summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-22serial: stm32: correct flow control property spellingAlexandre TORGUE
"st,hw-flow-ctrl" property is documented in device tree binding whereas "auto-flow-control" was used in the code. The driver is now aligned with the binding name "st,hw-flow-ctrl". Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: disable tx and rx during shutdownAlexandre TORGUE
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: header file creationAlexandre TORGUE
Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: stm32: adding support for stm32f7Alexandre TORGUE
Register offset management rework to support both stm32f4 (default) and stm32f7. Driver rework to ensure same functional level on both stm32f4 and stm32f7: no new feature in this version yet. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty: serial: xuartps: Wait for rx and tx reset done statusNava kishore Manne
After issuing the reset, driver is not checking the rx and tx reset done status. So, modified driver to wait for the reset done status. Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: xuartps: Adds RXBS register support for zynqmpNava kishore Manne
This patch adds RXBS register access support for zynqmp. To avoid the corner error conditions it will consider only RXBS[2:0] bits while checking the error conditions (Parity,Framing and BRAK). Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty/serial/8250: Touch NMI watchdog in wait_for_xmitrJiri Olsa
First loop in wait_for_xmitr could also trigger NMI watchdog in case reading from the port is slow: PID: 0 TASK: ffffffff819c1460 CPU: 0 COMMAND: "swapper/0" #0 [ffff88019f405e58] crash_nmi_callback at ffffffff8104d382 #1 [ffff88019f405e68] nmi_handle at ffffffff8168ead9 #2 [ffff88019f405eb0] do_nmi at ffffffff8168ec53 #3 [ffff88019f405ef0] end_repeat_nmi at ffffffff8168df13 [exception RIP: delay_tsc+50] RIP: ffffffff81325642 RSP: ffff88019f403bb0 RFLAGS: 00000083 RAX: 00000000000005c8 RBX: ffffffff81f83000 RCX: 0000024e4fb88a8b RDX: 0000024e4fb89053 RSI: 0000000000000000 RDI: 00000000000007d1 RBP: ffff88019f403bb0 R8: 000000000000000a R9: 0000000000000000 R10: 0000000000000000 R11: ffff88019f403ad6 R12: 000000000000250f R13: 0000000000000020 R14: ffffffff81d360c7 R15: 0000000000000047 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #4 [ffff88019f403bb0] delay_tsc at ffffffff81325642 #5 [ffff88019f403bb8] __const_udelay at ffffffff813255a8 #6 [ffff88019f403bc8] wait_for_xmitr at ffffffff81404390 #7 [ffff88019f403bf0] serial8250_console_putchar at ffffffff8140455c #8 [ffff88019f403c10] uart_console_write at ffffffff813ff00a #9 [ffff88019f403c40] serial8250_console_write at ffffffff814044ae #10 [ffff88019f403c88] call_console_drivers.constprop.15 at ffffffff81086b01 #11 [ffff88019f403cb0] console_unlock at ffffffff8108842f #12 [ffff88019f403ce8] vprintk_emit at ffffffff81088834 #13 [ffff88019f403d58] vprintk_default at ffffffff81088ba9 #14 [ffff88019f403d68] printk at ffffffff8167f034 Adding touch_nmi_watchdog call to the first loop as well. Reported-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: 8250_pci: Use symbolic constants for EXAR's MPIO registersJan Kiszka
Less magic that only requires comments. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22tty: amba-pl011: uart_amba_port is not available with earlycon functionShawn Guo
Commit 0e125a5facf8 ("tty: amba-pl011: define flag register bits for ZTE device") changes earlycon function pl011_putc() to use a pointer to uart_amba_port. This causes a regression when earlycon is enabled, because uart_amba_port is not available yet at earlycon time. Let's revert the change on pl011_putc() to fix the regression. The earlycon support for ZTE device can probably be added later by declaring a new earlycon setup function with a vendor specific compatible. Reported-by: Sudeep Holla <sudeep.holla@arm.com> Fixes: 0e125a5facf8 ("tty: amba-pl011: define flag register bits for ZTE device") Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22serial: mxs-auart: Fix missing clk_disable_unprepare() on error in ↵Wei Yongjun
mxs_get_clks() Commit 5d7519dfc963 ("serial: mxs-auart: Disable clock on error path") try to disable clock on error path, but still missing the clk_set_rate() error handling path. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Emulate \e[100-107m (bright background colors).Adam Borowski
For now, these fall back to regular (dark) colors. It'd be tempting to replace blink with bright backgrounds, as permitted by CGA/VGA -- we already muck with the other programmable bit (foreground brightness vs 512 character font). This would bring vgacon in line with fbcon, which doesn't support blink anywhere but on some drivers renders that bit as bright background. If that is done, this commit should be amended to be one of ways of setting that bit. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Support \e[90-97m (bright foreground colors).Adam Borowski
These codes are supported by all major terminals, thus they occasionally see some use despite being redundant with \e[38;5;(x+8)m or (less exactly) \e[1;3(x)m. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Drop a no longer true comment.Adam Borowski
Some guy went on a patching spree, adding 24-bit colour support all around: https://gist.github.com/XVilka/8346728 Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Make a comparison <= for readability.Adam Borowski
