summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-10-11mlxsw: spectrum_switchdev: Prepare for VxLAN FDB notificationsIdo Schimmel
VxLAN FDB notifications need to be handled differently than bridge FDB notifications, so initialize the work item based on the received notification and rename the invoked function accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum: Remove misuses of private header fileIdo Schimmel
The spectrum_router.h header file is private to the router block and should only be included by direct consumers of it, such as dpipe and the multicast routing code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11octeontx2-af: Remove set but not used variable 'dev'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/marvell/octeontx2/af/cgx.c: In function 'cgx_fwi_event_handler': drivers/net/ethernet/marvell/octeontx2/af/cgx.c:257:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable] It never be used since introduction in commit 1463f382f58d ("octeontx2-af: Add support for CGX link management") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: mscc: allow extracting the FCS into the skbAntoine Tenart
This patch adds support for the NETIF_F_RXFCS feature in the Mscc Ethernet driver. This feature is disabled by default and allow a user to request the driver not to drop the FCS and to extract it into the skb for debugging purposes. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add HW RSS hash information to RX skbPeng Li
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add RSS tuples support for VFJian Shen
This patch adds RSS tuple support for VF in revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add RSS general configuration support for VFJian Shen
This patch adds RSS key, hash algorithm configuration support for VF in revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: hns3: Add new RSS hash algorithm support for PFJian Shen
This patch adds ETH_RSS_HASH_XOR hash algorithm supports, which is supported by hw revision 0x21. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interfaceGiacinto Cifelli
Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10phy: phy-ocelot-serdes: fix return value check in serdes_probe()Wei Yongjun
In case of error, the function syscon_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 51f6b410fc22 ("phy: add driver for Microsemi Ocelot SerDes muxing") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: check for dma mapping failuresChristoph Hellwig
The driver was lacking any handling for failures from the DMA mapping routines. With an iommu or swiotlb this can be fatal. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: don't use GFP_DMAChristoph Hellwig
The driver properly uses the DMA mapping API, so it should not pointlessly dip into the GFP_DMA pool, which is only 16MB on x86. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: devirtualize dma alloc callsChristoph Hellwig
There is no need for an indirection before calling the dma alloc routines now that we store a struct device in struct fore200e. Also remove the pointless GFP_ATOMIC for the sbus case, and fix the up the error handling by removing the 0 dma_addr test - some iommus can return 0 as a perfectly valid bus address. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: devirtualize dma mapping callsChristoph Hellwig
There is no need for an indirection before calling the dma mapping routines now that we store a struct device in struct fore200e. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: remove the align_size field of struct chunkChristoph Hellwig
There is no need for this field, as the only user of it can just use the local size variable instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: store a struct device in struct fore200eChristoph Hellwig
This can be used much better than the untyped void pointer containing either a PCI or platform device. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10fore200e: simplify fore200e_bus usageChristoph Hellwig
There is no need to have a global array of the ops, instead PCI and sbus can have their own instances assigned in *_probe. Also switch to C99 initializers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: tun: remove useless codes of tun_automq_select_queueWang Li
Because the function __skb_get_hash_symmetric always returns non-zero. Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Wang Li <wangli39@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10virtio_net: ethtool tx napi configurationJason Wang
Implement ethtool .set_coalesce (-C) and .get_coalesce (-c) handlers. Interrupt moderation is currently not supported, so these accept and display the default settings of 0 usec and 1 frame. Toggle tx napi through setting tx-frames. So as to not interfere with possible future interrupt moderation, value 1 means tx napi while value 0 means not. Only allow the switching when device is down for simplicity. Link: https://patchwork.ozlabs.org/patch/948149/ Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10nfp: flower: use host context count provided by firmwarePieter Jansen van Vuuren
