summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-26i3c: master: svc: Improve DAA STOP handle code logicFrank Li
The REQUEST_PROC_DAA command behaves differently from other commands. Sometimes the hardware can auto emit STOP, but in other conditions, it cannot. Improves the code logic to better handle these situations. Hardware can auto emit STOP only when the following conditions are met: - The previous I3C device correctly returns a PID and ACKs an I3C address. - A NACK is received when emitting 7E to try to get the next I3C device's PID. In all other cases, a manual STOP emission is needed. The code is changed to emit STOP when break the while loop and 'return 0' only when the hardware can auto emit STOP. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240702223107.403057-1-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: dw: Add optional apb clockAniket
Besides the core clock, IP also has an apb interface clock. Add an optional hook for the same. Signed-off-by: Aniket <aniketmaurya@google.com> Link: https://lore.kernel.org/r/20240628154618.327151-1-aniketmaurya@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: dw: Use new *_enabled clk APIAniket
Move to "enabled" variant of clk_get API. It takes care of enable and disable calls during the probe and remove. Signed-off-by: Aniket <aniketmaurya@google.com> Link: https://lore.kernel.org/r/20240628154603.326075-1-aniketmaurya@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: master: svc: Convert comma to semicolonChen Ni
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20240702024758.1411569-1-nichen@iscas.ac.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: mipi-i3c-hci: Round IBI data chunk size to HW supported valueJarkko Nikula
The dma.c: hci_dma_init() sets the CHUNK_SIZE field in the IBI_SETUP register incorrectly if the calculated ibi_chunk_sz is not exactly 2^(n+2) bytes, where n is 0..6. Fix this by rounding the chunk size up to nearest 2^(n+2) bytes. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20240628131559.502822-4-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setupJarkko Nikula
Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20240628131559.502822-3-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: mipi-i3c-hci: Set IBI Status and Data Ring base addressesJarkko Nikula
IBI Status and Data Ring base address registers are not set so HW obviously cannot update those rings after In-Band Interrupt. Set them to already allocated and mapped ring addresses. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20240628131559.502822-2-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: mipi-i3c-hci: Switch to lower_32_bits()/upper_32_bits() helpersJarkko Nikula
Rather than having own lo32()/hi32() helpers for dealing with 32-bit and 64-bit build targets switch to generic lower_32_bits()/upper_32_bits() helpers. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20240628131559.502822-1-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: dw: Remove ibi_capable propertyAniket
Since DW I3C IP master role always supports IBI, we don't need to keep two variants of master ops and select one using this property. Hence remove the code. Signed-off-by: Aniket <aniketmaurya@google.com> Link: https://lore.kernel.org/r/20240627034119.3938050-1-aniketmaurya@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: dw: Fix IBI intr programmingAniket
IBI_SIR_REQ_REJECT register is not present if the IP has IC_HAS_IBI_DATA = 1 set. So don't rely on doing read- modify-write op on this register. Instead maintain a variable to store the sir reject mask and use it to set IBI_SIR_REQ_REJECT. Signed-off-by: Aniket <aniketmaurya@google.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: dw: Fix clearing queue thldAniket
QUEUE_THLD_CTRL_IBI_STAT_MASK is repeated twice. Replace with QUEUE_THLD_CTRL_IBI_DATA_MASK. Signed-off-by: Aniket <aniketmaurya@google.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: mipi-i3c-hci: Fix number of DAT/DCT entries for HCI versions < 1.1Jarkko Nikula
