summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-08net: phy: smsc: Fix link failure in forced mode with Auto-MDIXOleksij Rempel
Force a fixed MDI-X mode when auto-negotiation is disabled to prevent link instability. When forcing the link speed and duplex on a LAN9500 PHY (e.g., with `ethtool -s eth0 autoneg off ...`) while leaving MDI-X control in auto mode, the PHY fails to establish a stable link. This occurs because the PHY's Auto-MDIX algorithm is not designed to operate when auto-negotiation is disabled. In this state, the PHY continuously toggles the TX/RX signal pairs, which prevents the link partner from synchronizing. This patch resolves the issue by detecting when auto-negotiation is disabled. If the MDI-X control mode is set to 'auto', the driver now forces a specific, stable mode (ETH_TP_MDI) to prevent the pair toggling. This choice of a fixed MDI mode mirrors the behavior the hardware would exhibit if the AUTOMDIX_EN strap were configured for a fixed MDI connection. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250703114941.3243890-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: phy: smsc: Force predictable MDI-X state on LAN87xxOleksij Rempel
Override the hardware strap configuration for MDI-X mode to ensure a predictable initial state for the driver. The initial mode of the LAN87xx PHY is determined by the AUTOMDIX_EN strap pin, but the driver has no documented way to read its latched status. This unpredictability means the driver cannot know if the PHY has initialized with Auto-MDIX enabled or disabled, preventing it from providing a reliable interface to the user. This patch introduces a `config_init` hook that forces the PHY into a known state by explicitly enabling Auto-MDIX. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250703114941.3243890-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: phy: smsc: Fix Auto-MDIX configuration when disabled by strapOleksij Rempel
Correct the Auto-MDIX configuration to ensure userspace settings are respected when the feature is disabled by the AUTOMDIX_EN hardware strap. The LAN9500 PHY allows its default MDI-X mode to be configured via a hardware strap. If this strap sets the default to "MDI-X off", the driver was previously unable to enable Auto-MDIX from userspace. When handling the ETH_TP_MDI_AUTO case, the driver would set the SPECIAL_CTRL_STS_AMDIX_ENABLE_ bit but neglected to set the required SPECIAL_CTRL_STS_OVRRD_AMDIX_ bit. Without the override flag, the PHY falls back to its hardware strap default, ignoring the software request. This patch corrects the behavior by also setting the override bit when enabling Auto-MDIX. This ensures that the userspace configuration takes precedence over the hardware strap, allowing Auto-MDIX to be enabled correctly in all scenarios. Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: Andre Edich <andre.edich@microchip.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250703114941.3243890-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2EricChan
According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate in level-triggered mode. However, in this configuration, the DMA does not assert the XGMAC_NIS status bit for Rx or Tx interrupt events. This creates a functional regression where the condition if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will never evaluate to true, preventing proper interrupt handling for level-triggered mode. The hardware specification explicitly states that "The DMA does not assert the NIS status bit for the Rx or Tx interrupt events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2). The fix ensures correct handling of both edge and level-triggered interrupts while maintaining backward compatibility with existing configurations. It has been tested on the hardware device (not publicly available), and it can properly trigger the RX and TX interrupt handling in both the INTM=0 and INTM=2 configurations. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Tested-by: EricChan <chenchuangyu@xiaomi.com> Signed-off-by: EricChan <chenchuangyu@xiaomi.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250703020449.105730-1-chenchuangyu@xiaomi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: airoha: Fix an error handling path in airoha_probe()Christophe JAILLET
If an error occurs after a successful airoha_hw_init() call, airoha_ppe_deinit() needs to be called as already done in the remove function. Fixes: 00a7678310fe ("net: airoha: Introduce flowtable offload support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/1c940851b4fa3c3ed2a142910c821493a136f121.1746715755.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe()Haoxiang Li
Add check for the return value of rcar_gen4_ptp_alloc() to prevent potential null pointer dereference. Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://patch.msgid.link/20250703100109.2541018-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07net: bcmgenet: Initialize u64 stats seq counterRyo Takakura
