| Age | Commit message (Collapse) | Author |
|---|
|
When deleting a nvmet-rdma ctrl, we essentially loop over all
queues that belong to the controller and schedule a removal of
each. Instead of restarting the loop every time a queue is found,
do a simple safe list traversal.
This addresses an unneeded time spent scheduling queue removal in
cases there a lot of queues.
Signed-off-by: Sagi Grimberg <sagi.grimberg@vastdata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If nvmet_auth_ctrl_hash() fails, return the error code to its callers
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We don't need to run the validation of the XML files if we are just
compiling the kernel. Skip the validation unless the user enables
corresponding Kconfig option. This removes a warning from gen_header.py
about lxml being not installed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240409120108.2303d0bd@canb.auug.org.au/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/592558/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
These tables were made non-const in commit 3cba4a2cdff3 ("drm/msm/a6xx:
Update ROQ size in coredump") in order to avoid powering up the GPU when
reading back a devcoredump. Instead let's just stash the count that is
potentially read from hw in struct a6xx_gpu_state_obj, and make the
tables const again.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/592699/
|
|
With the name that is currently looked up it is considerably easier to
understand the issue and fix the warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240507104703.2070117-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:
nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled
These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.
Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:
02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This register number is hardware-specific, rename it for clarity.
FIXME comments are added in a few places where it seems like the wrong
register is used. As I can't test this, only the rename is done with no
functional change.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124105031.45734-1-matthias.schiffer@ew.tq-group.com
|
|
If both CONFIG_SENSORS_AMS_PMU and CONFIG_SENSORS_AMS_I2C are unset,
there is an unused variable warning in the ams driver:
drivers/macintosh/ams/ams-core.c: In function 'ams_init':
drivers/macintosh/ams/ams-core.c:181:29: warning: unused variable 'np'
181 | struct device_node *np;
The driver needs at least one of the configs enabled in order to
actually function. So fix the compiler warning by ensuring at least one
of the configs is enabled.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240507140150.54630-1-mpe@ellerman.id.au
|
|
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c96d
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This device is already fixed by "HID: do not assume HAT Switch
logical max < 8", but for people without the fix already, having the
HID-BPF locally can fix the device while they wait for their
distribution to update.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-9-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
Fortunately, before entering eraser mode, (so Invert = 1),
the tablet always sends an out-of-proximity event.
So we can detect that single event and:
- if there was none but the invert bit was toggled: this is the
third button
- if there was this out-of-proximity event, we are entering
eraser mode, and we will until the next out-of-proximity.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-8-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When using the XBox Wireless Controller Elite 2 over Bluetooth,
the device exports the paddle on the back of the device as a single
bitfield value of usage "Assign Selection".
The kernel doesn't process those usages properly and report KEY_UNKNOWN
for it.
SDL doesn't know how to interprete that KEY_UNKNOWN and thus ignores the
paddles.
Given that over USB the kernel uses BTN_TRIGGER_HAPPY[5-8], we
can tweak the report descriptor to make the kernel interprete it properly:
- we need an application collection of gamepad (so we have to close the
current Consumer Control one)
- we need to change the usage to be buttons from 0x15 to 0x18
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-7-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This pen is compatible with multiple Wacom tablets, but we only add support
for the Intuos Pro 2 M, as this is the one our user reported the bug
against.
We can not generically add all compatible Wacom tablets as we are
writing the offsets by hand.
The point of this HID-BPF program is to work around a firmware limitation
where the pressure is repeated every other report.
Given that we know this will happen, we can change the first new pressure
information with the mean compared to the previous one. This way we
smooth the incoming pressure without losing information.
Cc: Ping Cheng <pinglinux@gmail.com>
Cc: Jason Gerecke <killertofu@gmail.com>
Cc: Aaron Armstrong Skomra <skomra@gmail.com>
Cc: Joshua Dickens <Joshua@joshua-dickens.com>
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-6-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Allows to export more than 5 buttons on this 12 buttons mouse.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-5-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
Presenter Mouse"), but in a slightly better way.