Read the host context count symbols provided by firmware and use it to determine the number of allocated stats ids. Previously it won't be possible to offload more than 2^17 filter even if FW was able to do so. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10nfp: flower: use stats array instead of storing stats per flowPieter Jansen van Vuuren
Make use of an array stats instead of storing stats per flow which would require a hash lookup at critical times. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10nfp: flower: use rhashtable for flow cachingPieter Jansen van Vuuren
Make use of relativistic hash tables for tracking flows instead of fixed sized hash tables. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10isdn/hisax: amd7930_fn: Remove unnecessary parenthesesNathan Chancellor
Clang warns when multiple sets of parentheses are used for a single conditional statement. drivers/isdn/hisax/amd7930_fn.c:628:32: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((cs->dc.amd7930.ph_state == 8)) { ~~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/isdn/hisax/amd7930_fn.c:628:32: note: remove extraneous parentheses around the comparison to silence this warning if ((cs->dc.amd7930.ph_state == 8)) { ~ ^ ~ drivers/isdn/hisax/amd7930_fn.c:628:32: note: use '=' to turn this equality comparison into an assignment if ((cs->dc.amd7930.ph_state == 8)) { ^~ = 1 warning generated. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10mlxsw: pci: Fix a typoNir Dotan
Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11Merge tag 'for-4.19/dm-fixes-4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Mike writes: "device mapper fix for 4.19 final - Fix for earlier 4.19 final DM linear change that incorrectly checked for CONFIG_DM_ZONED rather than CONFIG_BLK_DEV_ZONED." * tag 'for-4.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm linear: fix linear_end_io conditional definition
2018-10-10net: aquantia: remove some redundant variable initializationsColin Ian King
There are several variables being initialized that are being set later and hence the initialization is redundant and can be removed. Remove then. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10dm linear: fix linear_end_io conditional definitionDamien Le Moal
The dm-linear target is independent of the dm-zoned target. For code requiring support for zoned block devices, use CONFIG_BLK_DEV_ZONED instead of CONFIG_DM_ZONED. While at it, similarly to dm linear, also enable the DM_TARGET_ZONED_HM feature in dm-flakey only if CONFIG_BLK_DEV_ZONED is defined. Fixes: beb9caac211c1 ("dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled") Fixes: 0be12c1c7fce7 ("dm linear: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-10net/mlx5: WQ, fixes for fragmented WQ buffers APITariq Toukan
mlx5e netdevice used to calculate fragment edges by a call to mlx5_wq_cyc_get_frag_size(). This calculation did not give the correct indication for queues smaller than a PAGE_SIZE, (broken by default on PowerPC, where PAGE_SIZE == 64KB). Here it is replaced by the correct new calls/API. Since (TX/RX) Work Queues buffers are fragmented, here we introduce changes to the API in core driver, so that it gets a stride index and returns the index of last stride on same fragment, and an additional wrapping function that returns the number of physically contiguous strides that can be written contiguously to the work queue. This obsoletes the following API functions, and their buggy usage in EN driver: * mlx5_wq_cyc_get_frag_size() * mlx5_wq_cyc_ctr2fragix() The new API improves modularity and hides the details of such calculation for mlx5e netdevice and mlx5_ib rdma drivers. New calculation is also more efficient, and improves performance as follows: Packet rate test: pktgen, UDP / IPv4, 64byte, single ring, 8K ring size. Before: 16,477,619 pps After: 17,085,793 pps 3.7% improvement Fixes: 3a2f70331226 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5: Take only bit 24-26 of wqe.pftype_wq for page fault typeHuy Nguyen
The HW spec defines only bits 24-26 of pftype_wq as the page fault type, use the required mask to ensure that. Fixes: d9aaed838765 ("{net,IB}/mlx5: Refactor page fault handling") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5: Fix memory leak when setting fpga ipsec capsTalat Batheesh
Allocated memory for context should be freed once finished working with it. Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code") Signed-off-by: Talat Batheesh <talatb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5e: Do not ignore netdevice TX/RX queues numberFeras Daoud
