summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-06-02drm/amdgpu: refine amdgpu_fru_get_product_infoJiansong Chen
1. eliminate potential array index out of bounds. 2. return meaningful value for failure. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-02drm/amdgpu: add judgement for dc supportAsher Song
Drop DC initialization when DCN is harvested in VBIOS. The way doesn't affect virtual display ip initialization. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Asher Song <Asher.Song@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-02drm/amd/display: Fix GPU scaling regression by FS video supportNicholas Kazlauskas
[Why] FS video support regressed GPU scaling and the scaled buffer ends up stuck in the top left of the screen at native size - full, aspect, center scaling modes do not function. This is because decide_crtc_timing_for_drm_display_mode() does not get called when scaling is enabled. [How] Split recalculate timing and scaling into two different flags. We don't want to call drm_mode_set_crtcinfo() for scaling, but we do want to call it for FS video. Optimize and move preferred_refresh calculation next to decide_crtc_timing_for_drm_display_mode() like it used to be since that's not used for FS video. We don't need to copy over the VIC or polarity in the case of FS video modes because those don't change. Fixes: 6f59f229f8ed7a ("drm/amd/display: Skip modeset for front porch change") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-02drm/amd/display: Allow bandwidth validation for 0 streams.Bindu Ramamurthy
[Why] Bandwidth calculations are triggered for non zero streams, and in case of 0 streams, these calculations were skipped with pstate status not being updated. [How] As the pstate status is applicable for non zero streams, check added for allowing 0 streams inline with dcn internal bandwidth validations. Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-02net: stmmac: fix issue where clk is being unprepared twiceWong Vee Khee
In the case of MDIO bus registration failure due to no external PHY devices is connected to the MAC, clk_disable_unprepare() is called in stmmac_bus_clk_config() and intel_eth_pci_probe() respectively. The second call in intel_eth_pci_probe() will caused the following:- [ 16.578605] intel-eth-pci 0000:00:1e.5: No PHY found [ 16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed [ 16.680181] ------------[ cut here ]------------ [ 16.684861] stmmac-0000:00:1e.5 already disabled [ 16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0 [ 16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore [ 16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G U 5.13.0-rc3-intel-lts #76 [ 16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020 [ 16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0 [ 16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01 [ 16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086 [ 16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000 [ 16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff [ 16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0 [ 16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00 [ 16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0 [ 16.834047] FS: 00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000 [ 16.842177] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0 [ 16.855144] Call Trace: [ 16.857614] clk_core_disable_lock+0x1b/0x30 [ 16.861941] intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel] [ 16.867913] pci_device_probe+0xcf/0x150 [ 16.871890] really_probe+0xf5/0x3e0 [ 16.875526] driver_probe_device+0x64/0x150 [ 16.879763] device_driver_attach+0x53/0x60 [ 16.883998] __driver_attach+0x9f/0x150 [ 16.887883] ? device_driver_attach+0x60/0x60 [ 16.892288] ? device_driver_attach+0x60/0x60 [ 16.896698] bus_for_each_dev+0x77/0xc0 [ 16.900583] bus_add_driver+0x184/0x1f0 [ 16.904469] driver_register+0x6c/0xc0 [ 16.908268] ? 0xffffffffc07ae000 [ 16.911598] do_one_initcall+0x4a/0x210 [ 16.915489] ? kmem_cache_alloc_trace+0x305/0x4e0 [ 16.920247] do_init_module+0x5c/0x230 [ 16.924057] load_module+0x2894/0x2b70 [ 16.927857] ? __do_sys_finit_module+0xb5/0x120 [ 16.932441] __do_sys_finit_module+0xb5/0x120 [ 16.936845] do_syscall_64+0x42/0x80 [ 16.940476] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.945586] RIP: 0033:0x7f98830e5ccd [ 16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48 [ 16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd [ 16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012 [ 16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3 [ 17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328 [ 17.011369] ---[ end trace df06a3dab26b988c ]--- [ 17.016062] ------------[ cut here ]------------ [ 17.020701] stmmac-0000:00:1e.5 already unprepared Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let dwmac-intel to handle the unprepare and disable of the clk device. