summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-06-23crypto: marvell - Add a complete operation for async requestsRomain Perier
So far, the 'process' operation was used to check if the current request was correctly handled by the engine, if it was the case it copied information from the SRAM to the main memory. Now, we split this operation. We keep the 'process' operation, which still checks if the request was correctly handled by the engine or not, then we add a new operation for completion. The 'complete' method copies the content of the SRAM to memory. This will soon become useful if we want to call the process and the complete operations from different locations depending on the type of the request (different cleanup logic). Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Move tdma chain out of mv_cesa_tdma_req and remove itRomain Perier
Currently, the only way to access the tdma chain is to use the 'req' union from a mv_cesa_{ablkcipher,ahash}. This will soon become a problem if we want to handle the TDMA chaining vs standard/non-DMA processing in a generic way (with generic functions at the cesa.c level detecting whether the request should be queued at the DMA level or not). Hence the decision to move the chain field a the mv_cesa_req level at the expense of adding 2 void * fields to all request contexts (including non-DMA ones) and to remove the type completly. To limit the overhead, we get rid of the type field, which can now be deduced from the req->chain.first value. Once these changes are done the union is no longer needed, so remove it and move mv_cesa_ablkcipher_std_req and mv_cesa_req to mv_cesa_ablkcipher_req directly. There are also no needs to keep the 'base' field into the union of mv_cesa_ahash_req, so move it into the upper structure. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Copy IV vectors by DMA transfers for acipher requestsRomain Perier
Add a TDMA descriptor at the end of the request for copying the output IV vector via a DMA transfer. This is a good way for offloading as much as processing as possible to the DMA and the crypto engine. This is also required for processing multiple cipher requests in chained mode, otherwise the content of the IV vector would be overwritten by the last processed request. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Fix wrong type check in dma functionsRomain Perier
So far, the way that the type of a TDMA operation was checked was wrong. We have to use the type mask in order to get the right part of the flag containing the type of the operation. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Check engine is not already running when enabling a reqRomain Perier
Add a BUG_ON() call when the driver tries to launch a crypto request while the engine is still processing the previous one. This replaces a silent system hang by a verbose kernel panic with the associated backtrace to let the user know that something went wrong in the CESA driver. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23crypto: marvell - Add a macro constant for the size of the crypto queueRomain Perier
Adding a macro constant to be used for the size of the crypto queue, instead of using a numeric value directly. It will be easier to maintain in case we add more than one crypto queue of the same size. Signed-off-by: Romain Perier <romain.perier@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23can: kvaser_usb: Add support for more Kvaser Leaf v2 devicesJimmy Assarsson
This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23pinctrl: baytrail: Fix mingled clock pinsCristina Ciocan
Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23can: fix oops caused by wrong rtnl dellink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23can: fix handling of unmodifiable configuration options fixOliver Hartkopp
With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23ubi: Make recover_peb power cut awareRichard Weinberger
recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Cc: stable@vger.kernel.org Reported-by: Jörg Pfähler <pfaehler@isse.de> Reviewed-by: Jörg Pfähler <pfaehler@isse.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-06-23gpio: make library immune to error pointersLinus Walleij
Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: make sure gpiod_to_irq() returns negative on NULL descLinus Walleij
commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: 104-idi-48: Fix missing spin_lock_init for ack_lockAxel Lin
Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22net/mlx4_en: Avoid unregister_netdev at shutdown flowEran Ben Elisha
This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Fix the return value of a failure in VLAN VID add/killKamal Heib
Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22team: Fix possible deadlock during team enslaveIdo Schimmel
Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22irqchip/aspeed-vic: Add irq controller for AspeedBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/1463064193-2178-3-git-send-email-joel@jms.id.au Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-06-22Merge tag 'gpio-v4.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "More GPIO fixes. Most prominent the gpiod_to_irq() fix brought to my attention by Hans de Goede. The hardening patch is a consequence of the reasoning around that bug. - It was discovered that too many parts of the kernel does not respect gpiod_to_irq() returning zero for an invalid IRQ. While this gets fixed, we need to make it return negative errorcodes again. - Harden the library a bit when passed error pointers. It is a bug to use these, but let's be helpful and warn the users. - Fix an uninitialized spinlock in the 104-idi-48 driver" * tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: make library immune to error pointers gpio: make sure gpiod_to_irq() returns negative on NULL desc gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
2016-06-22mmc: move 'parent' tracking to mmc_blk_dataDan Williams
In preparation for the removal of 'driverfs_dev' from 'struct gendisk', carry this data in mmc_blk_data. It is used for registration of parent disks and partitions. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-22Merge tag 'iio-fixes-for-4.7b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.7 cycle. This includes one tracked regression (Arnd's patch for the ad7606). The other two have I think always been broken. * inv_mpu6050 - Fix a use after free in the ACPI code. * ad5933 - The code for setting the cycles had a bug that meant it was simply wrong. * ad7606_spi - Fix a regression that got introduced in a buggy cleanup of a sparse warning.
