summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-09-14cxl/mbox: Fix CEL logic for poison and security commandsIra Weiny
The following debug output was observed while testing CXL cxl_core:cxl_walk_cel:721: cxl_mock_mem cxl_mem.0: Opcode 0x4300 unsupported by driver opcode 0x4300 (Get Poison) is supported by the driver and the mock device supports it. The logic should be checking that the opcode is both not poison and not security. Fix the logic to allow poison and security commands. Fixes: ad64f5952ce3 ("cxl/memdev: Only show sanitize sysfs files when supported") Cc: <stable@vger.kernel.org> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230903-cxl-cel-fix-v1-1-e260c9467be3@intel.com [cleanup cxl_walk_cel() to centralized "enabled" checks] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-09-14nvme: avoid bogus CRTO valuesKeith Busch
Some devices are reporting controller ready mode support, but return 0 for CRTO. These devices require a much higher time to ready than that, so they are failing to initialize after the driver starter preferring that value over CAP.TO. The spec requires that CAP.TO match the appropritate CRTO value, or be set to 0xff if CRTO is larger than that. This means that CAP.TO can be used to validate if CRTO is reliable, and provides an appropriate fallback for setting the timeout value if not. Use whichever is larger. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863 Reported-by: Cláudio Sampaio <patola@gmail.com> Reported-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Felix Yan <felixonmars@archlinux.org> Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org> Cc: stable@vger.kernel.org Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-09-14thermal: core: Fix disabled trip point check in handle_thermal_trip()Rafael J. Wysocki
Commit bc840ea5f9a9 ("thermal: core: Do not handle trip points with invalid temperature") added a check for invalid temperature to the disabled trip point check in handle_thermal_trip(), but that check was added at a point when the trip structure has not been initialized yet. This may cause handle_thermal_trip() to skip a valid trip point in some cases, so fix it by moving the check to a suitable place, after __thermal_zone_get_trip() has been called to populate the trip structure. Fixes: bc840ea5f9a9 ("thermal: core: Do not handle trip points with invalid temperature") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-14Merge tag 'md-fixes-20230914' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.6 Pull MD fixes from Song: "These commits fix a bugzilla report [1] and some recent issues in 6.5 and 6.6. [1] https://bugzilla.kernel.org/show_bug.cgi?id=217798" * tag 'md-fixes-20230914' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Put the right device in md_seq_next md/raid1: fix error: ISO C90 forbids mixed declarations md: fix warning for holder mismatch from export_rdev() md: don't dereference mddev after export_rdev()
2023-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14md: Put the right device in md_seq_nextMariusz Tkaczyk
If there are multiple arrays in system and one mddevice is marked with MD_DELETED and md_seq_next() is called in the middle of removal then it _get()s proper device but it may _put() deleted one. As a result, active counter may never be zeroed for mddevice and it cannot be removed. Put the device which has been _get with previous md_seq_next() call. Cc: stable@vger.kernel.org Fixes: 12a6caf27324 ("md: only delete entries from all_mddevs when the disk is freed") Reported-by: AceLan Kao <acelan@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217798 Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230914152416.10819-1-mariusz.tkaczyk@linux.intel.com
2023-09-14Merge tag 'net-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite unusually, this does not contains any fix coming from subtrees (nf, ebpf, wifi, etc). Current release - regressions: - bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active() Previous releases - regressions: - ipv4: fix one memleak in __inet_del_ifa() - tcp: fix bind() regressions for v4-mapped-v6 addresses. - tls: do not free tls_rec on async operation in bpf_exec_tx_verdict() - dsa: fixes for SJA1105 FDB regressions - veth: update XDP feature set when bringing up device - igb: fix hangup when enabling SR-IOV Previous releases - always broken: - kcm: fix memory leak in error path of kcm_sendmsg() - smc: fix data corruption in smcr_port_add - microchip: fix possible memory leak for vcap_dup_rule()" * tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). net: renesas: rswitch: Add spin lock protection for irq {un}mask net: renesas: rswitch: Fix unmasking irq condition igb: clean up in all error paths when enabling SR-IOV ixgbe: fix timestamp configuration code selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c. selftest: tcp: Move expected_errno into each test case in bind_wildcard.c. selftest: tcp: Fix address length in bind_wildcard.c. tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address. tcp: Fix bind() regression for v4-mapped-v6 wildcard address. tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any). ipv6: fix ip6_sock_set_addr_preferences() typo veth: Update XDP feature set when bringing up device net: macb: fix sleep inside spinlock net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict() net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988 net: ethernet: mtk_eth_soc: fix uninitialized variable kcm: Fix memory leak in error path of kcm_sendmsg() r8152: check budget for r8152_poll() net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset ...
