| Age | Commit message (Collapse) | Author |
|---|
|
The system'll crash when the users insmod crypto/tcrypto.ko with mode=155
( testing "authenc(hmac(sha1),cbc(aes))" ). It's caused by reuse the memory
of request structure.
In crypto_authenc_init_tfm(), the reqsize is set to:
[PART 1] sizeof(authenc_request_ctx) +
[PART 2] ictx->reqoff +
[PART 3] MAX(ahash part, skcipher part)
and the 'PART 3' is used by both ahash and skcipher in turn.
When the virtio_crypto driver finish skcipher req, it'll call ->complete
callback(in crypto_finalize_skcipher_request) and then free its
resources whose pointers are recorded in 'skcipher parts'.
However, the ->complete is 'crypto_authenc_encrypt_done' in this case,
it will use the 'ahash part' of the request and change its content,
so virtio_crypto driver will get the wrong pointer after ->complete
finish and mistakenly free some other's memory. So the system will crash
when these memory will be used again.
The resources which need to be cleaned up are not used any more. But the
pointers of these resources may be changed in the function
"crypto_finalize_skcipher_request". Thus release specific resources before
calling this function.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Acked-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-3-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
__virtio_crypto_skcipher_do_req()
The system will crash when the users insmod crypto/tcrypt.ko with mode=38
( testing "cts(cbc(aes))" ).
Usually the next entry of one sg will be @sg@ + 1, but if this sg element
is part of a chained scatterlist, it could jump to the start of a new
scatterlist array. Fix it by sg_next() on calculation of src/dst
scatterlist.
Fixes: dbaf0624ffa5 ("crypto: add virtio-crypto driver")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: virtualization@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200123101000.GB24255@Red
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20200602070501.2023-2-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
enabled
We should disable free page reporting if page poisoning is enabled but we
cannot report it via the balloon interface. This way we can avoid the
possibility of corrupting guest memory. Normally the page poisoning feature
should always be present when free page reporting is enabled on the
hypervisor, however this allows us to correctly handle a case of the
virtio-balloon device being possibly misconfigured.
Fixes: 5d757c8d518d ("virtio-balloon: add support for providing free page reports to host")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200508173732.17877.85060.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There could be ways to support doorbell mapping with !MMU, but things
like pgprot_noncached are not universally supported.
Fixable, but just disable this for now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the doorbell is relayed via eventfd which may have
significant overhead because of the cost of vmexits or syscall. This
patch introduces mmap() based doorbell mapping which can eliminate the
overhead caused by vmexit or syscall.
To ease the userspace modeling of the doorbell layout (usually
virtio-pci), this patch starts from a doorbell per page
model. Vhost-vdpa only support the hardware doorbell that sit at the
boundary of a page and does not share the page with other registers.
Doorbell of each virtqueue must be mapped separately, pgoff is the
index of the virtqueue. This allows userspace to map a subset of the
doorbell which may be useful for the implementation of software
assisted virtqueue (control vq) in the future.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For the device that doesn't use vhost worker and use_mm(), mmget() is
too heavy weight and it may brings troubles for implementing mmap()
support for vDPA device.
This is because, an reference to the address space was held via
mm_get() in vhost_dev_set_owner() and an reference to the file was
held in mmap(). This means when process exits, the mm can not be
released thus we can not release the file.
This patch tries to use mmgrab() instead of mmget(), which allows the
address space to be destroy in process exit without releasing the mm
structure itself. This is sufficient for vDPA device which pin user
pages and does not depend on the address space to work.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vDPA device currently relays the eventfd via vhost worker. This is
inefficient due the latency of wakeup and scheduling, so this patch
tries to introduce a use_worker attribute for the vhost device. When
use_worker is not set with vhost_dev_init(), vhost won't try to
allocate a worker thread and the vhost_poll will be processed directly
in the wakeup function.
This help for vDPA since it reduces the latency caused by vhost worker.
