| Age | Commit message (Collapse) | Author |
|---|
|
In null_add_dev(), if an error happen after initializing the resources
for a zoned null block device, we must free these resources before
exiting the function. To ensure this, move the out_cleanup_zone label
after out_cleanup_disk as we jump to this latter label if an error
happens after calling null_init_zoned_dev().
Fixes: e440626b1caf ("null_blk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240330005300.1503252-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 73d9629e1c8c ("i40e: Do not allow untrusted VF to remove
administratively set MAC") fixed an issue where untrusted VF was
allowed to remove its own MAC address although this was assigned
administratively from PF. Unfortunately the introduced check
is wrong because it causes that MAC filters for other MAC addresses
including multi-cast ones are not removed.
<snip>
if (ether_addr_equal(addr, vf->default_lan_addr.addr) &&
i40e_can_vf_change_mac(vf))
was_unimac_deleted = true;
else
continue;
if (i40e_del_mac_filter(vsi, al->list[i].addr)) {
...
</snip>
The else path with `continue` effectively skips any MAC filter
removal except one for primary MAC addr when VF is allowed to do so.
Fix the check condition so the `continue` is only done for primary
MAC address.
Fixes: 73d9629e1c8c ("i40e: Do not allow untrusted VF to remove administratively set MAC")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may
return NULL as ptp_header due to abnormal packet type or corrupted packet.
Fix this bug by adding ptp_header check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240329061631.33199-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In "struct st_ahci_drv_data", the 'ahci' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Fix the typo in the name of dp_display_handle_port_status_changed().
Fixes: c58eb1b54fee ("drm/msm/dp: fix connect/disconnect handled at irq_hpd")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/581746/
Link: https://lore.kernel.org/r/20240306193515.455388-1-quic_abhinavk@quicinc.com
|
|
When a dev command times out in MCQ mode, a successfully cleared command
should cause a retry. However, because we currently return 0, the caller
considers the command a success which causes the following error to be
logged: "Invalid offset 0x0 in descriptor IDN 0x9, length 0x0".
Retry if clearing the command was successful.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240328111244.3599-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes
(from 128). In libsas, this will cause SMP requests to be 8-byte aligned
through kmalloc() allocation. However, for hisi_sas hardware, all command
addresses must be 16-byte-aligned. Otherwise, the commands fail to be
executed.
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA
operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request.
Link: https://lkml.kernel.org/r/20230612153201.554742-1-catalin.marinas@arm.com [1]
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20240328090626.621147-1-liyihang9@huawei.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
"if device_add() succeeds, you should call device_del() when you want to
get rid of it."
In sd_probe(), device_add_disk() fails when device_add() has already
succeeded, so change put_device() to device_unregister() to ensure device
resources are released.
Fixes: 2a7a891f4c40 ("scsi: sd: Add error handling support for add_disk()")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20231208082335.1754205-1-linan666@huaweicloud.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When wl suspend error occurs, for example BKOP or SSU timeout, the host
triggers an error handler and returns -EBUSY to break the wl suspend
process. However, it is possible for the runtime PM to enter wl suspend
again before the error handler has finished, and return -EINVAL because the
device is in an error state. To address this, ensure that the rumtime PM
waits for the error handler to finish, or trigger the error handler in such
cases, because returning -EINVAL can cause the I/O to hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240329015036.15707-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The myrb and myrs drivers use an odd way of implementing their sysfs files,
calling snprintf() with a fixed length of 32 bytes to print into a page
sized buffer. One of the strings is actually longer than 32 bytes, which
clang can warn about:
drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation]
These could all be plain sprintf() without a length as the buffer is always
long enough. On the other hand, sysfs files should not be overly long
either, so just double the length to make sure the longest strings don't
get truncated here.
Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-8-arnd@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sensible
There is little point in using %ps to print a value known to be NULL. On
the other hand it makes sense to print the callback symbol in the
'invalid IRQ' message. Correct those two error messages to make more
sense.
