summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-11Bluetooth: vhci: Fix race when opening vhci deviceArkadiusz Bokowy
When the vhci device is opened in the two-step way, i.e.: open device then write a vendor packet with requested controller type, the device shall respond with a vendor packet which includes HCI index of created interface. When the virtual HCI is created, the host sends a reset request to the controller. This request is processed by the vhci_send_frame() function. However, this request is send by a different thread, so it might happen that this HCI request will be received before the vendor response is queued in the read queue. This results in the HCI vendor response and HCI reset request inversion in the read queue which leads to improper behavior of btvirt: > dmesg [1754256.640122] Bluetooth: MGMT ver 1.22 [1754263.023806] Bluetooth: MGMT ver 1.22 [1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110 In order to synchronize vhci two-step open/setup process with virtual HCI initialization, this patch adds internal lock when queuing data in the vhci_send_frame() function. Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-10-11media: i2c: ov8858: Don't set fwnode in the driverOndrej Jirman
This makes the driver work with the new check in v4l2_async_register_subdev() that was introduced recently in 6.6-rc1. Without this change, probe fails with: ov8858 1-0036: Detected OV8858 sensor, revision 0xb2 ov8858 1-0036: sub-device fwnode is an endpoint! ov8858 1-0036: v4l2 async register subdev failed ov8858: probe of 1-0036 failed with error -22 This also simplifies the driver a bit. Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11media: ipu-bridge: Add missing acpi_dev_put() in ipu_bridge_get_ivsc_acpi_dev()Geert Uytterhoeven
In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer from the outer loop is handed over to the caller, which takes proper care of its reference count. However, the "consumer" acpi_device pointer from the inner loop is lost, without decrementing its reference count. Fix this by adding the missing call to acpi_dev_put(). Fixes: c66821f381ae ("media: pci: intel: Add IVSC support for IPU bridge driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11media: xilinx-vipp: Look for entities also in waiting_listSakari Ailus
The big V4L2 async framework overhaul simplified linked lists used by the V4L2 async framework. This affected a few drivers and it turns out a few of those drivers rely on searching for entities in both async notifier's waiting and done lists. Do that by separately traversing both. Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-11media: subdev: Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is ↵Hans de Goede
disabled Since the stream API is still experimental it is currently locked away behind the internal, default disabled, v4l2_subdev_enable_streams_api flag. Advertising V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled confuses userspace. E.g. it causes the following libcamera error: ERROR SimplePipeline simple.cpp:1497 Failed to reset routes for /dev/v4l-subdev1: Inappropriate ioctl for device Don't report V4L2_SUBDEV_CAP_STREAMS when the streams API is disabled to avoid problems like this. Reported-by: Dennis Bonke <admin@dennisbonke.com> Fixes: 9a6b5bf4c1bb ("media: add V4L2_SUBDEV_CAP_STREAMS") Cc: stable@vger.kernel.org # for >= 6.3 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12Merge tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly fixes, the core is msm and amdgpu with some scattered fixes across vmwgfx, panel and the core stuff. atomic-helper: - Relax checks for unregistered connectors dma-buf: - Work around race condition when retrieving fence timestamp gem: - Avoid OOB access in BO memory range panel: - boe-tv101wun-ml6: Fix flickering simpledrm: - Fix error output vwmgfx: - Fix size calculation in texture-state code - Ref GEM BOs in surfaces msm: - PHY/link training reset fix - msm8998 - correct highest bank bit - skip video mode if timing engine disabled - check irq_of_parse_and_map return code - add new lines to some prints - fail atomic check for max mdp clk test amdgpu: - Seamless boot fix - Fix TTM BO resource check - SI fix for doorbell handling" * tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm: drm/tiny: correctly print `struct resource *` on error drm: Do not overrun array in drm_gem_get_pages() drm/atomic-helper: relax unregistered connector check drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term drm/amdgpu: fix SI failure due to doorbells allocation drm/amdgpu: add missing NULL check drm/amd/display: Don't set dpms_off for seamless boot drm/vmwgfx: Keep a gem reference to user bos in surfaces drm/vmwgfx: fix typo of sizeof argument drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits dma-buf: add dma_fence_timestamp helper drm/msm/dp: Add newlines to debug printks drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow drm/msm/dsi: fix irq_of_parse_and_map() error checking drm/msm/dsi: skip the wait for video mode done if not applicable drm/msm/mdss: fix highest-bank-bit for msm8998 drm/msm/dp: do not reinitialize phy unless retry during link training
