summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-02-10Merge tag 'usb-serial-5.12-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.12-rc1 Here are the USB-serial updates for 5.12-rc1, including: - a line-speed fix for newer pl2303 devices - a line-speed fix for FTDI FT-X devices - a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode) - a cdc-acm blacklist entry for when the xr_serial driver is enabled - cp210x support for software flow control - various cp210x modem-control fixes - an updated ZTE P685M modem entry to stop claiming the QMI interface - an update to drop the port_remove() driver-callback return value Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits) USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition USB: serial: option: update interface mapping for ZTE P685M USB: serial: ftdi_sio: restore divisor-encoding comments USB: serial: ftdi_sio: fix FTX sub-integer prescaler USB: serial: cp210x: clean up auto-RTS handling USB: serial: cp210x: fix RTS handling USB: serial: cp210x: clean up printk zero padding USB: serial: cp210x: clean up flow-control debug message USB: serial: cp210x: drop shift macros USB: serial: cp210x: fix modem-control handling USB: serial: cp210x: suppress modem-control errors USB: serial: mos7720: fix error code in mos7720_write() USB: serial: xr: fix B0 handling USB: serial: xr: fix pin configuration USB: serial: xr: fix gpio-mode handling USB: serial: xr: simplify line-speed logic USB: serial: xr: clean up line-settings handling USB: serial: xr: document vendor-request recipient ...
2021-02-10sd_zbc: clear zone resources for non-zoned caseDamien Le Moal
For host-aware ZBC disk, setting the device zoned model to BLK_ZONED_HA using blk_queue_set_zoned() in sd_read_block_characteristics() may result in the block device effective zoned model to be "none" (BLK_ZONED_NONE) if partitions are present on the device. In this case, sd_zbc_read_zones() should not setup the zone related queue limits for the disk so that the device limits and configuration is consistent with a regular disk and resources not uselessly allocated (e.g. the zone write pointer tracking array for zone append emulation). Furthermore, if the disk zoned model changes at run time due to the creation of a partition by the user, the zone related resources can be released. Fix both problems by introducing the function sd_zbc_clear_zone_info() to reset the scsi disk zone information and free resources and by returning early in sd_zbc_read_zones() for a block device that has a zoned model equal to BLK_ZONED_NONE. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10block: introduce zone_write_granularity limitDamien Le Moal
Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that all writes into sequential write required zones be aligned to the device physical block size. However, NVMe ZNS does not have this constraint and allows write operations into sequential zones to be aligned to the device logical block size. This inconsistency does not help with software portability across device types. To solve this, introduce the zone_write_granularity queue limit to indicate the alignment constraint, in bytes, of write operations into zones of a zoned block device. This new limit is exported as a read-only sysfs queue attribute and the helper blk_queue_zone_write_granularity() introduced for drivers to set this limit. The function blk_queue_set_zoned() is modified to set this new limit to the device logical block size by default. NVMe ZNS devices as well as zoned nullb devices use this default value as is. The scsi disk driver is modified to execute the blk_queue_zone_write_granularity() helper to set the zone write granularity of host-managed SMR disks to the disk physical block size. The accessor functions queue_zone_write_granularity() and bdev_zone_write_granularity() are also introduced. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nullb: use blk_queue_set_zoned() to setup zoned devicesDamien Le Moal
Use blk_queue_set_zoned() to set a nullb device zone model instead of directly assigning the device queue zoned limit. This initialization of the devicve zoned model as well as the setup of the queue flag QUEUE_FLAG_ZONE_RESETALL and of the device queue elevator feature are moved from null_init_zoned_dev() to null_register_zoned_dev() so that the initialization of the queue limits is done when the gendisk of the nullb device is available. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10nvme: cleanup zone information initializationDamien Le Moal
For a zoned namespace, in nvme_update_ns_info(), call nvme_update_zone_info() after executing nvme_update_disk_info() so that the namespace queue logical and physical block size limits are set. This allows setting the namespace queue max_zone_append_sectors limit in nvme_update_zone_info() instead of nvme_revalidate_zones(), simplifying this function. Also use blk_queue_set_zoned() to set the namespace zoned model. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10Revert "drm/scheduler: Job timeout handler returns status (v3)"Maarten Lankhorst