Fixes: 6893199183f8 ("drm/msm/dpu: stop using raw IRQ indices in the kernel output")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/585565/
Link: https://lore.kernel.org/r/20240330-dpu-irq-messages-v1-1-9ce782ae35f9@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"This fixes a regression intoduced by an off-by-one in v6.9-rc1 making
the pwm-pxa and the pwm driver in ti-sn65dsi86 unusable for most
consumer drivers because the default period wasn't set"
* tag 'pwm/for-6.9-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Fix setting period with #pwm-cells = <1> and of_pwm_single_xlate()
|
|
While studying the code I've bumped into a small typo within the
kernel-doc for two functions, apparently, due to copy-paste.
This commit fixes "sizo" word to be "size".
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: b3daa5ef52c2 ("drm: Add helper for DP++ adaptors")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119102215.201474-1-oleksandr@natalenko.name
|
|
PCI core in pci_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:
In file included from include/linux/string.h:369,
from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
97 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
620 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
1184 | memcpy(buffer, __io_virt(addr), size);
| ^~~~~~
The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.
Replace the complex calculation with a more readable min() variant
that avoids the warning.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Fix more issues in the AMD FMPM driver
* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS: Avoid build errors when CONFIG_DEBUG_FS=n
RAS/AMD/FMPM: Safely handle saved records of various sizes
RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an unused function warning on irqchip/irq-armada-370-xp
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-370-xp: Suppress unused-function warning
genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
|
|
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A fix from Andi for I2C host drivers"
* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of small USB fixes for reported problems and
regressions for 6.9-rc2. Included in here are:
- deadlock fixes for long-suffering issues
- USB phy driver revert for reported problem
- typec fixes for reported problems
- duplicate id in dwc3 dropped
- dwc2 driver fixes
- udc driver warning fix
- cdc-wdm race bugfix
- other tiny USB bugfixes
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: core: Fix deadlock in port "disable" sysfs attribute
USB: core: Add hub_get() and hub_put() routines
usb: typec: ucsi: Check capabilities before cable and identity discovery
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
usb: typec: ucsi_acpi: Refactor and fix DELL quirk
usb: typec: ucsi: Ack unsupported commands
usb: typec: ucsi: Check for notifications after init
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
usb: typec: Return size of buffer if pd_set operation succeeds
usb: udc: remove warning when queue disabled ep
usb: dwc3: pci: Drop duplicate ID
usb: dwc3: Properly set system wakeup
Revert "usb: phy: generic: Get the vbus supply"
usb: cdc-wdm: close race between read and workqueue
usb: dwc2: gadget: LPM flow fix
usb: dwc2: gadget: Fix exiting from clock gating
usb: dwc2: host: Fix ISOC flow in DDMA mode
usb: dwc2: host: Fix remote wakeup from hibernation
usb: dwc2: host: Fix hibernation flow
USB: core: Fix deadlock in usb_deauthorize_interface()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for the vc04_services driver
that resolve reported problems:
- strncpy fix for information leak
- another information leak discovered by the previous strncpy fix
Both of these have been in linux-next all this past week with no
reported issues"
* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vc04_services: fix information leak in create_component()
staging: vc04_services: changen strncpy() to strscpy_pad()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and
then mostly scattered around. rc3 might be quieter with the holidays
but we shall see.
