summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29thermal: power_allocator: allocate with kcalloc what you free with kfreeJavi Merino
Commit cf736ea6f902 ("thermal: power_allocator: do not use devm* interfaces") forgot to change a devm_kcalloc() to just kcalloc(), but it's corresponding devm_kfree() was changed to kfree(). Allocate with kcalloc() to match the kfree(). Fixes: cf736ea6f902 ("thermal: power_allocator: do not use devm* interfaces") Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-29regulator: pfuze100: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas
The driver has a I2C device id table that is used to create the modaliases and also "pfuze100-regulator" is not a supported I2C id, so is never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28bonding: fix bond_poll_controller bh_enable warningNikolay Aleksandrov
The problem is rcu_read_unlock_bh() which triggers a warning when irqs are disabled. ndo_poll_controller should run with irqs disabled always so we can drop the rcu_read_lock_bh. [ 98.502922] bond0: making interface eth1 the new active one [ 98.503039] ------------[ cut here ]------------ [ 98.503039] WARNING: CPU: 0 PID: 1744 at kernel/softirq.c:150 __local_bh_enable_ip+0x96/0xc0() [ 98.503039] Modules linked in: bonding(OE) rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache netconsole ppdev joydev parport_pc serio_raw parport i2c_piix4 video acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc virtio_net e1000 ata_generic pcnet32 mii virtio_pci virtio_ring virtio pata_acpi [ 98.503039] CPU: 0 PID: 1744 Comm: ifenslave Tainted: G OE 4.2.0-rc7+ #56 [ 98.503039] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 98.503039] 0000000000000000 00000000e96ba230 ffff880020c236b8 ffffffff8183f105 [ 98.503039] 0000000000000000 0000000000000000 ffff880020c236f8 ffffffff810a9496 [ 98.503039] ffff88002ea99e08 0000000000000200 ffffffffa02a8e06 ffff88002ea99e08 [ 98.503039] Call Trace: [ 98.503039] [<ffffffff8183f105>] dump_stack+0x4c/0x65 [ 98.503039] [<ffffffff810a9496>] warn_slowpath_common+0x86/0xc0 [ 98.503039] [<ffffffffa02a8e06>] ? bond_poll_controller+0x146/0x250 [bonding] [ 98.503039] [<ffffffff810a95ca>] warn_slowpath_null+0x1a/0x20 [ 98.503039] [<ffffffff810ae376>] __local_bh_enable_ip+0x96/0xc0 [ 98.503039] [<ffffffffa02a8e2f>] bond_poll_controller+0x16f/0x250 [bonding] [ 98.503039] [<ffffffffa02a8cf3>] ? bond_poll_controller+0x33/0x250 [bonding] [ 98.503039] [<ffffffff810feaed>] ? trace_hardirqs_off+0xd/0x10 [ 98.503039] [<ffffffff81848afb>] ? _raw_spin_unlock_irqrestore+0x5b/0x60 [ 98.503039] [<ffffffff816ec48e>] netpoll_poll_dev+0x6e/0x350 [ 98.503039] [<ffffffff816eb977>] ? netpoll_start_xmit+0x137/0x1d0 [ 98.503039] [<ffffffff816b2e8b>] ? __alloc_skb+0x5b/0x210 [ 98.503039] [<ffffffff816ec89d>] netpoll_send_skb_on_dev+0x12d/0x2a0 [ 98.503039] [<ffffffff816eccde>] netpoll_send_udp+0x2ce/0x430 [ 98.503039] [<ffffffffa0190850>] write_msg+0xb0/0xf0 [netconsole] [ 98.503039] [<ffffffff81116b63>] call_console_drivers.constprop.25+0x133/0x260 [ 98.503039] [<ffffffff81117934>] console_unlock+0x2f4/0x580 [ 98.503039] [<ffffffff81117ea5>] ? vprintk_emit+0x2e5/0x630 [ 98.503039] [<ffffffff81117ee5>] vprintk_emit+0x325/0x630 [ 98.503039] [<ffffffff81118379>] vprintk_default+0x29/0x40 [ 98.503039] [<ffffffff8183de4f>] printk+0x55/0x6b [ 98.503039] [<ffffffff816c754c>] __netdev_printk+0x16c/0x260 [ 98.503039] [<ffffffff816c7a12>] netdev_info+0x62/0x80 [ 98.503039] [<ffffffffa02ab464>] bond_change_active_slave+0x134/0x6a0 [bonding] [ 98.503039] [<ffffffffa02aba95>] bond_select_active_slave+0xc5/0x310 [bonding] [ 98.503039] [<ffffffffa02aeb78>] bond_enslave+0x1088/0x10c0 [bonding] [ 98.503039] [<ffffffffa02af46b>] bond_do_ioctl+0x37b/0x400 [bonding] [ 98.503039] [<ffffffff81101d8d>] ? trace_hardirqs_on+0xd/0x10 [ 98.503039] [<ffffffff816dc437>] ? rtnl_lock+0x17/0x20 [ 98.503039] [<ffffffff816e5fd1>] dev_ifsioc+0x331/0x3e0 [ 98.503039] [<ffffffff816e62dc>] dev_ioctl+0xec/0x6c0 [ 98.503039] [<ffffffff816a6c6a>] sock_do_ioctl+0x4a/0x60 [ 98.503039] [<ffffffff816a7300>] sock_ioctl+0x1c0/0x250 [ 98.503039] [<ffffffff81271bfe>] do_vfs_ioctl+0x2ee/0x540 [ 98.503039] [<ffffffff810fd943>] ? up_read+0x23/0x40 [ 98.503039] [<ffffffff81070993>] ? __do_page_fault+0x1d3/0x420 [ 98.503039] [<ffffffff8127e246>] ? __fget_light+0x66/0x90 [ 98.503039] [<ffffffff81271ec9>] SyS_ioctl+0x79/0x90 [ 98.503039] [<ffffffff8184936e>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 98.503039] ---[ end trace 00cfa804b0670051 ]--- Fixes: 616f45416ca0 ("bonding: implement bond_poll_controller()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28sh_eth: propagate platform_get_irq() error upstreamSergei Shtylyov
