summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-20mmc: sdhci-brcmstb: Add ability to use HS400ES transfer modeAl Cooper
The latest eMMC JEDEC specification version 5.1 added a new transfer mode, HS400 with enhanced strobe (HS400ES). This mode will be selected if both the host controller and eMMC device support it. The latest Arasan 5.1 controller in the 7216a0 supports this mode. The "Host Controller Specification" has not been updated so the controller register bit used to enable this mode is not specified and varies the with controller vendor. The Linux SDHCI driver supplies a callback for enabling HS400ES mode and that callback will be used to supply a routine that will set the proper bit in the Arasan Vendor register. Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20200113210706.11972-3-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: core: limit probe clock frequency to configured f_maxMichał Mirosław
Currently MMC core disregards host->f_max during card initialization phase. Obey upper boundary for the clock frequency and skip faster speeds when they are above the limit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/f471bceaf237d582d746bd289c4c4f3639cb7b45.1577962382.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-milbeaut: Remove redundant platform_get_irq error messageYueHaibing
platform_get_irq() will call dev_err() itself on failure, so there is no need for the driver to also do this. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116144322.57308-1-yuehaibing@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: fix an issue of mixing different typesChunyan Zhang
Fix an issue reported by sparse, since mixed types of parameters are used on calling dmaengine_prep_slave_sg(). Fixes: 36e1da441fec (mmc: sdhci: add support for using external DMA devices) Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200120033223.897-1-zhang.chunyan@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20r8169: use generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
Replace rtl8169_ioctl with new generic function phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: phy: add generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20Merge branch 'fixes' into nextUlf Hansson
2020-01-20platform/x86: asus-nb-wmi: Support left round button on N56VBPaul Cercueil
The N56VB laptop has a round button located on the left side above the keyboard. Map it to F13 since it does not have any predeterminated purpose. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20platform/x86: ISST: Allow additional core-power mailbox commandsSrinivas Pandruvada
To discover core-power capability, some new mailbox commands are added. Allow those commands to execute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-01-20mmc: sdhci: fix minimum clock rate for v3 controllerMichał Mirosław
For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa3264af4: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add special reset capabilityFaiz Abbas
Some omap controllers need software to monitor a 0->1->0 for software reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-11-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add am335x and am437x specific compatiblesFaiz Abbas
Add support for new compatible for TI's am335x and am437x devices. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-10-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Disable data timeout interrupt during eraseFaiz Abbas
Disable data timeout interrupt during an erase operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-8-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Refactor sdhci_set_timeout()Faiz Abbas
Refactor sdhci_set_timeout() such that platform drivers can do some functionality in a set_timeout() callback and then call __sdhci_set_timeout() to complete the operation. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Convert sdhci_set_timeout_irq() to non-staticFaiz Abbas
Export sdhci_set_timeout_irq() so that it is accessible from platform drivers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci-omap: Add using external dmaChunyan Zhang
sdhci-omap can support both external dma controller via dmaengine framework as well as ADMA which standard SD host controller provides. Fixes by Faiz Abbas <fazi_abbas@ti.com>: 1. Switch to DMA slave mode when using external DMA 2. Add offset to mapbase Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: add support for using external DMA devicesChunyan Zhang
Some standard SD host controllers can support both external dma controllers as well as ADMA/SDMA in which the SD host controller acts as DMA master. TI's omap controller is the case as an example. Currently the generic SDHCI code supports ADMA/SDMA integrated in the host controller but does not have any support for external DMA controllers implemented using dmaengine, meaning that custom code is needed for any systems that use an external DMA controller with SDHCI. Fixes by Faiz Abbas <faiz_abbas@ti.com>: 1. Map scatterlists before dmaengine_prep_slave_sg() 2. Use dma_async() functions inside of the send_command() path and call terminate_sync() in non-atomic context in case of an error. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20mmc: sdhci: Factor out some operations set to their own functionsFaiz Abbas