In my testing, it saves 0.2 ms in pings between VMs on a mutual host.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200529080303.15449-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- hid-mcp2221 GPIO support, from Rishi Gupta
- MT_CLS_WIN_8_DUAL obsolete quirk removal from hid-multitouch, from
Kai-Heng Feng
- a bunch of new hardware support to hid-asus driver, from Hans de
Goede
- other assorted small fixes, cleanups and device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Remove MT_CLS_WIN_8_DUAL
HID: multitouch: enable multi-input as a quirk for some devices
HID: sony: Fix for broken buttons on DS3 USB dongles
HID: Add quirks for Trust Panora Graphic Tablet
HID: apple: Swap the Fn and Left Control keys on Apple keyboards
HID: asus: Add depends on USB_HID to HID_ASUS Kconfig option
HID: asus: Fix mute and touchpad-toggle keys on Medion Akoya E1239T
HID: asus: Add support for multi-touch touchpad on Medion Akoya E1239T
HID: asus: Add report_size to struct asus_touchpad_info
HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check
HID: asus: Simplify skipping of mappings for Asus T100CHI keyboard-dock
HID: asus: Only set EV_REP if we are adding a mapping
HID: i2c-hid: add Schneider SCL142ALM to descriptor override
HID: intel-ish-hid: avoid bogus uninitialized-variable warning
HID: mcp2221: add GPIO functionality support
HID: fix typo in Kconfig
HID: logitech: drop outdated references to unifying receivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was another busy development cycle, and the majority of changes are
found in ASoC side. Below are Some highlights.
ASoC core:
- Lots of core cleanups and refactorings, still on-going work by
Morimoto-san
ASoC drivers:
- Continued work on cleaning up and improving the Intel SOF stuff,
along with new platform support including SoundWire
- Fixes to make the Marvell SSPA driver work upstream
- Support for AMD Renoir ACP, Dialog DA7212, Freescale EASRC and
i.MX8M, Intel Elkhard Lake, Maxim MAX98390, Nuvoton NAU8812 and
NAU8814 and Realtek RT1016.
USB-audio:
- Improvement for sync and implicit feedback streams with the more
accurate frame size calculation and full-duplex support
- Support for RME Babyface Pro and Prioneer DJ DJM
HD-audio:
- Fixes for Mic mute LED on HP machines
- Re-enable support of Intel SST driver for SKL/KBL platforms
FireWire:
- Lots of refactoring, add support for RME FireFace and MOTU
UltraLite-mk3"
* tag 'sound-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (428 commits)
ALSA: es1688: Add the missed snd_card_free()
ALSA: hda: add sienna_cichlid audio asic id for sienna_cichlid up
ALSA: usb-audio: Add Pioneer DJ DJM-900NXS2 support
ASoC: qcom: q6asm-dai: kCFI fix
ASoC: soc-card: add snd_soc_card_remove_dai_link()
ASoC: soc-card: add snd_soc_card_add_dai_link()
ASoC: soc-card: add snd_soc_card_set_bias_level_post()
ASoC: soc-card: add snd_soc_card_set_bias_level()
ASoC: soc-card: add snd_soc_card_remove()
ASoC: soc-card: add snd_soc_card_late_probe()
ASoC: soc-card: add snd_soc_card_probe()
ASoC: soc-card: add probed bit field to snd_soc_card
ASoC: soc-card: add snd_soc_card_resume_post()
ASoC: soc-card: add snd_soc_card_resume_pre()
ASoC: soc-card: add snd_soc_card_suspend_post()
ASoC: soc-card: add snd_soc_card_suspend_pre()
ASoC: soc-card: move snd_soc_card_subclass to soc-card
ASoC: soc-card: move snd_soc_card_get_codec_dai() to soc-card
ASoC: soc-card: move snd_soc_card_set/get_drvdata() to soc-card
ASoC: soc-card: move snd_soc_card_jack_new() to soc-card
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia updates from Dominik Brodowski:
"Two minor PCMCIA odd fixes: one replacing zero-length arrays with a
flexible-array member, and one making a local function static"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: make pccard_loop_tuple() static
pcmcia: Replace zero-length array with flexible-array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"New drivers: aw2013, sgm3140, some fixes
Nothing much to see here, next release should be more interesting"