Initialize u64 stats as it uses seq counter on 32bit machines as suggested by lockdep below. [ 1.830953][ T1] INFO: trying to register non-static key. [ 1.830993][ T1] The code is fine but needs lockdep annotation, or maybe [ 1.831027][ T1] you didn't initialize this object before use? [ 1.831057][ T1] turning off the locking correctness validator. [ 1.831090][ T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc2-v7l+ #1 PREEMPT [ 1.831097][ T1] Tainted: [W]=WARN [ 1.831099][ T1] Hardware name: BCM2711 [ 1.831101][ T1] Call trace: [ 1.831104][ T1] unwind_backtrace from show_stack+0x18/0x1c [ 1.831120][ T1] show_stack from dump_stack_lvl+0x8c/0xcc [ 1.831129][ T1] dump_stack_lvl from register_lock_class+0x9e8/0x9fc [ 1.831141][ T1] register_lock_class from __lock_acquire+0x420/0x22c0 [ 1.831154][ T1] __lock_acquire from lock_acquire+0x130/0x3f8 [ 1.831166][ T1] lock_acquire from bcmgenet_get_stats64+0x4a4/0x4c8 [ 1.831176][ T1] bcmgenet_get_stats64 from dev_get_stats+0x4c/0x408 [ 1.831184][ T1] dev_get_stats from rtnl_fill_stats+0x38/0x120 [ 1.831193][ T1] rtnl_fill_stats from rtnl_fill_ifinfo+0x7f8/0x1890 [ 1.831203][ T1] rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xd0/0x138 [ 1.831214][ T1] rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x48/0x8c [ 1.831225][ T1] rtmsg_ifinfo from register_netdevice+0x8c0/0x95c [ 1.831237][ T1] register_netdevice from register_netdev+0x28/0x40 [ 1.831247][ T1] register_netdev from bcmgenet_probe+0x690/0x6bc [ 1.831255][ T1] bcmgenet_probe from platform_probe+0x64/0xbc [ 1.831263][ T1] platform_probe from really_probe+0xd0/0x2d4 [ 1.831269][ T1] really_probe from __driver_probe_device+0x90/0x1a4 [ 1.831273][ T1] __driver_probe_device from driver_probe_device+0x38/0x11c [ 1.831278][ T1] driver_probe_device from __driver_attach+0x9c/0x18c [ 1.831282][ T1] __driver_attach from bus_for_each_dev+0x84/0xd4 [ 1.831291][ T1] bus_for_each_dev from bus_add_driver+0xd4/0x1f4 [ 1.831303][ T1] bus_add_driver from driver_register+0x88/0x120 [ 1.831312][ T1] driver_register from do_one_initcall+0x78/0x360 [ 1.831320][ T1] do_one_initcall from kernel_init_freeable+0x2bc/0x314 [ 1.831331][ T1] kernel_init_freeable from kernel_init+0x1c/0x144 [ 1.831339][ T1] kernel_init from ret_from_fork+0x14/0x20 [ 1.831344][ T1] Exception stack(0xf082dfb0 to 0xf082dff8) [ 1.831349][ T1] dfa0: 00000000 00000000 00000000 00000000 [ 1.831353][ T1] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.831356][ T1] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: 59aa6e3072aa ("net: bcmgenet: switch to use 64bit statistics") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250702092417.46486-1-ryotkkr98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()Luo Jie
The previous commit unintentionally removed the code responsible for enabling WoL via MMD3 register 0x8012 BIT5. As a result, Wake-on-LAN (WoL) support for the QCA808X PHY is no longer functional. The WoL (Wake-on-LAN) feature for the QCA808X PHY is enabled via MMD3 register 0x8012, BIT5. This implementation is aligned with the approach used in at8031_set_wol(). Fixes: e58f30246c35 ("net: phy: at803x: fix the wol setting functions") Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-2-053342b1538d@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07net: phy: qcom: move the WoL function to shared libraryLuo Jie
Move the WoL (Wake-on-LAN) functionality to a shared library to enable its reuse by the QCA808X PHY driver, incorporating support for WoL functionality similar to the implementation in at8031_set_wol(). Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Link: https://patch.msgid.link/20250704-qcom_phy_wol_support-v1-1-053342b1538d@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-04bnxt_en: eliminate the compile warning in bnxt_request_irq due to ↵Jason Xing
CONFIG_RFS_ACCEL I received a kernel-test-bot report[1] that shows the [-Wunused-but-set-variable] warning. Since the previous commit I made, as the 'Fixes' tag shows, gives users an option to turn on and off the CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with GCC specifically. Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer bugs. [1] All warnings (new ones prefixed by >>): drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq': >> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] 10703 | int i, j, rc = 0; | ^ Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/ Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-03Merge tag 'net-6.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from Bluetooth. Current release - new code bugs: - eth: - txgbe: fix the issue of TX failure - ngbe: specify IRQ vector when the number of VFs is 7 Previous releases - regressions: - sched: always pass notifications when child class becomes empty - ipv4: fix stat increase when udp early demux drops the packet - bluetooth: prevent unintended pause by checking if advertising is active - virtio: fix error reporting in virtqueue_resize - eth: - virtio-net: - ensure the received length does not exceed allocated size - fix the xsk frame's length check - lan78xx: fix WARN in __netif_napi_del_locked on disconnect Previous releases - always broken: - bluetooth: mesh: check instances prior disabling advertising - eth: - idpf: convert control queue mutex to a spinlock - dpaa2: fix xdp_rxq_info leak - amd-xgbe: align CL37 AN sequence as per databook" * tag 'net-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) vsock/vmci: Clear the vmci transport packet properly when initializing it dt-bindings: net: sophgo,sg2044-dwmac: Drop status from the example net: ngbe: specify IRQ vector when the number of VFs is 7 net: wangxun: revert the adjustment of the IRQ vector sequence net: txgbe: request MISC IRQ in ndo_open virtio_net: Enforce minimum TX ring size for reliability virtio_net: Cleanup '2+MAX_SKB_FRAGS' virtio_ring: Fix error reporting in virtqueue_resize virtio-net: xsk: rx: fix the frame's length check virtio-net: use the check_mergeable_len helper virtio-net: remove redundant truesize check with PAGE_SIZE virtio-net: ensure the received length does not exceed allocated size net: ipv4: fix stat increase when udp early demux drops the packet net: libwx: fix the incorrect display of the queue number amd-xgbe: do not double read link status net/sched: Always pass notifications when child class becomes empty nui: Fix dma_mapping_error() check rose: fix dangling neighbour pointers in rose_rt_device_down() enic: fix incorrect MTU comparison in enic_change_mtu() amd-xgbe: align CL37 AN sequence as per databook ...