The driver overrides the error returned by platform_get_irq() with -ENODEV which e.g. precludes the deferred probing from working. Propagate the real error code to the driver core instead. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28ravb: propagate platform_get_irq() error upstreamSergei Shtylyov
The driver overrides the error returned by platform_get_irq() with -ENODEV which e.g. precludes the deferred probing from working. Propagate the real error code to the driver core instead. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28libnvdimm, pmem: direct map legacy pmem by defaultDan Williams
The expectation is that the legacy / non-standard pmem discovery method (e820 type-12) will only ever be used to describe small quantities of persistent memory. Larger capacities will be described via the ACPI NFIT. When "allocate struct page from pmem" support is added this default policy can be overridden by assigning a legacy pmem namespace to a pfn device, however this would be only be necessary if a platform used the legacy mechanism to define a very large range. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-28libnvdimm, pmem: 'struct page' for pmemDan Williams
Enable the pmem driver to handle PFN device instances. Attaching a pmem namespace to a pfn device triggers the driver to allocate and initialize struct page entries for pmem. Memory capacity for this allocation comes exclusively from RAM for now which is suitable for low PMEM to RAM ratios. This mechanism will be expanded later for setting an "allocate from PMEM" policy. Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-28libnvdimm, pfn: 'struct page' provider infrastructureDan Williams
Implement the base infrastructure for libnvdimm PFN devices. Similar to BTT devices they take a namespace as a backing device and layer functionality on top. In this case the functionality is reserving space for an array of 'struct page' entries to be handed out through pfn_to_page(). For now this is just the basic libnvdimm-device-model for configuring the base PFN device. As the namespace claiming mechanism for PFN devices is mostly identical to BTT devices drivers/nvdimm/claim.c is created to house the common bits. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-28Input: max8997_haptic - fix module aliasJavier Martinez Canillas
The driver is a platform driver and not a I2C driver so its modalias should be exported with MODULE_DEVICE_TABLE(platform,...) instead of MODULE_DEVICE_TABLE(i2c,...). Also, remove the unnecessary MODULE_ALIAS("platform:max8997-haptic") now that the correct module alias is created. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-28Input: elan_i2c - fix typos for validpage_countBenson Leung
Search for "vaildpage_count" and replace with "validpage_count". Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-29PM / Domains: Fix typo in description of genpd_dev_pm_detach()Jon Hunter
The function genpd_dev_pm_detach() detaches a device from a PM domain, however, in the description, the "dev" argument for the function is described as the device to "attach" instead of "detach". Correct this. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29PM / Domains: Make pm_genpd_init() available to modulesRajendra Nayak
Export symbol pm_genpd_init so it can be used in loadable kernel modules Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29PM / domains: Align column headers and data in pm_genpd_summary outputGeert Uytterhoeven
"domain": header is indented by 4, data by 0 spaces => 0 spaces "/device": header is indented by 11, data by 4 spaces => 4 spaces "slaves": header is indented by 47, data by 49 spaces => 48 spaces Ruler: 1234567890123456789012345678901234567890123456789012345678901234567890 Before: domain status slaves /device runtime status ---------------------------------------------------------------------- a3sp on a2us /devices/platform/e60b0000.i2c suspended After: domain status slaves /device runtime status ---------------------------------------------------------------------- a3sp on a2us /devices/platform/e60b0000.i2c suspended Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-29powercap / RAPL: disable the 2nd power limit properlySeiichi Ikarashi