2023-09-14power: supply: rt9467: Fix rt9467_run_aicl()Christophe JAILLET
It is spurious to bail-out on a wait_for_completion_timeout() call that does NOT timeout. Reverse the logic to return -ETIMEDOUT instead, in case of tiemout. Fixes: 6f7f70e3a8dd ("power: supply: rt9467: Add Richtek RT9467 charger driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/2ed01020fa8a135c36dbaa871095ded47d926507.1676464968.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-14power: supply: rk817: Add missing module aliasNicolas Frattaroli
Similar to the rk817 codec alias that was missing, the rk817 charger driver is missing a module alias as well. This absence prevents the driver from autoprobing on OF systems when it is built as a module. Add the right MODULE_ALIAS to fix this. Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Reviewed-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20230612143651.959646-2-frattaroli.nicolas@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-14power: supply: ucs1002: fix error code in ucs1002_get_property()Dan Carpenter
This function is supposed to return 0 for success instead of returning the val->intval. This makes it the same as the other case statements in this function. Fixes: 81196e2e57fc ("power: supply: ucs1002: fix some health status issues") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/687f64a4-4c6e-4536-8204-98ad1df934e5@moroto.mountain Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-14dm: fix a race condition in retrieve_depsMikulas Patocka
There's a race condition in the multipath target when retrieve_deps races with multipath_message calling dm_get_device and dm_put_device. retrieve_deps walks the list of open devices without holding any lock but multipath may add or remove devices to the list while it is running. The end result may be memory corruption or use-after-free memory access. See this description of a UAF with multipath_message(): https://listman.redhat.com/archives/dm-devel/2022-October/052373.html Fix this bug by introducing a new rw semaphore "devices_lock". We grab devices_lock for read in retrieve_deps and we grab it for write in dm_get_device and dm_put_device. Reported-by: Luo Meng <luomeng12@huawei.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Tested-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-09-14udp: annotate data-races around udp->encap_typeEric Dumazet
syzbot/KCSAN complained about UDP_ENCAP_L2TPINUDP setsockopt() racing. Add READ_ONCE()/WRITE_ONCE() to document races on this lockless field. syzbot report was: BUG: KCSAN: data-race in udp_lib_setsockopt / udp_lib_setsockopt read-write to 0xffff8881083603fa of 1 bytes by task 16557 on cpu 0: udp_lib_setsockopt+0x682/0x6c0 udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read-write to 0xffff8881083603fa of 1 bytes by task 16554 on cpu 1: udp_lib_setsockopt+0x682/0x6c0 udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2779 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3697 __sys_setsockopt+0x1c9/0x230 net/socket.c:2263 __do_sys_setsockopt net/socket.c:2274 [inline] __se_sys_setsockopt net/socket.c:2271 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2271 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x05 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 16554 Comm: syz-executor.5 Not tainted 6.5.0-rc7-syzkaller-00004-gf7757129e3de #0 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14net: ethernet: mtk_wed: check update_wo_rx_stats in mtk_wed_update_rx_stats()Lorenzo Bianconi
Check if update_wo_rx_stats function pointer is properly set in mtk_wed_update_rx_stats routine before accessing it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/b0d233386e059bccb59f18f69afb79a7806e5ded.1694507226.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14net: ethernet: mtk_eth_soc: rely on mtk_pse_port definitions in ↵Lorenzo Bianconi
mtk_flow_set_output_device Similar to ethernet ports, rely on mtk_pse_port definitions for pse wdma ports as well. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/b86bdb717e963e3246c1dec5f736c810703cf056.1694506814.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14net: wangxun: move MDIO bus implementation to the libraryJiawen Wu
Move similar code of accessing MDIO bus from txgbe/ngbe to libwx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230912031424.721386-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14Merge tag 'drm-misc-fixes-2023-09-07' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One doc fix for drm/connector, one fix for amdgpu for an crash when VRAM usage is high, and one fix in gm12u320 to fix the timeout units in the code Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/w5nlld5ukeh6bgtljsxmkex3e7s7f4qquuqkv5lv4cv3uxzwqr@pgokpejfsyef
