summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-07net: dsa: felix: tc-taprio intervals smaller than MTU should send at least ↵Vladimir Oltean
one packet The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xxPali Rohár
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-07iommu/amd: use full 64-bit value in build_completion_wait()John Sperbeck
We started using a 64 bit completion value. Unfortunately, we only stored the low 32-bits, so a very large completion value would never be matched in iommu_completion_wait(). Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore") Signed-off-by: John Sperbeck <jsperbeck@google.com> Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-09-07RDMA/irdma: Report RNR NAK generation in device capsSindhu-Devale
Report RNR NAK generation when device capabilities are queried Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20220906223244.1119-6-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07RDMA/irdma: Use s/g array in post send only when its validSindhu-Devale
Send with invalidate verb call can pass in an uninitialized s/g array with 0 sge's which is filled into irdma WQE and causes a HW asynchronous event. Fix this by using the s/g array in irdma post send only when its valid. Fixes: 551c46e ("RDMA/irdma: Add user/kernel shared libraries") Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20220906223244.1119-5-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07RDMA/irdma: Return correct WC error for bind operation failureSindhu-Devale
When a QP and a MR on a local host are in different PDs, the HW generates an asynchronous event (AE). The same AE is generated when a QP and a MW are in different PDs during a bind operation. Return the more appropriate IBV_WC_MW_BIND_ERR for the latter case by checking the OP type from the CQE in error. Fixes: 551c46edc769 ("RDMA/irdma: Add user/kernel shared libraries") Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20220906223244.1119-4-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07RDMA/irdma: Return error on MR deregister CQP failureSindhu-Devale
The MR deregister CQP can fail if an MW is bound to it. Return an appropriate error for this case. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20220906223244.1119-3-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07RDMA/irdma: Report the correct max cqes from query deviceSindhu-Devale
Report the correct max cqes available to an application taking into account a reserved entry to detect overflow. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20220906223244.1119-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-07Merge tag 'phy-fixes-6.0' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus Vinod writes: "phy: fixes for 6.0 Fix for broken reset in marvell a3700-comphy" * tag 'phy-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
2022-09-07wifi: iwlwifi: don't spam logs with NSS>2 messagesJason A. Donenfeld
I get a log line like this every 4 seconds when connected to my AP: [15650.221468] iwlwifi 0000:09:00.0: Got NSS = 4 - trimming to 2 Looking at the code, this seems to be related to a hardware limitation, and there's nothing to be done. In an effort to keep my dmesg manageable, downgrade this error to "debug" rather than "info". Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220905172246.105383-1-Jason@zx2c4.com
2022-09-07efi/x86: libstub: remove unused variablechen zhang
The variable "has_system_memory" is unused in function ‘adjust_memory_range_protection’, remove it. Signed-off-by: chen zhang <chenzhang@kylinos.cn> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-07nvme: requeue aen after firmware activationKeith Busch
The driver prevents async event work while handling a processing paused event, but someone needs to restart it after the controller returns to a live state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400 Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-07nvmet: fix mar and mor off-by-one errorsDennis Maisenbacher
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's based vales where a value of 0xffffffff indicates that there is no limit. Decrement the values that are returned by bdev_max_open_zones and bdev_max_active_zones as the block layer helpers are not 0's based. A 0 returned by the block layer helpers indicates no limit, thus convert it to 0xffffffff (U32_MAX). Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support") Suggested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-06scsi: mpt3sas: Fix use-after-free warningSreekanth Reddy
Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fix from Russell King: "Just one fix for now for the AMBA bus code from Isaac Manjarres" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9229/1: amba: Fix use-after-free in amba_read_periphid()
2022-09-06drm/i915: consider HAS_FLAT_CCS() in needs_ccs_pagesMatthew Auld
Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on DG1, even though it doesn't have small-BAR or flat-CCS. References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605 Fixes: efeb3caf4341 ("drm/i915/ttm: disallow CPU fallback mode for ccs pages") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com (cherry picked from commit 873fef8833ea794526b7f4179088e565078fe0e8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06drm/i915: Implement WaEdpLinkRateDataReloadVille Syrjälä