All other uses of vc_npar are inclusive (save for < NPAR) which raises eyebrows, so let's at least do so consistently. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22vt: Fix a read-past-array in vc_t416_color().Adam Borowski
This makes it show up on UBSAN: perl -e 'for (0..15) {my @x=("0")x$_;push @x,qw(38 2 64 128 192 4);printf "\e[%smAfter %d zeroes.\e[0m\n", join(";",@x[0..($_+5<15?$_+5:15)]), $_}' Seems harmless: if you can programmatically read attributes of a vt character (/dev/vcsa*), multiple probes can obtain parts of vt_mode then lowest byte (5th on 64-bit big-endian) of a pointer. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22Merge branch 'linus' into x86/platform, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22can: dev: fix deadlock reported after bus-offSergei Miroshnichenko
A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24 Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-22mmc: dw_mmc: fix the spamming log messageJaehoon Chung
When there is no Card which is set to "broken-cd", it's displayed a clock information continuously. Because it's polling for detecting card. This patch is fixed this problem. Fixes: 65257a0deed5 ("mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus()") Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-22drm/nouveau: Revert "bus: remove cpu_coherent flag"Karol Herbst
This reverts commit aff51175cdbf345740ec9203eff88e772af88059. The commit caused fence timeouts within nvc0_screen_destroy and most likely other places as well. The most obvious effect is, that userspace processes take minutes to actually quit. Signed-off-by: Karol Herbst <karolherbst@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-09-22drm/nouveau/fifo/nv04: avoid ramht race against cookie insertionIlia Mirkin
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-09-22net/faraday: Mask out PHYSTS_CHG interruptJoel Stanley
The PHYSTS_CHG (the ftgmac100's PHY IRQ) is telling the system to go look at the PHY registers for a link status change. The interrupt was causing issues on Aspeed SoC where some board designs had an active high configuration, some active low, and in some cases repurposed for other functions. When misconfigured Linux would chew 100% of CPU cycles servicing interrupts: [ 20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG [ 20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG [ 20.280000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG [ 20.300000] ftgmac100 1e660000.ethernet eth0: [ISR] = 0x200: PHYSTS_CHG While in the ftgmac100 IP can be configured for high, low and edge sensitivity the current driver always polls the PHY, so we chose to mask out the interrupt. See https://patchwork.ozlabs.org/patch/672099/ for more discussion. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/faraday: Configure old MDIO interface on Aspeed SoCsJoel Stanley
The Aspeed SoCs have a new MDIO interface as an option in the G4 and G5 SoCs. The old one is still available, so select it in order to remain compatible with the ftgmac100 driver. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/faraday: Clear stale interruptsGavin Shan
There is stale interrupt (PHYSTS_CHG in ISR, bit#6 in 0x0) from the bootloader (uboot) when enabling the MAC. The stale interrupts aren't part of kernel and should be cleared. This clears the stale interrupts in ISR (0x0) when enabling the MAC. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/faraday: Adapt for Aspeed SoCsJoel Stanley
The RXDES and TXDES registers bits in the ftgmac100 indicates EDO{R,T}R at bit position 15 for the Faraday Tech IP. However, the version of this IP present in the Aspeed SoCs has these bits at position 30 in the registers. It appers that ast2400 SoCs support both positions, with the 15th bit marked as reserved but still functional. In the ast2500 this bit is reused for another function, so we need a work around. This was confirmed with engineers from Aspeed that using bit 30 is correct for both the ast2400 and ast2500 SoCs. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/faraday: Make EDO{R,T}R bits configurableAndrew Jeffery
These bits are #defined at a fixed location. In order to support future hardware that has chosen to move these bits around move the bits into a member of the struct ftgmac100. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/faraday: Separate rx page storage from rxdescAndrew Jeffery
The ftgmac100 hardware revision in e.g. the Aspeed AST2500 no longer reserves all bits in RXDES#2 but instead uses the bottom 16 bits to store MAC frame metadata. Avoid corruption by shifting struct page pointers out to their own member in struct ftgmac100. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: Convert to use simple_open()Wei Yongjun
Remove an open coded simple_open() function and replace file operations references to the function with simple_open() instead. Generated by: scripts/coccinelle/api/simple_open.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: dsa: qca8k: use mdio_module_driver to simplify the codeWei Yongjun
mdio_module_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: dsa: qca8k: fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/dsa/qca8k.c:259:22: warning: symbol 'qca8k_regmap_config' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: XDP TX xmit moreSaeed Mahameed