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02Merge tag 'efi-urgent-2021-06-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "A handful of EFI fixes: - Fix/robustify a diagnostic printk - Fix a (normally not triggered) parser bug in the libstub code - Allow !EFI_MEMORY_XP && !EFI_MEMORY_RO entries in the memory map - Stop RISC-V from crashing on boot if there's no FDT table" * tag 'efi-urgent-2021-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: cper: fix snprintf() use in cper_dimm_err_location() efi/libstub: prevent read overflow in find_file_option() efi: Allow EFI_MEMORY_XP and EFI_MEMORY_RO both to be cleared efi/fdt: fix panic when no valid fdt found
2021-06-02Merge tag 'acpi-5.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a mutex object memory leak in ACPICA occurring during object deletion that was introduced in 5.12-rc1 (Erik Kaneda)" * tag 'acpi-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clean up context mutex during object deletion
2021-06-02Merge tag 'hwmon-for-v5.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "The most notable fix is for the q54sj108a2 driver to let it actually instantiate. Also attribute fixes for pmbus/isl68137, pmbus/fsp-3y, and dell-smm-hwmon drivers" * tag 'hwmon-for-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon/pmbus: (q54sj108a2) The PMBUS_MFR_ID is actually 6 chars instead of 5 hwmon: (pmbus/isl68137) remove READ_TEMPERATURE_3 for RAA228228 hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E VOUT hwmon: (dell-smm-hwmon) Fix index values
2021-06-02RDMA/ipoib: Fix warning caused by destroying non-initial netnsKamal Heib
After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns. Fixes: 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces") Link: https://lore.kernel.org/r/20210525150134.139342-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-02usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handlingThomas Petazzoni
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64"), the logic to support the MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally schedule the musb->irq_work delayed work. This commit badly breaks ECM Gadget on AM335X. Indeed, with this commit, one can observe massive packet loss: $ ping 192.168.0.100 ... 15 packets transmitted, 3 received, 80% packet loss, time 14316ms Reverting this commit brings back a properly functioning ECM Gadget. An analysis of the commit seems to indicate that a mistake was made: the previous code was not falling through into the MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is taken. Changing the logic to be as it was before the problematic commit *and* only conditionally scheduling musb->irq_work resolves the regression: $ ping 192.168.0.100 ... 64 packets transmitted, 64 received, 0% packet loss, time 64475ms Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64") Cc: stable@vger.kernel.org Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULLJack Pham
There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") Cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02usb: dwc3: gadget: Disable gadget IRQ during pullup disableWesley Cheng
Current sequence utilizes dwc3_gadget_disable_irq() alongside synchronize_irq() to ensure that no further DWC3 events are generated. However, the dwc3_gadget_disable_irq() API only disables device specific events. Endpoint events can still be generated. Briefly disable the interrupt line, so that the cleanup code can run to prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and dwc3_stop_active_transfers() respectively) Without doing so, it can lead to both the interrupt handler and the pullup disable routine both writing to the GEVNTCOUNT register, which will cause an incorrect count being read from future interrupts. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-02Revert "i915: use io_mapping_map_user"Matthew Auld
