slab-use-after-free in power_supply_battery_info_has_prop (power_supply_core.c:872) Read of size 4 at addr 0000000062e59028 by task python3/27 Call Trace: power_supply_battery_info_has_prop (power_supply_core.c:872) power_supply_uevent (power_supply_sysfs.c:504) dev_uevent (drivers/base/core.c:2590) kobject_uevent_env (lib/kobject_uevent.c:558) kobject_uevent (lib/kobject_uevent.c:643) device_del (drivers/base/core.c:3266 drivers/base/core.c:3831) device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854) power_supply_unregister (power_supply_core.c:1608) devm_power_supply_release (power_supply_core.c:1515) release_nodes (drivers/base/devres.c:506) devres_release_group (drivers/base/devres.c:669) i2c_device_remove (drivers/i2c/i2c-core-base.c:629) device_remove (drivers/base/dd.c:570) device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295) device_driver_detach (drivers/base/dd.c:1332) unbind_store (drivers/base/bus.c:247) ... Allocated by task 27: devm_kmalloc (drivers/base/devres.c:119 drivers/base/devres.c:829) power_supply_get_battery_info (include/linux/device.h:316 power_supply_core.c:626) __power_supply_register (power_supply_core.c:1408) devm_power_supply_register (power_supply_core.c:1544) bq256xx_probe (bq256xx_charger.c:1539 bq256xx_charger.c:1727) bq256xx_charger i2c_device_probe (drivers/i2c/i2c-core-base.c:584) really_probe (drivers/base/dd.c:579 drivers/base/dd.c:658) __driver_probe_device (drivers/base/dd.c:800) device_driver_attach (drivers/base/dd.c:1128) bind_store (drivers/base/bus.c:273) ... Freed by task 27: kfree (mm/slab_common.c:1073) release_nodes (drivers/base/devres.c:503) devres_release_all (drivers/base/devres.c:536) device_del (drivers/base/core.c:3829) device_unregister (drivers/base/core.c:3730 drivers/base/core.c:3854) power_supply_unregister (power_supply_core.c:1608) devm_power_supply_release (power_supply_core.c:1515) release_nodes (drivers/base/devres.c:506) devres_release_group (drivers/base/devres.c:669) i2c_device_remove (drivers/i2c/i2c-core-base.c:629) device_remove (drivers/base/dd.c:570) device_release_driver_internal (drivers/base/dd.c:1274 drivers/base/dd.c:1295) device_driver_detach (drivers/base/dd.c:1332) unbind_store (drivers/base/bus.c:247) ... ================================================================== Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Fixes: 27a2195efa8d ("power: supply: core: auto-exposure of simple-battery data") Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-19net: hns3: add 5ms delay before clear firmware reset irq sourceJie Wang
Currently the reset process in hns3 and firmware watchdog init process is asynchronous. we think firmware watchdog initialization is completed before hns3 clear the firmware interrupt source. However, firmware initialization may not complete early. so we add delay before hns3 clear firmware interrupt source and 5 ms delay is enough to avoid second firmware reset interrupt. Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: fix fail to delete tc flower rules during reset issueJijie Shao
Firmware does not respond driver commands during reset Therefore, rule will fail to delete while the firmware is resetting So, if failed to delete rule, set rule state to TO_DEL, and the rule will be deleted when periodic task being scheduled. Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: only enable unicast promisc when mac table fullJian Shen
Currently, the driver will enable unicast promisc for the function once configure mac address fail. It's unreasonable when the failure is caused by using same mac address with other functions. So only enable unicast promisc when mac table full. Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: fix GRE checksum offload issueJie Wang
The device_version V3 hardware can't offload the checksum for IP in GRE packets, but can do it for NvGRE. So default to disable the checksum and GSO offload for GRE, but keep the ability to enable it when only using NvGRE. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19net: hns3: add cmdq check for vf periodic service taskJie Wang
When the vf cmdq is disabled, there is no need to keep these task running. So this patch skip these task when the cmdq is disabled. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19octeon_ep: restructured interrupt handlersShinas Rasheed
Separated queue specific interrupts to register to individual msix-vectors instead of using a single generic interrupt handler on a single msix-vector. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://lore.kernel.org/r/20230918065621.2165449-1-srasheed@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19i2c: i801: unregister tco_pdev in i801_probe() error pathHeiner Kallweit
We have to unregister tco_pdev also if i2c_add_adapter() fails. Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-19net: stmmac: fix incorrect rxq|txq_stats referenceJisheng Zhang