Let rapl_unregister_powercap() disable the second power limit only if it exists. Intel64 SDM Vol.3 14.9 says that the package domain has it but neither the power plane domain nor the DRAM domain has it. Signed-off-by: Seiichi Ikarashi <s.ikarashi@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-28phylib: simplify NULL checksSergei Shtylyov
Fix scripts/checkpatch.pl's messages like: CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect" BTW, it doesn't detect the reversed comparisons (which I've fixed as well). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28phylib: simplify bogus phy_device_create() resultSergei Shtylyov
Get rid of the bogus string of type casts where ERR_PTR() is enough. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28sfc: Allow driver to cope with a lower number of VIs than it needs for RSSShradha Shah
Previously, the driver would refuse to load if it couldn't secure enough VIs from the MC to fulfill its RSS requirements. This was causing probe to fail on later functions in configurations where we'd run out of VIs, such as having many VFs. This change allows the driver to load with fewer VIs, down to a minimum of 2. A warning will be printed saying that RSS requirements were not met, possibly affecting performance. efx->max_tx_channels needs to be set to avoid going down the failure path in efx_probe_nic() immediately in the loop after the probe() NIC-type function. Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack of VIs. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Merge branches 'pci/enumeration' and 'pci/misc' into nextBjorn Helgaas
* pci/enumeration: PCI: Set MPS to match upstream bridge PCI: Move MPS configuration check to pci_configure_device() PCI: Drop references acquired by of_parse_phandle() PCI/MSI: Remove unused pcibios_msi_controller() hook ARM/PCI: Remove msi_controller from struct pci_sys_data ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() PCI: Add pci_scan_root_bus_msi() ARM/PCI: Replace panic with WARN messages on failures PCI: generic: Add arm64 support PCI: Build setup-irq.o for arm64 PCI: generic: Remove dependency on ARM-specific struct hw_pci ARM/PCI: Set MPS before pci_bus_add_devices() * pci/misc: PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
2015-08-28cxgb4: Force uninitialized state if FW in adapter is unsupportedHariprasad Shenai
Forcing uninitialized state allows us to upgrade and reinitialize the adapter. FW_VERSION_T4 = 1.4.0.0 FW_VERSION_T5 = 0.0.0.0 FW_VERSION_T6 = 0.0.0.0 At this point driver supports above and greater than above version. If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW If FW in adapter >= FW_VERSION driver supports then it follows normal path Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net: Add ethernet header for pass through VRF deviceDavid Ahern
The change to use a custom dst broke tcpdump captures on the VRF device: $ tcpdump -n -i vrf10 ... 05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64 05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84: 0x0000: 0102 0a02 01fe 0000 9181 55e5 0001 bd11 ..........U..... 0x0010: da55 0000 0000 bb5d 0700 0000 0000 1011 .U.....]........ 0x0020: 1213 1415 1617 1819 1a1b 1c1d 1e1f 2021 ...............! 0x0030: 2223 2425 2627 2829 2a2b 2c2d 2e2f 3031 "#$%&'()*+,-./01 0x0040: 3233 3435 3637 234567 Local packets going through the VRF device are missing an ethernet header. Fix by adding one and then stripping it off before pushing back to the IP stack. With this patch you get the expected dumps: ... 05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64 05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64 ... Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28net/xen-netfront: only napi_synchronize() if runningChas Williams