2023-10-13Merge tag 'amd-drm-fixes-6.6-2023-10-11' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.6-2023-10-11: amdgpu: - Seemless boot fix - Fix TTM BO resource check - SI fix for doorbell handling Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012025637.7783-1-alexander.deucher@amd.com
2023-10-13Merge tag 'drm-msm-fixes-2023-10-07' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.6-rc5 - fix to not reset the PHY everytime we start link training but only do it if link training fails. Without this, the PLL unlocked interrupt fires causing "Unexpected DP AUX IRQ 0x01000000 when not busy" spam in the logs since last 2-3 cycles - correct the highest bank bit to match downstream device tree for msm8998 - skip the video mode wait if the timing engine is not enabled. This was introduced after pre_enable flag for DSI video mode panels where we would end up waiting for the video mode done interrupt even before enabling timing engine causing error spam and long bootup times. - check the correct return code of irq_of_parse_and_map() in DSI code - avoid overflow issues in the dpu bandwidth calculation . This was exposed for high resolution displays and a critical fix to avoid atomic_check failure - minor fix to add new lines in DP print messages. - Fix to fail atomic_check() if the resolution exceeds max mdp clk. This leads to underflow otherwise if we try to allow that frame. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-HNxQ=VBtZ8geGzYJum9jtManEdbvhcjo_WWF_J9Ziw@mail.gmail.com
2023-10-12Merge tag 'for-v6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: - qcom_battmgr: endianness fixes * tag 'for-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: qcom_battmgr: fix enable request endianness power: supply: qcom_battmgr: fix battery_id type
2023-10-13Merge tag 'drm-misc-fixes-2023-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * atomic-helper: Relax checks for unregistered connectors * dma-buf: Work around race condition when retrieving fence timestamp * gem: Avoid OOB access in BO memory range * panel: * boe-tv101wun-ml6: Fix flickering * simpledrm: Fix error output * vwmgfx: * Fix size calculation in texture-state code * Ref GEM BOs in surfaces Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g
2023-10-11cpu-hotplug: Provide prototypes for arch CPU registrationRussell King (Oracle)
Provide common prototypes for arch_register_cpu() and arch_unregister_cpu(). These are called by acpi_processor.c, with weak versions, so the prototype for this is already set. It is generally not necessary for function prototypes to be conditional on preprocessor macros. Some architectures (e.g. Loongarch) are missing the prototype for this, and rather than add it to Loongarch's asm/cpu.h, do the job once for everyone. Since this covers everyone, remove the now unnecessary prototypes in asm/cpu.h, and therefore remove the 'static' from one of ia64's arch_register_cpu() definitions. [ tglx: Bring back the ia64 part and remove the ACPI prototypes ] Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/E1qkoRr-0088Q8-Da@rmk-PC.armlinux.org.uk
2023-10-11usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scopeMario Limonciello
On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs at a black screen on startup. This issue occurs only if `ucsi_acpi` has loaded before `amdgpu` has loaded. The reason for this failure is that `amdgpu` uses power_supply_is_system_supplied() to determine if running on AC or DC power at startup. If this value is reported incorrectly the dGPU will also be programmed incorrectly and trigger errors. power_supply_is_system_supplied() reports the wrong value because UCSI power supplies provided as part of the system don't properly report the scope as "DEVICE" scope (not powering the system). In order to fix this issue check the capabilities reported from the UCSI power supply to ensure that it supports charging a battery and that it can be powered by AC. Mark the scope accordingly. Cc: stable@vger.kernel.org Fixes: a7fbfd44c020 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope") Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html p28 Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-11usb: typec: ucsi: Fix missing link removalHeikki Krogerus