I was wrong about the TABLE_SIZE field description in the commit 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes"). For the MIPI I3C HCI versions 1.0 and earlier the TABLE_SIZE field in the registers DAT_SECTION_OFFSET and DCT_SECTION_OFFSET is indeed defined in DWORDs and not number of entries like it is defined in later versions. Where above fix allowed driver initialization to continue the wrongly interpreted TABLE_SIZE field leads variables DAT_entries being twice and DCT_entries four times as big as they really are. That in turn leads clearing the DAT table over the boundary in the dat_v1.c: hci_dat_v1_init(). So interprete the TABLE_SIZE field in DWORDs for HCI versions < 1.1 and fix number of DAT/DCT entries accordingly. Fixes: 0676bfebf576 ("i3c: mipi-i3c-hci: Fix DAT/DCT entry sizes") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26i3c: master: svc: resend target address when get NACKFrank Li
According to I3C Spec 1.1.1, 11-Jun-2021, section: 5.1.2.2.3: If the Controller chooses to start an I3C Message with an I3C Dynamic Address, then special provisions shall be made because that same I3C Target may be initiating an IBI or a Controller Role Request. So, one of three things may happen: (skip 1, 2) 3. The Addresses match and the RnW bits also match, and so neither Controller nor Target will ACK since both are expecting the other side to provide ACK. As a result, each side might think it had "won" arbitration, but neither side would continue, as each would subsequently see that the other did not provide ACK. ... For either value of RnW: Due to the NACK, the Controller shall defer the Private Write or Private Read, and should typically transmit the Target ^^^^^^^^^^^^^^^^^^^ Address again after a Repeated START (i.e., the next one or any one prior ^^^^^^^^^^^^^ to a STOP in the Frame). Since the Address Header following a Repeated START is not arbitrated, the Controller will always win (see Section 5.1.2.2.4). Resend target address again if address is not 7E and controller get NACK. Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-07-26Merge tag 'amd-drm-fixes-6.11-2024-07-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-fixes-6.11-2024-07-25: amdgpu: - SDMA 5.2 workaround - GFX12 fixes - Uninitialized variable fix - VCN/JPEG 4.0.3 fixes - Misc display fixes - RAS fixes - VCN4/5 harvest fix - GPU reset fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240725202900.2155572-1-alexander.deucher@amd.com
2024-07-26Merge tag 'drm-intel-next-fixes-2024-07-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next - Do not consider preemption during execlists_dequeue for gen8 [gt] (Nitin Gote) - Allow NULL memory region (Jonathan Cavitt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZqICQzyzm/6hDWy4@linux
2024-07-25Merge tag 'net-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. A lot of networking people were at a conference last week, busy catching COVID, so relatively short PR. Current release - regressions: - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP Current release - new code bugs: - l2tp: protect session IDR and tunnel session list with one lock, make sure the state is coherent to avoid a warning - eth: bnxt_en: update xdp_rxq_info in queue restart logic - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field Previous releases - regressions: - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len, the field reuses previously un-validated pad Previous releases - always broken: - tap/tun: drop short frames to prevent crashes later in the stack - eth: ice: add a per-VF limit on number of FDIR filters - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash" * tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) tun: add missing verification for short frame tap: add missing verification for short frame mISDN: Fix a use after free in hfcmulti_tx() gve: Fix an edge case for TSO skb validity check bnxt_en: update xdp_rxq_info in queue restart logic tcp: process the 3rd ACK with sk_socket for TFO/MPTCP selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling MAINTAINERS: make Breno the netconsole maintainer MAINTAINERS: Update bonding entry net: nexthop: Initialize all fields in dumped nexthops net: stmmac: Correct byte order of perfect_match selftests: forwarding: skip if kernel not support setting bridge fdb learning limit tipc: Return non-zero value from tipc_udp_addr2str() on error netfilter: nft_set_pipapo_avx2: disable softinterrupts ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters net: bonding: correctly annotate RCU in bond_should_notify_peers() ...