If an interface isn't running napi_synchronize() will hang forever. [ 392.248403] rmmod R running task 0 359 343 0x00000000 [ 392.257671] ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88 [ 392.267644] ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40 [ 392.277524] 0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40 [ 392.287323] Call Trace: [ 392.291599] [<ffffffff81796927>] schedule+0x37/0x90 [ 392.298553] [<ffffffff8179985b>] schedule_timeout+0x14b/0x280 [ 392.306421] [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80 [ 392.314006] [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0 [ 392.322125] [<ffffffff81109d07>] msleep+0x37/0x50 [ 392.329037] [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront] [ 392.339658] [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront] [ 392.348516] [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0 [ 392.356257] [<ffffffff814e7217>] __device_release_driver+0x87/0x120 [ 392.364645] [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0 [ 392.371989] [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0 [ 392.379883] [<ffffffff814e84f0>] driver_unregister+0x30/0x70 [ 392.387495] [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20 [ 392.395908] [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront] [ 392.404877] [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230 [ 392.412804] [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71 Signed-off-by: Chas Williams <3chas3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28Bluetooth: hci_bcm: Fix crash on suspendFrederic Danis
If bcm_suspend is called whithout device opened there is a crash as it tries to use bdev->hu which is NULL. Rename bcm_device_list_lock to bcm_device_lock as it does not only apply to bcm_device_list. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28drm/amdgpu: use IB for fill_buffer instead of direct commandChunming Zhou
Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian K?nig <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-28drm/amdgpu: stop trying to suspend UVD sessions v2Christian König
Saving the current UVD state on suspend and restoring it on resume just doesn't work reliable. Just close cleanup all sessions on suspend. Ported from radeon commit "12e49feadff6d7b7ebbe852b36943a71524d8d34". v2: rebased Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
2015-08-28drm/amdgpu: add scheduler dependency callback v2Christian König
This way the scheduler doesn't wait in it's work thread any more. v2: fix race conditions Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-08-28drm/amdgpu: let the scheduler work more with jobs v2Christian König
v2: fix another race condition Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
2015-08-28drm/radeon: fix HDMI quantization_range for pre-DCE5 asicsAlex Deucher
Support for output_csc is only available on DCE5 and newer so don't mess with the HDMI quantization_range on pre-DCE5 asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=83226 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-08-28Merge branch 'for-4.2-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixlet from Tejun Heo: "Simple blacklist entry addition" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: Add factory recertified Crucial M500s to blacklist
2015-08-28Bluetooth: hci_intel: Add support for platform driverLoic Poulain
A platform device can be used to provide some specific resources in order to manage the controller. In this first patch we retrieve the reset gpio which is used to power on/off the controller. The main issue is to match the current tty with the correct pdev. In case of ACPI, we can easily find the right tty/pdev pair because they are both child of the same UART port. If controller is powered-on from the driver, we need to wait for a HCI boot event before being able to send any command. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btintel: Add MODULE_FIRMWARE entries for iBT 3.0 controllersMarcel Holtmann
The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc firmware files from linux-firmware repository. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-08-28Bluetooth: btusb: Correct typos based on checkpatch.plMinjune Kim
Signed-off-by: Minjune Kim <infinite.minjune.kim@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_intel: Add Intel baudrate configuration supportLoic Poulain
Implement the set_baudrate callback for hci_intel. - Controller requires a read Intel version command before updating its baudrate. - The operation consists in an async cmd since the controller does not respond at the same speed. - Wait 100ms to let the controller change its baudrate. - Clear RTS until we change our own UART speed Manage speed change in the setup function, we need to restore the oper speed once chip has booted on patched firmware. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: hci_uart: Fix zero len data packet reception issueLoic Poulain