The link between the partner device and its USB Power Delivery instance was never removed which prevented the device from being released. Removing the link always when the partner is unregistered. Fixes: b04e1747fbcc ("usb: typec: ucsi: Register USB Power Delivery Capabilities") Cc: stable <stable@kernel.org> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Closes: https://lore.kernel.org/linux-usb/ZSUMXdw9nanHtnw2@kuha.fi.intel.com/ Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231010141749.3912016-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-11usb: typec: altmodes/displayport: Signal hpd low when exiting modeRD Babiera
Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort driver currently resets the status and configuration of the port partner. The hpd signal is not updated despite being part of the status, so the Display stack can still transmit video despite typec_altmode_exit placing the lanes in a Safe State. Set hpd to low when a sent EXIT_MODE message is ACK'ed. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-11nfp: flower: avoid rmmod nfp crash issuesYanguo Li
When there are CT table entries, and you rmmod nfp, the following events can happen: task1： nfp_net_pci_remove ↓ nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3) ↓ nfp_zone_table_entry_destroy(1) task2： nfp_fl_ct_handle_nft_flow(2) When the execution order is (1)->(2)->(3), it will crash. Therefore, in the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to be executed synchronously. At the same time, in order to solve the deadlock problem and the problem of rtnl_lock sometimes failing, replace rtnl_lock with the private nfp_fl_lock. Fixes: 7cc93d888df7 ("nfp: flower-ct: remove callback delete deadlock") Cc: stable@vger.kernel.org Signed-off-by: Yanguo Li <yanguo.li@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11platform/x86: msi-ec: Fix the 3rd configNikita Kravets
Fix the charge control address of CONF3 and remove an incorrect firmware version which turned out to be a BIOS firmware and not an EC firmware. Fixes: 392cacf2aa10 ("platform/x86: Add new msi-ec driver") Cc: Aakash Singh <mail@singhaakash.dev> Cc: Jose Angel Pastrana <japp0005@red.ujaen.es> Signed-off-by: Nikita Kravets <teackot@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231006175352.1753017-5-teackot@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-11wifi: brcmfmac: fweh: Add __counted_by for struct brcmf_fweh_queue_item and ↵Gustavo A. R. Silva
use struct_size() Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). Also, relocate `event->datalen = datalen;` to before calling `memcpy(event->data, data, datalen);`, so that the __counted_by annotation has effect, and flex-array member `data` can be properly bounds-checked at run-time. While there, use struct_size() helper, instead of the open-coded version, to calculate the size for the allocation of the whole flexible structure, including of course, the flexible-array member. This code was found with the help of Coccinelle, and audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ZSRzrIe0345eymk2@work
2023-10-11platform/x86: intel-uncore-freq: Conditionally create attribute for read ↵Srinivas Pandruvada
frequency When the current uncore frequency can't be read, don't create attribute "current_freq_khz" as any read will fail later. Some user space applications like turbostat fail to continue with the failure. So, check error during attribute creation. Fixes: 414eef27283a ("platform/x86/intel/uncore-freq: Display uncore current frequency") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20231004181915.1887913-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-10-11wifi: hostap: Add __counted_by for struct prism2_download_data and use ↵Gustavo A. R. Silva
struct_size() Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). While there, use struct_size() helper, instead of the open-coded version, to calculate the size for the allocation of the whole flexible structure, including of course, the flexible-array member. This code was found with the help of Coccinelle, and audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ZSRXXvWMMkm7qqRW@work
2023-10-11wifi: rtw88: Remove duplicate NULL check before calling usb_kill/free_urb()Jinjie Ruan
Both usb_kill_urb() and usb_free_urb() do the NULL check itself, so there is no need to duplicate it prior to calling. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231008025852.1239450-1-ruanjinjie@huawei.com
2023-10-11Merge tag 'platform-drivers-x86-mellanox-init-v6.6' into fixesHans de Goede
Fixes in the mellanox init branch due for v6.6. platform-drivers-x86-mellanox-init-v6.6: v6.6-rc1 + fixes in the platform-drivers-x86-mellanox-init branch to avoid a feature conflict during the v6.7 merge window.