Previously we rang XDP SQ doorbell on every forwarded XDP packet. Here we introduce a xmit more like mechanism that will queue up more than one packet into SQ (up to RX napi budget) w/o notifying the hardware. Once RX napi budget is consumed and we exit napi RX loop, we will flush (doorbell) all XDP looped packets in case there are such. XDP forward packet rate: Comparing XDP with and w/o xmit more (bulk transmit): RX Cores XDP TX XDP TX (xmit more) --------------------------------------------------- 1 6.5Mpps 12.4Mpps 2 13.2Mpps 24.2Mpps 4 25.2Mpps 36.3Mpps* 8 36.3Mpps* 36.3Mpps* *My xmitter was limited to 36.3Mpps, so it is the bottleneck. It seems that receive side can handle more. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: XDP TX forwarding supportSaeed Mahameed
Adding support for XDP_TX forwarding from xdp program. Using XDP, now user can loop packets out of the same port. We create a dedicated TX SQ for each channel that will serve XDP programs that return XDP_TX action to loop packets back to the wire directly from the channel RQ RX path. For that RX pages will now need to be mapped bi-directionally, and on XDP_TX action we will sync the page back to device then queue it into SQ for transmission. The XDP xmit frame function will report back to the RX path if the page was consumed (transmitted), if so, RX path will forget about that page as if it were released to the stack. Later on, on XDP TX completion, the page will be released back to the page cache. For simplicity this patch will hit a doorbell on every XDP TX packet. Next patch will introduce a xmit more like mechanism that will queue up more than one packet into SQ w/o notifying the hardware, once RX napi loop is done we will hit doorbell once for all XDP TX packets form the previous loop. This should drastically improve XDP TX performance. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: Have a clear separation between different SQ typesSaeed Mahameed
Make a clear separate between Regular SQ (TXQ) and ICO SQ creation, destruction and union their mutual information structures. Don't allocate redundant TXQ skb/wqe_info/dma_fifo arrays for ICO SQ. And have a different SQ edge for ICO SQ than TXQ SQ, to be more accurate. In preparation for XDP TX support. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: XDP fast RX drop bpf programs supportRana Shahout
Add support for the BPF_PROG_TYPE_PHYS_DEV hook in mlx5e driver. When XDP is on we make sure to change channels RQs type to MLX5_WQ_TYPE_LINKED_LIST rather than "striding RQ" type to ensure "page per packet". On XDP set, we fail if HW LRO is set and request from user to turn it off. Since on ConnectX4-LX HW LRO is always on by default, this will be annoying, but we prefer not to enforce LRO off from XDP set function. Full channels reset (close/open) is required only when setting XDP on/off. When XDP set is called just to exchange programs, we will update each RQ xdp program on the fly and for synchronization with current data path RX activity of that RQ, we temporally disable that RQ and ensure RX path is not running, quickly update and re-enable that RQ, for that we do: - rq.state = disabled - napi_synnchronize - xchg(rq->xdp_prg) - rq.state = enabled - napi_schedule // Just in case we've missed an IRQ Packet rate performance testing was done with pktgen 64B packets and on TX side and, TC drop action on RX side compared to XDP fast drop. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Comparison is done between: 1. Baseline, Before this patch with TC drop action 2. This patch with TC drop action 3. This patch with XDP RX fast drop RX Cores Baseline(TC drop) TC drop XDP fast Drop -------------------------------------------------------------- 1 5.3Mpps 5.3Mpps 16.5Mpps 2 10.2Mpps 10.2Mpps 31.3Mpps 4 20.5Mpps 19.9Mpps 36.3Mpps* *My xmitter was limited to 36.3Mpps, so it is the bottleneck. It seems that receive side can handle more. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: Dynamic RQ type infrastructureSaeed Mahameed
Add two helper functions to allow dynamic changes of RQ type. mlx5e_set_rq_priv_params and mlx5e_set_rq_type_params will be used on netdev creation to determine the default RQ type. This will be needed later for downstream patches of XDP support. When enabling XDP we will dynamically move from striding RQ to linked list RQ type. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: Slightly reduce hardware LRO sizeSaeed Mahameed
Before this patch LRO size was 64K, now with build_skb requires extra room, headroom + sizeof(skb_shared_info) added to the data buffer will make wqe size or page_frag_size slightly larger than 64K which will demand order 5 page instead of order 4 in 4K page systems. We take those extra bytes from hardware LRO data size in order to not increase the required page order for when hardware LRO is enabled. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: Union RQ RX info per RQ typeSaeed Mahameed
We have two types of RX RQs, and they use two separate sets of info arrays and structures in RX data path function. Today those structures are mutually exclusive per RQ type, hence one kind is allocated on RQ creation according to the RQ type. For better cache locality and to minimalize the sizeof(struct mlx5e_rq), in this patch we define them as a union. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx5e: Build RX SKB on demandSaeed Mahameed