In preparation for adding external dma support, factor out data initialization, block info and mrq_done to their own functions. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Tested-by: Baolin Wang <baolin.wang7@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200116105154.7685-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-01-20net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family membersAndrew Lunn
The SERDES statistics are valid for all members of the 6390 family, not just the 6390 itself. Add the needed callbacks to all members of the family. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: phylink: allow in-band AN for USXGMIIAlex Marginean
USXGMII supports passing link information in-band between PHY and MAC PCS, add it to the list of protocols that support in-band AN mode. Being a MAC-PHY protocol that can auto-negotiate link speeds up to 10 Gbps, we populate the initial supported mask with the entire spectrum of link modes up to 10G that PHYLINK supports, and we let the driver reduce that mask in its .phylink_validate method. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20irqchip/sifive-plic: Support irq domain hierarchyYash Shah
Add support for hierarchical irq domains. This is needed as pre-requisite for gpio-sifive driver. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-4-git-send-email-yash.shah@sifive.com
2020-01-20irqchip/nvic: Use irq_domain_translate_onecell instead of custom funcYash Shah
Make use of newly introduced irq_domain_translate_onecell() instead of custom made function. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-3-git-send-email-yash.shah@sifive.com
2020-01-20net: phy: don't crash in phy_read/_write_mmd without a PHY driverAlex Marginean
The APIs can be used by Ethernet drivers without actually loading a PHY driver. This may become more widespread in the future with 802.3z compatible MAC PCS devices being locally driven by the MAC driver when configuring for a PHY mode with in-band negotiation. Check that drv is not NULL before reading from it. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modesVladimir Oltean
For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission. Also include the 2500Base-X fiber mode in this list while we're at it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20net: stmmac: modified pcs mode support for RGMIIDejin Zheng
snps databook noted that physical coding sublayer (PCS) interface that can be used when the MAC is configured for the TBI, RTBI, or SGMII PHY interface. we have RGMII and SGMII in a SoC and it also has the PCS block. it needs stmmac_init_phy and stmmac_mdio_register function for initializing phy when it used RGMII interface. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcountchenqiwu
brcm_avs_cpufreq_get() calls cpufreq_cpu_get() to get the cpufreq policy, meanwhile, it also increments the kobject reference count to mark it busy. However, a corresponding call of cpufreq_cpu_put() is ignored to decrement the kobject reference count back, which may lead to a potential stuck risk that the cpuhp thread deadly waits for dropping of kobject refcount when cpufreq policy free. With this patch, the cpuhp thread can be easily exercised by attempting to force an unbind of the CPUfreq driver. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> [ Viresh: Dropped !policy check ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-01-20Merge tag 'v5.5-rc7' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-20efi: Fix handling of multiple efi_fake_mem= entriesDan Williams
Dave noticed that when specifying multiple efi_fake_mem= entries only the last entry was successfully being reflected in the efi memory map. This is due to the fact that the efi_memmap_insert() is being called multiple times, but on successive invocations the insertion should be applied to the last new memmap rather than the original map at efi_fake_memmap() entry. Rework efi_fake_memmap() to install the new memory map after each efi_fake_mem= entry is parsed. This also fixes an issue in efi_fake_memmap() that caused it to litter emtpy entries into the end of the efi memory map. An empty entry causes efi_memmap_insert() to attempt more memmap splits / copies than efi_memmap_split_count() accounted for when sizing the new map. When that happens efi_memmap_insert() may overrun its allocation, and if you are lucky will spill over to an unmapped page leading to crash signature like the following rather than silent corruption: BUG: unable to handle page fault for address: ffffffffff281000 [..] RIP: 0010:efi_memmap_insert+0x11d/0x191 [..] Call Trace: ? bgrt_init+0xbe/0xbe ? efi_arch_mem_reserve+0x1cb/0x228 ? acpi_parse_bgrt+0xa/0xd ? acpi_table_parse+0x86/0xb8 ? acpi_boot_init+0x494/0x4e3 ? acpi_parse_x2apic+0x87/0x87 ? setup_acpi_sci+0xa2/0xa2 ? setup_arch+0x8db/0x9e1 ? start_kernel+0x6a/0x547 ? secondary_startup_64+0xb6/0xc0 Commit af1648984828 "x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage" introduced more occurrences where efi_memmap_insert() is invoked after an efi_fake_mem= configuration has been parsed. Previously the side effects of vestigial empty entries were benign, but with commit af1648984828 that follow-on efi_memmap_insert() invocation triggers efi_memmap_insert() overruns. Reported-by: Dave Young <dyoung@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20191231014630.GA24942@dhcp-128-65.nay.redhat.com Link: https://lore.kernel.org/r/20200113172245.27925-14-ardb@kernel.org