2023-10-11net: dsa: dsa_loop: add phylink capabilitiesRussell King (Oracle)
Add phylink capabilities for dsa_loop, which I believe being a software construct means that it supports essentially all interface types and all speeds. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11net: dsa: vsc73xx: add phylink capabilitiesRussell King (Oracle)
Add phylink capabilities for vsc73xx. Although this switch driver does populates the .adjust_link method, dsa_slave_phy_setup() will still be used to create phylink instances for the LAN ports, although phylink won't be used for shared links. There are two different classes of switch - 5+1 and 8 port. The 5+1 port switches uses port indicies 0-4 for the user interfaces and 6 for the CPU port. The 8 port is confusing - some comments in the driver imply that port index 7 is used, but the driver actually still uses 6, so that is what we go with. Also, there appear to be no DTs in the kernel tree that are using the 8 port variety. It also looks like port 5 is always skipped. The switch supports 10M, 100M and 1G speeds. It is not clear whether all these speeds are supported on the CPU interface. It also looks like symmetric pause is supported, whether asymmetric pause is as well is unclear. However, it looks like the pause configuration is entirely static, and doesn't depend on negotiation results. So, let's do the best effort we can based on the information found in the driver when creating vsc73xx_phylink_get_caps(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11hv_netvsc: fix netvsc_send_completion to avoid multiple message length checksSonia Sharma
The switch statement in netvsc_send_completion() is incorrectly validating the length of incoming network packets by falling through to the next case. Avoid the fallthrough. Instead break after a case match and then process the complete() call. The current code has not caused any known failures. But nonetheless, the code should be corrected as a different ordering of the switch cases might cause a length check to fail when it should not. Signed-off-by: Sonia Sharma <sonia.sharma@linux.microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: a tiny comment updateHeng Qi
Update a comment because virtio-net now supports both VIRTIO_NET_F_NOTF_COAL and VIRTIO_NET_F_VQ_NOTF_COAL. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: fix the vq coalescing setting for vq resizeHeng Qi
According to the definition of virtqueue coalescing spec[1]: Upon disabling and re-enabling a transmit virtqueue, the device MUST set the coalescing parameters of the virtqueue to those configured through the VIRTIO_NET_CTRL_NOTF_COAL_TX_SET command, or, if the driver did not set any TX coalescing parameters, to 0. Upon disabling and re-enabling a receive virtqueue, the device MUST set the coalescing parameters of the virtqueue to those configured through the VIRTIO_NET_CTRL_NOTF_COAL_RX_SET command, or, if the driver did not set any RX coalescing parameters, to 0. We need to add this setting for vq resize (ethtool -G) where vq_reset happens. [1] https://lists.oasis-open.org/archives/virtio-dev/202303/msg00415.html Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: fix per queue coalescing parameter settingHeng Qi
When the user sets a non-zero coalescing parameter to 0 for a specific virtqueue, it does not work as expected, so let's fix this. Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command") Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com> Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: consistently save parameters for per-queueHeng Qi
When using .set_coalesce interface to set all queue coalescing parameters, we need to update both per-queue and global save values. Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: fix mismatch of getting tx-framesHeng Qi
Since virtio-net allows switching napi_tx for per txq, we have to get the specific txq's result now. Fixes: 394bd87764b6 ("virtio_net: support per queue interrupt coalesce command") Cc: Gavin Li <gavinl@nvidia.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-11virtio-net: initially change the value of tx-framesHeng Qi
Background: 1. Commit 0c465be183c7 ("virtio_net: ethtool tx napi configuration") uses tx-frames to toggle napi_tx (0 off and 1 on) if notification coalescing is not supported. 2. Commit 31c03aef9bc2 ("virtio_net: enable napi_tx by default") enables napi_tx for all txqs by default. Status: When virtio-net supports notification coalescing, after initialization, tx-frames is 0 and napi_tx is true. Problem: When the user only wants to set rx coalescing params using ethtool -C eth0 rx-usecs 10, or ethtool -Q eth0 queue_mask 0x1 -C rx-usecs 10, these cmds will carry tx-frames as 0, causing the napi_tx switching condition is satisfied. Then the user gets: netlink error: Device or resource busy. The same happens when trying to set rx-frames, adaptive_rx, adaptive_tx... How to fix: When notification coalescing feature is negotiated, initially make the value of tx-frames to be consistent with napi_tx. For compatibility with the past, it is still supported to use tx-frames to toggle napi_tx. Reported-by: Xiaoming Zhao <zxm377917@alibaba-inc.com> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-10net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_readJavier Carrasco