This reverts commit c10983e14e8f5d7c8dab0415e0cb7fe8d10aa9e3. This commit is not meant for drm-misc-next-fixes, and was accidentally cherry picked over. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-10gpio: ep93xx: Fix single irqchip with multi gpiochipsNikita Shubin
Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip") Cc: <stable@vger.kernel.org> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: ep93xx: fix BUG_ON port F usageNikita Shubin
Two index spaces and ep93xx_gpio_port are confusing. Instead add a separate struct to store necessary data and remove ep93xx_gpio_port. - add struct to store IRQ related data for each IRQ capable chip - replace offset array with defined offsets - add IRQ registers offset for each IRQ capable chip into ep93xx_gpio_banks ------------[ cut here ]------------ kernel BUG at drivers/gpio/gpio-ep93xx.c:64! ---[ end trace 3f6544e133e9f5ae ]--- Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10s390: Use arch_local_irq_{save,restore}() in early boot codeSven Schnelle
Commit 997acaf6b4b5 ("lockdep: report broken irq restoration") makes compiling s390 fail because the irq enable/disable functions are now no longer fully contained in header files. Fixes: 997acaf6b4b5 ("lockdep: report broken irq restoration") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2021-02-10gpio: mxs: GPIO_MXS should not default to y unconditionallyGeert Uytterhoeven
Merely enabling CONFIG_COMPILE_TEST should not enable additional code. To fix this, restrict the automatic enabling of GPIO_MXS to ARCH_MXS, and ask the user in case of compile-testing. Fixes: 6876ca311bfca5d7 ("gpio: mxs: add COMPILE_TEST support for GPIO_MXS") Cc: <stable@vger.kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10PCI: cadence: Retrain Link to work around Gen2 training defectNadeem Athani
Cadence controller will not initiate autonomous speed change if strapped as Gen2. The Retrain Link bit is set as quirk to enable this speed change. Link: https://lore.kernel.org/r/20210209144622.26683-3-nadeem@cadence.com Signed-off-by: Nadeem Athani <nadeem@cadence.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-02-10iwlwifi:mvm: Add support for version 2 of the LARI_CONFIG_CHANGE command.Miri Korenblit
Add support for version 2 of the LARI_CONFIG_CHANGE command. this is needed to support UHB enable/disable from BIOS Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.8a0c951bfdea.I850f29d3ff3931388447bda635dfbc742ea1df61@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: don't crash when rx queues aren't allocated in interruptEmmanuel Grumbach
WARNING is better than crashing. Since this happened to me, be on the safe side. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.d4651427fcda.I1bcecb73676d039e2521309c07fc6b6314a90546@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: correction of group-id once sending REPLY_ERRORMukesh Sisodiya
Once sending the REPLY_ERROR group ID is not set and this lead to get it set to wrong value LONG_GROUP later in default handling Fix this by checking the REPLY_ERROR and avoid changing the Group ID Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.82578caaea84.I0ca9cfdd4e656d2e88ee7696dd6baf4267e7cb52@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: add AX201 and AX211 radio modules for Ma devicesMatti Gottlieb
Add support for AX201 and AX211 radio modules, which we call HR2 and GF, respectively. These modules can be used with the Ma family of devices and above. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.f8e3080ce633.I7377b421b031796730daf809c4024a3c3ef95fa8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: add CDB bit to the device configuration parsingMatti Gottlieb
Some new devices contain an extra bit in the CRF ID register to denote that they support CDB. Add definitions and macros to be able to support it and add the "NO_CDB" to all existing entired. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.7b40184d9899.I3bb2cf9b9afb0457583f786dc52d4d1b1ad75ffc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: acpi: don't return valid pointer as an ERR_PTRHaim Dreyfuss
iwl_acpi_get_wifi_pkg() may return a valid pointer (meaning success), while `tbl_rev` is invalid (equel to 1). In this case, we will treat that as an error. Subsequent "users" of this "error code" may either check for nonzero (good; pointers are never zero) or negative (bad; pointers may be "positive") fix that by splitting the if statement. First check if IS_ERR(wifi_pkg) and then if tbl_rev != 0. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.1c8c4b58c932.I147373f6fd364606b0282af8d402c722eb917225@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: queue: add fake tx time pointMordechay Goodstein
In case we get TX sequence number out of range, trigger fake tx time point to collect FW debug data. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.e098026e83ad.I8870fcbc504a74cab6a50134b3df1131d6da946d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: remove flags argument for nic_accessJohannes Berg