* tag 'leds-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: add aw2013 driver
dt-bindings: leds: Add binding for aw2013
leds: trigger: remove redundant assignment to variable ret
leds: netxbig: Convert to use GPIO descriptors
leds: add sgm3140 driver
dt-bindings: leds: Add binding for sgm3140
leds: ariel: Add driver for status LEDs on Dell Wyse 3020
leds: pwm: check result of led_pwm_set() in led_pwm_add()
leds: tlc591xxt: hide error on EPROBE_DEFER
leds: tca6507: Include the right header
leds: lt3593: Drop surplus include
leds: lp3952: Include the right header
leds: lm355x: Drop surplus include
|
|
- Fix vmd resource address calculation using Host Physical Address shadow
register (Jon Derrick)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Filter resource type bits from shadow register
|
|
- Fix memory leak in probe error paths (Christophe JAILLET)
* remotes/lorenzo/pci/v3-semi:
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
|
|
- Fix error message for failure to get reset GPIO from DT (Pali Rohár)
- Fix runtime PM imbalance on error path (both tegra and tegra194)
(Dinghao Liu)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Fix runtime PM imbalance on error
PCI: tegra194: Fix runtime PM imbalance on error
PCI: tegra: Fix reporting GPIO error value
|
|
- Fix rcar OB window programming (Andrew Murray)
- Add rcar suspend/resume support (Kazufumi Ikeda)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
- Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode
(Lad Prabhakar)
- Move shareable code to pcie-rcar.c (Lad Prabhakar)
- Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar)
- Add endpoint support for multiple outbound memory windows (Lad
Prabhakar)
- Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar)
* remotes/lorenzo/pci/rcar:
MAINTAINERS: Add file patterns for rcar PCI device tree bindings
PCI: rcar: Add endpoint mode support
dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
PCI: endpoint: Add support to handle multiple base for mapping outbound memory
PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
PCI: rcar: Fix calculating mask for PCIEPAMR register
PCI: rcar: Move shareable code to a common file
PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
dt-bindings: pci: rcar: add r8a77961 support
PCI: rcar: Add suspend/resume
PCI: rcar: Fix incorrect programming of OB windows
|
|
- Fix conflicts in pci-bridge-emul descriptions of Device Status and Slot
Control (Jon Derrick)
- Add emulation for more Device Status, Link Control, and Slot Control
bits (Jon Derrick)
- Improve emulation of reserved bits (Jon Derrick)
* remotes/lorenzo/pci/pci-bridge-emul:
PCI: pci-bridge-emul: Eliminate the 'reserved' member
PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0
PCI: pci-bridge-emul: Fix Root Cap/Status comment
PCI: pci-bridge-emul: Fix PCIe bit conflicts
|
|
- Release resource in probe failure path (Wei Hu)
- Retry PCI bus D0 entry if device state is invalid (Wei Hu)
- Use struct_size() to help avoid type mistakes (Gustavo A. R. Silva)
* remotes/lorenzo/pci/hv:
PCI: hv: Use struct_size() helper
PCI: hv: Retry PCI bus D0 entry on invalid device state
PCI: hv: Fix the PCI HyperV probe failure path to release resource properly
|
|
- Constify struct pci_ecam_ops (Rob Herring)
- Support building as modules (Rob Herring)
- Eliminate wrappers for pci_host_common_probe() by using DT match table
data (Rob Herring)
* remotes/lorenzo/pci/host-generic:
PCI: host-generic: Eliminate pci_host_common_probe wrappers
PCI: host-generic: Support building as modules
PCI: Constify struct pci_ecam_ops
# Conflicts:
# drivers/pci/controller/dwc/pcie-hisi.c
|
|
- Avoid NULL pointer dereference in dma_release_channel() (Kunihiko
Hayashi)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: functions/pci-epf-test: Fix DMA channel release
|
|
- Simplify computation of msix_tbl (Jiri Slaby)
- Make hisi_pcie_platform_ops static (Zou Wei)
- Warn about resources above 4G (Alan Mikhak)
- Make intel_pcie_cpu_addr() static (Jason Yan)