bridge:
- select DRM_KMS_HELPER
dma-buf:
- fix NULL-pointer deref
dp:
- fix div-by-zero in DP MST unplug code
fbdev:
- select FB_IOMEM_FOPS for SBus
sched:
- fix NULL-pointer deref
xe:
- Fix build on mips
- Fix wrong bound checks
- Fix use of msec rather than jiffies
- Remove dead code
amdgpu:
- SMU 14.0.1 updates
- DCN 3.5.x updates
- VPE fix
- eDP panel flickering fix
- Suspend fix
- PSR fix
- DCN 3.0+ fix
- VCN 4.0.6 updates
- debugfs fix
amdkfd:
- DMA-Buf fix
- GFX 9.4.2 TLB flush fix
- CP interrupt fix
i915:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c
- Update a MTL workaround
- Fix locking inversion in hwmon's sysfs
- Remove a bogus error message around PXP
- Fix UAF on VMA
- Reset queue_priority_hint on parking
- Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP
- Disable AuxCCS for Xe driver
- Revert init order of MIPI DSI
- DRRS debugfs fix with an extra refactor patch
- VRR related fixes
- Fix a JSL eDP corruption
- Fix the cursor physical dma address
- BIOS VBT related fix
nouveau:
- dmem: handle kcalloc() allocation failures
qxl:
- remove unused variables
rockchip:
- vop2: remove support for AR30 and AB30 formats
vmwgfx:
- debugfs: create ttm_resource_manager entry only if needed"
* tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits)
drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode()
drm/i915: Pre-populate the cursor physical dma address
drm/i915/gt: Reset queue_priority_hint on parking
drm/i915/vma: Fix UAF on destroy against retire race
drm/i915: Do not print 'pxp init failed with 0' when it succeed
drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed()
drm/i915/hwmon: Fix locking inversion in sysfs getter
drm/i915/dsb: Fix DSB vblank waits when using VRR
drm/i915/vrr: Generate VRR "safe window" for DSB
drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status
drm/i915/drrs: Refactor CPU transcoder DRRS check
drm/i915/mtl: Update workaround 14018575942
drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly
drm/i915/display: Disable AuxCCS framebuffers if built for Xe
drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP
drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c
drm/qxl: remove unused variable from `qxl_process_single_command()`
drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()`
drm/i915: add bug.h include to i915_memcpy.c
drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Bluetooth: Fix TOCTOU in HCI debugfs implementation
- Bluetooth: hci_event: set the conn encrypted before conn establishes
- Bluetooth: qca: fix device-address endianness
- Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
* tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix TOCTOU in HCI debugfs implementation
Bluetooth: hci_event: set the conn encrypted before conn establishes
Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
Bluetooth: qca: fix device-address endianness
Bluetooth: add quirk for broken address properties
arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken
dt-bindings: bluetooth: add 'qcom,local-bd-address-broken'
Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT"
====================
Link: https://lore.kernel.org/r/20240329140453.2016486-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At current x1e80100 interface table, interface #3 is wrongly
connected to DP controller #0 and interface #4 wrongly connected
to DP controller #2. Fix this problem by connect Interface #3 to
DP controller #0 and interface #4 connect to DP controller #1.
Also add interface #6, #7 and #8 connections to DP controller to
complete x1e80100 interface table.
Changs in V3:
-- add v2 changes log
Changs in V2:
-- add x1e80100 to subject
-- add Fixes
Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/585549/
Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
The data from catalog is marked as const, so it is a part of the RO
segment. Allowing userspace to write to it through debugfs can cause
protection faults. Set debugfs file mode to read-only for debug entries
corresponding to perf_cfg coming from catalog.
Fixes: abda0d925f9c ("drm/msm/dpu: Mark various data tables as const")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/582844/
Link: https://lore.kernel.org/r/20240314-dpu-perf-rework-v3-1-79fa4e065574@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
These debug prints are missing newlines, leading to multiple messages
being printed on one line and hard to read logs. Add newlines to have
the debug prints on separate lines. The DBG macro used to add a newline,
but I missed that while migrating to drm_dbg wrappers.
Fixes: 7cb017db1896 ("drm/msm: Move FB debug prints to drm_dbg_state()")
Fixes: 721c6e0c6aed ("drm/msm: Move vblank debug prints to drm_dbg_vbl()")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/584769/
Link: https://lore.kernel.org/r/20240325210810.1340820-1-swboyd@chromium.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Make sure to balance the runtime PM usage counter (and suspend) before
returning on connect failures (e.g. DPCD read failures after a spurious
connect event or if link training fails).
Fixes: 5814b8bf086a ("drm/msm/dp: incorporate pm_runtime framework into DP driver")
Cc: stable@vger.kernel.org # 6.8
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/582746/
Link: https://lore.kernel.org/r/20240313164306.23133-3-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
Make sure to put the runtime PM usage count (and suspend) also when
receiving a disconnect event while in the ST_MAINLINK_READY state.
This specifically avoids leaking a runtime PM usage count on every
disconnect with display servers that do not automatically enable
external displays when receiving a hotplug notification.