2025-07-03net: ngbe: specify IRQ vector when the number of VFs is 7Jiawen Wu
For NGBE devices, the queue number is limited to be 1 when SRIOV is enabled. In this case, IRQ vector[0] is used for MISC and vector[1] is used for queue, based on the previous patches. But for the hardware design, the IRQ vector[1] must be allocated for use by the VF[6] when the number of VFs is 7. So the IRQ vector[0] should be shared for PF MISC and QUEUE interrupts. +-----------+----------------------+ | Vector | Assigned To | +-----------+----------------------+ | Vector 0 | PF MISC and QUEUE | | Vector 1 | VF 6 | | Vector 2 | VF 5 | | Vector 3 | VF 4 | | Vector 4 | VF 3 | | Vector 5 | VF 2 | | Vector 6 | VF 1 | | Vector 7 | VF 0 | +-----------+----------------------+ Minimize code modifications, only adjust the IRQ vector number for this case. Fixes: 877253d2cbf2 ("net: ngbe: add sriov function support") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20250701063030.59340-4-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03net: wangxun: revert the adjustment of the IRQ vector sequenceJiawen Wu
Due to hardware limitations of NGBE, queue IRQs can only be requested on vector 0 to 7. When the number of queues is set to the maximum 8, the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by MISC interrupt, and althrough the vector 8 is used by queue interrupt, it is unable to receive packets. This will cause some packets to be dropped when RSS is enabled and they are assigned to queue 8. So revert the adjustment of the MISC IRQ location, to make it be the last one in IRQ vectors. Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03net: txgbe: request MISC IRQ in ndo_openJiawen Wu
Move the creating of irq_domain for MISC IRQ from .probe to .ndo_open, and free it in .ndo_stop, to maintain consistency with the queue IRQs. This it for subsequent adjustments to the IRQ vectors. Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250701063030.59340-2-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio_net: Enforce minimum TX ring size for reliabilityLaurent Vivier
The `tx_may_stop()` logic stops TX queues if free descriptors (`sq->vq->num_free`) fall below the threshold of (`MAX_SKB_FRAGS` + 2). If the total ring size (`ring_num`) is not strictly greater than this value, queues can become persistently stopped or stop after minimal use, severely degrading performance. A single sk_buff transmission typically requires descriptors for: - The virtio_net_hdr (1 descriptor) - The sk_buff's linear data (head) (1 descriptor) - Paged fragments (up to MAX_SKB_FRAGS descriptors) This patch enforces that the TX ring size ('ring_num') must be strictly greater than (MAX_SKB_FRAGS + 2). This ensures that the ring is always large enough to hold at least one maximally-fragmented packet plus at least one additional slot. Reported-by: Lei Yang <leiyang@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-4-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio_net: Cleanup '2+MAX_SKB_FRAGS'Laurent Vivier
Improve consistency by using everywhere it is needed 'MAX_SKB_FRAGS + 2' rather than '2+MAX_SKB_FRAGS' or '2 + MAX_SKB_FRAGS'. No functional change. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-3-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio_ring: Fix error reporting in virtqueue_resizeLaurent Vivier
The virtqueue_resize() function was not correctly propagating error codes from its internal resize helper functions, specifically virtqueue_resize_packet() and virtqueue_resize_split(). If these helpers returned an error, but the subsequent call to virtqueue_enable_after_reset() succeeded, the original error from the resize operation would be masked. Consequently, virtqueue_resize() could incorrectly report success to its caller despite an underlying resize failure. This change restores the original code behavior: if (vdev->config->enable_vq_after_reset(_vq)) return -EBUSY; return err; Fix: commit ad48d53b5b3f ("virtio_ring: separate the logic of reset/enable from virtqueue_resize") Cc: xuanzhuo@linux.alibaba.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250521092236.661410-2-lvivier@redhat.com Tested-by: Lei Yang <leiyang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio-net: xsk: rx: fix the frame's length checkBui Quang Minh
When calling buf_to_xdp, the len argument is the frame data's length without virtio header's length (vi->hdr_len). We check that len with xsk_pool_get_rx_frame_size() + vi->hdr_len to ensure the provided len does not larger than the allocated chunk size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk, we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost to start placing data from hard_start + XDP_PACKET_HEADROOM - vi->hdr_len not hard_start + XDP_PACKET_HEADROOM But the first buffer has virtio_header, so the maximum frame's length in the first buffer can only be xsk_pool_get_rx_frame_size() not xsk_pool_get_rx_frame_size() + vi->hdr_len like in the current check. This commit adds an additional argument to buf_to_xdp differentiate between the first buffer and other ones to correctly calculate the maximum frame's length. Cc: stable@vger.kernel.org Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Fixes: a4e7ba702701 ("virtio_net: xsk: rx: support recv small mode") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://patch.msgid.link/20250630151315.86722-2-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio-net: use the check_mergeable_len helperBui Quang Minh
