summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-17hwmon: (adt7475) Make volt2reg return same reg as reg2volt inputLuuk Paulussen
reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (nct7802) Fix non-working alarm on voltagesGilles Buloz
No alarm is reported by /sys/.../inX_alarm In detail: The SMI Voltage status register is the only register giving a status for voltages, but it does not work like the non-SMI status registers used for temperatures and fans. A bit is set for each input crossing a threshold, in both direction, but the "inside" or "outside" limits info is not available. Also this register is cleared on read. Note : this is not explicitly spelled out in the datasheet, but from experiment. As a result if an input is crossing a threshold (min or max in any direction), the alarm is reported only once even if the input is still outside limits. Also if the alarm for another input is read before the one of this input, no alarm is reported at all. Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/5de0f566.tBga5POKAgHlmd0p%gilles.buloz@kontron.com Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17hwmon: (nct7802) Fix voltage limits to wrong registersGilles Buloz
in0 thresholds are written to the in2 thresholds registers in2 thresholds to in3 thresholds in3 thresholds to in4 thresholds in4 thresholds to in0 thresholds Signed-off-by: Gilles Buloz <gilles.buloz@kontron.com> Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-17spi: npcm-pspi: modify reset supportTomer Maimon
Modify NPCM perphiral SPI reset support from direct register access to reset controller support. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20200115162301.235926-5-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17spi: npcm-pspi: improve spi transfer performanceTomer Maimon
Improving spi 8 bit per word mode transfer performance by using 16 bit per word transfer and receive when the data length is even and larger than one. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20200115162301.235926-3-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17spi: spi-ti-qspi: fix warningJean Pihet
drivers/spi/spi-ti-qspi.c: In function ‘ti_qspi_start_transfer_one’: drivers/spi/spi-ti-qspi.c:392:8: warning: ‘rx_wlen’ may be used uninitialized in this function [-Wmaybe-uninitialized] 392 | if (rx_wlen >= 32) | ^ drivers/spi/spi-ti-qspi.c:318:12: note: ‘rx_wlen’ was declared here 318 | u8 rxlen, rx_wlen; | ^~~~~~~ The warning is a false positive; it is not thrown by all compiler versions, e.g. Red Hat Cross 9.2.1-1 but not Linaro GCC 7.5-2019.12. Signed-off-by: Jean Pihet <jean.pihet@newoldbits.com> Link: https://lore.kernel.org/r/20200115100700.3357-1-jean.pihet@newoldbits.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17spi: npcm-pspi: fix 16 bit send and receive supportTomer Maimon
Fixing NPCM BMC Peripheral SPI controller 16 bit send and receive support by writing and reading the SPI data in the right order. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/20200115162301.235926-2-tmaimon77@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17spi: pxa2xx: Add support for Intel Comet Lake PCH-VJarkko Nikula
Add support for Intel Comet Lake PCH-V which has the same LPSS than on Intel Kaby lake unlike other Intel Comet Lake PCH variants that are based on Intel Cannon Lake PCH LPSS. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20200116091035.575175-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: mpq7920: Fix incorrect definesAxel Lin
Fix defines for MPQ7920_MASK_BUCK_ILIM and MPQ7920_DISCHARGE_ON Remove unused MPQ7920_REG_REGULATOR_EN1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20200115002953.14731-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200116023344.163592-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17regulator: vctrl-regulator: Avoid deadlock getting and setting the voltageEnric Balletbo i Serra
`cat /sys/kernel/debug/regulator/regulator_summary` ends on a deadlock when you have a voltage controlled regulator (vctrl). The problem is that the vctrl_get_voltage() and vctrl_set_voltage() calls the regulator_get_voltage() and regulator_set_voltage() and that will try to lock again the dependent regulators (the regulator supplying the control voltage). Fix the issue by exporting the unlocked version of the regulator_get_voltage() and regulator_set_voltage() API so drivers that need it, like the voltage controlled regulator driver can use it. Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200116094543.2847321-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-17USB: serial: quatech2: handle unbound portsJohan Hovold
Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: keyspan: handle unbound portsJohan Hovold
Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold
The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold
Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold
Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device treeZeng Tao
When the kernel is configured with CONFIG_NR_CPUS smaller than the number of CPU nodes in the device tree(DT), all the CPU nodes parsing done to fetch topology information will fail. This is not reasonable as it is legal to have all the physical CPUs in the system in the DT. Let us just skip such CPU DT nodes that are not used in the kernel rather than returning an error. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Link: https://lore.kernel.org/r/1579225973-32423-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17Merge tag 'gpio-v5.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "This reverts the GPIOLIB_IRQCHIP in the ThunderX driver. ThunderX is a piece of Arm-based server chip. I converted the driver to hierarchical gpiochip without access to real silicon and failed miserably since I didn't take MSI's into account. Kevin Hao helpfully stepped in and fixed it properly, let's revert it for v5.5 and put the proper conversion into v5.6" * tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
2020-01-17Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Three fixes that should go into this release: - The 32-bit segment size fix that I mentioned last week (Ming) - Use uint for the block size (Mikulas) - A null_blk zone write handling fix (Damien)" * tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block: block: fix an integer overflow in logical block size null_blk: Fix zone write handling block: fix get_max_segment_size() overflow on 32bit arch
2020-01-17ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()Hanjun Guo
The IORT specification [0] (Section 3, table 4, page 9) defines the 'Number of IDs' as 'The number of IDs in the range minus one'. However, the IORT ID mapping function iort_id_map() treats the 'Number of IDs' field as if it were the full IDs mapping count, with the following check in place to detect out of boundary input IDs: InputID >= Input base + Number of IDs This check is flawed in that it considers the 'Number of IDs' field as the full number of IDs mapping and disregards the 'minus one' from the IDs count. The correct check in iort_id_map() should be implemented as: InputID > Input base + Number of IDs this implements the specification correctly but unfortunately it breaks existing firmwares that erroneously set the 'Number of IDs' as the full IDs mapping count rather than IDs mapping count minus one. e.g. PCI hostbridge mapping entry 1: Input base: 0x1000 ID Count: 0x100 Output base: 0x1000 Output reference: 0xC4 //ITS reference PCI hostbridge mapping entry 2: Input base: 0x1100 ID Count: 0x100 Output base: 0x2000 Output reference: 0xD4 //ITS reference Two mapping entries which the second entry's Input base = the first entry's Input base + ID count, so for InputID 0x1100 and with the correct InputID check in place in iort_id_map() the kernel would map the InputID to ITS 0xC4 not 0xD4 as it would be expected. Therefore, to keep supporting existing flawed firmwares, introduce a workaround that instructs the kernel to use the old InputID range check logic in iort_id_map(), so that we can support both firmwares written with the flawed 'Number of IDs' logic and the correct one as defined in the specifications. [0]: http://infocenter.arm.com/help/topic/com.arm.doc.den0049d/DEN0049D_IO_Remapping_Table.pdf Reported-by: Pankaj Bansal <pankaj.bansal@nxp.com> Link: https://lore.kernel.org/linux-acpi/20191215203303.29811-1-pankaj.bansal@nxp.com/ Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Pankaj Bansal <pankaj.bansal@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-17net: systemport: Fixed queue mapping in internal ring mapFlorian Fainelli