This reverts commit b739f125e4ebd73d10ed30a856574e13649119ed. We are unfortunately seeing more issues like we did in 293837b9ac8d ("Revert "i915: fix remap_io_sg to verify the pgprot""), except this is now for the vm_fault_gtt path, where we are now hitting the same BUG_ON(!pte_none(*pte)): [10887.466150] kernel BUG at mm/memory.c:2183! [10887.466162] invalid opcode: 0000 [#1] PREEMPT SMP PTI [10887.466168] CPU: 0 PID: 7775 Comm: ffmpeg Tainted: G U 5.13.0-rc3-CI-Nightly #1 [10887.466174] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017 [10887.466177] RIP: 0010:remap_pfn_range_notrack+0x30f/0x440 [10887.466188] Code: e8 96 d7 e0 ff 84 c0 0f 84 27 01 00 00 48 ba 00 f0 ff ff ff ff 0f 00 4c 89 e0 48 c1 e0 0c 4d 85 ed 75 96 48 21 d0 31 f6 eb a9 <0f> 0b 48 39 37 0f 85 0e 01 00 00 48 8b 0c 24 48 39 4f 08 0f 85 00 [10887.466193] RSP: 0018:ffffc90006e33c50 EFLAGS: 00010286 [10887.466198] RAX: 800000000000002f RBX: 00007f5e01800000 RCX: 0000000000000028 [10887.466201] RDX: 0000000000000001 RSI: ffffea0000000000 RDI: 0000000000000000 [10887.466204] RBP: ffffea000033fea8 R08: 800000000000002f R09: ffff8881072256e0 [10887.466207] R10: ffffc9000b84fff8 R11: 0000000017dab000 R12: 0000000000089f9f [10887.466210] R13: 800000000000002f R14: 00007f5e017e4000 R15: ffff88800cffaf20 [10887.466213] FS: 00007f5e04849640(0000) GS:ffff888278000000(0000) knlGS:0000000000000000 [10887.466216] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10887.466220] CR2: 00007fd9b191a2ac CR3: 00000001829ac000 CR4: 00000000003506f0 [10887.466223] Call Trace: [10887.466233] vm_fault_gtt+0x1ca/0x5d0 [i915] [10887.466381] ? ktime_get+0x38/0x90 [10887.466389] __do_fault+0x37/0x90 [10887.466395] __handle_mm_fault+0xc46/0x1200 [10887.466402] handle_mm_fault+0xce/0x2a0 [10887.466407] do_user_addr_fault+0x1c5/0x660 Reverting this commit is reported to fix the issue. Reported-by: Eero Tamminen <eero.t.tamminen@intel.com> References: https://gitlab.freedesktop.org/drm/intel/-/issues/3519 Fixes: b739f125e4eb ("i915: use io_mapping_map_user") Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210527185145.458021-1-matthew.auld@intel.com (cherry picked from commit 0e4fe0c9f2f981f26e01b73f3c465ca314c4f9c0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-06-02drm/i915/selftests: Fix return value check in live_breadcrumbs_smoketest()Zhihao Cheng
In case of error, the function live_context() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/33c46ef24cd547d0ad21dc106441491a@intel.com [tursulin: Wrap commit text, fix Fixes: tag.] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 8f4caef8d5401b42c6367d46c23da5e0e8111516) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-06-02spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error codezpershuai
In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by: zpershuai <zpershuai@gmail.com> Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-02regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837Matti Vaittinen
Changing the BD71837 voltages for other regulators except the first 4 BUCKs should be forbidden when the regulator is enabled. There may be out-of-spec voltage spikes if the voltage of these "non DVS" bucks is changed when enabled. This restriction was accidentally removed when the LDO voltage change was allowed for BD71847. (It was not noticed that the BD71837 BUCK7 used same voltage setting function as LDOs). Additionally this bug causes incorrect voltage monitoring register access. The voltage change function accidentally used for bd71837 BUCK7 is intended to only handle LDO voltage changes. A BD71847 LDO specific voltage monitoring disabling code gets executed on BD71837 and register offsets are wrongly calculated as regulator is assumed to be an LDO. Prevent the BD71837 BUCK7 voltage change when BUCK7 is enabled by using the correct voltage setting operation. Fixes: 9bcbabafa19b ("regulator: bd718x7: remove voltage change restriction from BD71847 LDOs") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/bd8c00931421fafa57e3fdf46557a83075b7cc17.1622610103.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-02nvmet: fix freeing unallocated p2pmemMax Gurtovoy
In case p2p device was found but the p2p pool is empty, the nvme target is still trying to free the sgl from the p2p pool instead of the regular sgl pool and causing a crash (BUG() is called). Instead, assign the p2p_dev for the request only if it was allocated from p2p pool. This is the crash that was caused: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] invalid opcode: 0000 [#1] SMP PTI ... [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! ... [Sun May 30 19:13:53 2021] RIP: 0010:gen_pool_free_owner+0xa8/0xb0 ... [Sun May 30 19:13:53 2021] Call Trace: [Sun May 30 19:13:53 2021] ------------[ cut here ]------------ [Sun May 30 19:13:53 2021] pci_free_p2pmem+0x2b/0x70 [Sun May 30 19:13:53 2021] pci_p2pmem_free_sgl+0x4f/0x80 [Sun May 30 19:13:53 2021] nvmet_req_free_sgls+0x1e/0x80 [nvmet] [Sun May 30 19:13:53 2021] kernel BUG at lib/genalloc.c:518! [Sun May 30 19:13:53 2021] nvmet_rdma_release_rsp+0x4e/0x1f0 [nvmet_rdma] [Sun May 30 19:13:53 2021] nvmet_rdma_send_done+0x1c/0x60 [nvmet_rdma] Fixes: c6e3f1339812 ("nvmet: add metadata support for block devices") Reviewed-by: Israel Rukshin <israelr@nvidia.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-02nvme-loop: do not warn for deleted controllers during resetHannes Reinecke