A lot of modern laptops use the Parade PS8461E MUX for eDP switching. The MUX can operate in jitter cleaning mode or redriver mode, the first one resulting in higher link quality. The jitter cleaning mode needs to know the link rate used and the MUX achieves this by snooping the LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES DPCD accesses. When the MUX is powered down (seems this can happen whenever the display is turned off) it loses track of the snooped link rates so when we do the LINK_RATE_SELECT write it no longer knowns which link rate we're selecting, and thus it falls back to the lower quality redriver mode. This results in unstable high link rates (eg. usually 8.1Gbps link rate no longer works correctly). In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES from the sink at the start of every link training. Unfortunately we don't have a way to detect the presence of the MUX. It looks like the set of laptops equipped with this MUX is fairly large and contains devices from multiple manufacturers. It may also still be growing with new models. So a quirk doesn't seem like a very easily maintainable option, thus we shall attempt to do this unconditionally on all machines that use LINK_RATE_SELECT. Hopefully this extra DPCD read doesn't cause issues for any unaffected machine. If that turns out to be the case we'll need to convert this into a quirk in the future. Cc: stable@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.com Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 25899c590cb5ba9b9f284c6ca8e7e9086793d641) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPCRodrigo Vivi
We need to inform PCODE of a desired ring frequencies so PCODE update the memory frequencies to us. rps->min_freq and rps->max_freq are the frequencies used in that request. However they were unset when SLPC was enabled and PCODE never updated the memory freq. v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right frequencies from the get_ia_constants instead of the fake init of rps' min and max. v3: don't forget the max <= min return v4: Move all the freq conversion to intel_rps.c. And the max <= min check to where it belongs. v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining the "raw format" Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled") Cc: <stable@vger.kernel.org> # v5.15+ Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com (cherry picked from commit 018a7bdbb090b9155a6509a0d1a684db4afaa5b1) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06drm/i915/bios: Copy the whole MIPI sequence blockVille Syrjälä
Turns out the MIPI sequence block version number and new block size fields are considered part of the block header and are not included in the reported new block size field itself. Bump up the block size appropriately so that we'll copy over the last five bytes of the block as well. For this particular machine those last five bytes included parts of the GPIO op for the backlight on sequence, causing the backlight no longer to turn back on: Sequence 6 - MIPI_SEQ_BACKLIGHT_ON Delay: 20000 us - GPIO index 0, number 0, set 0 (0x00) + GPIO index 1, number 70, set 1 (0x01) Cc: stable@vger.kernel.org Fixes: e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit a06289f3f72431f3777af95ea1226b5b0abdc426) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-09-06net: usb: qmi_wwan: add Quectel RM520Njerry.meng
add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06drm/ttm: update bulk move object of ghost BOZhenGuo Yin
[Why] Ghost BO is released with non-empty bulk move object. There is a warning trace: WARNING: CPU: 19 PID: 1582 at ttm/ttm_bo.c:366 ttm_bo_release+0x2e1/0x2f0 [amdttm] Call Trace: amddma_resv_reserve_fences+0x10d/0x1f0 [amdkcl] amdttm_bo_put+0x28/0x30 [amdttm] amdttm_bo_move_accel_cleanup+0x126/0x200 [amdttm] amdgpu_bo_move+0x1a8/0x770 [amdgpu] ttm_bo_handle_move_mem+0xb0/0x140 [amdttm] amdttm_bo_validate+0xbf/0x100 [amdttm] [How] The resource of ghost BO should be moved to LRU directly, instead of using bulk move. The bulk move object of ghost BO should set to NULL before function ttm_bo_move_to_lru_tail_unlocked. v2: set bulk move to NULL manually if no resource associated with ghost BO Fixed: 5b951e487fd6bf5f ("drm/ttm: fix bulk move handling v2") Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220906084619.2545456-1-zhenguo.yin@amd.com
2022-09-06net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_dataChristian Marangi
of_device_get_match_data is called on priv->dev before priv->dev is actually set. Move of_device_get_match_data after priv->dev is correctly set to fix this kernel panic. Fixes: 3bb0844e7bcd ("net: dsa: qca8k: cache match data to speed up access") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220904215319.13070-1-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-06nvme-tcp: fix regression that causes sporadic requests to time outSagi Grimberg
When we queue requests, we strive to batch as much as possible and also signal the network stack that more data is about to be sent over a socket with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued as well as queue->more_requests that is derived from the block layer last-in-batch indication. We set more_request=true when we flush the request directly from .queue_rq submission context (in nvme_tcp_send_all), however this is wrongly assuming that no other requests may be queued during the execution of nvme_tcp_send_all. Due to this, a race condition may happen where: 1. request X is queued as !last-in-batch 2. request X submission context calls nvme_tcp_send_all directly 3. nvme_tcp_send_all is preempted and schedules to a different cpu 4. request Y is queued as last-in-batch 5. nvme_tcp_send_all context sends request X+Y, however signals for both MSG_SENDPAGE_NOTLAST because queue->more_requests=true. ==> none of the requests is pushed down to the wire as the network stack is waiting for more data, both requests timeout. To fix this, we eliminate queue->more_requests and only rely on the queue req_list and send_list to be not-empty. Fixes: 122e5b9f3d37 ("nvme-tcp: optimize network stack with setting msg flags according to batch size") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-06nvme-tcp: fix UAF when detecting digest errorsSagi Grimberg