This time we actually change the application collection, making clearer
for userspace what the second mouse is.
Note that having both hid-quirks fix and this HID-BPF fix is not a
problem at all.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-4-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Same problem than the Artist 24: the second button on the pen is treated
like an eraser.
But the problem is even worse this time. There is an actual eraser at
the tail of the pen.
The compensation of the coordinates was done by Martin
Signed-off-by: Martin Sivak <mars@montik.net>
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-3-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This commit adds a fix for XPPen Artist 24 where the second button on
the pen is used as an eraser.
It's a "feature" from Microsoft, but it turns out that it's actually
painful for artists. So we ship here a HID-BPF program that turns this
second button into an actual button.
Note that the HID-BPF program is not directly loaded by the kernel itself
but by udev-hid-bpf[0]. But having the sources here allows us to also
integrate tests into tools/testing/selftests/hid to ensure the HID-BPF
program are actually tested.
[0] https://gitlab.freedesktop.org/libevdev/udev-hid-bpf
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-2-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This reverts commit 3f9f231236ce7e48780d8a4f1f8cb9fae2df1e4e.
Using 64bit for 'sync_io' is unnecessary from the gendisk side. This
overflow will not cause any functional impact, except for a UBSAN
warning. Solving this overflow requires introducing additional
calculations and checks which are not necessary. So just keep using
32bit for 'sync_io'.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240507023103.781816-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The chips supported by the emc1403 driver support configurable
conversion rates. Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Various temperature and limit registers support 11 bit accuracy.
Add support for it.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert driver to register with the hwmon subsystem using
devm_hwmon_device_register_with_info() instead of
devm_hwmon_device_register_with_groups() to simplify the code
and to reduce its size. As side effect, this also fixes a couple
of overflow problems when writing limit and hysteresis registers.
Cc: Lars Petter Mostad <lars.petter.mostad@appear.net>
Tested-by: Lars Petter Mostad <lars.petter.mostad@appear.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Newer processors support various MP2 register sets. Therefore, to ensure
compatibility and obtain C2P data, use the amd_get_c2p_val().
Co-developed-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <patreddy@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Resume or suspend each sensor device based on the num_hid_devices.
Therefore, add a check to handle the special case where no sensors are
present.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Modify log messages, but only log errors when sensors are missing or a
true failure occurs to avoid misleading "failed" messages.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Change device type because
a. it is exactly a mouse, with left/right buttons and scroll wheel;
b. it does not have visible marks or crosshairs, thus does not provide
higher accuracy than stylus.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
make C=1 currently gives the following warning:
drivers/cpufreq/intel_pstate.c:262: warning: Function parameter or struct member 'epp_cached' not described in 'cpudata'
Add the missing ":" to fix the trivial kernel-doc syntax error.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain
|
|
make C=1 reports:
warning: Function parameter or struct member 'dev' not described in 'ladder_do_selection'
Document 'dev' for this function.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_parse_memory_affinity()
After removing architectural code the helper function
acpi_numa_memory_affinity_init() is no longer needed. Squash it into
acpi_parse_memory_affinity(). No functional changes intended.
While at it, fixing checkpatch complaints in code moved.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403220943.96dde419-oliver.sang@intel.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After removing architectural code the helper function
acpi_numa_slit_init() is no longer needed. Squash it into
acpi_parse_slit(). No functional changes intended.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
With the removal of the Itanium architecture [1] the last architecture
dependent functions:
acpi_numa_slit_init(), acpi_numa_memory_affinity_init()
were removed. Remove its remainings in the header files too and make
them static.
[1] commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For configurations that have the kconfig option NUMA_KEEP_MEMINFO
disabled, numa_fill_memblks() only returns with NUMA_NO_MEMBLK (-1).
SRAT lookup fails then because an existing SRAT memory range cannot be
found for a CFMWS address range. This causes the addition of a
duplicate numa_memblk with a different node id and a subsequent page
fault and kernel crash during boot.