During concurrent reset and delete calls the reset workqueue is flushed, causing nvme_loop_reset_ctrl_work() to be executed when the controller is in state DELETING or DELETING_NOIO. But this is expected, so we shouldn't issue a WARN_ON here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-02nvme-loop: check for NVME_LOOP_Q_LIVE in nvme_loop_destroy_admin_queue()Hannes Reinecke
We need to check the NVME_LOOP_Q_LIVE flag in nvme_loop_destroy_admin_queue() to protect against duplicate invocations eg during concurrent reset and remove calls. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-02nvme-loop: clear NVME_LOOP_Q_LIVE when nvme_loop_configure_admin_queue() failsHannes Reinecke
When the call to nvme_enable_ctrl() in nvme_loop_configure_admin_queue() fails the NVME_LOOP_Q_LIVE flag is not cleared. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-02nvme-loop: reset queue count to 1 in nvme_loop_destroy_io_queues()Hannes Reinecke
The queue count is increased in nvme_loop_init_io_queues(), so we need to reset it to 1 at the end of nvme_loop_destroy_io_queues(). Otherwise the function is not re-entrant safe, and crash will happen during concurrent reset and remove calls. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-01Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheralDavid Collins
On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral is split into two peripherals: PON_HLOS and PON_PBS. The application processor only has write access to PON_HLOS which limits it to only receiving PON interrupts. Add support for the PMK8350 PON_HLOS peripheral so that its KPDPWR_N and RESIN_N interrupts can be used to detect key presses. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1620630064-16354-2-git-send-email-skakit@codeaurora.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: edt-ft5x06 - add support for iovcc-supplyStephan Gerhold
At the moment, the edt-ft5x06 driver can control a single regulator ("vcc"). However, some FocalTech touch controllers have an additional IOVCC pin that should be supplied with the digital I/O voltage. The I/O voltage might be provided by another regulator that should also be kept on. Otherwise, the touchscreen can randomly stop functioning if the regulator is turned off because no other components still require it. Implement (optional) support for also enabling an "iovcc-supply". The datasheet specifies a delay of ~ 10us before enabling VDD/VCC after IOVCC is enabled, so make sure to enable IOVCC first. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Input: cyttsp - remove public headerDmitry Torokhov
There is nothing in include/linux/input/cyttsp.h that might be of interes to the kernel at large, so let's move this information into the driver code and remove the header. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - memory leak fix in usbhid from Anirudh Rayabharam - additions for a few new recognized generic key IDs from Dmitry Torokhov - Asus T101HA and Dell K15A quirks from Hans de Goede - memory leak fix in amd_sfh from Basavaraj Natikar - Win8 compatibility and Stylus fixes in multitouch driver from Ahelenia Ziemiańska - NULL pointer dereference fix in hid-magicmouse from Johan Hovold - assorted other small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (33 commits) HID: asus: Cleanup Asus T101HA keyboard-dock handling HID: magicmouse: fix NULL-deref on disconnect HID: intel-ish-hid: ipc: Add Alder Lake device IDs HID: i2c-hid: fix format string mismatch HID: amd_sfh: Fix memory leak in amd_sfh_work HID: amd_sfh: Use devm_kzalloc() instead of kzalloc() HID: ft260: improve error handling of ft260_hid_feature_report_get() HID: magicmouse: fix crash when disconnecting Magic Trackpad 2 HID: gt683r: add missing MODULE_DEVICE_TABLE HID: pidff: fix error return code in hid_pidff_init() HID: logitech-hidpp: initialize level variable HID: multitouch: Disable event reporting on suspend on the Asus T101HA touchpad HID: core: Remove extraneous empty line before EXPORT_SYMBOL_GPL(hid_check_keys_pressed) HID: hid-sensor-custom: Process failure of sensor_hub_set_feature() HID: i2c-hid: Skip ELAN power-on command after reset HID: usbhid: fix info leak in hid_submit_ctrl HID: Add BUS_VIRTUAL to hid_connect logging HID: multitouch: set Stylus suffix for Stylus-application devices, too HID: multitouch: require Finger field to mark Win8 reports as MT HID: remove the unnecessary redefinition of a macro ...