We would not be transmitting using the correct SYSTEMPORT transmit queue during ndo_select_queue() which looks up the internal TX ring map because while establishing the mapping we would be off by 4, so for instance, when we populate switch port mappings we would be doing: switch port 0, queue 0 -> ring index #0 switch port 0, queue 1 -> ring index #1 ... switch port 0, queue 3 -> ring index #3 switch port 1, queue 0 -> ring index #8 (4 + 4 * 1) ... instead of using ring index #4. This would cause our ndo_select_queue() to use the fallback queue mechanism which would pick up an incorrect ring for that switch port. Fix this by using the correct switch queue number instead of SYSTEMPORT queue number. Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: bcm_sf2: Configure IMP port for 2Gb/secFlorian Fainelli
With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: sja1105: Don't error out on disabled ports with no phy-modeVladimir Oltean
The sja1105_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: felix: Don't error out on disabled ports with no phy-modeVladimir Oltean
The felix_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: felix: Don't restart PCS SGMII AN if not neededAlex Marginean
Some PHYs like VSC8234 don't like it when AN restarts on their system side and they restart line side AN too, going into an endless link up/down loop. Don't restart PCS AN if link is up already. Although in theory this feedback loop should be possible with the other in-band AN modes too, for some reason it was not seen with the VSC8514 QSGMII and AQR412 USXGMII PHYs. So keep this logic only for SGMII where the problem was found. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: dsa: felix: Set USXGMII link based on BMSR, not LPAAlex Marginean
At least some PHYs (AQR412) don't advertise copper-side link status during system side AN. So remove this duplicate assignment to pcs->link and rely on the previous one for link state: the local indication from the MAC PCS. Fixes: bdeced75b13f ("net: dsa: felix: Add PCS operations for PHYLINK") Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17EDAC/amd64: Do not warn when removing instancesBorislav Petkov
On machines which do not populate all nodes with DIMMs, the driver doesn't initialize an instance there. However, the instance removal remove_one_instance() path will warn unconditionally, which is wrong. Remove the WARN_ON() even if the warning is innocent because it causes a splat in dmesg. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200117115939.5524-1-bp@alien8.de
2020-01-17enetc: Don't print from enetc_sched_speed_set when link goes downVladimir Oltean
It is not an error to unplug a cable from the ENETC port even with TSN offloads, so don't spam the log with link-related messages from the tc-taprio offload subsystem, a single notification is sufficient: [10972.351859] fsl_enetc 0000:00:00.0 eno0: Qbv PSPEED set speed link down. [10972.360241] fsl_enetc 0000:00:00.0 eno0: Link is Down Fixes: 2e47cb415f0a ("enetc: update TSN Qbv PSPEED set according to adjust link speed") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17USB: serial: garmin_gps: Use flexible-array memberGustavo A. R. Silva
Old code in the kernel uses 1-byte and 0-byte arrays to indicate the presence of a "variable length array": struct something { int length; u8 data[1]; }; struct something *instance; instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL); instance->length = size; memcpy(instance->data, source, size); There is also 0-byte arrays. Both cases pose confusion for things like sizeof(), CONFIG_FORTIFY_SOURCE, etc.[1] Instead, the preferred mechanism to declare variable-length types such as the one above is a flexible array member[2] which need to be the last member of a structure and empty-sized: struct something { int stuff; u8 data[]; }; Also, by making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being unadvertenly introduced[3] to the codebase from now on. [1] https://github.com/KSPP/linux/issues/21 [2] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17net: phy: adin: const-ify static dataAlexandru Ardelean
Some bits of static data should have been made const from the start. This change adds the const qualifier where appropriate. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: phy: dp83867: Set FORCE_LINK_GOOD to default after resetMichael Grzeschik
According to the Datasheet this bit should be 0 (Normal operation) in default. With the FORCE_LINK_GOOD bit set, it is not possible to get a link. This patch sets FORCE_LINK_GOOD to the default value after resetting the phy. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17USB: serial: opticon: stop all I/O on close()Johan Hovold
Make sure to stop any submitted write URBs on close(). Note that the tty layer will wait up to 30 seconds for the buffers to drain before close() is called. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17USB: serial: opticon: add chars_in_buffer() implementationJohan Hovold