commit 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") caused one regression as found by Uwe, the backtrace looks like: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21 Hardware name: STM32 (Device Tree Support) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x60/0x90 dump_stack_lvl from register_lock_class+0x98c/0x99c register_lock_class from __lock_acquire+0x74/0x293c __lock_acquire from lock_acquire+0x134/0x398 lock_acquire from stmmac_get_stats64+0x2ac/0x2fc stmmac_get_stats64 from dev_get_stats+0x44/0x130 dev_get_stats from rtnl_fill_stats+0x38/0x120 rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4 rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144 rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88 rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec __dev_notify_flags from dev_change_flags+0x50/0x5c dev_change_flags from ip_auto_config+0x2f4/0x1260 ip_auto_config from do_one_initcall+0x70/0x35c do_one_initcall from kernel_init_freeable+0x2ac/0x308 kernel_init_freeable from kernel_init+0x1c/0x138 kernel_init from ret_from_fork+0x14/0x2c The reason is the rxq|txq_stats structures are not what expected because stmmac_open() -> __stmmac_open() the structure is overwritten by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));" This causes the well initialized syncp member of rxq|txq_stats is overwritten unexpectedly as pointed out by Johannes and Uwe. Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats as ____cacheline_aligned_in_smp. Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-19media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() callChristophe JAILLET
The commit in Fixes has removed an fwnode_graph_get_endpoint_by_id() call in mipi_csis_subdev_init(). So the reference that was taken should not be released anymore in the error handling path of the probe and in the remove function. Remove the now incorrect fwnode_handle_put() calls. Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-19xen: simplify evtchn_do_upcall() call mazeJuergen Gross
There are several functions involved for performing the functionality of evtchn_do_upcall(): - __xen_evtchn_do_upcall() doing the real work - xen_hvm_evtchn_do_upcall() just being a wrapper for __xen_evtchn_do_upcall(), exposed for external callers - xen_evtchn_do_upcall() calling __xen_evtchn_do_upcall(), too, but without any user Simplify this maze by: - removing the unused xen_evtchn_do_upcall() - removing xen_hvm_evtchn_do_upcall() as the only left caller of __xen_evtchn_do_upcall(), while renaming __xen_evtchn_do_upcall() to xen_evtchn_do_upcall() Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2023-09-18vfio/pds: Use proper PF device access helperShixiong Ou
The pci_physfn() helper exists to support cases where the physfn field may not be compiled into the pci_dev structure. We've declared this driver dependent on PCI_IOV to avoid this problem, but regardless we should follow the precedent not to access this field directly. Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230914021332.1929155-1-oushixiong@kylinos.cn Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-09-18vfio/pds: Add missing PCI_IOV dependsShixiong Ou
If PCI_ATS isn't set, then pdev->physfn is not defined. it causes a compilation issue: ../drivers/vfio/pci/pds/vfio_dev.c:165:30: error: ‘struct pci_dev’ has no member named ‘physfn’; did you mean ‘is_physfn’? 165 | __func__, pci_dev_id(pdev->physfn), pci_id, vf_id, | ^~~~~~ So adding PCI_IOV depends to select PCI_ATS. Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230906014942.1658769-1-oushixiong@kylinos.cn Fixes: 63f77a7161a2 ("vfio/pds: register with the pds_core PF") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-09-18hwmon: (nct6775) Fix non-existent ALARM warningAhmad Khalifa
Skip non-existent ALARM attribute to avoid a shift-out-of-bounds dmesg warning. Reported-by: Doug Smythies <dsmythies@telus.net> Closes: https://lore.kernel.org/linux-hwmon/ZQVzdlHgWdFhOVyQ@debian.me/T/#mc69b690660eb50734a6b07506d74a119e0266f1b Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799") Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws> Link: https://lore.kernel.org/r/20230918184722.2033225-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-09-18ice: check netlist before enabling ICE_F_GNSSJacob Keller
Similar to the change made for ICE_F_SMA_CTRL, check the netlist before enabling support for ICE_F_GNSS. This ensures that the driver only enables the GNSS feature on devices which actually have the feature enabled in the firmware device configuration. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: introduce ice_pf_src_tmr_ownedJacob Keller
Add ice_pf_src_tmr_owned() macro to check the function capability bit indicating if the current function owns the PTP hardware clock. This is slightly shorter than the more verbose access via hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather than open coding its equivalent. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: fix pin assignment for E810-T without SMA controlJacob Keller