2021-06-01scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-VEwan D. Milne
Apparently some arrays are now returning "HPE" as the vendor. Link: https://lore.kernel.org/r/20210601175214.25719-1-emilne@redhat.com Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-01Bluetooth: Add a new USB ID for RTL8822CELarry Finger
Some models of the RTL8822ce utilize a different USB ID. Add this new one to the Bluetooth driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-01scsi: ufs: ufs-mediatek: Fix HCI version in some platformsStanley Chu
Some MediaTek SoC platforms with UFSHCI version below 3.0 have incorrect UFSHCI versions showed in register map. Fix the version by referring to UniPro version which is always correct. Link: https://lore.kernel.org/r/20210531062642.12642-1-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-01scsi: qedf: Do not put host in qedf_vport_create() unconditionallyDaniel Wagner
Do not drop reference count on vn_port->host in qedf_vport_create() unconditionally. Instead drop the reference count in qedf_vport_destroy(). Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de Reported-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-01net/mlx5: DR, Create multi-destination flow table with level less than 64Yevgeny Kliteynik
Flow table that contains flow pointing to multiple flow tables or multiple TIRs must have a level lower than 64. In our case it applies to muli- destination flow table. Fix the level of the created table to comply with HW Spec definitions, and still make sure that its level lower than SW-owned tables, so that it would be possible to point from the multi-destination FW table to SW tables. Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Fix conflict with HW TS and CQE compressionAya Levin
When a driver's profile doesn't support a dedicated PTP-RQ, configuration of CQE compression while HW TS is configured should fail. Fixes: 885b8cfb161e ("net/mlx5e: Update ethtool setting of CQE compression") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Fix HW TS with CQE compression according to profileAya Levin
When the driver's profile doesn't support a dedicated PTP-RQ, the PTP accuracy of HW TS is affected by the CQE compression. In this case, turn off CQE compression. Otherwise, the driver crashes: BUG: kernel NULL pointer dereference, address:0000000000000018 ... ... RIP: 0010:mlx5e_ptp_rx_set_fs+0x25/0x1a0 [mlx5_core] ... ... Call Trace: mlx5e_ptp_activate_channel+0xb2/0xf0 [mlx5_core] mlx5e_activate_priv_channels+0x3b9/0x8c0 [mlx5_core] ? __mutex_unlock_slowpath+0x45/0x2a0 ? mlx5e_refresh_tirs+0x151/0x1e0 [mlx5_core] mlx5e_switch_priv_channels+0x1cd/0x2d0 [mlx5_core] ? mlx5e_xdp_allowed+0x150/0x150 [mlx5_core] mlx5e_safe_switch_params+0x118/0x3c0 [mlx5_core] ? __mutex_lock+0x6e/0x8e0 ? mlx5e_hwstamp_set+0xa9/0x300 [mlx5_core] mlx5e_hwstamp_set+0x194/0x300 [mlx5_core] ? dev_ioctl+0x9b/0x3d0 mlx5i_ioctl+0x37/0x60 [mlx5_core] mlx5i_pkey_ioctl+0x12/0x20 [mlx5_core] dev_ioctl+0xa9/0x3d0 sock_ioctl+0x268/0x420 __x64_sys_ioctl+0x3d8/0x790 ? lockdep_hardirqs_on_prepare+0xe4/0x190 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 960fbfe222a4 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Fix adding encap rules to slow pathRoi Dayan
On some devices the ignore flow level cap is not supported and we shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft() already gives the correct end ft if ignore flow level cap is supported or not. Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Check for needed capability for cvlan matchingRoi Dayan
If not supported show an error and return instead of trying to offload to the hardware and fail. Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5: Check firmware sync reset requested is set before trying to abort itMoshe Shemesh
In case driver sent NACK to firmware on sync reset request, it will get sync reset abort event while it didn't set sync reset requested mode. Thus, on abort sync reset event handler, driver should check reset requested is set before trying to stop sync reset poll. Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Disable TLS offload for uplink representorRoi Dayan