Replace the current repeated code to check received length in mergeable mode with the new check_mergeable_len helper. Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250630144212.48471-4-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio-net: remove redundant truesize check with PAGE_SIZEBui Quang Minh
The truesize is guaranteed not to exceed PAGE_SIZE in get_mergeable_buf_len(). It is saved in mergeable context, which is not changeable by the host side, so the check in receive path is quite redundant. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://patch.msgid.link/20250630144212.48471-3-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-03virtio-net: ensure the received length does not exceed allocated sizeBui Quang Minh
In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. Cc: <stable@vger.kernel.org> Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20250630144212.48471-2-minhquangbui99@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-02Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-07-01 (idpf, igc) For idpf: Michal returns 0 for key size when RSS is not supported. Ahmed changes control queue to a spinlock due to sleeping calls. For igc: Vitaly disables L1.2 PCI-E link substate on I226 devices to resolve performance issues. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: disable L1.2 PCI-E link substate to avoid performance issue idpf: convert control queue mutex to a spinlock idpf: return 0 size for RSS key if not supported ==================== Link: https://patch.msgid.link/20250701164317.2983952-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02net: libwx: fix the incorrect display of the queue numberJiawen Wu
When setting "ethtool -L eth0 combined 1", the number of RX/TX queue is changed to be 1. RSS is disabled at this moment, and the indices of FDIR have not be changed in wx_set_rss_queues(). So the combined count still shows the previous value. This issue was introduced when supporting FDIR. Fix it for those devices that support FDIR. Fixes: 34744a7749b3 ("net: txgbe: add FDIR info to ethtool ops") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/A5C8FE56D6C04608+20250701070625.73680-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02amd-xgbe: do not double read link statusRaju Rangoju
The link status is latched low so that momentary link drops can be detected. Always double-reading the status defeats this design feature. Only double read if link was already down This prevents unnecessary duplicate readings of the link status. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250701065016.4140707-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-02Merge tag 'mmc-v6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Apply BROKEN_SD_DISCARD quirk earlier during init - Silence some confusing error messages for SD UHS-II cards MMC host: - mtk-sd: - Prevent memory corruption from DMA map failure - Fix a pagefault in dma_unmap_sg() for not prepared data - sdhci: Revert "Disable SD card clock before changing parameters" - sdhci-of-k1: Fix error code in probe() - sdhci-uhs2: Silence some confusing error messages for SD UHS-II cards" * tag 'mmc-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mtk-sd: reset host->mrq on prepare_data() error Revert "mmc: sdhci: Disable SD card clock before changing parameters" mmc: sdhci-uhs2: Adjust some error messages and register dump for SD UHS-II card mmc: sdhci: Add a helper function for dump register in dynamic debug mode mmc: core: Adjust some error messages for SD UHS-II cards mtk-sd: Prevent memory corruption from DMA map failure mtk-sd: Fix a pagefault in dma_unmap_sg() for not prepared data mmc: sdhci-of-k1: Fix error code in probe() mmc: core: sd: Apply BROKEN_SD_DISCARD quirk earlier
2025-07-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Several mlx5 bugs, crashers, and reports: - Limit stack usage - Fix mis-use of __xa_store/erase() without holding the lock to a locked version - Rate limit prints in the gid cache error cases - Fully initialize the event object before making it globally visible in an xarray - Fix deadlock inside the ODP code if the MMU notifier was called from a reclaim context - Include missed counters for some switchdev configurations and mulit-port MPV mode - Fix loopback packet support when in mulit-port MPV mode" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix vport loopback for MPV device RDMA/mlx5: Fix CC counters query for MPV RDMA/mlx5: Fix HW counters query for non-representor devices IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdep IB/mlx5: Fix potential deadlock in MR deregistration RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert RDMA/core: Rate limit GID cache warning messages RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling RDMA/mlx5: reduce stack usage in mlx5_ib_ufile_hw_cleanup