syzbot has found an uninit-value bug triggered by the dm9601 driver [1]. This error happens because the variable res is not updated if the call to dm_read_shared_word returns an error. In this particular case -EPROTO was returned and res stayed uninitialized. This can be avoided by checking the return value of dm_read_shared_word and propagating the error if the read operation failed. [1] https://syzkaller.appspot.com/bug?extid=1f53a30781af65d2c955 Cc: stable@vger.kernel.org Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-and-tested-by: syzbot+1f53a30781af65d2c955@syzkaller.appspotmail.com Acked-by: Peter Korsgaard <peter@korsgaard.com> Fixes: d0374f4f9c35cdfbee0 ("USB: Davicom DM9601 usbnet driver") Link: https://lore.kernel.org/r/20231009-topic-dm9601_uninit_mdio_read-v2-1-f2fe39739b6c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: realtek: rtl8365mb: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8365mb-c-v1-1-0537fe9fb08c@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: realtek: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-realtek-rtl8366-core-c-v1-1-74e1b5190778@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10net: dsa: qca8k: replace deprecated strncpy with ethtool_sprintfJustin Stitt
`strncpy` is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this more robust and easier to understand interface. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-qca-qca8k-common-c-v1-1-34c8040e0f32@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'linux-can-fixes-for-6.6-20231009' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-10-09 Lukas Magel's patch for the CAN ISO-TP protocol fixes the TX state detection and wait behavior. John Watts contributes a patch to only show the sun4i_can Kconfig option on ARCH_SUNXI. A patch by Miquel Raynal fixes the soft-reset workaround for Renesas SoCs in the sja1000 driver. Markus Schneider-Pargmann's patch for the tcan4x5x m_can glue driver fixes the id2 register for the tcan4553. 2 patches by Haibo Chen fix the flexcan stop mode for the imx93 SoC. * tag 'linux-can-fixes-for-6.6-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: Fix id2_register for tcan4553 can: flexcan: remove the auto stop mode for IMX93 can: sja1000: Always restart the Tx queue after an overrun arm64: dts: imx93: add the Flex-CAN stop mode by GPR can: sun4i_can: Only show Kconfig if ARCH_SUNXI is set can: isotp: isotp_sendmsg(): fix TX state detection and wait behavior ==================== Link: https://lore.kernel.org/r/20231009085256.693378-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10appletalk: remove ipddp driverArnd Bergmann
After the cops driver is removed, ipddp is now the only CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users and can be removed, making appletalk support purely based on ethertalk, using ethernet hardware. Link: https://lore.kernel.org/netdev/e490dd0c-a65d-4acf-89c6-c06cb48ec880@app.fastmail.com/ Link: https://lore.kernel.org/netdev/9cac4fbd-9557-b0b8-54fa-93f0290a6fb8@schmorgal.com/ Cc: Doug Brown <doug@schmorgal.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231009141139.1766345-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-10Merge tag 'xsa441-6.6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for the xen events driver: Closing of an event channel in the Linux kernel can result in a deadlock. This happens when the close is being performed in parallel to an unrelated Xen console action and the handling of a Xen console interrupt in an unprivileged guest. The closing of an event channel is e.g. triggered by removal of a paravirtual device on the other side. As this action will cause console messages to be issued on the other side quite often, the chance of triggering the deadlock is not negligible" * tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: replace evtchn_rwlock with RCU
2023-10-10Merge tag 'irq-urgent-2023-10-10-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of updates for interrupt chip drivers: - Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is caused by a control bit being moved to a different location - Update the SM8150 device tree PDC resource so the version register can be read - Make the Renesas RZG2L driver correct for interrupts which are outside of the LSB in the TSSR register by using the proper macro for calculating the mask - Document the Renesas RZ2GL device tree binding correctly and update them for a few devices which faul to boot otherwise - Use the proper accessor in the RZ2GL driver instead of blindly dereferencing an unchecked pointer - Make GICv3 handle the dma-non-coherent attribute correctly - Ensure that all interrupt controller nodes on RISCV are marked as initialized correctly Maintainer changes: - Add a new entry for GIC interrupt controllers and assign Marc Zyngier as the maintainer - Remove Marc Zyngier from the core and driver maintainer entries as he is burried in work and short of time to handle that. Thanks to Marc for all the great work he has done in the past couple of years! Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for v3.2 HW") has a incorrect SOB chain. The real author is Neil. His patch was posted by Dmitry once and Neil picked it up from the list and reposted it with the bogus SOB chain. Not a big deal, but worth to mention. I wanted to fix that up, but then got distracted and Marc piled more changes on top. So I decided to leave it as is instead of rebasing world" * tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Remove myself from the general IRQ subsystem maintenance MAINTAINERS: Add myself as the ARM GIC maintainer irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data() irqchip/stm32-exti: add missing DT IRQ flag translation irqchip/riscv-intc: Mark all INTC nodes as initialized irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing irqchip/gic-v3-its: Split allocation from initialisation of its_node dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property arm64: dts: qcom: sm8150: extend the size of the PDC resource irqchip/qcom-pdc: Add support for v3.2 HW