2023-09-14Revert "drm/vkms: Fix race-condition between the hrtimer and the atomic commit"Maíra Canal
This reverts commit a0e6a017ab56936c0405fe914a793b241ed25ee0. Unlocking a mutex in the context of a hrtimer callback is violating mutex locking rules, as mutex_unlock() from interrupt context is not permitted. Link: https://lore.kernel.org/dri-devel/ZQLAc%2FFwkv%2FGiVoK@phenom.ffwll.local/T/#t Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230914102024.1789154-1-mcanal@igalia.com
2023-09-14media: via: Use correct dependency for camera sensor driversSakari Ailus
The via camera controller driver selected ov7670 driver, however now that driver has dependencies and may no longer be selected unconditionally. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: v4l: Use correct dependency for camera sensor driversSakari Ailus
The Kconfig option that enables compiling camera sensor drivers is VIDEO_CAMERA_SENSOR rather than MEDIA_CAMERA_SUPPORT as it was previously. Fix this. Also select VIDEO_OV7670 for marvell platform drivers only if MEDIA_SUBDRV_AUTOSELECT and VIDEO_CAMERA_SENSOR are enabled. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: pci: ivsc: Select build dependenciesSakari Ailus
Select MEDIA_CONTROLLER, VIDEO_V4L2_SUBDEV_API and V4L2_ASYNC as the IVSC driver depends on all these. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308170227.ymiFlMbT-lkp@intel.com/ Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14net: renesas: rswitch: Add spin lock protection for irq {un}maskYoshihiro Shimoda
Add spin lock protection for irq {un}mask registers' control. After napi_complete_done() and this protection were applied, a lot of redundant interrupts no longer occur. For example: when "iperf3 -c <ipaddr> -R" on R-Car S4-8 Spider Before the patches are applied: about 800,000 times happened After the patches were applied: about 100,000 times happened Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14net: renesas: rswitch: Fix unmasking irq conditionYoshihiro Shimoda
Fix unmasking irq condition by using napi_complete_done(). Otherwise, redundant interrupts happen. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-14atl1c: Work around the DMA RX overflow issueSieng-Piaw Liew
This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com> Link: https://lore.kernel.org/r/20230912010711.12036-1-liew.s.piaw@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-13scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rportsJustin Tee
During rmmod, when dev_loss_tmo callback is called, an ndlp kref count is decremented twice. Once for SCSI transport registration and second to remove the initial node allocation kref. If there is also an NVMe transport registration, another reference count decrement is expected in lpfc_nvme_unregister_port(). Race conditions between the NVMe transport remoteport_delete and dev_loss_tmo callbacks sometimes results in premature ndlp object release resulting in use-after-free issues. Fix by not dropping the ndlp object in dev_loss_tmo callback with an outstanding NVMe transport registration. Inversely, mark the final NLP_DROPPED flag in lpfc_nvme_unregister_port when rmmod flag is set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230908211923.37603-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmoJustin Tee
When a dev_loss_tmo event occurs, an ndlp lock is taken before checking nlp_flag for NLP_DROPPED. There is an attempt to restore the ndlp lock when exiting the if statement, but the nlp_put kref could be the final decrement causing a use-after-free memory access on a released ndlp object. Instead of trying to reacquire the ndlp lock after checking nlp_flag, just return after calling nlp_put. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230908211852.37576-1-justintee8345@gmail.com Reviewed-by: "Ewan D. Milne" <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()Jinjie Ruan
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to check the return value. Fixes: 2fcbc569b9f5 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI") Fixes: 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures") Fixes: 6a828b0f6192 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues") Fixes: 95bfc6d8ad86 ("scsi: lpfc: Make FW logging dynamically configurable") Fixes: 9f77870870d8 ("scsi: lpfc: Add debugfs support for cm framework buffers") Fixes: c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com Reviewed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: target: core: Fix target_cmd_counter leakDavid Disseldorp