2025-07-02nui: Fix dma_mapping_error() checkThomas Fourier
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values which is often ~0. The error value should be tested with dma_mapping_error(). This patch creates a new function in niu_ops to test if the mapping failed. The test is fixed in niu_rbr_add_page(), added in niu_start_xmit() and the successfully mapped pages are unmaped upon error. Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-07-01enic: fix incorrect MTU comparison in enic_change_mtu()Alok Tiwari
The comparison in enic_change_mtu() incorrectly used the current netdev->mtu instead of the new new_mtu value when warning about an MTU exceeding the port MTU. This could suppress valid warnings or issue incorrect ones. Fix the condition and log to properly reflect the new_mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: John Daley <johndale@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01amd-xgbe: align CL37 AN sequence as per databookRaju Rangoju
Update the Clause 37 Auto-Negotiation implementation to properly align with the PCS hardware specifications: - Fix incorrect bit settings in Link Status and Link Duplex fields - Implement missing sequence steps 2 and 7 These changes ensure CL37 auto-negotiation protocol follows the exact sequence patterns as specified in the hardware databook. Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-01Merge tag 'mfd-fixes-6.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD fix from Lee Jones: - Fix some -Werror=unused-variable build errors * tag 'mfd-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: Fix building without CONFIG_OF
2025-07-01igc: disable L1.2 PCI-E link substate to avoid performance issueVitaly Lifshits
I226 devices advertise support for the PCI-E link L1.2 substate. However, due to a hardware limitation, the exit latency from this low-power state is longer than the packet buffer can tolerate under high traffic conditions. This can lead to packet loss and degraded performance. To mitigate this, disable the L1.2 substate. The increased power draw between L1.1 and L1.2 is insignificant. Fixes: 43546211738e ("igc: Add new device ID's") Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-01idpf: convert control queue mutex to a spinlockAhmed Zaki
With VIRTCHNL2_CAP_MACFILTER enabled, the following warning is generated on module load: [ 324.701677] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578 [ 324.701684] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1582, name: NetworkManager [ 324.701689] preempt_count: 201, expected: 0 [ 324.701693] RCU nest depth: 0, expected: 0 [ 324.701697] 2 locks held by NetworkManager/1582: [ 324.701702] #0: ffffffff9f7be770 (rtnl_mutex){....}-{3:3}, at: rtnl_newlink+0x791/0x21e0 [ 324.701730] #1: ff1100216c380368 (_xmit_ETHER){....}-{2:2}, at: __dev_open+0x3f0/0x870 [ 324.701749] Preemption disabled at: [ 324.701752] [<ffffffff9cd23b9d>] __dev_open+0x3dd/0x870 [ 324.701765] CPU: 30 UID: 0 PID: 1582 Comm: NetworkManager Not tainted 6.15.0-rc5+ #2 PREEMPT(voluntary) [ 324.701771] Hardware name: Intel Corporation M50FCP2SBSTD/M50FCP2SBSTD, BIOS SE5C741.86B.01.01.0001.2211140926 11/14/2022 [ 324.701774] Call Trace: [ 324.701777] <TASK> [ 324.701779] dump_stack_lvl+0x5d/0x80 [ 324.701788] ? __dev_open+0x3dd/0x870 [ 324.701793] __might_resched.cold+0x1ef/0x23d <..> [ 324.701818] __mutex_lock+0x113/0x1b80 <..> [ 324.701917] idpf_ctlq_clean_sq+0xad/0x4b0 [idpf] [ 324.701935] ? kasan_save_track+0x14/0x30 [ 324.701941] idpf_mb_clean+0x143/0x380 [idpf] <..> [ 324.701991] idpf_send_mb_msg+0x111/0x720 [idpf] [ 324.702009] idpf_vc_xn_exec+0x4cc/0x990 [idpf] [ 324.702021] ? rcu_is_watching+0x12/0xc0 [ 324.702035] idpf_add_del_mac_filters+0x3ed/0xb50 [idpf] <..> [ 324.702122] __hw_addr_sync_dev+0x1cf/0x300 [ 324.702126] ? find_held_lock+0x32/0x90 [ 324.702134] idpf_set_rx_mode+0x317/0x390 [idpf] [ 324.702152] __dev_open+0x3f8/0x870 [ 324.702159] ? __pfx___dev_open+0x10/0x10 [ 324.702174] __dev_change_flags+0x443/0x650 <..> [ 324.702208] netif_change_flags+0x80/0x160 [ 324.702218] do_setlink.isra.0+0x16a0/0x3960 <..> [ 324.702349] rtnl_newlink+0x12fd/0x21e0 The sequence is as follows: rtnl_newlink()-> __dev_change_flags()-> __dev_open()-> dev_set_rx_mode() - > # disables BH and grabs "dev->addr_list_lock" idpf_set_rx_mode() -> # proceed only if VIRTCHNL2_CAP_MACFILTER is ON __dev_uc_sync() -> idpf_add_mac_filter -> idpf_add_del_mac_filters -> idpf_send_mb_msg() -> idpf_mb_clean() -> idpf_ctlq_clean_sq() # mutex_lock(cq_lock) Fix by converting cq_lock to a spinlock. All operations under the new lock are safe except freeing the DMA memory, which may use vunmap(). Fix by requesting a contiguous physical memory for the DMA mapping. Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-01idpf: return 0 size for RSS key if not supportedMichal Swiatkowski