Since commit 43c4958a3ddb ("ice: Merge pin initialization of E810 and E810T adapters"), the ice_ptp_setup_pins_e810() function has been used for both E810 and E810-T devices. The new implementation only distinguishes between whether the device has SMA control or not. It was assumed this is always true for E810-T devices. In addition, it does not set the n_per_out value appropriately when SMA control is enabled. In some cases, the E810-T device may not have access to SMA control. In that case, the E810-T device actually has access to fewer pins than a standard E810 device. Fix the implementation to correctly assign the appropriate pin counts for E810-T devices both with and without SMA control. The mentioned commit already includes the appropriate macro values for these pin counts but they were unused. Instead of assigning the default E810 values and then overwriting them, handle the cases separately in order of E810-T with SMA, E810-T without SMA, and then standard E810. This flow makes following the logic easier. Fixes: 43c4958a3ddb ("ice: Merge pin initialization of E810 and E810T adapters") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: remove ICE_F_PTP_EXTTS feature flagJacob Keller
The ICE_F_PTP_EXTTS feature flag is ostensibly intended to support checking whether the device supports external timestamp pins. It is only checked in E810-specific code flows, and is enabled for all E810-based devices. E822 and E823 flows unconditionally enable external timestamp support. This makes the feature flag meaningless, as it is always enabled. Just unconditionally enable support for external timestamp pins and remove this unnecessary flag. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: PTP: move quad value check inside ice_fill_phy_msg_e822Karol Kolacinski
The callers of ice_fill_phy_msg_e822 check for whether the quad number is within the expected range. Move this check inside the ice_fill_phy_msg_e822 function instead of duplicating it twice. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: PTP: Rename macros used for PHY/QUAD port definitionsKarol Kolacinski
The ice_fill_phy_msg_e822 function uses several macros to specify the correct address when sending a sideband message to the PHY block in hardware. The names of these macros are fairly generic and confusing. Future development is going to extend the driver to support new hardware families which have different relationships between PHY and QUAD. Rename the macros for clarity and to indicate that they are E822 specific. This also matches closer to the hardware specification in the data sheet. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: PTP: Clean up timestamp registers correctlyKarol Kolacinski
E822 PHY TS registers should not be written and the only way to clean up them is to reset QUAD memory. To ensure that the status bit for the timestamp index is cleared, ensure that ice_clear_phy_tstamp implementations first read the timestamp out. Implementations which can write the register continue to do so. Add a note to indicate this function should only be called on timestamps which have their valid bit set. Update the dynamic debug messages to reflect the actual action taken. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: introduce hw->phy_model for handling PTP PHY differencesJacob Keller
The ice driver has PTP support which works across a couple of different device families. The device families each have different PHY hardware which have unique requirements for programming. Today, there is E810-based hardware, and E822-based hardware. To handle this, the driver checks the ice_is_e810() function to separate between the two existing families of hardware. Future development is going to add new hardware designs which have further unique requirements. To make this easier, introduce a phy_model field to the HW structure. This field represents what PHY model the current device has, and is used to allow distinguishing which logic a particular device needs. This will make supporting future upcoming hardware easier, by providing an obvious place to initialize the PHY model, and by already using switch/case statements instead of the previous if statements. Astute reviewers may notice that there are a handful of remaining checks for ice_is_e810() left in ice_ptp.c These conflict with some other cleanup patches in development, and will be fixed in the near future. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: Support cross-timestamping for E823 devicesJacob Keller