2016-06-22pinctrl: tegra: Fix build dependencyAxel Lin
I got below build error: ERROR: "tegra_xusb_padctl_legacy_probe" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined! with below build configuration: CONFIG_ARCH_TEGRA=y CONFIG_PINCTRL_TEGRA_XUSB=y CONFIG_PHY_TEGRA_XUSB=y The problem is below line in drivers/pinctrl/Makefile obj-$(CONFIG_PINCTRL_TEGRA) += tegra/ So even CONFIG_PINCTRL_TEGRA_XUSB=y is set, kbuild still does not compile the code in drivers/pinctrl/tegra folder if !CONFIG_PINCTRL_TEGRA. phy-tegra-xusb.c does not use any symbol from pinctrl-tegra.c, so build pinctrl-tegra.c only when CONFIG_PINCTRL_TEGRA is set. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22gpio: tegra: Make lockdep class file-scopedThierry Reding
Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22pinctrl: single: Fix missing flush of posted write for a wakeirqTony Lindgren
With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22pinctrl: imx: Do not treat a PIN without MUX register as an errorAlexander Shiyan
Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22usb: renesas_usbhs: make usbhs_write32() staticBen Dooks
The usbhs_write32 function is not used outside of the rcar3.c file, so fix the following sparse warning by making it static: drivers/usb/renesas_usbhs/rcar3.c:26:6: warning: symbol 'usbhs_write32' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-06-22phy-sun4i-usb: Fix irq free conditions to match request conditionsHans de Goede
commit 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") changed the condition under which irqs are requested, but omitted matching changes to sun4i_usb_phy_remove(). This commit fixes this. Fixes: 5cf700ac9d50 ("phy: phy-sun4i-usb: Fix optional gpios failing probe") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-06-22PM / devfreq: fix initialization of current frequency in last statusLukasz Luba
Some systems need current frequency from last_status for calculation but it is zeroed during initialization. When the device starts there is no history, but we can assume that the last frequency was the same as the initial frequency (which is also used in 'previous_freq'). The log shows the result of this misinterpreted value. [ 2.042847] ... Failed to get voltage for frequency 0: -34 Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() checkDan Carpenter
Smatch complains because platform_get_resource() returns NULL on error and not an error pointer so the check is wrong. Julia Lawall pointed out that normally we don't check these, because devm_ioremap_resource() has a check for NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: remove double put_deviceMyungJoo Ham
When device_register() returns with error, it has already done put_device() on the input device pointer. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix double call put_deviceCai Zhiyong
1295 */ 1296 void device_unregister(struct device *dev) 1297 { 1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__); 1299 device_del(dev); 1300 put_device(dev); 1301 } 1302 EXPORT_SYMBOL_GPL(device_unregister); 1303 device_unregister is called put_device, there is no need to call put_device(&devfreq->dev) again. Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: fix duplicated kfree on devfreq pointerMyungJoo Ham
device_unregister() calls kfree already. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22PM / devfreq: devm_kzalloc to have dev pointer more preciselyMyungJoo Ham
devm_kzalloc of devfreq's statistics data structure has been using its parent device as the dev allocated for. If a device's devfreq is disabled in run-time, such allocated memory won't be freed. Desginating more precisely with the devfreq device pointer fixes the issue. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-06-22ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table ↵Lv Zheng
loading The new module-level code (MLC) approach invokes MLC on the per-table basis, but the dynamic loading support of this is incorrect because of the lock order: acpi_ns_evaluate acpi_ex_enter_intperter acpi_ns_load_table (triggered by Load opcode) acpi_ns_exec_module_code_list acpi_ex_enter_intperter The regression is introduced by the following commit: Commit: 2785ce8d0da1cac9d8f78615e116cf929e9a9123 ACPICA Commit: 071eff738c59eda1792ac24b3b688b61691d7e7c Subject: ACPICA: Add per-table execution of module-level code This patch fixes this regression by unlocking the interpreter lock before invoking MLC. However, the unlocking is done to the acpi_ns_load_table(), in which the interpreter lock should be locked by acpi_ns_parse_table() but it wasn't. Fixes: 2785ce8d0da1 (ACPICA: Add per-table execution of module-level code) Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-21drm/i915/fbc: Disable on HSW by default for nowLyude