Returning -EOPNOTSUPP from function returning u32 is leading to cast and invalid size value as a result. -EOPNOTSUPP as a size probably will lead to allocation fail. Command: ethtool -x eth0 It is visible on all devices that don't have RSS caps set. [ 136.615917] Call Trace: [ 136.615921] <TASK> [ 136.615927] ? __warn+0x89/0x130 [ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.615953] ? report_bug+0x164/0x190 [ 136.615968] ? handle_bug+0x58/0x90 [ 136.615979] ? exc_invalid_op+0x17/0x70 [ 136.615987] ? asm_exc_invalid_op+0x1a/0x20 [ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.616028] __alloc_pages_noprof+0xe/0x20 [ 136.616038] ___kmalloc_large_node+0x80/0x110 [ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0 [ 136.616081] __kmalloc_noprof+0x32c/0x4c0 [ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616114] ethnl_default_doit+0x107/0x3d0 [ 136.616131] genl_family_rcv_msg_doit+0x100/0x160 [ 136.616147] genl_rcv_msg+0x1b8/0x2c0 [ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10 [ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10 [ 136.616176] netlink_rcv_skb+0x58/0x110 [ 136.616186] genl_rcv+0x28/0x40 [ 136.616195] netlink_unicast+0x19b/0x290 [ 136.616206] netlink_sendmsg+0x222/0x490 [ 136.616215] __sys_sendto+0x1fd/0x210 [ 136.616233] __x64_sys_sendto+0x24/0x30 [ 136.616242] do_syscall_64+0x82/0x160 [ 136.616252] ? __sys_recvmsg+0x83/0xe0 [ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210 [ 136.616275] ? do_syscall_64+0x8e/0x160 [ 136.616282] ? __count_memcg_events+0xa1/0x130 [ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30 [ 136.616306] ? handle_mm_fault+0xae/0x2d0 [ 136.616319] ? do_user_addr_fault+0x379/0x670 [ 136.616328] ? clear_bhb_loop+0x45/0xa0 [ 136.616340] ? clear_bhb_loop+0x45/0xa0 [ 136.616349] ? clear_bhb_loop+0x45/0xa0 [ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 136.616369] RIP: 0033:0x7fd30ba7b047 [ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44 [ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047 [ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003 [ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c [ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340 [ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000 Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-30net: usb: lan78xx: fix WARN in __netif_napi_del_locked on disconnectOleksij Rempel
Remove redundant netif_napi_del() call from disconnect path. A WARN may be triggered in __netif_napi_del_locked() during USB device disconnect: WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 This happens because netif_napi_del() is called in the disconnect path while NAPI is still enabled. However, it is not necessary to call netif_napi_del() explicitly, since unregister_netdev() will handle NAPI teardown automatically and safely. Removing the redundant call avoids triggering the warning. Full trace: lan78xx 1-1:1.0 enu1: Failed to read register index 0x000000c4. ret = -ENODEV lan78xx 1-1:1.0 enu1: Failed to set MAC down with error -ENODEV lan78xx 1-1:1.0 enu1: Link is Down lan78xx 1-1:1.0 enu1: Failed to read register index 0x00000120. ret = -ENODEV ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:7417 __netif_napi_del_locked+0x2b4/0x350 Modules linked in: flexcan can_dev fuse CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 6.16.0-rc2-00624-ge926949dab03 #9 PREEMPT Hardware name: SKOV IMX8MP CPU revC - bd500 (DT) Workqueue: usb_hub_wq hub_event pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __netif_napi_del_locked+0x2b4/0x350 lr : __netif_napi_del_locked+0x7c/0x350 sp : ffffffc085b673c0 x29: ffffffc085b673c0 x28: ffffff800b7f2000 x27: ffffff800b7f20d8 x26: ffffff80110bcf58 x25: ffffff80110bd978 x24: 1ffffff0022179eb x23: ffffff80110bc000 x22: ffffff800b7f5000 x21: ffffff80110bc000 x20: ffffff80110bcf38 x19: ffffff80110bcf28 x18: dfffffc000000000 x17: ffffffc081578940 x16: ffffffc08284cee0 x15: 0000000000000028 x14: 0000000000000006 x13: 0000000000040000 x12: ffffffb0022179e8 x11: 1ffffff0022179e7 x10: ffffffb0022179e7 x9 : dfffffc000000000 x8 : 0000004ffdde8619 x7 : ffffff80110bcf3f x6 : 0000000000000001 x5 : ffffff80110bcf38 x4 : ffffff80110bcf38 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 1ffffff0022179e7 x0 : 0000000000000000 Call trace: __netif_napi_del_locked+0x2b4/0x350 (P) lan78xx_disconnect+0xf4/0x360 usb_unbind_interface+0x158/0x718 device_remove+0x100/0x150 device_release_driver_internal+0x308/0x478 device_release_driver+0x1c/0x30 bus_remove_device+0x1a8/0x368 device_del+0x2e0/0x7b0 usb_disable_device+0x244/0x540 usb_disconnect+0x220/0x758 hub_event+0x105c/0x35e0 process_one_work+0x760/0x17b0 worker_thread+0x768/0xce8 kthread+0x3bc/0x690 ret_from_fork+0x10/0x20 irq event stamp: 211604 hardirqs last enabled at (211603): [<ffffffc0828cc9ec>] _raw_spin_unlock_irqrestore+0x84/0x98 hardirqs last disabled at (211604): [<ffffffc0828a9a84>] el1_dbg+0x24/0x80 softirqs last enabled at (211296): [<ffffffc080095f10>] handle_softirqs+0x820/0xbc8 softirqs last disabled at (210993): [<ffffffc080010288>] __do_softirq+0x18/0x20 ---[ end trace 0000000000000000 ]--- lan78xx 1-1:1.0 enu1: failed to kill vid 0081/0 Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250627051346.276029-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-30net: txgbe: fix the issue of TX failureJiawen Wu