The current design of mlx5e driver ignores the netdevice TX/RX queues number for netdevices that RDMA IPoIB ULP creates. Instead, the queue number is initialized to the maximum number that mlx5 thinks best for performance. As a result, ULP drivers that choose to create a netdevice with queue number that is less than the maximum channels mlx5 creates, will get a memory corruption. This fix changes the mlx5e netdev logic to respect ULP netdevices TX/RX queue number and use it when creating resources instead of the maximum channel number. Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5e: Use non-delayed work for update statsSaeed Mahameed
Convert mlx5e update stats work to a normal work structure, since it is never used delayed. Add a helper function to queue update stats work on demand which checks for some conditions and reduce code duplication to have a better abstraction. Fixes: ed56c5193ad8 ("net/mlx5e: Update NIC HW stats on demand only") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5e: Initialize all netdev common structures in one placeSaeed Mahameed
Move all mlx5e generic structures initializations to mlx5e_netdev_init. The common structure new initializer function will be used to initialize mlx5 context for netlink created netdevs such as IPoIB mlx5 accelerated child netdevs. Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com>
2018-10-10net/mlx5e: Always initialize update stats delayed workFeras Daoud
mlx5e_detach_netdev cancels update_stats work which was not initialized in ipoib netdevice profile, as a result, the following assert occurs: ODEBUG: assert_init not available (active state 0) object type: timer_list hint:(null) This change moves the update stats work to be initialized for all mlx5e netdevices. Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10net/mlx5e: Gather common netdev init/cleanup functionality in one placeFeras Daoud
Introduce a helper init/cleanup function that initializes mlx5e generic netdev private structure, and use them from all profiles init/cleanup callbacks. This patch will also be helpful to initialize/cleanup netdevs that are not created by mlx5 driver, e.g: accelerated ipoib child netdevs. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10RDMA/netdev: Fix netlink support in IPoIBDenis Drozdov
IPoIB netlink support was broken by the below commit since integrating the rdma_netdev support relies on an allocation flow for netdevs that was controlled by the ipoib driver while netdev's rtnl_newlink implementation assumes that the netdev will be allocated by netlink. Such situation leads to crash in __ipoib_device_add, once trying to reuse netlink device. This patch fixes the kernel oops for both mlx4 and mlx5 devices triggered by the following command: Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10RDMA/netdev: Hoist alloc_netdev_mqs out of the driverDenis Drozdov
netdev has several interfaces that expect to call alloc_netdev_mqs from the core code, with the driver only providing the arguments. This is incompatible with the rdma_netdev interface that returns the netdev directly. Thus re-organize the API used by ipoib so that the verbs core code calls alloc_netdev_mqs for the driver. This is done by allowing the drivers to provide the allocation parameters via a 'get_params' callback and then initializing an allocated netdev as a second step. Fixes: cd565b4b51e5 ("IB/IPoIB: Support acceleration options callbacks") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Denis Drozdov <denisd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-10Merge tag 'for-4.19/dm-fixes-3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Mike writes: "device mapper fixes for 4.19 final - Fix a DM cache module init error path bug that doesn't properly cleanup a KMEM_CACHE if target registration fails. - Two stable@ fixes for DM zoned target; 4.20 will have changes that eliminate this code entirely but <= 4.19 needs these changes." * tag 'for-4.19/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm linear: eliminate linear_end_io call if CONFIG_DM_ZONED disabled dm: fix report zone remapping to account for partition offset dm cache: destroy migration_cache if cache target registration failed
2018-10-10Merge tag 'devicetree-fixes-for-4.19-3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Rob writes: "Devicetree fixes for 4.19, part 3: - Fix DT unittest on Oldworld MAC systems" * tag 'devicetree-fixes-for-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: unittest: Disable interrupt node tests for old world MAC systems
2018-10-10IB/mlx5: Unmap DMA addr from HCA before IOMMUValentine Fatiev