We should also bail from the io_work loop when we set rd_enabled to true, so we don't attempt to read data from the socket when the TCP stream is already out-of-sync or corrupted. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-05hwmon: (tps23861) fix byte order in resistance registerAlexandru Gagniuc
The tps23861 registers are little-endian, and regmap_read_bulk() does not do byte order conversion. On BE machines, the bytes were swapped, and the interpretation of the resistance value was incorrect. To make it work on both big and little-endian machines, use le16_to_cpu() to convert the resitance register to host byte order. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Fixes: fff7b8ab22554 ("hwmon: add Texas Instruments TPS23861 driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220905142806.110598-1-mr.nuke.me@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-09-05Merge tag 'soc-fixes-6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are the expected fixes for the SoC tree. I have let the patches pile up a little too long, so this is bigger than I would have liked. - Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as TEE firmware - Updates to the MAINTAINERS file for the PolarFire SoC - Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno platforms - A fix for a missing dependnecy in the NXP DPIO driver - Broadcom BCA fixes to the newly added devicetree files - Multiple fixes for Microchip AT91 based SoCs, dealing with self-refresh timings and regulator settings in DT - Several DT fixes for NXP i.MX platforms, dealing with incorrect GPIO settings, extraneous nodes, and a wrong clock setting" * tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits) soc: fsl: select FSL_GUTS driver for DPIO ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time ARM: dts: at91: sama7g5ek: specify proper regulator output ranges ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh ARM: at91: pm: fix self-refresh for sama7g5 soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B ARM: ixp4xx: fix typos in comments arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number tee: fix compiler warning in tee_shm_register() arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM arm64: dts: imx8mm-venice-gw7901: fix port/phy validation arm64: dts: verdin-imx8mm: add otg2 pd to usbphy soc: imx: gpcv2: Assert reset before ungating clock arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x ...
2022-09-05Drivers: hv: Never allocate anything besides framebuffer from framebuffer ↵Vitaly Kuznetsov
memory region Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-05Drivers: hv: Always reserve framebuffer region for Gen1 VMsVitaly Kuznetsov
vmbus_reserve_fb() tries reserving framebuffer region iff 'screen_info.lfb_base' is set. Gen2 VMs seem to have it set by EFI and/or by the kernel EFI FB driver (or, in some edge cases like kexec, the address where the buffer was moved, see https://lore.kernel.org/all/20201014092429.1415040-1-kasong@redhat.com/) but on Gen1 VM it depends on bootloader behavior. With grub, it depends on 'gfxpayload=' setting but in some cases it is observed to be zero. That being said, relying on 'screen_info.lfb_base' to reserve framebuffer region is risky. For Gen1 VMs, it should always be possible to get the address from the dedicated PCI device instead. Check for legacy PCI video device presence and reserve the whole region for framebuffer on Gen1 VMs. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-3-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-05PCI: Move PCI_VENDOR_ID_MICROSOFT/PCI_DEVICE_ID_HYPERV_VIDEO definitions to ↵Vitaly Kuznetsov
pci_ids.h There are already three places in kernel which define PCI_VENDOR_ID_MICROSOFT and two for PCI_DEVICE_ID_HYPERV_VIDEO and there's a need to use these from core VMBus code. Move the defines where they belong. No functional change. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-2-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-05Drivers: hv: remove duplicate word in a commentShaomin Deng
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220904154808.26022-1-dengshaomin@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-09-05stmmac: intel: Simplify intel_eth_pci_remove()Christophe JAILLET
There is no point to call pcim_iounmap_regions() in the remove function, this frees a managed resource that would be release by the framework anyway. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up to be much simpler logic and only create the root debugfs directory once when the driver is first accessed. That resolves the memory leak and makes things more obvious as to what the intent is. Cc: Marcin Wojtas <mw@semihalf.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05nvmet: fix a use-after-freeBart Van Assche
Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 Cc: stable@vger.kernel.org Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-09-05RDMA/mlx5: Fix UMR cleanup on error flow of driver initMaor Gottlieb
The cited commit removed from the cleanup flow of umr the checks if the resources were created. This could lead to null-ptr-deref in case that we had failure in mlx5_ib_stage_ib_reg_init stage. Fix it by adding new state to the umr that can say if the resources were created or not and check it in the umr cleanup flow before destroying the resources. Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c") Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/4cfa61386cf202e9ce330e8d228ce3b25a36326e.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05RDMA/mlx5: Set local port to one when accessing countersChris Mi