There is a occasional problem that ping is failed between AML devices. That is because the manual enablement of the security Tx path on the hardware is missing, no matter what its previous state was. Fixes: 6f8b4c01a8cd ("net: txgbe: Implement PHYLINK for AML 25G/10G devices") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/5BDFB14C57D1C42A+20250626085153.86122-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-30Merge tag 'rtc-6.16-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: "Some fixes for 6.16. The cmos one is important for PREEMPT_RT. I've also added the s5m changes as they had a dependency on the MFD pull request that was included in 6.16-rc1 and we didn't synchronize before the merge window and they won't hurt. - cmos: use spin_lock_irqsave in cmos_interrupt - pcf2127: fix SPI command byte for PCF2131 - s5m: add S2MPG10 support" * tag 'rtc-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: add missing semicolon after statement rtc: pcf2127: fix SPI command byte for PCF2131 rtc: cmos: use spin_lock_irqsave in cmos_interrupt rtc: s5m: replace open-coded read/modify/write registers with regmap helpers rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits rtc: s5m: switch to devm_device_init_wakeup rtc: s5m: fix a typo: peding -> pending rtc: s5m: add support for S2MPG10 RTC rtc: s5m: prepare for external regmap rtc: s5m: cache device type during probe
2025-06-29Merge tag 'staging-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 6.16-rc4. It resolves a build error in the rtl8723bs driver for some versions of clang on arm64 when checking the frame size with -Wframe-larger-than. It has been in linux-next for a while now with no reported issues" * tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
2025-06-29Merge tag 'tty-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are five small serial and tty and vt fixes for 6.16-rc4. Included in here are: - kerneldoc fixes for recent vt changes - imx serial driver fix - of_node sysfs fix for a regression - vt missing notification fix - 8250 dt bindings fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive serial: imx: Restore original RXTL for console to fix data loss serial: core: restore of_node information in sysfs vt: fix kernel-doc warnings in ucs_get_fallback() vt: add missing notification when switching back to text mode
2025-06-29Merge tag 'edac_urgent_for_v6.16_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Consider secondary address mask registers in amd64_edac in order to get the correct total memory size of the system * tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
2025-06-28Merge tag 'i2c-for-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - imx: fix SMBus protocol compliance during block read - omap: fix error handling path in probe - robotfuzz, tiny-usb: prevent zero-length reads - x86, designware, amdisp: fix build error when modules are disabled (agreed to go in via i2c) - scx200_acb: fix build error because of missing HAS_IOPORT * tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: scx200_acb: depends on HAS_IOPORT i2c: omap: Fix an error handling path in omap_i2c_probe() platform/x86: Use i2c adapter name to fix build errors i2c: amd-isp: Initialize unique adapter name i2c: designware: Initialize adapter name only when not set i2c: tiny-usb: disable zero-length read messages i2c: robotfuzz-osif: disable zero-length read messages i2c: imx: fix emulated smbus block read
2025-06-27Merge tag 'pci-v6.16-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fix from Bjorn Helgaas: - Fix a PTM debugfs build error with CONFIG_DEBUG_FS=n && CONFIG_PCIE_PTM=y (Manivannan Sadhasivam) * tag 'pci-v6.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/PTM: Build debugfs code only if CONFIG_DEBUG_FS is enabled
2025-06-27Merge tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Regular weekly drm updates, nothing out of the ordinary, amdgpu, xe, i915 and a few misc bits. Seems about right for this time in the release cycle. core: - fix drm_writeback_connector_cleanup function signature - use correct HDMI audio bridge in drm_connector_hdmi_audio_init bridge: - SN65DSI86: fix HPD amdgpu: - Cleaner shader support for additional GFX9 GPUs - MES firmware compatibility fixes - Discovery error reporting fixes - SDMA6/7 userq fixes - Backlight fix - EDID sanity check i915: - Fix for SNPS PHY HDMI for 1080p@120Hz - Correct DP AUX DPCD probe address - Followup build fix for GCOV and AutoFDO enabled config xe: - Missing error check - Fix xe_hwmon_power_max_write - Move flushes - Explicitly exit CT safe mode on unwind - Process deferred GGTT node removals on device unwind" * tag 'drm-fixes-2025-06-28' of https://gitlab.freedesktop.org/drm/kernel: drm/xe: Process deferred GGTT node removals on device unwind drm/xe/guc: Explicitly exit CT safe mode on unwind drm/xe: move DPT l2 flush to a more sensible place drm/xe: Move DSB l2 flush to a more sensible place drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type drm/i915: fix build error some more drm/xe/hwmon: Fix xe_hwmon_power_max_write drm/xe/display: Add check for alloc_ordered_workqueue() drm/amd/display: Add sanity checks for drm_edid_raw() drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value drm/amdgpu/sdma7: add ucode version checks for userq support drm/amdgpu/sdma6: add ucode version checks for userq support drm/amd: Adjust output for discovery error handling drm/amdgpu/mes: add compatibility checks for set_hw_resource_1 drm/amdgpu/gfx9: Add Cleaner Shader Support for GFX9.x GPUs drm/bridge-connector: Fix bridge in drm_connector_hdmi_audio_init() drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS drm/i915/snps_hdmi_pll: Fix 64-bit divisor truncation by using div64_u64 drm: writeback: Fix drm_writeback_connector_cleanup signature