Add a chars_in_buffer() implementation so that the tty layer will wait for outgoing buffered data to be drained when needed (e.g. on final close()). Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17drivers/net: netdevsim depends on INETHongbo Yao
If CONFIG_INET is not set and CONFIG_NETDEVSIM=y. Building drivers/net/netdevsim/fib.o will get the following error: drivers/net/netdevsim/fib.o: In function `nsim_fib4_rt_hw_flags_set': fib.c:(.text+0x12b): undefined reference to `fib_alias_hw_flags_set' drivers/net/netdevsim/fib.o: In function `nsim_fib4_rt_destroy': fib.c:(.text+0xb11): undefined reference to `free_fib_info' Correct the Kconfig for netdevsim. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 48bb9eb47b270 ("netdevsim: fib: Add dummy implementation for FIB offload") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17Merge tag 'devfreq-next-for-5.6' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for v5.6 from Chanwoo Choi: "1. Update devfreq core - Add new 'name' attribute of sysfs to show the device name : /sys/class/devfreq/devfreqX/name - Make 'trans_stat' sysfs reset by entering zero(0) : echo 0 > /sys/class/devfreq/devfreqX/trans_stat - Add debugfs support with 'devfreq_summary' to show the summary : /sys/kernel/debug/devfreq/devfreq_summary - Change the type of time variable to 64bit to avoid overflows. - Make separate devfreq_stats including the statistics information. - Fix minor coding-style like indentation and kernel-doc warnings. 2. Update devfreq drivers - Add new imx8m-ddrc.c devfreq driver for dynamic scaling of DDR frequency. It changes the DDR frequency by using ARM SMCCC(SMC Calling Convention) interface to control TF-A firmware. - Add COMPILE_TEST dependency for rk3399_dmc.c. - Clean-up code for exynos-bus.c and rk3399_dmc.c without behavior changes 3. Update devfreq-event drivers - Fix excessive stack usage of exynos-ppmu.c and clean-up code of rockchip-dfi.c without behavior changes." * tag 'devfreq-next-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (24 commits) PM / devfreq: Add debugfs support with devfreq_summary file PM / devfreq: exynos: Rename Exynos to lowercase PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event PM / devfreq: exynos-bus: Disable devfreq-event device when fails PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails PM / devfreq: imx8m-ddrc: Remove unused defines PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource PM / devfreq: rk3399_dmc: Add missing of_node_put() PM / devfreq: rockchip-dfi: Add missing of_node_put() PM / devfreq: Fix multiple kernel-doc warnings PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive() PM / devfreq: exynos-bus: Extract exynos_bus_profile_init() PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq) PM / devfreq: Move statistics to separate struct devfreq_stats PM / devfreq: Add clearing transitions stats PM / devfreq: Change time stats to 64-bit PM / devfreq: Add new name attribute for sysfs ...
2020-01-17net: hns: fix soft lockup when there is not enough memoryYonglong Liu
When there is not enough memory and napi_alloc_skb() return NULL, the HNS driver will print error message, and than try again, if the memory is not enough for a while, huge error message and the retry operation will cause soft lockup. When napi_alloc_skb() return NULL because of no memory, we can get a warn_alloc() call trace, so this patch deletes the error message. We already use polling mode to handle irq, but the retry operation will render the polling weight inactive, this patch just return budget when the rx is not completed to avoid dead loop. Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: phy: Maintain MDIO device and bus statisticsFlorian Fainelli
We maintain global statistics for an entire MDIO bus, as well as broken down, per MDIO bus address statistics. Given that it is possible for MDIO devices such as switches to access MDIO bus addresses for which there is not a mdio_device instance created (therefore not a a corresponding device directory in sysfs either), we also maintain per-address statistics under the statistics folder. The layout looks like this: /sys/class/mdio_bus/../statistics/ transfers errrors writes reads transfers_<addr> errors_<addr> writes_<addr> reads_<addr> When a mdio_device instance is registered, a statistics/ folder is created with the tranfers, errors, writes and reads attributes which point to the appropriate MDIO bus statistics structure. Statistics are 64-bit unsigned quantities and maintained through the u64_stats_sync.h helper functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17USB: serial: suppress driver bind attributesJohan Hovold
USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-01-17netdevsim: fix nsim_fib6_rt_create() error pathEric Dumazet
It seems nsim_fib6_rt_create() intent was to return either a valid pointer or an embedded error code. BUG: unable to handle page fault for address: fffffffffffffff4 PGD 9870067 P4D 9870067 PUD 9872067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 22851 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:jhash2 include/linux/jhash.h:125 [inline] RIP: 0010:rhashtable_jhash2+0x76/0x2c0 lib/rhashtable.c:963 Code: b9 00 00 00 00 00 fc ff df 48 c1 e8 03 0f b6 14 08 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 30 02 00 00 49 8d 7e 04 <41> 8b 06 48 be 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 0f b6 RSP: 0018:ffffc90016127190 EFLAGS: 00010246 RAX: 0000000000000007 RBX: 00000000dfb3ab49 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffffffff839ba7c8 RDI: fffffffffffffff8 RBP: ffffc900161271c0 R08: ffff8880951f8640 R09: ffffed1015d0703d R10: ffffed1015d0703c R11: ffff8880ae8381e3 R12: 00000000dfb3ab49 R13: 00000000dfb3ab49 R14: fffffffffffffff4 R15: 0000000000000007 FS: 00007f40bfbc6700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff4 CR3: 0000000093660000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] __rhashtable_insert_fast.constprop.0+0xe15/0x1180 include/linux/rhashtable.h:723 rhashtable_insert_fast include/linux/rhashtable.h:832 [inline] nsim_fib6_rt_add drivers/net/netdevsim/fib.c:603 [inline] nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:658 [inline] nsim_fib6_event drivers/net/netdevsim/fib.c:719 [inline] nsim_fib_event drivers/net/netdevsim/fib.c:744 [inline] nsim_fib_event_nb+0x1b16/0x2600 drivers/net/netdevsim/fib.c:772 notifier_call_chain+0xc2/0x230 kernel/notifier.c:83 __atomic_notifier_call_chain+0xa6/0x1a0 kernel/notifier.c:173 atomic_notifier_call_chain+0x2e/0x40 kernel/notifier.c:183 call_fib_notifiers+0x173/0x2a0 net/core/fib_notifier.c:35 call_fib6_notifiers+0x4b/0x60 net/ipv6/fib6_notifier.c:22 call_fib6_entry_notifiers+0xfb/0x150 net/ipv6/ip6_fib.c:399 fib6_add_rt2node net/ipv6/ip6_fib.c:1216 [inline] fib6_add+0x20cd/0x3ec0 net/ipv6/ip6_fib.c:1471 __ip6_ins_rt+0x54/0x80 net/ipv6/route.c:1315 ip6_ins_rt+0x96/0xd0 net/ipv6/route.c:1325 __ipv6_dev_ac_inc+0x76f/0xb20 net/ipv6/anycast.c:324 ipv6_sock_ac_join+0x4c1/0x790 net/ipv6/anycast.c:139 do_ipv6_setsockopt.isra.0+0x3908/0x4290 net/ipv6/ipv6_sockglue.c:670 ipv6_setsockopt+0xff/0x180 net/ipv6/ipv6_sockglue.c:944 udpv6_setsockopt+0x68/0xb0 net/ipv6/udp.c:1564 sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3149 __sys_setsockopt+0x261/0x4c0 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:2143 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45aff9 Fixes: 48bb9eb47b27 ("netdevsim: fib: Add dummy implementation for FIB offload") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17net: xen-netback: hash.c: Use built-in RCU list checkingMadhuparna Bhowmik
list_for_each_entry_rcu has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik04@gmail.com> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-17gpiolib: Remove duplicated function gpio_do_set_config()YueHaibing
gpio_set_config() simply call gpio_do_set_config(), so remove the duplicated function. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200116142927.58908-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-17Merge tag 'intel-pinctrl-v5.5-3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.5-3 * Fix Interrupt Status register offset for Intel Sunrisepoint PCH-H. The following is an automated git shortlog grouped by driver: sunrisepoint: - Add missing Interrupt Status register offset
2020-01-17Merge branch 'fixup-thunderx-hierarchy' into develLinus Walleij
2020-01-17Merge tag 'v5.5-rc6' into develLinus Walleij
Linux 5.5-rc6