The function that puts back the MR in cache also removes the DMA address from the HCA. Therefore we need to call this function before we remove the DMA mapping from MMU. Otherwise the HCA may access a memory that is no longer DMA mapped. Call trace: NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0. CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc6+ #4 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 08/20/2012 RIP: 0010:intel_idle+0x73/0x120 Code: 80 5c 01 00 0f ae 38 0f ae f0 31 d2 65 48 8b 04 25 80 5c 01 00 48 89 d1 0f 60 02 RSP: 0018:ffffffff9a403e38 EFLAGS: 00000046 RAX: 0000000000000030 RBX: 0000000000000005 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff9a5790c0 RDI: 0000000000000000 RBP: 0000000000000030 R08: 0000000000000000 R09: 0000000000007cf9 R10: 000000000000030a R11: 0000000000000018 R12: 0000000000000000 R13: ffffffff9a5792b8 R14: ffffffff9a5790c0 R15: 0000002b48471e4d FS: 0000000000000000(0000) GS:ffff9c6caf400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5737185000 CR3: 0000000590c0a002 CR4: 00000000000606f0 Call Trace: cpuidle_enter_state+0x7e/0x2e0 do_idle+0x1ed/0x290 cpu_startup_entry+0x6f/0x80 start_kernel+0x524/0x544 ? set_init_arg+0x55/0x55 secondary_startup_64+0xa4/0xb0 DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [04:00.0] fault addr b34d2000 [fault reason 06] PTE Read access is not set DMAR: [DMA Read] Request device [01:00.2] fault addr bff8b000 [fault reason 06] PTE Read access is not set Fixes: f3f134f5260a ("RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory") Signed-off-by: Valentine Fatiev <valentinef@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-10octeontx2-af: Register for CGX lmac eventsLinu Cherian
Added support in RVU AF driver to register for CGX LMAC link status change events from firmware and managing them. Processing part will be added in followup patches. - Introduced eventqueue for posting events from cgx lmac. Queueing mechanism will ensure that events can be posted and firmware can be acked immediately and hence event reception and processing are decoupled. - Events gets added to the queue by notification callback. Notification callback is expected to be atomic, since it is called from interrupt context. - Events are dequeued and processed in a worker thread. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Add support for CGX link managementLinu Cherian
CGX LMAC initialization, link status polling etc is done by low level secure firmware. For link management this patch adds a interface or communication mechanism between firmware and this kernel CGX driver. - Firmware interface specification is defined in cgx_fw_if.h. - Support to send/receive commands/events to/form firmware. - events/commands implemented * link up * link down * reading firmware version Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Nithya Mani <nmani@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Set RVU PFs to CGX LMACs mappingLinu Cherian
Each of the enabled CGX LMAC is considered a physical interface and RVU PFs are mapped to these. VFs of these SRIOV PFs will be virtual interfaces and share CGX LMAC along with PF. This mapping info will be used later on for Rx/Tx pkt steering. Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Add Marvell OcteonTX2 CGX driverSunil Goutham
This patch adds basic template for Marvell OcteonTX2's CGX ethernet interface driver. Just the probe. RVU AF driver will use APIs exported by this driver for various things like PF to physical interface mapping, loopback mode, interface stats etc. Hence marged both drivers into a single module. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Reconfig MSIX base with IOVAGeetha sowjanya
HW interprets RVU_AF_MSIXTR_BASE address as an IOVA, hence create a IOMMU mapping for the physcial address configured by firmware and reconfig RVU_AF_MSIXTR_BASE with IOVA. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Configure block LF's MSIX vector offsetSunil Goutham
Firmware configures a certain number of MSIX vectors to each of enabled RVU PF/VF. When a block LF is attached to a PF/VF, number of MSIX vectors needed by that LF are set aside (out of PF/VF's total MSIX vectors) and LF's msix_offset is configured in HW. Also added support for a RVU PF/VF to retrieve that block LF's MSIX vector offset information from AF via mbox. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Add RVU block LF provisioning supportSunil Goutham
Added support for a RVU PF/VF to request AF via mailbox to attach or detach NPA/NIX/SSO/SSOW/TIM/CPT block LFs. Also supports partial detachment and modifying current LF attached count of a certian block type. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10octeontx2-af: Scan blocks for LFs provisioned to PF/VFSunil Goutham
Scan all RVU blocks to find any 'LF to RVU PF/VF' mapping done by low level firmware. If found any, mark them as used in respective block's LF bitmap and also save mapped PF/VF's PF_FUNC info. This is done to avoid reattaching a block LF to a different RVU PF/VF. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 13:56:57 +0000