- Use devm_platform_ioremap_resource_byname() to simplify code and
improve error checking (Wei Yongjun)
- Fix inner MSI IRQ domain registration so it doesn't confuse debugfs
(Marc Zyngier)
- Don't use FAST_LINK_MODE on meson (Marc Zyngier)
- Add Socionext UniPhier Pro5 PCIe endpoint controller driver and DT
description (Kunihiko Hayashi)
* remotes/lorenzo/pci/dwc:
PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
PCI: dwc: Fix inner MSI IRQ domain registration
PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
PCI: dwc: intel: Make intel_pcie_cpu_addr() static
PCI: dwc: Program outbound ATU upper limit register
PCI: dwc: Make hisi_pcie_platform_ops static
PCI: dwc: Clean up computing of msix_tbl
|
|
- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits'
bindings in favor of deriving them from 'ranges' and 'dma-ranges'
(Kishon Vijay Abraham I)
- Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
|
|
- Assert fundamental reset on initialization (Nicolas Saenz Julienne)
- Remove unnecessary clk_put(); devm_clk_get() handles this automatically
(Jim Quinlan)
- Fix outbound memory window register stride offset (Jim Quinlan)
- Add "aspm-no-l0s" property for brcmstb and disable ASPM L0s when
present (Jim Quinlan)
- Add property to notify Raspberry Pi firmware of xHCI reset (Nicolas
Saenz Julienne)
- Add Raspberry Pi VL805 xHCI init function to trigger VL805 firmware
load (Nicolas Saenz Julienne)
- Wait in brcmstb probe for Raspberry Pi VL805 firmware initialization
(Nicolas Saenz Julienne)
- Load Raspberry Pi VL805 firmware in USB early handoff quirk (Nicolas
Saenz Julienne)
* remotes/lorenzo/pci/brcmstb:
USB: pci-quirks: Add Raspberry Pi 4 quirk
PCI: brcmstb: Wait for Raspberry Pi's firmware when present
firmware: raspberrypi: Introduce vl805 init routine
soc: bcm2835: Add notify xHCI reset property
PCI: brcmstb: Disable L0s component of ASPM if requested
dt-bindings: PCI: brcmstb: New prop 'aspm-no-l0s'
PCI: brcmstb: Fix window register offset from 4 to 8
PCI: brcmstb: Don't clk_put() a managed clock
PCI: brcmstb: Assert fundamental reset on initialization
|
|
- Fix altera whitespace (Colin Ian King)
* remotes/lorenzo/pci/altera:
PCI: altera: Clean up indentation issue on a return statement
|
|
- Train link immediately after enabling link training to avoid issues
with Compex WLE900VX and Turris MOX devices (Pali Rohár)
- Remove ASPM config and let the PCI core do it (Pali Rohár)
- Interpret zero 'max-link-speed' value as invalid (Pali Rohár)
- Respect the 'max-link-speed' property and improve link training (Marek
Behún)
- Issue PERST via GPIO (Pali Rohár)
- Add PHY support (Marek Behún)
- Use standard PCIe capability macros (Pali Rohár)
- Document new 'max-link-speed', 'phys', and 'reset-gpios' properties
(Marek Behún)
* remotes/lorenzo/pci/aardvark:
dt-bindings: PCI: aardvark: Describe new properties
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
PCI: aardvark: Add PHY support
PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access
PCI: aardvark: Issue PERST via GPIO
PCI: aardvark: Improve link training
PCI: of: Zero max-link-speed value is invalid
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
PCI: aardvark: Train link immediately after enabling training
|
|
- Remove unused xen_register_pirq() parameter (Wei Liu)
- Quirk AMD Matisse HD Audio & USB 3.0 devices where FLR hangs the device
(Marcos Scriven)
- Quirk AMD Starship USB 3.0 device where FLR doesn't seem to work (Kevin
Buettner)
- Add ACS quirk for Intel RCiEPs (Ashok Raj)
* pci/virtualization:
PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
PCI: Avoid FLR for AMD Starship USB 3.0
PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
|
|
- Fix a minor bool type issue (Krzysztof Wilczynski)
* pci/switchtec:
PCI/switchtec: Correct bool variable type assignment
|
|
- Allow resizing BARs of devices on root bus (Ard Biesheuvel)
* pci/resource:
PCI: Allow pci_resize_resource() for devices on root bus
|
|
- Check .bridge_d3() hook for NULL before calling it (Bjorn Helgaas)