When accessing Ports Performance Counters Register (PPCNT), local port must be one if it is Function-Per-Port HCA that HCA_CAP.num_ports is 1. The offending patch can change the local port to other values when accessing PPCNT after enabling switchdev mode. The following syndrome will be printed: # cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/* # dmesg mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585) Fix it by setting local port to one for Function-Per-Port HCA. Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Chris Mi <cmi@nvidia.com> Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05RDMA/mlx5: Rely on RoCE fw cap instead of devlink when setting profileMaher Sanalla
When the RDMA auxiliary driver probes, it sets its profile based on devlink driverinit value. The latter might not be in sync with FW yet (In case devlink reload is not performed), thus causing a mismatch between RDMA driver and FW. This results in the following FW syndrome when the RDMA driver tries to adjust RoCE state, which fails the probe: "0xC1F678 | modify_nic_vport_context: roce_en set on a vport that doesn't support roce" To prevent this, select the PF profile based on FW RoCE capability instead of relying on devlink driverinit value. To provide backward compatibility of the RoCE disable feature, on older FW's where roce_rw is not set (FW RoCE capability is read-only), keep the current behavior e.g., rely on devlink driverinit value. Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level") Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Link: https://lore.kernel.org/r/cb34ce9a1df4a24c135cb804db87f7d2418bd6cc.1661763459.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05IB/core: Fix a nested dead lock as part of ODP flowYishai Hadas
Fix a nested dead lock as part of ODP flow by using mmput_async(). From the below call trace [1] can see that calling mmput() once we have the umem_odp->umem_mutex locked as required by ib_umem_odp_map_dma_and_lock() might trigger in the same task the exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which may dead lock when trying to lock the same mutex. Moving to use mmput_async() will solve the problem as the above exit_mmap() flow will be called in other task and will be executed once the lock will be available. [1] [64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid: 2 flags:0x00004000 [64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] [64843.077719] Call Trace: [64843.077722] <TASK> [64843.077724] __schedule+0x23d/0x590 [64843.077729] schedule+0x4e/0xb0 [64843.077735] schedule_preempt_disabled+0xe/0x10 [64843.077740] __mutex_lock.constprop.0+0x263/0x490 [64843.077747] __mutex_lock_slowpath+0x13/0x20 [64843.077752] mutex_lock+0x34/0x40 [64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib] [64843.077808] __mmu_notifier_release+0x1a4/0x200 [64843.077816] exit_mmap+0x1bc/0x200 [64843.077822] ? walk_page_range+0x9c/0x120 [64843.077828] ? __cond_resched+0x1a/0x50 [64843.077833] ? mutex_lock+0x13/0x40 [64843.077839] ? uprobe_clear_state+0xac/0x120 [64843.077860] mmput+0x5f/0x140 [64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core] [64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib] [64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib] [64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560 [mlx5_ib] [64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib] [64843.078051] process_one_work+0x22b/0x3d0 [64843.078059] worker_thread+0x53/0x410 [64843.078065] ? process_one_work+0x3d0/0x3d0 [64843.078073] kthread+0x12a/0x150 [64843.078079] ? set_kthread_struct+0x50/0x50 [64843.078085] ret_from_fork+0x22/0x30 [64843.078093] </TASK> Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-05USB: core: Fix RST error in hub.cAlan Stern
A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: <stable@vger.kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05driver core: fix driver_set_override() issue with empty stringsGreg Kroah-Hartman
Python likes to send an empty string for some sysfs files, including the driver_override field. When commit 23d99baf9d72 ("PCI: Use driver_set_override() instead of open-coding") moved the PCI core to use the driver core function instead of hand-rolling their own handler, this showed up as a regression from some userspace tools, like DPDK. Fix this up by actually looking at the length of the string first instead of trusting that userspace got it correct. Fixes: 23d99baf9d72 ("PCI: Use driver_set_override() instead of open-coding") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable <stable@kernel.org> Reported-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Huisong Li <lihuisong@huawei.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220901163734.3583106-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05bonding: accept unsolicited NA messageHangbin Liu
The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05bonding: use unspecified address if no available link local addressHangbin Liu
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get available source address and send IPv6 neighbor solicit message. If the target is global address, ipv6_dev_get_saddr() will get any available src address. But if the target is link local address, ipv6_dev_get_saddr() will only get available address from our interface, i.e. the corresponding bond interface. But before bond interface up, all the address is tentative, while ipv6_dev_get_saddr() will ignore tentative address. This makes we can't find available link local src address, then bond_ns_send() will not be called and no NS message was sent. Finally bond interface will keep in down state. Fix this by sending NS with unspecified address if there is no available source address. Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warningShravya Kumbham