TLS offload is not supported in switchdev mode. Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01net/mlx5e: Fix incompatible castingAya Levin
Device supports setting of a single fec mode at a time, enforce this by bitmap_weight == 1. Input from fec command is in u32, avoid cast to unsigned long and use bitmap_from_arr32 to populate bitmap safely. Fixes: 4bd9d5070b92 ("net/mlx5e: Enforce setting of a single FEC mode") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-06-01ethernet: myri10ge: Fix missing error code in myri10ge_probe()Jiapeng Chong
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'status'. Eliminate the follow smatch warning: drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe() warn: missing error code 'status'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01virtio_net: get build_skb() buf by data ptrXuan Zhuo
In the case of merge, the page passed into page_to_skb() may be a head page, not the page where the current data is located. So when trying to get the buf where the data is located, we should get buf based on headroom instead of offset. This patch solves this problem. But if you don't use this patch, the original code can also run, because if the page is not the page of the current data, the calculated tailroom will be less than 0, and will not enter the logic of build_skb() . The significance of this patch is to modify this logical problem, allowing more situations to use build_skb(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01virtio-net: fix for unable to handle page fault for addressXuan Zhuo
In merge mode, when xdp is enabled, if the headroom of buf is smaller than virtnet_get_headroom(), xdp_linearize_page() will be called but the variable of "headroom" is still 0, which leads to wrong logic after entering page_to_skb(). [ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode [ 16.603350] #PF: error_code(0x0000) - not-present page [ 16.604200] PGD 0 P4D 0 [ 16.604686] Oops: 0000 [#1] SMP PTI [ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312 [ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04 [ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.624047] Call Trace: [ 16.624525] ? release_pages+0x24d/0x730 [ 16.625209] unmap_single_vma+0xa9/0x130 [ 16.625885] unmap_vmas+0x76/0xf0 [ 16.626480] exit_mmap+0xa0/0x210 [ 16.627129] mmput+0x67/0x180 [ 16.627673] do_exit+0x3d1/0xf10 [ 16.628259] ? do_user_addr_fault+0x231/0x840 [ 16.629000] do_group_exit+0x53/0xd0 [ 16.629631] __x64_sys_exit_group+0x1d/0x20 [ 16.630354] do_syscall_64+0x3c/0x80 [ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 16.631828] RIP: 0033:0x7f1a043d0191 [ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167. [ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191 [ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 [ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001 [ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490 [ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000 [ 16.640408] Modules linked in: [ 16.640958] CR2: ffffecbfff7b43c8 [ 16.641557] ---[ end trace bc4891c6ce46354c ]--- [ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0 [ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065 [ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286 [ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359 [ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005 [ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030 [ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f [ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000 [ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000 [ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0 [ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 16.658290] Kernel panic - not syncing: Fatal exception [ 16.659613] Kernel Offset: disabled [ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]--- Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01Input: resistive-adc-touch - rework mapping of channelsDmitry Torokhov
Instead of iterating over channels establish and use channel map to retrieve data. As a side effect this will silence "uninitialized variable" warnings. Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/YLXR2brkc4H54xtK@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-06-01Revert "fb_defio: Remove custom address_space_operations"Matthew Wilcox