2025-06-27Merge tag 'cxl-fixes-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull Compute Express Link (CXL) fixes from Dave Jiang: "These fixes address a few issues in the CXL subsystem, including dealing with some bugs in the CXL EDAC and RAS drivers: - Fix return value of cxlctl_validate_set_features() - Fix min_scrub_cycle of a region miscaculation and add additional documentation - Fix potential memory leak issues for CXL EDAC - Fix CPER handler device confusion for CXL RAS - Fix using wrong repair type to check DRAM event record" * tag 'cxl-fixes-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/edac: Fix using wrong repair type to check dram event record cxl/ras: Fix CPER handler device confusion cxl/edac: Fix potential memory leak issues cxl/Documentation: Add more description about min/max scrub cycle cxl/edac: Fix the min_scrub_cycle of a region miscalculation cxl: fix return value in cxlctl_validate_set_features()
2025-06-27dpaa2-eth: fix xdp_rxq_info leakFushuai Wang
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg() but failed to properly unregister them in error paths and during removal. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-27ethernet: atl1: Add missing DMA mapping error checks and count errorsThomas Fourier
The `dma_map_XXX()` functions can fail and must be checked using `dma_mapping_error()`. This patch adds proper error handling for all DMA mapping calls. In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is deallocated and marked accordingly. In `atl1_tx_map()`, previously mapped buffers are unmapped and the packet is dropped on failure. If `atl1_xmit_frame()` drops the packet, increment the tx_error counter. Fixes: f3cc28c79760 ("Add Attansic L1 ethernet driver.") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://patch.msgid.link/20250625141629.114984-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-28Merge tag 'drm-misc-fixes-2025-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.16-rc4: - Fix function signature of drm_writeback_connector_cleanup. - Use correct HDMI audio bridge in drm_connector_hdmi_audio_init. - Make HPD work on SN65DSI86. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/3dd1d5e1-73b6-4b0c-a208-f7d6235cf530@linux.intel.com
2025-06-27Merge tag 'acpi-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a commit that attempted to fix a memory leak in an error code path and introduced a different issue (Zhe Qiao)" * tag 'acpi-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PCI/ACPI: Fix allocated memory release on error in pci_acpi_scan_root()"
2025-06-27Merge tag 'block-6.16-20250626' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fixes for ublk: - fix C++ narrowing warnings in the uapi header - update/improve UBLK_F_SUPPORT_ZERO_COPY comment in uapi header - fix for the ublk ->queue_rqs() implementation, limiting a batch to just the specific task AND ring - ublk_get_data() error handling fix - sanity check more arguments in ublk_ctrl_add_dev() - selftest addition - NVMe pull request via Christoph: - reset delayed remove_work after reconnect - fix atomic write size validation - Fix for a warning introduced in bdev_count_inflight_rw() in this merge window * tag 'block-6.16-20250626' of git://git.kernel.dk/linux: block: fix false warning in bdev_count_inflight_rw() ublk: sanity check add_dev input for underflow nvme: fix atomic write size validation nvme: refactor the atomic write unit detection nvme: reset delayed remove_work after reconnect ublk: setup ublk_io correctly in case of ublk_get_data() failure ublk: update UBLK_F_SUPPORT_ZERO_COPY comment in UAPI header ublk: fix narrowing warnings in UAPI header selftests: ublk: don't take same backing file for more than one ublk devices ublk: build batch from IOs in same io_ring_ctx and io task
2025-06-27Merge tag 'ata-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Niklas Cassel: - Use the correct DMI identifier for ASUSPRO-D840SA LPM quirk such that the quirk actually gets applied (me) * tag 'ata-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: ahci: Use correct DMI identifier for ASUSPRO-D840SA LPM quirk
2025-06-27Merge tag 's390-6.16-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Fix incorrectly dropped dereferencing of the stack nth entry introduced with a previous KASAN false positive fix - Use a proper memdup_array_user() helper to prevent overflow in a protected key size calculation * tag 's390-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ptrace: Fix pointer dereferencing in regs_get_kernel_stack_nth() s390/pkey: Prevent overflow in size calculation for memdup_user()
generated by cgit (git 2.34.1) at 2025-09-11 05:39:12 +0000