Fix this by making numa_fill_memblks() always available regardless of
NUMA_KEEP_MEMINFO.
As Dan suggested, the fix is implemented to remove numa_fill_memblks()
from sparsemem.h and alos using __weak for the function.
Note that the issue was initially introduced with [1]. But since
phys_to_target_node() was originally used that returned the valid node
0, an additional numa_memblk was not added. Though, the node id was
wrong too, a message is seen then in the logs:
kernel/numa.c: pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
[1] commit fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each
CFMWS not in SRAT")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/all/66271b0072317_69102944c@dwillia2-xfh.jf.intel.com.notmuch/
Fixes: 8f1004679987 ("ACPI/NUMA: Apply SRAT proximity domain to entire CFMWS window")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Lenovo Slim 7 16ARH7 is a machine with switchable graphics between AMD
and Nvidia, and the backlight can't be adjusted properly unless
acpi_backlight=native is passed. Although nvidia-wmi-backlight is
present and loaded, this doesn't work as expected at all.
For making it working as default, add the corresponding quirk entry
with a DMI matching "LENOVO" "82UX".
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217750
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When IOMMU is on, the actual synchronization happens in the same cases
as with the direct DMA. Advertise %DMA_F_CAN_SKIP_SYNC in IOMMU DMA to
skip sync ops calls (indirect) for non-SWIOTLB buffers.
perf profile before the patch:
18.53% [kernel] [k] gq_rx_skb
14.77% [kernel] [k] napi_reuse_skb
8.95% [kernel] [k] skb_release_data
5.42% [kernel] [k] dev_gro_receive
5.37% [kernel] [k] memcpy
<*> 5.26% [kernel] [k] iommu_dma_sync_sg_for_cpu
4.78% [kernel] [k] tcp_gro_receive
<*> 4.42% [kernel] [k] iommu_dma_sync_sg_for_device
4.12% [kernel] [k] ipv6_gro_receive
3.65% [kernel] [k] gq_pool_get
3.25% [kernel] [k] skb_gro_receive
2.07% [kernel] [k] napi_gro_frags
1.98% [kernel] [k] tcp6_gro_receive
1.27% [kernel] [k] gq_rx_prep_buffers
1.18% [kernel] [k] gq_rx_napi_handler
0.99% [kernel] [k] csum_partial
0.74% [kernel] [k] csum_ipv6_magic
0.72% [kernel] [k] free_pcp_prepare
0.60% [kernel] [k] __napi_poll
0.58% [kernel] [k] net_rx_action
0.56% [kernel] [k] read_tsc
<*> 0.50% [kernel] [k] __x86_indirect_thunk_r11
0.45% [kernel] [k] memset
After patch, lines with <*> no longer show up, and overall
cpu usage looks much better (~60% instead of ~72%):
25.56% [kernel] [k] gq_rx_skb
9.90% [kernel] [k] napi_reuse_skb
7.39% [kernel] [k] dev_gro_receive
6.78% [kernel] [k] memcpy
6.53% [kernel] [k] skb_release_data
6.39% [kernel] [k] tcp_gro_receive
5.71% [kernel] [k] ipv6_gro_receive
4.35% [kernel] [k] napi_gro_frags
4.34% [kernel] [k] skb_gro_receive
3.50% [kernel] [k] gq_pool_get
3.08% [kernel] [k] gq_rx_napi_handler
2.35% [kernel] [k] tcp6_gro_receive
2.06% [kernel] [k] gq_rx_prep_buffers
1.32% [kernel] [k] csum_partial
0.93% [kernel] [k] csum_ipv6_magic
0.65% [kernel] [k] net_rx_action
iavf yields +10% of Mpps on Rx. This also unblocks batched allocations
of XSk buffers when IOMMU is active.
