| Age | Commit message (Collapse) | Author |
|---|
|
Add support to collect live firmware coredump via ethtool.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the default hash mode flag in HWRM_VNIC_RSS_CFG to signal to the
firmware that the driver is compliant with the latest spec. With
that, the firmware can return expanded RSS profile IDs that the driver
checks to setup the proper gso_type for GRO-HW packets. But instead
of checking for the new profile IDs, we check the IP_TYPE flag
in TPA_START which is more straight forward than checking a list of
profile IDs.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new mode is "minimal-static" to be used when resources are more
limited to support a large number of VFs, for example The PF driver
will provision guaranteed minimum resources of 0. Each VF has no
guranteed resources until it tries to reserve resources during device
open.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During hotplug, the driver's open function can be called almost
immediately after power on reset. The PHY may not be ready and the
firmware may return failure when the driver tries to update PHY
settings. Add retry logic fired from the driver's timer to retry
the operation for 5 seconds.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add code to detect firmware support for external loopback and the extra
test entry for external loopback.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver gathers statistics using 2 mechanisms. Some stats are DMA'ed
directly from hardware and others are polled from the driver's timer.
Currently, we only adjust the DMA frequency based on the ethtool
stats-block-usecs setting. This patch adjusts the driver's timer
frequency as well to make everything consistent.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New interface has firmware core dump support, new extended port
statistics, and IF state change notifications to the firmware.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lots of overlapping changes, mostly trivial in nature.
The mlxsw conflict was resolving using the example
resolution at:
https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix coding style issue "do not use assignment in if condition"
detected by checkpatch.pl.
Signed-off-by: Kristaps Čivkulis <kristaps.civkulis@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull networking fixes from David Miller:
1) Handle frames in error situations properly in AF_XDP, from Jakub
Kicinski.
2) tcp_mmap test case only tests ipv6 due to a thinko, fix from
Maninder Singh.
3) Session refcnt fix in l2tp_ppp, from Guillaume Nault.
4) Fix regression in netlink bind handling of multicast gruops, from
Dmitry Safonov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netlink: Don't shift on 64 for ngroups
net/smc: no cursor update send in state SMC_INIT
l2tp: fix missing refcount drop in pppol2tp_tunnel_ioctl()
mlxsw: core_acl_flex_actions: Remove redundant mirror resource destruction
mlxsw: core_acl_flex_actions: Remove redundant counter destruction
mlxsw: core_acl_flex_actions: Remove redundant resource destruction
mlxsw: core_acl_flex_actions: Return error for conflicting actions
selftests/bpf: update test_lwt_seg6local.sh according to iproute2
drivers: net: lmc: fix case value for target abort error
selftest/net: fix protocol family to work for IPv4.
net: xsk: don't return frames via the allocator on error
tools/bpftool: fix a percpu_array map dump problem
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There are only 2 callers of scif_get_new_port() and both appear to get
the error handling wrong. Both treat zero returns as error, but it
actually returns negative error codes and >= 0 on success.
Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolved <"foo* bar" should be "foo *bar"> error
Signed-off-by: Parth Y Shah <sparth1292@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Return statements in functions returning bool should use true or false
instead of an integer value.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Assignment of any variable should be kept outside the if statement
Signed-off-by: Parth Y Shah <sparth1292@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the header rtw_iol.h there is only one function declared.
Remove the include of rtw_iol.h from files that do not use
this function.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The header osdep_service.h is included from drv_types.h,
so remove the redundant include.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary parentheses from if conditions.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename rtw_IOL_applied to be all lowercase.
rtw_IOL_applied -> rtw_iol_applied
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the magic number '8' with defined constant which is normally used
'MAX_DEV_ADDR_SIZE'.
This is a coding style change which should have no impact on runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removal of three comments. The comments in question do not add anything
to the understanding of the code, and if they are necessary it would
imply that the structure and its member variables are badly named.
This is a simple style change and should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removal of a blank like which causes a checkpatch issue.
This is a simple coding style change and should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All of the variables used within the structures of the union qos_tclas
cause checkpatch issue due to CamelCase naming. As none the member
variables are used in code all have been changed on one patch.
These changes are coding style in nature and should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Whilst none of the structures inside the qos_tclas union are used, their
names conflict with the coding standard being named in uppercase.
The names of all five have been changed to lowercase.
This is a style change, and since none of the structures are referenced,
these changes should have no impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the typedef from the union QOS_TCLAS, which causes a checkpatch
issue with defining new types. In addition, as a type, the name should
be in lowercase so has been changed.
These are coding style changes and should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Multiple blank line, which cause an issue with checkpath, have been
removed and the spacing of definitions have been aligned to look
cleaner.
These are coding style changes which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The four register constants, 'Current_Tx_Rate_Reg',
'Initial_Tx_Rate_Reg', 'Tx_Retry_Count_Reg' and 'RegC38_TH' all cause
checkpatch issue with CamelCase naming. The three have been renamed to
'CURRENT_TX_RATE_REG', 'INITIAL_TX_RATE_REG', 'TX_RETRY_COUNT_REG' and
'REG_C38_TH' respectively.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The constants 'VeryLowRSSI' and 'CTSToSelfTHVal' generate warnings from
checkpatch due to the use of CamelCase naming. The two constants have
been renamed to 'VERY_LOW_RSSI' and 'CTS_TO_SELF_TH_VAL' respectively.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The two constants, RateAdaptiveTH_Low_20M and RateAdaptiveTH_Low_40M
generate a checkpatch warning about CamelCase naming. The two have been
renamed to clear this issue. RATE_ADAPTIVE_TH_LOW_20M and
RATE_ADAPTIVE_TH_LOW_40M
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The constant RateAdaptiveTH_High causes a checkpatch issue with respect
to CamelCase naming. As a result the constant has been renamed to
RATE_ADAPTIVE_TH_HIGH.