2024-07-25Merge tag 'printk-for-6.11-trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - trivial printk changes The bigger "real" printk work is still being discussed. * tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: add missing MODULE_DESCRIPTION() macro printk: Rename console_replay_all() and update context
2024-07-25Merge tag 'constfy-sysctl-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl constification from Joel Granados: "Treewide constification of the ctl_table argument of proc_handlers using a coccinelle script and some manual code formatting fixups. This is a prerequisite to moving the static ctl_table structs into read-only data section which will ensure that proc_handler function pointers cannot be modified" * tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: treewide: constify the ctl_table argument of proc_handlers
2024-07-25Merge tag 'efi-fixes-for-v6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Wipe screen_info after allocating it from the heap - used by arm32 and EFI zboot, other EFI architectures allocate it statically - Revert to allocating boot_params from the heap on x86 when entering via the native PE entrypoint, to work around a regression on older Dell hardware * tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Revert to heap allocated boot_params for PE entrypoint efi/libstub: Zero initialize heap allocated struct screen_info
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-25Merge tag 'linux-watchdog-6.11-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - make watchdog_class const - rework of the rzg2l_wdt driver - other small fixes and improvements * tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space watchdog: rzn1: Convert comma to semicolon watchdog: lenovo_se10_wdt: Convert comma to semicolon dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support watchdog: rzg2l_wdt: Add suspend/resume support watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset watchdog: rzg2l_wdt: Remove comparison with zero watchdog: rzg2l_wdt: Remove reset de-assert from probe watchdog: rzg2l_wdt: Check return status of pm_runtime_put() watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get() watchdog: rzg2l_wdt: Make the driver depend on PM watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011 watchdog: imx7ulp_wdt: keep already running watchdog enabled watchdog: starfive: Add missing clk_disable_unprepare() watchdog: Make watchdog_class const
2024-07-25tun: add missing verification for short frameDongli Zhang
The cited commit missed to check against the validity of the frame length in the tun_xdp_one() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tun_xdp_one-->eth_type_trans() may access the Ethernet header although it can be less than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tun_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted for IFF_TAP. This is to drop any frame shorter than the Ethernet header size just like how tun_get_user() does. CVE: CVE-2024-41091 Inspired-by: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/ Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()") Cc: stable@vger.kernel.org Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240724170452.16837-3-dongli.zhang@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25tap: add missing verification for short frameSi-Wei Liu
The cited commit missed to check against the validity of the frame length in the tap_get_user_xdp() path, which could cause a corrupted skb to be sent downstack. Even before the skb is transmitted, the tap_get_user_xdp()-->skb_set_network_header() may assume the size is more than ETH_HLEN. Once transmitted, this could either cause out-of-bound access beyond the actual length, or confuse the underlayer with incorrect or inconsistent header length in the skb metadata. In the alternative path, tap_get_user() already prohibits short frame which has the length less than Ethernet header size from being transmitted. This is to drop any frame shorter than the Ethernet header size just like how tap_get_user() does. CVE: CVE-2024-41090 Link: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/ Fixes: 0efac27791ee ("tap: accept an array of XDP buffs through sendmsg()") Cc: stable@vger.kernel.org Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240724170452.16837-2-dongli.zhang@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25mISDN: Fix a use after free in hfcmulti_tx()Dan Carpenter
Don't dereference *sp after calling dev_kfree_skb(*sp). Fixes: af69fb3a8ffa ("Add mISDN HFC multiport driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/8be65f5a-c2dd-4ba0-8a10-bfe5980b8cfb@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25gve: Fix an edge case for TSO skb validity checkBailey Forrest