Commit ccf953d8f3d6 makes framebuffers which use deferred I/O stop displaying updates after the first one. This is because the pages handled by fb_defio no longer have a page_mapping(). That prevents page_mkclean() from marking the PTEs as clean, and so writes are only noticed the first time. Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YLZEhv0cpZp8uVE3@casper.infradead.org
2021-06-01spi: Cleanup on failure of initial setupLukas Wunner
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the SPI core's behavior if the ->setup() hook returns an error upon adding an spi_device: Before, the ->cleanup() hook was invoked to free any allocations that were made by ->setup(). With the commit, that's no longer the case, so the ->setup() hook is expected to free the allocations itself. I've identified 5 drivers which depend on the old behavior and am fixing them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c spi-pxa2xx.c Importantly, ->setup() is not only invoked on spi_device *addition*: It may subsequently be called to *change* SPI parameters. If changing these SPI parameters fails, freeing memory allocations would be wrong. That should only be done if the spi_device is finally destroyed. I am therefore using a bool "initial_setup" in 4 of the affected drivers to differentiate between the invocation on *adding* the spi_device and any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device addition, not any subsequent calls. It therefore doesn't need the bool. It's worth noting that 5 other drivers already perform a cleanup if the ->setup() hook fails. Before c7299fea6769, they caused a double-free if ->setup() failed on spi_device addition. Since the commit, they're fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c spi-st-ssc4.c spi-tegra114.c (spi-pxa2xx.c also already performs a cleanup, but only in one of several error paths.) Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Saravana Kannan <saravanak@google.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01regulator: atc260x: Fix n_voltages and min_sel for pickable linear rangesAxel Lin
The .n_voltages was missed for pickable linear ranges, fix it. The min_sel for each pickable range should be starting from 0. Also fix atc260x_ldo_voltage_range_sel setting (bit 5 - LDO<N>_VOL_SEL in datasheet). Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/20210528230147.363974-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01regulator: rtmv20: Fix to make regcache value first reading back from HWChiYuan Huang
- Fix to make regcache value first reading back from HW. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622542155-6373-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01regulator: mt6315: Fix function prototype for mt6315_map_modeAxel Lin
The .of_map_mode should has below function prototype: unsigned int (*of_map_mode)(unsigned int mode); Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210530022109.425054-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01regulator: rtmv20: Add Richtek to Kconfig textAxel Lin
The other Richtek drivers has Richtek prefix, make it consistent. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210530124101.477727-2-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacksAxel Lin
Current code does not set .curr_table and .n_linear_ranges settings, so it cannot use the regulator_get/set_current_limit_regmap helpers. If we setup the curr_table, it will has 200 entries. Implement customized .set_current_limit/.get_current_limit callbacks instead. Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-31Input: resistive-adc-touch - replace OF headers with proper onesAndy Shevchenko
The driver is actually OF independent and doesn't need anything from OF (*). Replace OF headers with mod_devicetable.h and property.h. *) use of of_match_ptr() is actually wrong here, since it may provoke a compiler to warn about unused variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-2-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-05-31Input: resistive-adc-touch - describe parameters in kernel docAndy Shevchenko
Validation script is not happy: resistive-adc-touch.c:53: warning: Function parameter or member 'x_plate_ohms' not described in 'grts_state' resistive-adc-touch.c:53: warning: Function parameter or member 'ch' not described in 'grts_state' Describe parameters in kernel doc to make it happy. Fixes: fb082cd59afa ("Input: resistive-adc-touch - add support for z1 and z2 channels") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210528151113.85943-1-andriy.shevchenko@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-12 11:06:22 +0000