2023-10-10Merge tag 'v6.6-p4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a regression in dm-crypt" * tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: dm crypt: Fix reqsize in crypt_iv_eboiv_gen
2023-10-10nvme-auth: use chap->s2 to indicate bidirectional authenticationMartin Wilck
Commit 546dea18c999 ("nvme-auth: check chap ctrl_key once constructed") replaced the condition "if (ctrl->ctrl_key)" (indicating bidirectional auth) by "if (chap->ctrl_key)", because ctrl->ctrl_key is a resource shared with sysfs. But chap->ctrl_key is set in nvme_auth_process_dhchap_challenge() depending on the DHVLEN in the DH-HMAC-CHAP Challenge message received from the controller, and will thus be non-NULL for every DH-HMAC-CHAP exchange, even if unidirectional auth was requested. This will lead to a protocol violation by sending a Success2 message in the unidirectional case (per NVMe base spec 2.0, the authentication transaction ends after the Success1 message for unidirectional auth). Use chap->s2 instead, which is non-zero if and only if the host requested bi-directional authentication from the controller. Fixes: 546dea18c999 ("nvme-auth: check chap ctrl_key once constructed") Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-10-10nvmet-tcp: Fix a possible UAF in queue intialization setupSagi Grimberg
From Alon: "Due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel, a malicious user can cause a UAF and a double free, which may lead to RCE (may also lead to an LPE in case the attacker already has local privileges)." Hence, when a queue initialization fails after the ahash requests are allocated, it is guaranteed that the queue removal async work will be called, hence leave the deallocation to the queue removal. Also, be extra careful not to continue processing the socket, so set queue rcv_state to NVMET_TCP_RECV_ERR upon a socket error. Cc: stable@vger.kernel.org Reported-by: Alon Zahavi <zahavi.alon@gmail.com> Tested-by: Alon Zahavi <zahavi.alon@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-10-10net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestampWill Mortensen
Commit 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") seems to have accidentally inverted the logic added in commit 0bc73ad46a76 ("net/mlx5e: Mutually exclude RX-FCS and RX-port-timestamp"). The impact of this is a little unclear since it seems the FCS scattered with RX-FCS is (usually?) correct regardless. Fixes: 1e66220948df8 ("net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change") Tested-by: Charlotte Tan <charlotte@extrahop.com> Reviewed-by: Charlotte Tan <charlotte@extrahop.com> Cc: Adham Faris <afaris@nvidia.com> Cc: Aya Levin <ayal@nvidia.com> Cc: Tariq Toukan <tariqt@nvidia.com> Cc: Moshe Shemesh <moshe@nvidia.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Will Mortensen <will@extrahop.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20231006053706.514618-1-will@extrahop.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10drm/atomic-helper: relax unregistered connector checkSimon Ser
The driver might pull connectors which weren't submitted by user-space into the atomic state. For instance, intel_dp_mst_atomic_master_trans_check() pulls in connectors sharing the same DP-MST stream. However, if the connector is unregistered, this later fails with: [ 559.425658] i915 0000:00:02.0: [drm:drm_atomic_helper_check_modeset] [CONNECTOR:378:DP-7] is not registered Skip the unregistered connector check to allow user-space to turn off connectors one-by-one. See this wlroots issue: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3407 Previous discussion: https://lore.kernel.org/intel-gfx/Y6GX7z17WmDSKwta@ideak-desk.fi.intel.com/ Signed-off-by: Simon Ser <contact@emersion.fr> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231005131623.114379-1-contact@emersion.fr
2023-10-10atm: fore200e: Drop unnecessary of_match_device()Rob Herring
It is not necessary to call of_match_device() in probe. If we made it to probe, then we've already successfully matched. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231006214421.339445-1-robh@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10mlxsw: spectrum_ethtool: Fix -Wformat-truncation warningIdo Schimmel