>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 : This was kind of a difficult bug to track down. If you're using a Haswell system running GNOME and you have fbc completely enabled and working, playing videos can result in video artifacts. Steps to reproduce: - Run GNOME - Ensure FBC is enabled and active - Download a movie, I used the ogg version of Big Buck Bunny for this - Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin ! glimagesink` in a terminal - Watch for about over a minute, you'll see small horizontal lines go down the screen. For the time being, disable FBC for Haswell by default. Stefan Richter reported kernel freezes (no video artifacts) when fbc is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE applications, thread begins at https://lkml.org/lkml/2016/4/26/813). We also got reports from Steven Honeyman on openbox+roxterm. v2 (From Paulo): - Add extra information to the commit message - Add Fixes tag - Rebase Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com (cherry picked from commit c7f7e2feffb0294302041507dfd5fc15f01afccc) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-21drm/i915: Revert DisplayPort fast link training featureMika Kahola
It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9d859 ("drm/i915: DP link training optimization") and 4e96c97742f4 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9d859 ("drm/i915: DP link training optimization") Fixes: 4e96c97742f4 ("drm/i915: eDP link training optimization") Cc: <stable@vger.kernel.org> # v4.2+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393 Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com (cherry picked from commit 91df09d92ad82c8778ca218097bf827f154292ca)
2016-06-21drm/amd/powerplay: enable clock stretch feature for polarisRex Zhu
Power saving feature which reduces the amount of voltage needed for specific engine clocks. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amdgpu/gfx8: update golden setting for polaris10Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: enable avfs feature for polarisRex Zhu
avfs feature is for voltage control based on gpu system clock on polaris10 Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amdgpu/atombios: add avfs struct for Polaris10/11Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: add avfs related define for polarisRex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powrplay: enable stutter_mode for polaris.Rex Zhu
To minimize the dram power expenditure during static -screen Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: disable UVD SMU handshake for MCLK.Rex Zhu
sync up with internal programming recommendations. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: initialize variables which were missed.Rex Zhu
Missing pcie dpm settings. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: enable PowerContainment feature for polaris10/11.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-21drm/amd/powerplay: need to notify system bios pcie device readyRex Zhu
before request performance state. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm/amd/powerplay: fix bug that function parameter was incorect.Rex Zhu
Wrong value passed to acpi_pcie_perf_request. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm/amd/powerplay: fix logic error.Rex Zhu
the error lead powerplay can't get display info in DGPU case. store_cc6_data just implement in APU. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-21drm: atmel-hlcdc: Fix OF graph parsingBoris Brezillon
atmel_hlcdc_create_outputs() iterates over OF graph nodes and releases the node (using of_node_put()) after each iteration, which is wrong since for_each_endpoint_of_node() is already taking care of that. Move the of_node_put() call in the error path. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 17a8e03e7e97 ("drm: atmel-hlcdc: rework the output code to support drm bridges")
2016-06-21drm: atmel-hlcdc: actually disable scaling when no scaling is requiredBoris Brezillon
The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alex Vazquez <avazquez.dev@gmail.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org>
generated by cgit (git 2.34.1) at 2025-10-01 19:47:12 +0000