2020-01-17Merge tag 'extcon-next-for-5.6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 5.6 Detailed description for this pull request: 1. Remove unneeded 'extern' keyword from extcon.h header file 2. Clean-up the extcon provider - Clean-up the code for readability of extcon-arizona/sm5502.c * tag 'extcon-next-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: Remove unneeded extern keyword from extcon.h extcon: sm5502: Remove unneeded semicolon extcon: arizona: Factor out microphone and button detection extcon: arizona: Factor out microphone impedance into a function extcon: arizona: Invert logic of check in arizona_hpdet_do_id extcon: arizona: Remove excessive WARN_ON extcon: arizona: Remove unnecessary sets of ACCDET_MODE extcon: arizona: Tidy up transition from mic to headphone detect extcon: arizona: Clear jack status regardless of detection type extcon: arizona: Move pdata extraction to probe extcon: arizona: Make rev A register sequences atomic extcon: arizona: Correct clean up if arizona_identify_headphone fails
2020-01-17Merge tag 'phy-for-5.6_v2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.6 *) Add support in PHY core to create link between PHY consumer and PHY provider *) Add DisplayPort PHY configuration set to be used for negotiating the configurations to be used between DisplayPort controller and DisplayPort PHY *) Add PHY wrapper driver (configure inputs to Cadence Sierra PHY) for TI's J721E SoC and adapt Cadence Sierra PHY driver to be used for J721E SoC (Supports USB and PCIe) *) Add PHY driver for eMMC PHY in Intel LGM SoC *) Add PHY support for 7216 and 7211 Broadcom SoCs which uses the new Synopsys USB Controller *) Add support for 16nm SATA PHY present in Broadcom 7216 SoC *) Fix lost packet issue, fix MDIO from getting inaccessible, fix occasional transaction failures, fix USB driver from crashing in Broadcom USB PHY driver *) Fix missing PCS SW reset in UFS PHY of Qualcomm SM8150 *) Use "struct phy_configure_opts_mipi_dphy" to pass parameters from display controller to rockchip-inno-dsidphy *) Other cleanups including compile testing for some of the PHY drivers, fixing Kconfig indentation, duplicate writes in drivers etc., Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (54 commits) dt-bindings: phy: Add PHY_TYPE_DP definition phy: ti: j721e-wiz: Fix return value check in wiz_probe() dt-bindings: usb: Convert Allwinner A80 USB PHY controller to a schema phy: intel-lgm-emmc: Fix warning by adding missing MODULE_LICENSE phy: ti: j721e-wiz: Manage typec-gpio-dir dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: Sierra: add phy_reset hook phy: cadence: Sierra: remove redundant initialization of pointer regmap phy: Add DisplayPort configuration options phy: Enable compile testing for some of drivers phy: mediatek: Fix Kconfig indentation phy: intel-lgm-emmc: Add support for eMMC PHY dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC dt-bindings: phy: Document WIZ (SERDES wrapper) bindings phy: cadence: Sierra: Use correct dev pointer in cdns_sierra_phy_remove() phy: cadence: Sierra: Set cmn_refclk_dig_div/cmn_refclk1_dig_div frequency to 25MHz phy: cadence: Sierra: Change MAX_LANES of Sierra to 16 phy: cadence: Sierra: Check for PLL lock during PHY power on phy: cadence: Sierra: Get reset control "array" for each link ...
2020-01-17phy: ti: j721e-wiz: Fix return value check in wiz_probe()Wei Yongjun
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-16ata: brcm: fix reset controller API usageArnd Bergmann
While fixing another issue in this driver I noticed it uses IS_ERR_OR_NULL(), which is almost always a mistake. Change the driver to use the proper devm_reset_control_get_optional() interface instead and remove the checks except for the one that checks for a failure in that function. Fixes: 2b2c47d9e1fe ("ata: ahci_brcm: Allow optional reset controller to be used") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-16ata: brcm: mark PM functions as __maybe_unusedArnd Bergmann
The new shutdown callback causes a link failure: drivers/ata/ahci_brcm.c: In function 'brcm_ahci_shutdown': drivers/ata/ahci_brcm.c:552:8: error: implicit declaration of function 'brcm_ahci_suspend'; did you mean 'brcm_ahci_shutdown'? [-Werror=implicit-function-declaration] ret = brcm_ahci_suspend(&pdev->dev); ^~~~~~~~~~~~~~~~~ Remove the incorrect #ifdef and use __maybe_unused annotations instead to make this more robust. Fixes: 7de9b1688c1d ("ata: ahci_brcm: Add a shutdown callback") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-16Input: keyspan-remote - fix control-message timeoutsJohan Hovold
The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus. The USB upper limit of five seconds per request should be more than enough. Fixes: 99f83c9c9ac9 ("[PATCH] USB: add driver for Keyspan Digital Remote") Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> # 2.6.13 Link: https://lore.kernel.org/r/20200113171715.30621-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-14 08:34:23 +0000