- Disable PME# for Pericom OHCI/UHCI USB controllers because it's
not reliably asserted on USB hotplug (Kai-Heng Feng)
- Assume ports without DLL Link Active train links in 100 ms to work
around Thunderbolt bridge defects (Mika Westerberg)
* pci/pm:
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
PCI/PM: Adjust pcie_wait_for_link_delay() for caller delay
PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect
serial: 8250_pci: Move Pericom IDs to pci_ids.h
PCI/PM: Call .bridge_d3() hook only if non-NULL
|
|
- Add AMD Zen Raven and Renoir Root Ports to P2PDMA whitelist (Alex
Deucher)
* pci/p2pdma:
PCI/P2PDMA: Add AMD Zen Raven and Renoir Root Ports to whitelist
|
|
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas)
- Check for platform_get_irq() failure consistently (Bjorn Helgaas)
- Replace zero-length array with flexible-array (Gustavo A. R. Silva)
- Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang)
- Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun
Lee)
- Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang)
- Rename _DSM constants to align with spec (Krzysztof Wilczyński)
* pci/misc:
PCI: Rename _DSM constants to align with spec
PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove()
x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs
PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()
PCI: Replace zero-length array with flexible-array
PCI: Check for platform_get_irq() failure consistently
driver core: platform: Clarify that IRQ 0 is invalid
|
|
- Remove unnecessary "default y" Kconfig options (Bjorn Helgaas)
* pci/kconfig:
PCI/AER: Don't select CONFIG_PCIEAER by default
PCI: keystone: Don't select CONFIG_PCI_KEYSTONE_HOST by default
PCI: dra7xx: Don't select CONFIG_PCI_DRA7XX_HOST by default
|
|
- Remove unused pciehp EMI() and HP_SUPR_RM() macros (Ani Sinha)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Convert shpchp_unconfigure_device() to void (Krzysztof Wilczynski)
* pci/hotplug:
PCI: shpchp: Make shpchp_unconfigure_device() void
PCI: Use of_node_name_eq() for node name comparisons
PCI: pciehp: Remove unused EMI() and HP_SUPR_RM() macros
|
|
- Log only ACPI_NOTIFY_DISCONNECT_RECOVER events for EDR, not all ACPI
SYSTEM-level events (Kuppuswamy Sathyanarayanan)
- Rely only on _OSC (not _OSC + HEST FIRMWARE_FIRST) to negotiate AER
Capability ownership (Alexandru Gagniuc)
- Remove HEST/FIRMWARE_FIRST parsing that was previously used to help
intuit AER Capability ownership (Kuppuswamy Sathyanarayanan)
- Remove redundant pci_is_pcie() and dev->aer_cap checks (Kuppuswamy
Sathyanarayanan)
- Print IRQ number used by DPC (Yicong Yang)
* pci/error:
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI/AER: Use only _OSC to determine AER ownership
PCI/EDR: Log only ACPI_NOTIFY_DISCONNECT_RECOVER events
|
|
- Fix pci_register_host_bridge() device_register() error handling (Rob
Herring)
- Fix pci_host_bridge struct device release/free handling (Rob Herring)
- Program MPS for RCiEP devices (Ashok Raj)
- Inherit PTM settings from Switch Upstream Port so we can enable PTM on
Endpoints (Bjorn Helgaas)
- Add #defines for bridge windows (PCI_BRIDGE_IO_WINDOW,
PCI_BRIDGE_MEM_WINDOW, etc) (Krzysztof Wilczynski)
* pci/enumeration:
pcmcia: Use CardBus window names (PCI_CB_BRIDGE_IO_0_WINDOW etc) when freeing
PCI: Use bridge window names (PCI_BRIDGE_IO_WINDOW etc)
PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port
PCI: Program MPS for RCiEP devices
PCI: Fix pci_host_bridge struct device release/free handling
PCI: Fix pci_register_host_bridge() device_register() error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add notifier for update, and register port partner
Sensors/iio:
- Fixes to cros_ec_sensorhub around allocation of resources, and
send_sample
Wilco EC:
- Fix to output format of h1_gpio
Misc:
- Misc fixes to appease kernel-doc and other warnings
- Set user space log size in chromeos_pstore"
* tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_usbpd_logger: Add __printf annotation to append_str()