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
iommu_dma_map_page() allocates swiotlb memory as a bounce buffer when an
untrusted device wants to map only part of the memory in an granule. The
goal is to disallow the untrusted device having DMA access to unrelated
kernel data that may be sharing the granule. To meet this goal, the
bounce buffer itself is zeroed, and any additional swiotlb memory up to
alloc_size after the bounce buffer end (i.e., "post-padding") is also
zeroed.
However, as of commit 901c7280ca0d ("Reinstate some of "swiotlb: rework
"fix info leak with DMA_FROM_DEVICE"""), swiotlb_tbl_map_single() always
initializes the contents of the bounce buffer to the original memory.
Zeroing the bounce buffer is redundant and probably wrong per the
discussion in that commit. Only the post-padding needs to be zeroed.
Also, when the DMA min_align_mask is non-zero, the allocated bounce
buffer space may not start on a granule boundary. The swiotlb memory
from the granule boundary to the start of the allocated bounce buffer
might belong to some unrelated bounce buffer. So as described in the
"second issue" in [1], it can't be zeroed to protect against untrusted
devices. But as of commit af133562d5af ("swiotlb: extend buffer
pre-padding to alloc_align_mask if necessary"), swiotlb_tbl_map_single()
allocates pre-padding slots when necessary to meet min_align_mask
requirements, making it possible to zero the pre-padding area as well.
Finally, iommu_dma_map_page() uses the swiotlb for untrusted devices
and also for certain kmalloc() memory. Current code does the zeroing
for both cases, but it is needed only for the untrusted device case.
Fix all of this by updating iommu_dma_map_page() to zero both the
pre-padding and post-padding areas, but not the actual bounce buffer.
Do this only in the case where the bounce buffer is used because
of an untrusted device.
[1] https://lore.kernel.org/all/20210929023300.335969-1-stevensd@google.com/
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently swiotlb_tbl_map_single() takes alloc_align_mask and
alloc_size arguments to specify an swiotlb allocation that is larger
than mapping_size. This larger allocation is used solely by
iommu_dma_map_single() to handle untrusted devices that should not have
DMA visibility to memory pages that are partially used for unrelated
kernel data.
Having two arguments to specify the allocation is redundant. While
alloc_align_mask naturally specifies the alignment of the starting
address of the allocation, it can also implicitly specify the size
by rounding up the mapping_size to that alignment.
Additionally, the current approach has an edge case bug.
iommu_dma_map_page() already does the rounding up to compute the
alloc_size argument. But swiotlb_tbl_map_single() then calculates the
alignment offset based on the DMA min_align_mask, and adds that offset to
alloc_size. If the offset is non-zero, the addition may result in a value
that is larger than the max the swiotlb can allocate. If the rounding up
is done _after_ the alignment offset is added to the mapping_size (and
the original mapping_size conforms to the value returned by
swiotlb_max_mapping_size), then the max that the swiotlb can allocate
will not be exceeded.
In view of these issues, simplify the swiotlb_tbl_map_single() interface
by removing the alloc_size argument. Most call sites pass the same value
for mapping_size and alloc_size, and they pass alloc_align_mask as zero.
Just remove the redundant argument from these callers, as they will see
no functional change. For iommu_dma_map_page() also remove the alloc_size
argument, and have swiotlb_tbl_map_single() compute the alloc_size by
rounding up mapping_size after adding the offset based on min_align_mask.
This has the side effect of fixing the edge case bug but with no other
functional change.
Also add a sanity test on the alloc_align_mask. While IOMMU code
currently ensures the granule is not larger than PAGE_SIZE, if that
guarantee were to be removed in the future, the downstream effect on the
swiotlb might go unnoticed until strange allocation failures occurred.
Tested on an ARM64 system with 16K page size and some kernel test-only
hackery to allow modifying the DMA min_align_mask and the granule size
that becomes the alloc_align_mask. Tested these combinations with a
variety of original memory addresses and sizes, including those that
reproduce the edge case bug:
* 4K granule and 0 min_align_mask
* 4K granule and 0xFFF min_align_mask (4K - 1)
* 16K granule and 0xFFF min_align_mask
* 64K granule and 0xFFF min_align_mask
* 64K granule and 0x3FFF min_align_mask (16K - 1)
With the changes, all combinations pass.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Drop static const arrays with HSI2 clocks parent data which are not
referenced by any clock. This might cause -Werror=unused-const-variable
warnings.