Packets with a variable length value equal to zero were not received. Since no more data expected (and input buffer entirely consumed), we need to complete/forward the packet immediately instead of waiting for more data. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28Bluetooth: btmrvl: change device pointer passed to dev_coredumpvShengzhen Li
This change ensures we will get driver name as 'btmrvl_sdio' in udev event. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-28HID: wacom: wacom_setup_numbered_buttons is local to wacom_wacJiri Kosina
wacom_setup_numbered_buttons() is not used outside of wacom_wac.c, make it static. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Add support for Express Key Remote.Aaron Skomra
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28HID: wacom: Set button bits based on a new numbered_buttonsAaron Skomra
Prior to this commit, numbered button bit setting was done separately for each device type in wacom_setup_pad_capabilities(). Here we add a numbered_buttons property to the wacom_features struct and extract the repeated bit setting code to a new function: wacom_settup_numbered_buttons(). Signed-off-by: Aaron Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-28acer-wmi: No rfkill on HP Omen 15 wifiMichael Powell
Prevents acer-wmi from blocking wifi on HP Omen 15 laptops Signed-off-by: Michael Powell <michael_powell@mentor.com> [david.ward@ll.mit.edu: Resubmitted clean patch] Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-28thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macroJoe Perches
vdbg_printk when not using CONFIG_THINKPAD_ACPI_DEBUG uses no_printk which produces no logging output but always evaluates arguments. Change the macro to surround the no_printk call with do { if (0) no_printk(...); } while (0) to avoid the unnecessary argument evaluations. $ size drivers/platform/x86/thinkpad_acpi.o* text data bss dec hex filename 60918 6184 824 67926 10956 drivers/platform/x86/thinkpad_acpi.o.new 60927 6184 824 67935 1095f drivers/platform/x86/thinkpad_acpi.o.old Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-08-28regulator: core: use debug level print in regulator_check_drmsArchit Taneja
When calling regulator_set_load, regulator_check_drms prints and returns an error if the regulator device's flag REGULATOR_CHANGE_DRMS isn't set. drms_uA_update, however, bails out without reporting an error. Replace the error print with a debug level print so that we don't get such prints when the underlying regulator doesn't support DRMS. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28drm/i915: set CDCLK if DPLL0 enabled during resuming from S3Gary Wang
Since BIOS RC 1.4 it would enable CDCLK PLL during BIOS S3 resume, then driver needs to set CDCLK to avoid display corruption if DPLL0 enabled. References: https://bugs.freedesktop.org/show_bug.cgi?id=91697 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiong Y Zhang <xiong.y.zhang@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-08-28spi/xlp: SPI controller driver for Netlogic XLP SoCsKamlakant Patel
Add SPI Master controller driver for the SPI interface on XLP8XX, XLP3XX, XLP2XX, XLP9XX and XLP5XX family of Netlogic XLP MIPS64 processors. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-espi: add runtime PMHeiner Kallweit
Add runtime PM and use autosuspend instead of suspending the SPI controller after each transfer. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-(e)spi: simplify cleanup codeHeiner Kallweit
Now that most cleanup is done automatically the remove functions can be significantly simplified. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanupHeiner Kallweit
Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-28PM / OPP: Fix static checker warning (broken 64bit big endian systems)Viresh Kumar
Dan Carpenter reported (generated with static checker): drivers/base/power/opp.c:949 _opp_add_static_v2() warn: passing casted pointer '&new_opp->clock_latency_ns' to 'of_property_read_u32()' 64 vs 32. This code will break on 64 bit, big endian machines. Fix this by reading the value in a u32 type variable first and then assigning it to the unsigned long variable. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-28cpuidle/coupled: Remove redundant 'dev' argument of cpuidle_state_is_coupled()Xunlei Pang
For cpuidle_state_is_coupled(), 'dev' is not used, so remove it. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-29 09:40:47 +0000