Fixes: 5814b8bf086a ("drm/msm/dp: incorporate pm_runtime framework into DP driver")
Cc: stable@vger.kernel.org # 6.8
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/582744/
Link: https://lore.kernel.org/r/20240313164306.23133-2-johan+linaro@kernel.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
|
|
On devices that support DASH, the current code in the "rtl_loop_wait" function
raises false alarms when DASH is disabled. This occurs because the function
attempts to wait for the DASH firmware to be ready, even though it's not
relevant in this case.
r8169 0000:0c:00.0 eth0: RTL8168ep/8111ep, 38:7c:76:49:08:d9, XID 502, IRQ 86
r8169 0000:0c:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
r8169 0000:0c:00.0 eth0: DASH disabled
...
r8169 0000:0c:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 30, delay: 10000).
This patch modifies the driver start/stop functions to skip checking the DASH
firmware status when DASH is explicitly disabled. This prevents unnecessary
delays and false alarms.
The patch has been tested on several ThinkStation P8/PX workstations.
Fixes: 0ab0c45d8aae ("r8169: add handling DASH when DASH is disabled")
Signed-off-by: Atlas Yu <atlas.yu@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20240328055152.18443-1-atlas.yu@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
otx2_rxtx_enable() return negative error code such as -EIO,
check -EIO rather than EIO to fix this problem.
Fixes: c926252205c4 ("octeontx2-pf: Disable packet I/O for graceful exit")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240328020620.4054692-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
Core/GT Fixes:
- Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas)
- Update a MTL workaround (Tejas)
- Fix locking inversion in hwmon's sysfs (Janusz)
- Remove a bogus error message around PXP (Jose)
- Fix UAF on VMA (Janusz)
- Reset queue_priority_hint on parking (Chris)
Display Fixes:
- Remove duplicated audio enable/disable on SDVO and DP (Ville)
- Disable AuxCCS for Xe driver (Juha-Pekka)
- Revert init order of MIPI DSI (Ville)
- DRRS debugfs fix with an extra refactor patch (Bhanuprakash)
- VRR related fixes (Ville)
- Fix a JSL eDP corruption (Jonathon)
- Fix the cursor physical dma address (Ville)
- BIOS VBT related fix (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZgYaIVgjIs30mIvS@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-26 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera resolves an issue where descriptors could be missed when
exiting busy poll.
Aleksandr corrects counting of MAC filters to only include new or active
filters and resolves possible use of incorrect/stale 'vf' variable.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix vf may be used uninitialized in this function warning
i40e: fix i40e_count_filters() to count only active/new filters
i40e: Enforce software interrupt during busy-poll exit
====================
Link: https://lore.kernel.org/r/20240326162358.1224145-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The switch has 4 ports with 2 internal PHYs, but ports are numbered up
to 6, with ports 0, 1, 5 and 6 being usable.
Fixes: 71d94a432a15 ("net: dsa: mv88e6xxx: add support for MV88E6020 switch")
Signed-off-by: Michael Krummsdorf <michael.krummsdorf@tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240326123655.40666-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These revert a problematic optimization commit and address a devfreq
cooling device issue.
Specifics:
- Revert thermal core optimization that introduced a functional issue
causing a critical trip point to be crossed in some cases (Daniel
Lezcano)
- Add missing conversion between different state ranges to the
devfreq cooling device driver (Ye Zhang)"
* tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: devfreq_cooling: Fix perf state when calculate dfc res_util
Revert "thermal: core: Don't update trip points inside the hysteresis range"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues that may lead to attempts to use memory that has
been freed already.
Specifics:
- Drop __exit annotation from einj_remove() in the ACPI APEI code
because this function can be called during runtime (Arnd Bergmann)
- Make acpi_db_walk_for_fields() check acpi_evaluate_object() return
value to avoid accessing memory that has been freed (Nikita
Kiryushin)"
* tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
ACPI: APEI: EINJ: mark remove callback as non-__exit
|
|
* acpica:
ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
|
|
This reverts commit 29a43dc130ce65d365a8ea9e1cc4bc51005a353e.
29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset") by Edmund was based
on the assumption that the LSI / Agere FW643 has a defect such that it
can't recover after a Secondary Bus Reset (SBR).