Reported-by: Stephen Boyd <sboyd@kernel.org>
Closes: https://lore.kernel.org/all/8bf65df598680f0785c3d6db70acfb9a.sboyd@kernel.org/
Fixes: 093c290084a4 ("clk: samsung: gs101: add support for cmu_hsi2")
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507055948.34554-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The rtnl lock is no longer needed to protect the control buffer and
command VQ.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Once the RTNL locking around the control buffer is removed there can be
contention on the per queue RX interrupt coalescing data. Use a mutex
per queue. A mutex is required because virtnet_send_command can sleep.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since we no longer have to hold the RTNL lock here just do updates for
the specified queue.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The command VQ will no longer be protected by the RTNL lock. Use a
mutex to protect the control buffer header and the VQ.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allocate memory for the data when it's used. Ideally the struct could
be on the stack, but we can't DMA stack memory. With this change only
the header and status memory are shared between commands, which will
allow using a tighter lock than RTNL.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Stop storing RSS setting in the control buffer. This is prep work for
removing RTNL lock protection of the control buffer.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Tested-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide
direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO
bus the switch listens on. The PHY muxing feature makes use of this.
This is problematic as the PHY may be attached before the switch is
initialised, in which case, the PHY will fail to be attached.
Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration
of switch MDIO bus"), we can describe the switch PHYs on the MDIO bus of
the switch on the device tree. Extend the check to detect PHY muxing when
the PHY is defined on the MDIO bus of the switch on the device tree.
When the PHY is described this way, the switch will be initialised first,
then the switch MDIO bus will be registered. Only after these steps, the
PHY will be attached.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240430-b4-for-netnext-mt7530-use-switch-mdio-bus-for-phy-muxing-v2-1-9104d886d0db@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
All rtnl_link_ops->get_link_net() methods already using dev_net()
are ready. I added READ_ONCE() annotations on others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When calling qede_flow_parse_ports(), then the
return code was only used for a non-zero check,
and then -EINVAL was returned.
qede_flow_parse_ports() can currently fail with:
* -EINVAL
This patch changes qede_flow_parse_v{4,6}_common() to
use the actual return code from qede_flow_parse_ports(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When calling qede_flow_spec_validate_unused() then
the return code was only used for a non-zero check,
and then -EOPNOTSUPP was returned.
qede_flow_spec_validate_unused() can currently fail with:
* -EOPNOTSUPP
This patch changes qede_flow_spec_to_rule() to use the
actual return code from qede_flow_spec_validate_unused(),
so it's no longer assumed that all errors are -EOPNOTSUPP.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In qede_flow_spec_to_rule(), when calling
qede_parse_actions() then the return code
was only used for a non-zero check, and then
-EINVAL was returned.
qede_parse_actions() can currently fail with:
* -EINVAL
* -EOPNOTSUPP
Commit 319a1d19471e ("flow_offload: check for
basic action hw stats type") broke the implicit
assumption that it could only fail with -EINVAL,
by changing it to return -EOPNOTSUPP, when hardware
stats are requested.
However AFAICT it's not possible to trigger
qede_parse_actions() to return -EOPNOTSUPP, when
called from qede_flow_spec_to_rule(), as hardware
stats can't be requested by ethtool_rx_flow_rule_create().
This patch changes qede_flow_spec_to_rule() to use
the actual return code from qede_parse_actions(),
so it's no longer assumed that all errors are -EINVAL.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This label was left behind when the wake-up logic was moved from
i2c_hid_set_power to i2c_hid_probe_address. Clean it up as it causes
warnings-as-errors builds to fail.
Fixes: bb1033c8a3ea ("HID: i2c-hid: Use address probe to wake on resume")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