Since we no longer save interrupts, we no longer need the flags argument here, remove it throughout. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.8de8fe6f9fff.If040b056d0e8c771c65ac5c29230f939354a142b@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: declare support for triggered SU/MU beamforming feedbackNaftali Goldstein
The NIC supports this, so set the relevant bits in the HE PHY capabilities. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.24212c1aac90.I82f6c1bdb9fe351ce46e8cc8ec6da221908dec45@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: dbg: add op_mode callback for collecting debug data.Mordechay Goodstein
The first use is collecting debug data when transport stops the device. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.d282d0a9ee7b.I9a0ad29f80daba8956a6aa077ba865e19b2150be@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: api: clean up some documentation/bitsJohannes Berg
Clean up some documentation references and some bits in the enums to make the documentation more useful. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.941d963ceb88.I72a89c0161d7beab99bc3a90707796c2a63e4197@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: dbg: remove unsupported regionsMordechay Goodstein
In case user requested to register an unsupported regions, remove it from active list and trigger list, this saves operational driver memory and run time at collecting debug data. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210142629.a0cc944040e8.I3ae37547452b39f8040428c21ed47bdc67ae8f71@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: Change Ma device IDMatti Gottlieb
The Ma device ID needs to be 0x7E40 instead of 0x7E80. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.a97272169e3f.Ic4acfb3f7b4e9d7b49c9c0b9a31c9a305d4d9fcc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: when HW has rate offload don't look at control fieldMordechay Goodstein
Control field is set by mac80211 only if case rate is not offloaded to hw. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.f845c4387eed.I30c4d26698bae1f5f8c396da80a545baa145e2ad@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: NULLify pointers after freeEmmanuel Grumbach
Remember that those pointers have been freed by setting them to NULL. Otherwise, we'd keep rxq pointing to random memory which would prevent us from trying to re-allocate the Rx resources if we call rx_alloc again. Also, propagate the allocation failure to the caller of iwl_pcie_nic_init so that we won't go further in the start flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.996b400d2f1c.I630379c504644700322f57b259383ae0af8d1975@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: assign SAR table revision to the command laterLuca Coelho
The call to iwl_sar_geo_init() was moved to the end of the iwl_mvm_sar_geo_init() function, after the table revision is assigned to the FW command. But the revision is only known after iwl_sar_geo_init() is called, so we were always assigning zero to it. Fix that by moving the assignment code after the iwl_sar_geo_init() function is called. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: 45acebf8d6a6 ("iwlwifi: fix sar geo table initialization") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.cef55ef3a065.If96c60f08d24c2262c287168a6f0dbd7cf0f8f5c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: remove useless iwl_mvm_resume_d3() functionJohannes Berg
This is called exactly once, a few lines down, so there's no point in having the extra function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.1ef80bf3008c.I0b5349530182b5616a4149dd596f95aa54ea724c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: enhance a print in CSA flowsEmmanuel Grumbach
Add the count and the mode to the modify CSA flow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.361bc0f024ef.I904f269858b3123b7d6532f049c7f92b63fb8807@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: send stored PPAG command instead of localLuca Coelho
Some change conflicts apparently cause a confusion between a local variable being used to send the PPAG command and the introduction of a union for this command. Most parts of the local command were never copied from the stored data, so the FW was getting garbage in the tables instead of getting valid values. Fix this by completely removing the local and using only the union that we have stored in fwrt. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.d090e0301023.I7d57f4d7da9a3297734c51cf988199323c76916d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: store PPAG enabled/disabled flag properlyLuca Coelho
When reading the PPAG table from ACPI, we should store everything in our fwrt structure, so it can be accessed later. But we had a local ppag_table variable in the function and were erroneously storing the enabled/disabled flag in it instead of storing it in the fwrt. Fix this by removing the local variable and storing everything directly in fwrt. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f2134f66f40e ("iwlwifi: acpi: support ppag table command v2") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.889862e6d393.I8b894c1b2b3fe0ad2fb39bf438273ea47eb5afa4@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: mvm: fix the type we use in the PPAG table validity checksLuca Coelho