For non-striding RQ configuration before this patch we had a ring with pre-allocated SKBs and mapped the SKB->data buffers for device. For robustness and better RX data buffers management, we allocate a page per packet and build_skb around it. This patch (which is a prerequisite for XDP) will actually reduce performance for normal stack usage, because we are now hitting a bottleneck in the page allocator. We use the page-cache to restore or even improve performance in comparison to the old RX scheme. Packet rate performance testing was done with pktgen 64B packets on xmit side and TC ingress dropping action on RX side. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Comparison is done between: 1.Baseline, before 'net/mlx5e: Build RX SKB on demand' 2.Build SKB with RX page cache (This patch) RX Cores Baseline Build SKB+page-cache Improvement ----------------------------------------------------------- 1 4.16Mpps 5.33Mpps 28% 2 7.16Mpps 10.24Mpps 43% 4 13.61Mpps 20.51Mpps 51% 8 25.32Mpps 32.00Mpps 26% All respective cores were 100% utilized. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22Merge tag 'linux-can-fixes-for-4.8-20160921' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-21 this is another pull request of one patch for the upcoming linux-4.8 release. Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring the transmitter delay. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: dsa: mv88e6xxx: Convert flag bits to unsigned long longAndrew Lunn
We are soon going to run out of flag bits on 32bit systems. Convert to unsigned long long. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: dsa: mv88e6xxx: Add helper for accessing port registersAndrew Lunn
There is a device coming soon which places its port registers somewhere different to all other Marvell switches supported so far. Add helper functions for reading/writing port registers, making it easier to handle this new device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22ptp_clock: future-proofing drivers against PTP subsystem becoming optionalNicolas Pitre
Drivers must be ready to accept NULL from ptp_clock_register() if the PTP clock subsystem is configured out. This patch documents that and ensures that all drivers cope well with a NULL return. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Eugenia Emantayev <eugenia@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: hisilicon: hns: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: hisilicon: hns: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net: ethernet: mediatek: fix missing changes merged for conflicts ↵Sean Wang
overlapping commits add the missing commits about 1) Commit d3bd1ce4db8e843dce421e2f8f123e5251a9c7d3 ("remove redundant free_irq for devm_request_ir allocated irq") 2) Commit 7c6b0d76fa02213393815e3b6d5e4a415bf3f0e2 ("fix logic unbalance between probe and remove") during merge for conflicts overlapping commits by Commit b20b378d49926b82c0a131492fa8842156e0e8a9 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx4_core: Fix to clean devlink resourcesKamal Heib
This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: add support for drop and redirect actionsRahul Lakkireddy
Add support for dropping matched packets in hardware. Also add support for re-directing matched packets to a specified port in hardware. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: add support for offloading u32 filtersRahul Lakkireddy
Add support for offloading u32 filter onto hardware. Links are stored in a jump table to perform necessary jumps to match TCP/UDP header. When inserting rules in the linked bucket, the TCP/UDP match fields in the corresponding entry of the jump table are appended to the filter rule before insertion. If a link is deleted, then all corresponding filters associated with the link are also deleted. Also enable hardware tc offload as a supported feature. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: add parser to translate u32 filters to internal specRahul Lakkireddy
Parse information sent by u32 into internal filter specification. Add support for parsing several fields in IPv4, IPv6, TCP, and UDP. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: add common api support for configuring filtersRahul Lakkireddy
Enable filters for non-offload configuration and add common api support for setting and deleting filters in LE-TCAM region of the hardware. IPv4 filters occupy one slot. IPv6 filters occupy 4 slots and must be on a 4-slot boundary. IPv4 filters can not occupy a slot belonging to IPv6 and the vice-versa is also true. Filters are set and deleted asynchronously. Use completion to wait for reply from firmware in order to allow for synchronization if needed. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22cxgb4: move common filter code to separate fileRahul Lakkireddy
Move common filter code to separate files. Also fix the following checkpatch checks. CHECK: Comparison to NULL could be written "!f->l2t" + if (f->l2t == NULL) { CHECK: spaces preferred around that '/' (ctx:VxV) + fwr->len16_pkd = htonl(FW_WR_LEN16_V(sizeof(*fwr)/16)); Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 08:14:16 +0000