platform/chrome: cros_ec_i2c: Appease the kernel-doc deity
platform/chrome: typec: Fix ret value check error
platform/chrome: cros_ec_typec: Register port partner
platform/chrome: cros_ec_typec: Add struct for port data
platform/chrome: cros_ec_typec: Use notifier for updates
platform/chrome: cros_ec_ishtp: free ishtp buffer before sending event
platform/chrome: cros_ec_ishtp: skip old cros_ec responses
platform/chrome: wilco_ec: Provide correct output format to 'h1_gpio' file
platform/chrome: chromeos_pstore: set user space log size
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add new arm_smc_wdt watchdog driver
- da9062 and da9063 improvements
- clarify documentation about stop() that became optional
- document r8a7742 support
- some overall fixes and improvements
* tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: m54xx: Add missing include
dt-bindings: watchdog: renesas,wdt: Document r8a7742 support
watchdog: Fix runtime PM imbalance on error
watchdog: riowd: remove unneeded semicolon
watchdog: Add new arm_smc_wdt watchdog driver
dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
watchdog: imx2_wdt: update contact email
watchdog: iTCO: fix link error
watchdog: da9062: No need to ping manually before setting timeout
watchdog: da9063: Make use of pre-configured timeout during probe
watchdog: da9062: Initialize timeout during probe
watchdog: clarify that stop() is optional
watchdog: imx_sc_wdt: Fix reboot on crash
watchdog: ts72xx_wdt: fix build error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Add backlight_device_get_by_name() to the API
New Device Support:
- Add support for WLED5 to Qualcomm WLED
Fix-ups:
- Convert to GPIO descriptors in l4f00242t03
- Device Tree fix-ups for qcom-wled
Bug Fixes:
- Properly disable regulators on .probe() failure"
* tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Add backlight_device_get_by_name()
backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs
dt-bindings: backlight: qcom-wled: Add WLED5 bindings
backlight: qcom-wled: Add callback functions
dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format
backlight: l4f00242t03: Convert to GPIO descriptors
backlight: lp855x: Ensure regulators are disabled on probe failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Constify 'properties' attribute in core header file
New Drivers:
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
Fix-ups:
- Use new I2C API in htc-i2cpld
- Remove superfluous code in sprd-sc27xx-spi
- Improve error handling in stm32-timers
- Device Tree additions/fixes in mt6397
- Defer probe betterment in wm8994-core
- Improve module handling in wm8994-core
- Staticify in stpmic1
- Trivial (spelling, formatting) in tqmx86
Bug Fixes:
- Fix incorrect register/PCI IDs in intel-lpss-pci
- Fix unbalanced Regulator API calls in wm8994-core
- Fix double free() in wcd934x
- Remove IRQ domain on failure in stmfx
- Reset chip on resume in stmfx
- Disable/enable IRQs on suspend/resume in stmfx
- Do not use bulk writes on H/W which does not support them in max77620"
* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
mfd: Add support for PMIC MT6360
mfd: max77620: Use single-byte writes on MAX77620
mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
mfd: stmfx: Fix stmfx_irq_init error path
mfd: stmfx: Reset chip on resume as supply was disabled
mfd: wm8994: Silence warning about supplies during deferred probe
mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
mfd: wm8994: Fix driver operation if loaded as modules
dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
mfd: Constify properties in mfd_cell
mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
mfd: sprd: Remove unnecessary spi_bus_type setting
mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
mfd: stpmic1: Make stpmic1_regmap_config static
mfd: htc-i2cpld: Convert to use i2c_new_client_device()
MAINTAINERS: Add entry for mp2629 Battery Charger driver
power: supply: mp2629: Add impedance compensation config
...