The target_cmd_counter struct allocated via target_alloc_cmd_counter() is never freed, resulting in leaks across various transport types, e.g.: unreferenced object 0xffff88801f920120 (size 96): comm "sh", pid 102, jiffies 4294892535 (age 713.412s) hex dump (first 32 bytes): 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8....... backtrace: [<00000000e58a6252>] kmalloc_trace+0x11/0x20 [<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod] [<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod] [<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop] [<000000006a80e021>] configfs_write_iter+0xb1/0x120 [<00000000e9f4d860>] vfs_write+0x2e4/0x3c0 [<000000008143433b>] ksys_write+0x80/0xb0 [<00000000a7df29b2>] do_syscall_64+0x42/0x90 [<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Free the structure alongside the corresponding iscsit_conn / se_sess parent. Signed-off-by: David Disseldorp <ddiss@suse.de> Link: https://lore.kernel.org/r/20230831183459.6938-1-ddiss@suse.de Fixes: becd9be6069e ("scsi: target: Move sess cmd counter to new struct") Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm8001: Setup IRQs on resumeDamien Le Moal
The function pm8001_pci_resume() only calls pm8001_request_irq() without calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which leads all drives being removed from the system. Fix this issue by integrating the code for pm8001_setup_irq() directly inside pm8001_request_irq() so that MSI-X setup is performed both during normal initialization and resume operations. Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm80xx: Avoid leaking tags when processing ↵Michal Grzedzicki
OPC_INB_SET_CONTROLLER_CONFIG command Tags allocated for OPC_INB_SET_CONTROLLER_CONFIG command need to be freed when we receive the response. Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230911170340.699533-2-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki
Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13Merge branch '6.6/scsi-staging' into 6.6/scsi-fixesMartin K. Petersen
Pull in staged fixes for 6.6. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-09-13idpf: add SRIOV support and other ndo_opsJoshua Hay
Add support for SRIOV: send the requested number of VFs to the device Control Plane, via the virtchnl message and then enable the VFs using 'pci_enable_sriov'. Add other ndo ops supported by the driver such as features_check, set_rx_mode, validate_addr, set_mac_address, change_mtu, get_stats64, set_features, and tx_timeout. Initialize the statistics task which requests the queue related statistics to the CP. Add loopback and promiscuous mode support and the respective virtchnl messages. Finally, add documentation and build support for the driver. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add ethtool callbacksAlan Brady
Initialize all the ethtool ops that are supported by the driver and add the necessary support for the ethtool callbacks. Also add asynchronous link notification virtchnl support where the device Control Plane sends the link status and link speed as an asynchronous event message. Driver report the link speed on ethtool .idpf_get_link_ksettings query. Introduce soft reset function which is used by some of the ethtool callbacks such as .set_channels, .set_ringparam etc. to change the existing queue configuration. It deletes the existing queues by sending delete queues virtchnl message to the CP and calls the 'vport_stop' flow which disables the queues, vport etc. New set of queues are requested to the CP and reconfigure the queue context by calling the 'vport_open' flow. Soft reset flow also adjusts the number of vectors associated to a vport if .set_channels is called. Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add singleq start_xmit and napi pollJoshua Hay
Add the start_xmit, TX and RX napi poll support for the single queue model. Unlike split queue model, single queue uses same queue to post buffer descriptors and completed descriptors. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add RX splitq napi poll supportAlan Brady