Ethtool stats strings cannot be longer than 32 characters ('ETH_GSTRING_LEN'), including the terminating null byte. The format string '%.29s_%.1d' can exceed this limitation if the per-TC counter name exceeds 28 characters. Together with the underscore, the two digits of the TC (bounded at 16) and the terminating null byte, more than 32 characters will be used. Fix this by bounding the counter name at 28 characters which suppresses the following build warning [1]. This does not affect ethtool output since the longest counter name does not exceed this limitation. [1] drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c: In function ‘mlxsw_sp_port_get_strings’: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:58: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^ In function ‘mlxsw_sp_port_get_tc_strings’, inlined from ‘mlxsw_sp_port_get_strings’ at drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:677:4: drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c:622:17: note: ‘snprintf’ output between 3 and 33 bytes into a destination of size 32 622 | snprintf(*p, ETH_GSTRING_LEN, "%.29s_%.1d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 623 | mlxsw_sp_port_hw_tc_stats[i].str, tc); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10mlxsw: core_thermal: Fix -Wformat-truncation warningIdo Schimmel
The name of a thermal zone device cannot be longer than 19 characters ('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-gearbox%d' can exceed this limitation if the maximum number of line cards and the maximum number of gearboxes on each line card cannot be represented using a single digit. This is not the case with current systems nor future ones. Therefore, increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and suppress the following build warning [1]. If this limitation is ever exceeded, we will know about it since the thermal core validates the thermal device's name during registration. [1] drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_gearboxes_init.constprop’: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:71: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 1 and 3 [-Werror=format-truncation=] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~ In function ‘mlxsw_thermal_gearbox_tz_init’, inlined from ‘mlxsw_thermal_gearboxes_init.constprop’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:611:9: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:52: note: directive argument in the range [1, 255] 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:543:17: note: ‘snprintf’ output between 19 and 23 bytes into a destination of size 20 543 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-gearbox%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 544 | gearbox_tz->slot_index, gearbox_tz->module + 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net/smc: Fix dependency of SMC on ISMGerd Bayer
When the SMC protocol is built into the kernel proper while ISM is configured to be built as module, linking the kernel fails due to unresolved dependencies out of net/smc/smc_ism.o to ism_get_smcd_ops, ism_register_client, and ism_unregister_client as reported via the linux-next test automation (see link). This however is a bug introduced a while ago. Correct the dependency list in ISM's and SMC's Kconfig to reflect the dependencies that are actually inverted. With this you cannot build a kernel with CONFIG_SMC=y and CONFIG_ISM=m. Either ISM needs to be 'y', too - or a 'n'. That way, SMC can still be configured on non-s390 architectures that do not have (nor need) an ISM driver. Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reported-by: Randy Dunlap <rdunlap@infradead.org> Closes: https://lore.kernel.org/linux-next/d53b5b50-d894-4df8-8969-fd39e63440ae@infradead.org/ Co-developed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20231006125847.1517840-1-gbayer@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10ixgbe: fix crash with empty VF macvlan listDan Carpenter
The adapter->vf_mvs.l list needs to be initialized even if the list is empty. Otherwise it will lead to crashes. Fixes: a1cbb15c1397 ("ixgbe: Add macvlan support for VF") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/ZSADNdIw8zFx1xw2@kadam Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10net: dsa: microchip: Fix uninitialized var in ksz9477_acl_move_entries()Oleksij Rempel
Address an issue in ksz9477_acl_move_entries() where, in the scenario (src_idx == dst_idx), ksz9477_validate_and_get_src_count() returns 0, leading to usage of uninitialized src_count and dst_count variables, which causes undesired behavior as it attempts to move ACL entries around. Fixes: 002841be134e ("net: dsa: microchip: Add partial ACL support for ksz9477 switches") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231006115822.144152-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-10-10drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP termRuihai Zhou
The sta_himax83102 panel sometimes shows abnormally flickering horizontal lines. The front gate output will precharge the X point of the next pole circuit before TP(TouchPanel Enable) term starts, and wait until the end of the TP term to resume the CLK. For this reason, the X point must be maintained during the TP term. In abnormal case, we measured a slight leakage at point X. This because during the TP term, the GPW does not fully pull the VGL low, causing the TFT to not be closed tightly. To fix this, we completely pull GPW to VGL before entering the TP term. This will ensure that the TFT is closed tightly and prevent the abnormal display. Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel") Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231007064949.22668-1-zhouruihai@huaqin.corp-partner.google.com
generated by cgit (git 2.34.1) at 2025-09-13 08:27:02 +0000