The value we receive from ACPI is a long long unsigned integer but the values should be treated as signed char. When comparing the received value with ACPI_PPAG_MIN_LB/HB, we were doing an unsigned comparison, so the negative value would actually be treated as a very high number. To solve this issue, assign the value to our table of s8's before making the comparison, so the value is already converted when we do so. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.b0ec69f312bc.If77fd9c61a96aa7ef2ac96d935b7efd7df502399@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: acpi: fix PPAG table sizesLuca Coelho
We were erroneously adding 3 extra values to the table size calculation, when we should actually add only a 2 (one for the domain type and one for the enabled/disabled flag). Fix this for both revisions we support. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.9d037b8f5098.I3c88af130d9e270517c8bac8eb02e11f817fe959@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: don't disable interrupts for reg_lockJohannes Berg
The only thing we do touching the device in hard interrupt context is, at most, writing an interrupt ACK register, which isn't racing in with anything protected by the reg_lock. Thus, avoid disabling interrupts here for potentially long periods of time, particularly long periods have been observed with dumping of firmware memory (leading to lockup warnings on some devices.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.da916ab91298.I064c3e7823b616647293ed97da98edefb9ce9435@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: pcie: add a few missing entries for So with HrLuca Coelho
Some devices were missing from the So with Hr section. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210210135352.71da7ce27261.I0d96fe7b799527c49f1270ddf9acdb152bdd4841@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: dbg: Mark ucode tlv data as constTakashi Iwai
The ucode TLV data may be read-only and should be treated as const pointers, but currently a few code forcibly cast to the writable pointer unnecessarily. This gave developers a wrong impression as if it can be modified, resulting in crashing regressions already a couple of times. This patch adds the const prefix to those cast pointers, so that such attempt can be caught more easily in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20210112132449.22243-3-tiwai@suse.de Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-02-10iwlwifi: add new cards for So and Qu familyIhab Zhaika
add few PCI ID'S for So with Hr and Qu with Hr in AX family. Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210206130110.6f0c1849f7dc.I647b4d22f9468c2f34b777a4bfa445912c6f04f0@changeid
2021-02-10soc: aspeed: socinfo: Add new systemsJoel Stanley
Aspeed's u-boot sdk has been updated with the SoC IDs for the AST2605 variant, as well as A2 and A3 variants of the 2600 family. >From u-boot's arch/arm/mach-aspeed/ast2600/scu_info.c: SOC_ID("AST2600-A0", 0x0500030305000303), SOC_ID("AST2600-A1", 0x0501030305010303), SOC_ID("AST2620-A1", 0x0501020305010203), SOC_ID("AST2600-A2", 0x0502030305010303), SOC_ID("AST2620-A2", 0x0502020305010203), SOC_ID("AST2605-A2", 0x0502010305010103), SOC_ID("AST2600-A3", 0x0503030305030303), SOC_ID("AST2620-A3", 0x0503020305030203), SOC_ID("AST2605-A3", 0x0503010305030103), Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Link: https://lore.kernel.org/r/20210210114651.334324-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-10USB: quirks: sort quirk entriesJohan Hovold
Move the last entry to its proper place to maintain the VID/PID sort order. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10drm/sun4i: dw-hdmi: Fix max. frequency for H6Jernej Skrabec
It turns out that reasoning for lowering max. supported frequency is wrong. Scrambling works just fine. Several now fixed bugs prevented proper functioning, even with rates lower than 340 MHz. Issues were just more pronounced with higher frequencies. Fix that by allowing max. supported frequency in HW and fix the comment. Fixes: cd9063757a22 ("drm/sun4i: DW HDMI: Lower max. supported rate for H6") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-6-jernej.skrabec@siol.net
2021-02-10drm/sun4i: Fix H6 HDMI PHY configurationJernej Skrabec
As it turns out, vendor HDMI PHY driver for H6 has a pretty big table of predefined values for various pixel clocks. However, most of them are not useful/tested because they come from reference driver code. Vendor PHY driver is concerned with only few of those, namely 27 MHz, 74.25 MHz, 148.5 MHz, 297 MHz and 594 MHz. These are all frequencies for standard CEA modes. Fix sun50i_h6_cur_ctr and sun50i_h6_phy_config with the values only for aforementioned frequencies. Table sun50i_h6_mpll_cfg doesn't need to be changed because values are actually frequency dependent and not so much SoC dependent. See i.MX6 documentation for explanation of those values for similar PHY. Fixes: c71c9b2fee17 ("drm/sun4i: Add support for Synopsys HDMI PHY") Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-5-jernej.skrabec@siol.net