Add support to handle interrupts for the RX completion queue and RX buffer queue. When the interrupt fires on RX completion queue, process the RX descriptors that are received. Allocate and prepare the SKB with the RX packet info, for both data and header buffer. IDPF uses software maintained refill queues to manage buffers between RX queue producer and the buffer queue consumer. They are required in order to maintain a lockless buffer management system and are strictly software only constructs. Instead of updating the RX buffer queue tail with available buffers right after the clean routine, it posts the buffer ids to the refill queues, only to post them to the HW later. If the generic receive offload (GRO) is enabled in the capabilities and turned on by default or via ethtool, then HW performs the packet coalescing if certain criteria are met by the incoming packets and updates the RX descriptor. Similar to GRO, if generic checksum is enabled, HW computes the checksum and updates the respective fields in the descriptor. Add support to update the SKB fields with the GRO and the generic checksum received. Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add TX splitq napi poll supportJoshua Hay
Add support to handle the interrupts for the TX completion queue and process the various completion types. In the flow scheduling mode, the driver processes primarily buffer completions as well as descriptor completions occasionally. This mode supports out of order TX completions. To do so, HW generates one buffer completion per packet. Each of those completions contains the unique tag provided during the TX encoding which is used to locate the packet either on the TX buffer ring or in a hash table. The hash table is used to track TX buffer information so the descriptor(s) for a given packet can be reused while the driver is still waiting on the buffer completion(s). Packets end up in the hash table in one of 2 ways: 1) a packet was stashed during descriptor completion cleaning, or 2) because an out of order buffer completion was processed. A descriptor completion arrives only every so often and is primarily used to guarantee the TX descriptor ring can be reused without having to wait on the individual buffer completions. E.g. a descriptor completion for N+16 guarantees HW read all of the descriptors for packets N through N+15, therefore all of the buffers for packets N through N+15 are stashed into the hash table and the descriptors can be reused for more TX packets. Similarly, a packet can be stashed in the hash table because an out an order buffer completion was processed. E.g. processing a buffer completion for packet N+3 implies that HW read all of the descriptors for packets N through N+3 and they can be reused. However, the HW did not do the DMA yet. The buffers for packets N through N+2 cannot be freed, so they are stashed in the hash table. In either case, the buffer completions will eventually be processed for all of the stashed packets, and all of the buffers will be cleaned from the hash table. In queue based scheduling mode, the driver processes primarily descriptor completions and cleans the TX ring the conventional way. Finally, the driver triggers a TX queue drain after sending the disable queues virtchnl message. When the HW completes the queue draining, it sends the driver a queue marker packet completion. The driver determines when all TX queues have been drained and proceeds with the disable flow. With this, the driver can send TX packets and clean up the resources properly. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add splitq start_xmitJoshua Hay
Add start_xmit support for split queue model. To start with, add the necessary checks to linearize the skb if it uses more number of buffers than the hardware supported limit. Stop the transmit queue if there are no enough descriptors available for the skb to use or if there we're going to potentially overrun the completion queue. Finally prepare the descriptor with all the required information and update the tail. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: initialize interrupts and enable vportPavan Kumar Linga
To further continue 'vport open', initialize all the resources required for the interrupts. To start with, initialize the queue vector indices with the ones received from the device Control Plane. Now that all the TX and RX queues are initialized, map the RX descriptor and buffer queues as well as TX completion queues to the allocated vectors. Initialize and enable the napi handler for the napi polling. Finally, request the IRQs for the interrupt vectors from the stack and setup the interrupt handler. Once the interrupt init is done, send 'map queue vector', 'enable queues' and 'enable vport' virtchnl messages to the CP to complete the 'vport open' flow. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: configure resources for RX queuesAlan Brady