This is purely a coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The constant DM_DIG_MIN_Netcore causes a checkpatch issue with CamelCase
naming so has been renamed to DM_DIG_MIN_NETCORE.
This is a simple coding style change which should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The structure DCMD_TXCMD_T is declared with a typedef, which causes a
checkpatch issue with defining new types. As a result the typedef has
been removed.
The structure's name DCMD_TXCMD_T, as a type, is meant to be lowercase
so has been renamed to tx_config_cmd.
The structures three members, (Op, Length, and Value) are all violating
the coding standard policy on CamelCase naming, so have all been renamed.
They have been renamed with longer names, (cmd_op, cmd_length and
cmd_value), to make the variable names easier to search for in code.
The magic numbers '4' and '12' have both been replaced with sizeof()
calls, as they both represent the size of data elements.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The structure dynamic_rx_path_sel contains a u8 member variable called
reserved. This member variable is never actually used in the code.
The naming suggests that the sizeof the structure is significant but
the only use of the structure is a local static in r8192U_dm.c:
static struct dynamic_rx_path_sel DM_RxPathSelTable;
There is no apparent significance to the sizeof the declared structure
DM_RxPathSelTable. As a result the reserved member variable has been
removed from the structure.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the member variable disabledRF to disabled_rf. This change
resolves the checkpatch issue with CamelCase naming.
The change is purely a coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The member variable diff_TH is assigned a constant value and then used
in a comparison. The variable is never changed so the comparison can
as easily be performed directly with the defined constant.
The member variable has been removed and the defined constant
RxPathSelection_diff_TH renamed to RX_PATH_SELECTION_DIFF_TH, to clear
the checkpatch issue with CamelCase naming.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The member variable SS_TH_low is assigned a constant and then used
in a comparison. This member variable is redundant as the constant
can be used directly for the comparison.
In addition the constant RxPathSelection_SS_TH_low has been renamed
to RX_PATH_SELECTION_SS_TH_LOW, to clear the checkpatch issue with
CamelCase naming.
These changes are coding style in nature and should not impact
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the member variable cck_Rx_path to cck_rx_path. This clears
the checkpatch issue with CamelCase naming.
This is a coding style change which should have no impact one runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The structure dynamic_rx_path_sel defines a member variable 'Enable'
which is initialised and later tested. The variable is however never
changed to the test is redundant and the member variable is then never
used.
The member variable, initialisation and test have all been removed.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The file r8192U_dm.h defines the structure DM_RxPathSelTable as being
external. The structure is however declared in r8192U_dm.c and only
used locally in that file.
As a result the external definition has been removed and the declaration
in r8192U_dm.c changed to being of type static.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the two constants defined in the enumerated type enum
cck_rx_path_method so that they are both uppercase, as suggested by
the coding style.
This is purely a coding style change and should have no impact on
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The structure 'dig' defines a member variable
'initialgain_lowerbound_state', which although initialised to false,
is never used in the code. As a result this unused member variable
has been removed.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The structure 'dig' defines a member variable, (rx_gain_range_max)
which is initialised to the value 'DM_DIG_MAX', (a defined constant).
The variable is then used to test and set another variable. Since
the member rx_gain_range_max is never assigned any other value then
the constant 'DM_DIG_MAX' the code might as well simply use that
constant, rather the a member variable set to that constant.
The member variable has been removed and the constant used directly
in the code. This is a coding style change which should not impact
runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Two structures, (struct dig and struct dynamic_rx_path_sel) contain
a u8 member variable representing debug setting. In the file r8192U_dm.c
these member variables, for both structures, are initialised to an
enumerated constant 'DM_DBG_OFF'. The member variables are never
assigned another value, other then off. Later in code the member
variables are tested to for equality to 'DM_DBG_OFF' and if that is the
case an assignment statement is executed.
Since the value of the variables is always off the test is redundant and
the conditional branch can just be executed without the test. Since the
member variables are then actually used both have been removed, along
with the enumerated type which defines debug status, on/off.
These are coding style changes to remove unused or redundant code, there
should be no impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove below item from TODO as these changes were included as part of
previous submitted patch series.
'rework comments and function headers(also coding style)'
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to avoid below checkpatch issue by replacing the macro
with inline function.
Macro argument 'id' may be better as '(id)' to avoid precedence issues.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup the copyright notice header from the WILC1000 files.
Replace copyright header of 'Atmel' & 'NewportMedia' with 'Microchip & its
subsidiaries'. Also added the same copyright notice header for all
wilc1000 driver source and header files.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There's no need to take an additional reference on the pci_dev structure
for the pointer copy saved in gasket data structures.
This reverts commit:
8dd8a48b9a7d ("staging: gasket: core: hold reference to pci_dev while used")
Reported-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Identify gasket as the subsystem printing various messages.
Add the driver name to appropriate messages to indicate which driver
has a problem.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At device/driver registration time, convert a not-very-informative
info message to a more informative debug message, drop some not overly
helpful debug messages.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove logs for loading gasket drivers.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