The E822 hardware has cross timestamping support using a device feature termed "Hammock Harbor" by the data sheet. This device feature is similar to PCIe PTM, and captures the Always Running Timer (ART) simultaneously with the PTP hardware clock time. This functionality also exists on E823 devices, but is not currently enabled. Rename the cross-timestamp functions to use the _e82x postfix, indicating that the support works across the E82x family of devices and not just the E822 hardware. The flow for capturing a cross-timestamp requires an additional step on E823 devices. The GLTSYN_CMD register must be programmed with the READ_TIME command. Otherwise, the cross timestamp will always report a value of zero for the PTP hardware clock time. To fix this, call ice_ptp_src_cmd() prior to initiating the cross timestamp logic. Once the cross timestamp has completed, call ice_ptp_src_cmd() with ICE_PTP_OP to ensure that the timer command registers are cleared. Co-developed-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: retry acquiring hardware semaphore during cross-timestamp requestKarol Kolacinski
The hardware for performing a cross-timestamp on E822 uses a hardware semaphore which we must acquire before initiating the cross-timestamp operation. The current implementation only attempts to acquire the semaphore once, and assumes that it will succeed. If the semaphore is busy for any reason, the cross-timestamp operation fails with -EFAULT. Instead of immediately failing, try the acquire the lock a few times with a small sleep between attempts. This ensures that most requests will go through without issue. Additionally, return -EBUSY instead of -EFAULT if the operation can't continue due to the semaphore being busy. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: prefix clock timer command enumeration values with ICE_PTPSergey Temerkhanov
The ice driver has an enumeration for the various commands that can be programmed to the MAC and PHY for setting up hardware clock operations. Prefix these with ICE_PTP so that they are clearly namespaced to the ice driver. Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18HID: holtek: fix slab-out-of-bounds Write in holtek_kbd_input_eventMa Ke
There is a slab-out-of-bounds Write bug in hid-holtek-kbd driver. The problem is the driver assumes the device must have an input but some malicious devices violate this assumption. Fix this by checking hid_device's input is non-empty before its usage. Signed-off-by: Ma Ke <make_ruc2021@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-09-18HID: nvidia-shield: add LEDS_CLASS dependencyRandy Dunlap
The hid-nvidia-shield driver uses functions that are built only when LEDS_CLASS is set, so make the driver depend on that symbol to prevent build errors. riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L11': hid-nvidia-shield.c:(.text+0x192): undefined reference to `led_classdev_unregister' riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L113': hid-nvidia-shield.c:(.text+0xfa4): undefined reference to `led_classdev_register_ext' Fixes: 09308562d4af ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rahul Rameshbabu <rrameshbabu@nvidia.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-09-18HID: logitech-hidpp: Add Bluetooth ID for the Logitech M720 Triathlon mouseHans de Goede
Using hidpp for the M720 adds battery info reporting and hires scrolling support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-09-18HID: steelseries: Fix signedness bug in ↵Dan Carpenter
steelseries_headset_arctis_1_fetch_battery() The hid_hw_raw_request() function returns negative error codes or the number bytes transferred.  The problem is that when it returns negative error codes and we check if "ret < sizeof(arctis_1_battery_request)", then the negative values are type promoted from int to high unsigned long values and treated as success. This was detected using Smatch: drivers/hid/hid-steelseries.c:393 steelseries_headset_arctis_1_fetch_battery() warn: error code type promoted to positive: 'ret' Fixes: a0c76896c3fb ("HID: steelseries: Add support for Arctis 1 XBox") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-09-18wifi: wlcore: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. wlcore_remove() returned zero unconditionally. With that converted to return void instead, the wl12xx and wl18xx driver can be converted to .remove_new trivially. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230912171249.755901-1-u.kleine-koenig@pengutronix.de
2023-09-18wifi: rtl8xxxu: Add a description about the device ID 0x7392:0xb722Zenm Chen
According to the driver provided by EDIMAX, the device ID 0x7392:0xb722 belongs to EDIMAX EW-7722UTn V3, so add a comment about this. Signed-off-by: Zenm Chen <zenmchen@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230912053614.10644-1-zenmchen@gmail.com
2023-09-18wifi: rtw89: add mac_gen pointer to access mac port registersPing-Ke Shih
Using mac_gen pointer to reuse the code with WiFi 7 chips, and define MAC ports registers for WiFi 7 chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230911082049.33541-7-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-29 21:01:16 +0000