Similar to the TX, RX also supports both single and split queue models. In single queue model, the same descriptor queue is used by SW to post buffer descriptors to HW and by HW to post completed descriptors to SW. In split queue model, "RX buffer queues" are used to pass descriptor buffers from SW to HW whereas "RX queues" are used to post the descriptor completions i.e. descriptors that point to completed buffers, from HW to SW. "RX queue group" is a set of RX queues grouped together and will be serviced by a "RX buffer queue group". IDPF supports 2 buffer queues i.e. large buffer (4KB) queue and small buffer (2KB) queue per buffer queue group. HW uses large buffers for 'hardware gro' feature and also if the packet size is more than 2KB, if not 2KB buffers are used. Add all the resources required for the RX queues initialization. Allocate memory for the RX queue and RX buffer queue groups. Initialize the software maintained refill queues for buffer management algorithm. Same like the TX queues, initialize the queue parameters for the RX queues and send the config RX queue virtchnl message to the device Control Plane. Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: configure resources for TX queuesAlan Brady
IDPF supports two queue models i.e. single queue which is a traditional queueing model as well as split queue model. In single queue model, the same descriptor queue is used by SW to post descriptors to the HW, HW to post completed descriptors to SW. In split queue model, "TX Queues" are used to pass buffers from SW to HW and "TX Completion Queues" are used to post descriptor completions from HW to SW. Device supports asymmetric ratio of TX queues to TX completion queues. Considering this, queue group mechanism is used i.e. some TX queues are grouped together which will be serviced by only one TX completion queue per TX queue group. Add all the resources required for the TX queues initialization. To start with, allocate memory for the TX queue groups, TX queues and TX completion queues. Then, allocate the descriptors for both TX and TX completion queues, and bookkeeping buffers for TX queues alone. Also, allocate queue vectors for the vport and initialize the TX queue related fields for each queue vector. Initialize the queue parameters such as q_id, q_type and tail register offset with the info received from the device control plane (CP). Once all the TX queues are configured, send config TX queue virtchnl message to the CP with all the TX queue context information. Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Alice Michael <alice.michael@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add ptypes and MAC filter supportPavan Kumar Linga
Add the virtchnl support to request the packet types. Parse the responses received from CP and based on the protocol headers, populate the packet type structure with necessary information. Initialize the MAC address and add the virtchnl support to add and del MAC address. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add create vport and netdev configurationPavan Kumar Linga
Add the required support to create a vport by spawning the init task. Once the vport is created, initialize and allocate the resources needed for it. Configure and register a netdev for each vport with all the features supported by the device based on the capabilities received from the device Control Plane. Spawn the init task till all the default vports are created. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add core init and interrupt requestPavan Kumar Linga
As the mailbox is setup, add the necessary send and receive mailbox message framework to support the virtchnl communication between the driver and device Control Plane (CP). Add the core initialization. To start with, driver confirms the virtchnl version with the CP. Once that is done, it requests and gets the required capabilities and resources needed such as max vectors, queues etc. Based on the vector information received in 'VIRTCHNL2_OP_GET_CAPS', request the stack to allocate the required vectors. Finally add the interrupt handling mechanism for the mailbox queue and enable the interrupt. Note: Checkpatch issues a warning about IDPF_FOREACH_VPORT_VC_STATE and IDPF_GEN_STRING being complex macros and should be enclosed in parentheses but it's not the case. They are never used as a statement and instead only used to define the enum and array. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add controlq init and reset checksJoshua Hay
At the end of the probe, initialize and schedule the event workqueue. It calls the hard reset function where reset checks are done to find if the device is out of the reset. Control queue initialization and the necessary control queue support is added. Introduce function pointers for the register operations which are different between PF and VF devices. Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13idpf: add module register and probe functionalityPhani Burra