2020-01-20efi: Fix efi_memmap_alloc() leaksDan Williams
With efi_fake_memmap() and efi_arch_mem_reserve() the efi table may be updated and replaced multiple times. When that happens a previous dynamically allocated efi memory map can be garbage collected. Use the new EFI_MEMMAP_{SLAB,MEMBLOCK} flags to detect when a dynamically allocated memory map is being replaced. Debug statements in efi_memmap_free() reveal: efi: __efi_memmap_free:37: phys: 0x23ffdd580 size: 2688 flags: 0x2 efi: __efi_memmap_free:37: phys: 0x9db00 size: 2640 flags: 0x2 efi: __efi_memmap_free:37: phys: 0x9e580 size: 2640 flags: 0x2 ...a savings of 7968 bytes on a qemu boot with 2 entries specified to efi_fake_mem=. [ ardb: added a comment to clarify that efi_memmap_free() does nothing when called from efi_clean_memmap(), i.e., with data->flags == 0x0 ] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-13-ardb@kernel.org
2020-01-20efi: Add tracking for dynamically allocated memmapsDan Williams
In preparation for fixing efi_memmap_alloc() leaks, add support for recording whether the memmap was dynamically allocated from slab, memblock, or is the original physical memmap provided by the platform. Given this tracking is established in efi_memmap_alloc() and needs to be carried to efi_memmap_install(), use 'struct efi_memory_map_data' to convey the flags. Some small cleanups result from this reorganization, specifically the removal of local variables for 'phys' and 'size' that are already tracked in @data. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-12-ardb@kernel.org
2020-01-20efi: Add a flags parameter to efi_memory_mapDan Williams
In preparation for garbage collecting dynamically allocated EFI memory maps, where the allocation method of memblock vs slab needs to be recalled, convert the existing 'late' flag into a 'flags' bitmask. Arrange for the flag to be passed via 'struct efi_memory_map_data'. This structure grows additional flags in follow-on changes. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-11-ardb@kernel.org
2020-01-20efi: Fix comment for efi_mem_type() wrt absent physical addressesAnshuman Khandual
A previous commit f99afd08a45f ("efi: Update efi_mem_type() to return an error rather than 0") changed the return value from EFI_RESERVED_TYPE to -EINVAL when the searched physical address is not present in any memory descriptor. But the comment preceding the function never changed. Let's change the comment now to reflect the new return value -EINVAL. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-10-ardb@kernel.org
2020-01-20efi/arm: Defer probe of PCIe backed efifb on DT systemsArd Biesheuvel
The new of_devlink support breaks PCIe probing on ARM platforms booting via UEFI if the firmware exposes a EFI framebuffer that is backed by a PCI device. The reason is that the probing order gets reversed, resulting in a resource conflict on the framebuffer memory window when the PCIe probes last, causing it to give up entirely. Given that we rely on PCI quirks to deal with EFI framebuffers that get moved around in memory, we cannot simply drop the memory reservation, so instead, let's use the device link infrastructure to register this dependency, and force the probing to occur in the expected order. Co-developed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200113172245.27925-9-ardb@kernel.org
2020-01-20Merge tag 'v5.5-rc7' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix non-blocking connect() in x25, from Martin Schiller. 2) Fix spurious decryption errors in kTLS, from Jakub Kicinski. 3) Netfilter use-after-free in mtype_destroy(), from Cong Wang. 4) Limit size of TSO packets properly in lan78xx driver, from Eric Dumazet. 5) r8152 probe needs an endpoint sanity check, from Johan Hovold. 6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from John Fastabend. 7) hns3 needs short frames padded on transmit, from Yunsheng Lin. 8) Fix netfilter ICMP header corruption, from Eyal Birger. 9) Fix soft lockup when low on memory in hns3, from Yonglong Liu. 10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan. 11) Fix memory leak in act_ctinfo, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) cxgb4: reject overlapped queues in TC-MQPRIO offload cxgb4: fix Tx multi channel port rate limit net: sched: act_ctinfo: fix memory leak bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal. bnxt_en: Fix ipv6 RFS filter matching logic. bnxt_en: Fix NTUPLE firmware command failures. net: systemport: Fixed queue mapping in internal ring map net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec net: dsa: sja1105: Don't error out on disabled ports with no phy-mode net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset net: hns: fix soft lockup when there is not enough memory net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key() net/sched: act_ife: initalize ife->metalist earlier netfilter: nat: fix ICMP header corruption on ICMP errors net: wan: lapbether.c: Use built-in RCU list checking netfilter: nf_tables: fix flowtable list del corruption netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks() netfilter: nf_tables: remove WARN and add NLA_STRING upper limits netfilter: nft_tunnel: ERSPAN_VERSION must not be null netfilter: nft_tunnel: fix null-attribute check ...