2021-02-10drm/sun4i: dw-hdmi: always set clock rateJernej Skrabec
As expected, HDMI controller clock should always match pixel clock. In the past, changing HDMI controller rate would seemingly worsen situation. However, that was the result of other bugs which are now fixed. Fix that by removing set_rate quirk and always set clock rate. Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-4-jernej.skrabec@siol.net
2021-02-10drm/sun4i: tcon: set sync polarity for tcon1 channelJernej Skrabec
Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
2021-02-10Merge tag 'timers-v5.12-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/events updates from Daniel Lezcano: - Drop dead code on efm32 (Uwe Kleine-König) - Move pr_fmt() before the includes on davinci driver (Bartosz Golaszewski) - Clarified timer interrupt must be specified on nuvoton DT bindings (Jonathan Neuschäfer) - Remove tango, sirf, u300 and atlas timer drivers (Arnd Bergman) - Add suspend/resume on pit64b (Claudiu Beznea) Link: https://lore.kernel.org/r/3747fbde-134f-5e1d-47d5-8776c1a52aa1@linaro.org
2021-02-10soc: aspeed: snoop: Add clock control logicJae Hyun Yoo
If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC SNOOP block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupt in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub-nodes should enable LCLK individually so this patch adds clock control logic into the LPC SNOOP driver. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com> Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-10Merge tag 'phy-fixes2-5.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: second round of phy fixes for v5.11 - rockchip: init return and vednor prefix to dt-property - cpcap: bool conversion fix - lantiq: clock enable fix - lgm: kconfig depends on x86 - mediatek: add mising MODULE_DEVICE_TABLE() * tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: Add missing MODULE_DEVICE_TABLE() phy: phy-brcm-sata: remove unneeded semicolon phy: USB_LGM_PHY should depend on X86 phy: lantiq: rcu-usb2: wait after clock enable phy: rockchip: emmc, add vendor prefix to dts properties devicetree: phy: rockchip-emmc optional add vendor prefix phy: cpcap-usb: remove unneeded conversion to bool phy: rockchip-emmc: emmc_phy_init() always return 0
2021-02-10Merge tag 'spi-nor/for-5.12' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Add non-uniform erase fixes. - Add Global Block Unlock command. It is defined by few flash vendors, and it is used for now just by sst. SPI NOR controller drivers changes: - intel-spi: Add support for Intel Alder Lake-P SPI serial flash. - hisi-sfc: Put child node np on error path.
2021-02-10Merge tag 'nand/for-5.12' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND controller drivers: * Intel: Fix an error handling path in 'ebu_dma_start()' * Tango: Remove the driver * Marvell: Convert comma to semicolon * MXC: Convert comma to semicolon * Qcom: Add support for Qcom SMEM parser Related MTD changes: * parsers: Add Qcom SMEM parser
2021-02-10drm/i915: Fix overlay frontbuffer trackingVille Syrjälä
We don't have a persistent fb holding a reference to the frontbuffer object, so every time we do the get+put we throw the frontbuffer object immediately away. And so the next time around we get a pristine frontbuffer object with bits==0 even for the old vma. This confuses the frontbuffer tracking code which understandably expects the old frontbuffer to have the overlay's bit set. Fix this by hanging on to the frontbuffer reference until the next flip. And just to make this a bit more clear let's track the frontbuffer explicitly instead of just grabbing it via the old vma. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 553c23bdb4775130f333f07a51b047276bc53f79) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-02-10mhi: Fix double dma freeLoic Poulain
mhi_deinit_chan_ctxt functionthat takes care of unitializing channel resources, including unmapping coherent MHI areas, can be called from different path in case of controller unregistering/removal: - From a client driver remove callback, via mhi_unprepare_channel - From mhi_driver_remove that unitialize all channels mhi_driver_remove() |-> driver->remove() | |-> mhi_unprepare_channel() | |-> mhi_deinit_chan_ctxt() |... |-> mhi_deinit_chan_ctxt() This leads to double dma freeing... Fix that by preventing deinit for already uninitialized channel. Link: https://lore.kernel.org/r/1612894264-15956-1-git-send-email-loic.poulain@linaro.org Fixes: a7f422f2f89e ("bus: mhi: Fix channel close issue on driver remove") Reported-by: Kalle Valo <kvalo@codeaurora.org> Tested-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210210082538.2494-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:53:55 +0000