But Takashi Sakamoto reported that SBR works fine on this same FW643 device
in an AMD Ryzen 5 2400G system, so apparently there is some other aspect of
Edmund's system that accounts for the issue.
The down side of 29a43dc130ce is that when the FW643 is assigned to a VM,
avoiding the SBR means we leak data out of the VM.
Revert 29a43dc130ce until we figure out a better solution. In the
meantime, we can use the sysfs "reset_method" interface to restrict the
available reset methods.
Link: https://lore.kernel.org/r/20240328212302.1582483-1-helgaas@kernel.org
Fixes: 29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset")
Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240325012135.36861-1-o-takashi@sakamocchi.jp
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"These address all the outstanding EFI/x86 boot related regressions:
- Revert to the old initrd memory allocation soft limit of INT_MAX,
which was dropped inadvertently
- Ensure that startup_32() is entered with a valid boot_params
pointer when using the new EFI mixed mode protocol
- Fix a compiler warning introduced by a fix from the previous pull"
* tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
x86/efistub: Reinstate soft limit for initrd loading
efi/libstub: Cast away type warning in use of max()
x86/efistub: Add missing boot_params for mixed mode compat entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix MAINTAINERS to not include M: dm-devel for DM entries.
- Fix DM vdo's murmurhash to use proper byteswapping methods.
- Fix DM integrity clang warning about comparison out-of-range.
* tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix out-of-range warning
dm vdo murmurhash3: use kernel byteswapping routines instead of GCC ones
MAINTAINERS: Remove incorrect M: tag for dm-devel@lists.linux.dev
|
|
Fix warnings reported by smatch by initializing local 'ret' variable
to 0.
drivers/base/regmap/regcache-maple.c:186 regcache_maple_drop()
error: uninitialized symbol 'ret'.
drivers/base/regmap/regcache-maple.c:290 regcache_maple_sync()
error: uninitialized symbol 'ret'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f033c26de5a5 ("regmap: Add maple tree based register cache")
Link: https://lore.kernel.org/r/20240329144630.1965159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a procfs failure when requesting an interrupt with a label
containing the '/' character
- add missing stubs for GPIO lookup functions for !GPIOLIB
- fix debug messages that would print "(null)" for NULL strings
* tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix debug messaging in gpiod_find_and_request()
gpiolib: Add stubs for GPIO lookup functions
gpio: cdev: sanitize the label before requesting the interrupt
|
|
The mlxbf_gige driver intermittantly encounters a NULL pointer
exception while the system is shutting down via "reboot" command.
The mlxbf_driver will experience an exception right after executing
its shutdown() method. One example of this exception is:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000011d373000
[0000000000000070] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
CPU: 0 PID: 13 Comm: ksoftirqd/0 Tainted: G S OE 5.15.0-bf.6.gef6992a #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.0.2.12669 Apr 21 2023
pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
lr : mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
sp : ffff8000080d3c10
x29: ffff8000080d3c10 x28: ffffcce72cbb7000 x27: ffff8000080d3d58
x26: ffff0000814e7340 x25: ffff331cd1a05000 x24: ffffcce72c4ea008
x23: ffff0000814e4b40 x22: ffff0000814e4d10 x21: ffff0000814e4128
x20: 0000000000000000 x19: ffff0000814e4a80 x18: ffffffffffffffff
x17: 000000000000001c x16: ffffcce72b4553f4 x15: ffff80008805b8a7
x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101
x11: 7f7f7f7f7f7f7f7f x10: c2ac898b17576267 x9 : ffffcce720fa5404
x8 : ffff000080812138 x7 : 0000000000002e9a x6 : 0000000000000080
x5 : ffff00008de3b000 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
mlxbf_gige_handle_tx_complete+0xc8/0x170 [mlxbf_gige]
mlxbf_gige_poll+0x54/0x160 [mlxbf_gige]
__napi_poll+0x40/0x1c8
net_rx_action+0x314/0x3a0
__do_softirq+0x128/0x334
run_ksoftirqd+0x54/0x6c
smpboot_thread_fn+0x14c/0x190
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
Code: 8b070000 f9000ea0 f95056c0 f86178a1 (b9407002)
---[ end trace 7cc3941aa0d8e6a4 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x4ce722520000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x000005c1,a3330e5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
During system shutdown, the mlxbf_gige driver's shutdown() is always executed.