2020-01-19Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two runtime PM fixes and one leak fix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: iop3xx: Fix memory leak in probe error path i2c: tegra: Properly disable runtime PM on driver's probe error i2c: tegra: Fix suspending in active runtime PM state
2020-01-19mlxsw: Add OVERLAY_SMAC_MC trapAmit Cohen
Add a trap for NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add tunnel devlink-trap supportAmit Cohen
Add the trap IDs and trap group used to report tunnel drops. Register tunnel packet traps and associated tunnel trap group with devlink during driver initialization. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: spectrum_trap: Reorder cases according to enum orderAmit Cohen
Move L3_DROPS case to appear after L2_DROPS case. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add ECN configurations with IPinIP tunnelsAmit Cohen
Initialize ECN mapping registers during router init according to INET_ECN_encapsulate() and INET_ECN_decapsulate(). For IP-in-IP encapsulation, this is required to ensure that ECN bits in the underlay are set in accordance with the kernel. For decapsulation, this is required to ensure that packets with invalid ECN combination in underlay and overlay are trapped to the kernel and not forwarded. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Decapsulation ECN Mapping RegisterAmit Cohen
This register configures the actions that are done during IPinIP decapsulation based on the ECN bits. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: reg: Add Tunneling IPinIP Encapsulation ECN Mapping RegisterAmit Cohen
This register performs mapping from overlay ECN to underlay ECN during IPinIP encapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add NON_ROUTABLE trapAmit Cohen
Add a trap for packets that the device decided to drop because they are not supposed to be routed. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19mlxsw: Add irif and erif disabled trapsAmit Cohen
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are dropped for these reasons when they need to be routed through/from existing router interfaces (RIF) which are disabled. Add devlink driver-specific traps and mlxsw trap IDs used to report these traps. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge branch 'for-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 E-Switch chains and prios This series has two parts, 1) A merge commit with mlx5-next branch that include updates for mlx5 HW layouts needed for this and upcoming submissions. 2) From Paul, Increase the number of chains and prios Currently the Mellanox driver supports offloading tc rules that are defined on the first 4 chains and the first 16 priorities. The restriction stems from the firmware flow level enforcement requiring a flow table of a certain level to point to a flow table of a higher level. This limitation may be ignored by setting the ignore_flow_level bit when creating flow table entries. Use unmanaged tables and ignore flow level to create more tables than declared by fs_core steering. Manually manage the connections between the tables themselves. HW table is instantiated for every tc <chain,prio> tuple. The miss rule of every table either jumps to the next <chain,prio> table, or continues to slow_fdb. This logic is realized by following this sequence: 1. Create an auto-grouped flow table for the specified priority with reserved entries Reserved entries are allocated at the end of the flow table. Flow groups are evaluated in sequence and therefore it is guaranteed that the flow group defined on the last FTEs will be the last to evaluate. Define a "match all" flow group on the reserved entries, providing the platform to add table miss actions. 2. Set the miss rule action to jump to the next <chain,prio> table or the slow_fdb. 3. Link the previous priority table to point to the new table by updating its miss rule. Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: phy: adin: fix a warning about msleepDejin Zheng
found a warning by the following command: ./scripts/checkpatch.pl -f drivers/net/phy/adin.c WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst #628: FILE: drivers/net/phy/adin.c:628: + msleep(10); Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes linkAlex Marginean
If the serdes link is set to 2500 using interfce type 2500base-X, lower link speeds over on the line side should still be supported. Rate adaptation is done out of band, in our case using AQR PHYs this is done using flow control. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 04:13:19 +0000