|
|
The IS_ENABLED() use was missing the CONFIG_ prefix which would have
lead to skipping this code.
Fixes: 3ad1f3a33286 ("pwm: Implement some checks for lowlevel drivers")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Link: https://lore.kernel.org/r/20200529234028.46373-4-viro@ZenIV.linux.org.uk
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
No need for building a native struct on kernel stack, copying it to
userland one, then calling hpsa_ioctl() which copies it back into _another_
instance of the same struct.
Link: https://lore.kernel.org/r/20200529234028.46373-3-viro@ZenIV.linux.org.uk
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
"BIG" in the name refers to the amount of data being transferred, _not_ the
size of structure itself; it's 140 or 144 bytes (for 32bit and 64bit hosts
resp.). IOCTL_Command_struct is 136 or 144 bytes large...
No point whatsoever turning that into dynamic allocation, let alone vmalloc
one. Just keep it as local variable...
Link: https://lore.kernel.org/r/20200529234028.46373-2-viro@ZenIV.linux.org.uk
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20200529234028.46373-1-viro@ZenIV.linux.org.uk
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
fully iterated
When a list is completely iterated with 'list_for_each_entry(x, ...)', x is
not NULL at the end.
While at it, remove a useless initialization of the ndev variable. It
is overridden by 'list_for_each_entry'.
Fixes: f2663872f073 ("crypto: cavium - Register the CNN55XX supported crypto algorithms.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current implementation of the multiple accelerator core support for
OMAP SHA does not work properly. It always picks up the first probed
accelerator core if this is available, and rest of the book keeping also
gets confused if there are two cores available. Add proper load
balancing support for SHA, and also fix any bugs related to the
multicore support while doing it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Most of the OMAP family SoCs contain two instances for AES core, which
causes the remove callbacks to be also done twice when driver is
removed. Fix the algorithm unregister callbacks to take into account the
number of algorithms still registered to avoid removing these twice.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
With very small data sizes, the whole data can end up in the xmit
buffer. This code path does not set the sg_len properly which causes the
core dma framework to crash. Fix by adding the proper size in place.
Also, the data length must be a multiple of block-size, so extend the
DMA data size while here.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ctx internal buffer can only hold buflen amount of data, don't try
to copy over more than that. Also, initialize the context sg pointer
if we only have data in the context internal buffer, this can happen
when closing a hash with certain data amounts.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case buffers are copied from userspace, directly accessing the page
will most likely fail because it hasn't been mapped into the kernel
memory space. Fix the issue by forcing a kmap / kunmap within the
cleanup functionality.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As the hardware acceleration for the omap-sham algos is not available
from userspace, force kernel driver usage. Without this flag in place,
openssl 1.1 implementation thinks it can accelerate sha algorithms on
omap devices directly from userspace.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