Typecast the flags variable with (enum dma_ctrl_flags) in zynqmp_dma_prep_memcpy function to fix the coverity warning. Addresses-Coverity: Event mixed_enum_type. Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1653378553-28548-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-05dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get()Liang He
We should call of_node_put() for the reference returned by of_parse_phandle() in fail path or when it is not used anymore. Here we only need to move the of_node_put() before the check. Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users") Signed-off-by: Liang He <windhl@126.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220720073234.1255474-1-windhl@126.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "s390: - PCI interpretation compile fixes RISC-V: - fix unused variable warnings in vcpu_timer.c - move extern sbi_ext declarations to a header x86: - check validity of argument to KVM_SET_MP_STATE - use guest's global_ctrl to completely disable guest PEBS - fix a memory leak on memory allocation failure - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES - fix build failure with Clang integrated assembler - fix MSR interception - always flush TLBs when enabling dirty logging" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: check validity of argument to KVM_SET_MP_STATE perf/x86/core: Completely disable guest PEBS via guest's global_ctrl KVM: x86: fix memoryleak in kvm_arch_vcpu_create() KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES KVM: s390: pci: Hook to access KVM lowlevel from VFIO riscv: kvm: move extern sbi_ext declarations to a header riscv: kvm: vcpu_timer: fix unused variable warnings KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE() KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() kvm: x86: mmu: Always flush TLBs when enabling dirty logging kvm: x86: mmu: Drop the need_remote_flush() function
2022-09-04dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API ↵Swati Agarwal
failure The driver does not handle the failure case while calling dma_set_mask_and_coherent API. In case of failure, capture the return value of API and then report an error. Addresses-coverity: Unchecked return value (CHECKED_RETURN) Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores propertySwati Agarwal
Free the allocated resources for missing xlnx,num-fstores property. Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handlingSwati Agarwal
Add missing cleanup in devm_platform_ioremap_resource(). When probe fails remove dma channel resources and disable clocks in accordance with the order of resources allocated . Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com> Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-04Merge tag 'wireless-2022-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes berg says: ==================== We have a handful of fixes: - fix DMA from stack in wilc1000 driver - fix crash on chip reset failure in mt7921e - fix for the reported warning on aggregation timer expiry - check packet lengths in hwsim virtio paths - fix compiler warnings/errors with AAD construction by using struct_group - fix Intel 4965 driver rate scale operation - release channel contexts correctly in mac80211 mlme code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-04RDMA/siw: Pass a pointer to virt_to_page()Linus Walleij
Functions that work on a pointer to virtual memory such as virt_to_pfn() and users of that function such as virt_to_page() are supposed to pass a pointer to virtual memory, ideally a (void *) or other pointer. However since many architectures implement virt_to_pfn() as a macro, this function becomes polymorphic and accepts both a (unsigned long) and a (void *). If we instead implement a proper virt_to_pfn(void *addr) function the following happens (occurred on arch/arm): drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int') to parameter of type 'const void *' [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument 1 of 'virt_to_pfn' makes pointer from integer without a cast [-Wint-conversion] drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible integer to pointer conversion passing 'unsigned long long' to parameter of type 'const void *' [-Wint-conversion] Fix this with an explicit cast. In one case where the SIW SGE uses an unaligned u64 we need a double cast modifying the virtual address (va) to a platform-specific uintptr_t before casting to a (void *). Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Cc: linux-rdma@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-09-03Merge tag 'gpio-fixes-for-v6.0-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A a set of fixes from the GPIO subsystem. Most are small driver fixes except the realtek-otto driver patch which is pretty big but addresses a significant flaw that can cause the CPU to stay infinitely busy on uncleared ISR on some platforms. Summary: - MAINTAINERS update - fix resource leaks in gpio-mockup and gpio-pxa - add missing locking in gpio-pca953x - use 32-bit I/O in gpio-realtek-otto - make irq_chip structures immutable in four more drivers" * tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ws16c48: Make irq_chip immutable gpio: 104-idio-16: Make irq_chip immutable gpio: 104-idi-48: Make irq_chip immutable gpio: 104-dio-48e: Make irq_chip immutable gpio: realtek-otto: switch to 32-bit I/O gpio: pca953x: Add mutex_lock for regcache sync in PM gpio: mockup: remove gpio debugfs when remove device gpio: pxa: use devres for the clock struct MAINTAINERS: rectify entry for XILINX GPIO DRIVER
generated by cgit (git 2.34.1) at 2025-09-12 07:39:01 +0000