Add the required support to register IDPF PCI driver, as well as probe and remove call backs. Enable the PCI device and request the kernel to reserve the memory resources that will be used by the driver. Finally map the BAR0 address space. Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Signed-off-by: Shailendra Bhatnagar <shailendra.bhatnagar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13virtchnl: add virtchnl version 2 opsPavan Kumar Linga
Virtchnl version 1 is an interface used by the current generation of foundational NICs to negotiate the capabilities and configure the HW resources such as queues, vectors, RSS LUT, etc between the PF and VF drivers. It is not extensible to enable new features supported in the next generation of NICs/IPUs and to negotiate descriptor types, packet types and register offsets. To overcome the limitations of the existing interface, introduce the virtchnl version 2 and add the necessary opcodes, structures, definitions, and descriptor formats. The driver also learns the data queue and other register offsets to use instead of hardcoding them. The advantage of this approach is that it gives the flexibility to modify the register offsets if needed, restrict the use of certain descriptor types and negotiate the supported packet types. Co-developed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Alan Brady <alan.brady@intel.com> Co-developed-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Co-developed-by: Madhu Chittim <madhu.chittim@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Co-developed-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Co-developed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-13Merge tag 'pmdomain-v6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull genpm / pmdomain rename from Ulf Hansson: "This renames the genpd subsystem to pmdomain. As discussed on LKML, using 'genpd' as the name of a subsystem isn't very self-explanatory and the acronym itself that means Generic PM Domain, is known only by a limited group of people. The suggestion to improve the situation is to rename the subsystem to 'pmdomain', which there seems to be a good consensus around using. Ideally it should indicate that its purpose is to manage Power Domains or 'PM domains' as we often also use within the Linux Kernel terminology" * tag 'pmdomain-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: Rename the genpd subsystem to pmdomain
2023-09-13Merge tag 'tpmdd-v6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fix from Jarkko Sakkinen. * tag 'tpmdd-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: Fix typo in tpmrm class definition
2023-09-13Merge tag 'parisc-for-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - fix reference to exported symbols for parisc64 [Masahiro Yamada] - Block-TLB (BTLB) support on 32-bit CPUs - sparse and build-warning fixes * tag 'parisc-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: linux/export: fix reference to exported functions for parisc64 parisc: BTLB: Initialize BTLB tables at CPU startup parisc: firmware: Simplify calling non-PA20 functions parisc: BTLB: _edata symbol has to be page aligned for BTLB support parisc: BTLB: Add BTLB insert and purge firmware function wrappers parisc: BTLB: Clear possibly existing BTLB entries parisc: Prepare for Block-TLB support on 32-bit kernel parisc: shmparam.h: Document aliasing requirements of PA-RISC parisc: irq: Make irq_stack_union static to avoid sparse warning parisc: drivers: Fix sparse warning parisc: iosapic.c: Fix sparse warnings parisc: ccio-dma: Fix sparse warnings parisc: sba-iommu: Fix sparse warnigs parisc: sba: Fix compile warning wrt list of SBA devices parisc: sba_iommu: Fix build warning if procfs if disabled
2023-09-13firmware: cirrus: cs_dsp: Only log list of algorithms in debug buildRichard Fitzgerald
Change the logging of each algorithm from info level to debug level. On the original devices supported by this code there were typically only one or two algorithms in a firmware and one or two DSPs so this logging only used a small number of log lines. However, for the latest devices there could be 30-40 algorithms in a firmware and 8 DSPs being loaded in parallel, so using 300+ lines of log for information that isn't particularly important to have logged. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230913160523.3701189-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-30 18:49:49 +0000