However, the driver's stop() method will only execute if networking interface
configuration logic within the Linux distribution has been setup to do so.
If shutdown() executes but stop() does not execute, NAPI remains enabled
and this can lead to an exception if NAPI is scheduled while the hardware
interface has only been partially deinitialized.
The networking interface managed by the mlxbf_gige driver must be properly
stopped during system shutdown so that IFF_UP is cleared, the hardware
interface is put into a clean state, and NAPI is fully deinitialized.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20240325210929.25362-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The WCN6855 firmware on the Lenovo ThinkPad X13s expects the Bluetooth
device address in big-endian order when setting it using the
EDL_WRITE_BD_ADDR_OPCODE command.
Presumably, this is the case for all non-ROME devices which all use the
EDL_WRITE_BD_ADDR_OPCODE command for this (unlike the ROME devices which
use a different command and expect the address in little-endian order).
Reverse the little-endian address before setting it to make sure that
the address can be configured using tools like btmgmt or using the
'local-bd-address' devicetree property.
Note that this can potentially break systems with boot firmware which
has started relying on the broken behaviour and is incorrectly passing
the address via devicetree in big-endian order.
The only device affected by this should be the WCN3991 used in some
Chromebooks. As ChromeOS updates the kernel and devicetree in lockstep,
the new 'qcom,local-bd-address-broken' property can be used to determine
if the firmware is buggy so that the underlying driver bug can be fixed
without breaking backwards compatibility.
Set the HCI_QUIRK_BDADDR_PROPERTY_BROKEN quirk for such platforms so
that the address is reversed when parsing the address property.
Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address")
Cc: stable@vger.kernel.org # 5.1
Cc: Balakrishna Godavarthi <quic_bgodavar@quicinc.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Nikita Travkin <nikita@trvn.ru> # sc7180
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This reverts commit 7dcd3e014aa7faeeaf4047190b22d8a19a0db696.
Qualcomm Bluetooth controllers like WCN6855 do not have persistent
storage for the Bluetooth address and must therefore start as
unconfigured to allow the user to set a valid address unless one has
been provided by the boot firmware in the devicetree.
A recent change snuck into v6.8-rc7 and incorrectly started marking the
default (non-unique) address as valid. This specifically also breaks the
Bluetooth setup for some user of the Lenovo ThinkPad X13s.
Note that this is the second time Qualcomm breaks the driver this way
and that this was fixed last year by commit 6945795bc81a ("Bluetooth:
fix use-bdaddr-property quirk"), which also has some further details.
Fixes: 7dcd3e014aa7 ("Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT")
Cc: stable@vger.kernel.org # 6.8
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Clayton Craft <clayton@craftyguy.net>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If the SPI data size is smaller than FIFO, it operates in PIO mode,
and if it is larger than FIFO size, it oerates in DMA mode.
If the SPI data size is equal to fifo, it operates in PIO mode and it is
separated to 2 transfers. To prevent it, it must operate in DMA mode
from the case where the data size and the fifo size are the same.
Fixes: 1ee806718d5e ("spi: s3c64xx: support interrupt based pio mode")
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240329085840.65856-1-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Depending on the value of CONFIG_HZ, clang complains about a pointless
comparison:
drivers/md/dm-integrity.c:4085:12: error: result of comparison of
constant 42949672950 with expression of type
'unsigned int' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if (val >= (uint64_t)UINT_MAX * 1000 / HZ) {
As the check remains useful for other configurations, shut up the
warning by adding a second type cast to uint64_t.
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Also open-code the calls.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
For drivers making use of of_pwm_single_xlate() (i.e. those that don't
pass a hwpwm index) and also don't pass flags, setting period was
wrongly skipped. This affects the pwm-pxa and ti-sn65dsi86 drivers.
Reported-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/D05IVTPYH35N.2CLDG6LSILRSN@matfyz.cz
Fixes: 40ade0c2e794 ("pwm: Let the of_xlate callbacks accept references without period")
Tested-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240329103544.545290-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