The NIC requires each TSO segment to not span more than 10 descriptors. NIC further requires each descriptor to not exceed 16KB - 1 (GVE_TX_MAX_BUF_SIZE_DQO). The descriptors for an skb are generated by gve_tx_add_skb_no_copy_dqo() for DQO RDA queue format. gve_tx_add_skb_no_copy_dqo() loops through each skb frag and generates a descriptor for the entire frag if the frag size is not greater than GVE_TX_MAX_BUF_SIZE_DQO. If the frag size is greater than GVE_TX_MAX_BUF_SIZE_DQO, it is split into descriptor(s) of size GVE_TX_MAX_BUF_SIZE_DQO and a descriptor is generated for the remainder (frag size % GVE_TX_MAX_BUF_SIZE_DQO). gve_can_send_tso() checks if the descriptors thus generated for an skb would meet the requirement that each TSO-segment not span more than 10 descriptors. However, the current code misses an edge case when a TSO segment spans multiple descriptors within a large frag. This change fixes the edge case. gve_can_send_tso() relies on the assumption that max gso size (9728) is less than GVE_TX_MAX_BUF_SIZE_DQO and therefore within an skb fragment a TSO segment can never span more than 2 descriptors. Fixes: a57e5de476be ("gve: DQO: Add TX path") Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Bailey Forrest <bcf@google.com> Reviewed-by: Jeroen de Borst <jeroendb@google.com> Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240724143431.3343722-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25bnxt_en: update xdp_rxq_info in queue restart logicTaehee Yoo
When the netdev_rx_queue_restart() restarts queues, the bnxt_en driver updates(creates and deletes) a page_pool. But it doesn't update xdp_rxq_info, so the xdp_rxq_info is still connected to an old page_pool. So, bnxt_rx_ring_info->page_pool indicates a new page_pool, but bnxt_rx_ring_info->xdp_rxq is still connected to an old page_pool. An old page_pool is no longer used so it is supposed to be deleted by page_pool_destroy() but it isn't. Because the xdp_rxq_info is holding the reference count for it and the xdp_rxq_info is not updated, an old page_pool will not be deleted in the queue restart logic. Before restarting 1 queue: ./tools/net/ynl/samples/page-pool enp10s0f1np1[6] page pools: 4 (zombies: 0) refs: 8192 bytes: 33554432 (refs: 0 bytes: 0) recycling: 0.0% (alloc: 128:8048 recycle: 0:0) After restarting 1 queue: ./tools/net/ynl/samples/page-pool enp10s0f1np1[6] page pools: 5 (zombies: 0) refs: 10240 bytes: 41943040 (refs: 0 bytes: 0) recycling: 20.0% (alloc: 160:10080 recycle: 1920:128) Before restarting queues, an interface has 4 page_pools. After restarting one queue, an interface has 5 page_pools, but it should be 4, not 5. The reason is that queue restarting logic creates a new page_pool and an old page_pool is not deleted due to the absence of an update of xdp_rxq_info logic. Fixes: 2d694c27d32e ("bnxt_en: implement netdev_queue_mgmt_ops") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: David Wei <dw@davidwei.uk> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20240721053554.1233549-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25nvme-pci: add missing condition check for existence of mapped dataLeon Romanovsky
nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference. Fixes: 4aedb705437f ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-07-25iommu: arm-smmu: Fix Tegra workaround for PAGE_SIZE mappingsAshish Mhetre
PAGE_SIZE can be 16KB for Tegra which is not supported by MMU-500 on both Tegra194 and Tegra234. Retain only valid granularities from pgsize_bitmap which would either be 4KB or 64KB. Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Link: https://lore.kernel.org/r/20240724173132.219978-1-amhetre@nvidia.com Signed-off-by: Will Deacon <will@kernel.org>
2024-07-25of: remove internal arguments from of_property_for_each_u32()Luca Ceresoli
The of_property_for_each_u32() macro needs five parameters, two of which are primarily meant as internal variables for the macro itself (in the for() clause). Yet these two parameters are used by a few drivers, and this can be considered misuse or at least bad practice. Now that the kernel uses C11 to build, these two parameters can be avoided by declaring them internally, thus changing this pattern: struct property *prop; const __be32 *p; u32 val; of_property_for_each_u32(np, "xyz", prop, p, val) { ... } to this: u32 val; of_property_for_each_u32(np, "xyz", val) { ... } However two variables cannot be declared in the for clause even with C11, so declare one struct that contain the two variables we actually need. As the variables inside this struct are not meant to be used by users of this macro, give the struct instance the noticeable name "_it" so it is visible during code reviews, helping to avoid new code to use it directly. Most usages are trivially converted as they do not use those two parameters, as expected. The non-trivial cases are: - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the checks had to be replicated in a different way, making code more verbose and somewhat uglier, but I refrained from a full rework to keep as much of the original code untouched having no hardware to test my changes All the changes have been build tested. The few for which I have the hardware have been runtime-tested too. Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-25rbd: don't assume rbd_is_lock_owner() for exclusive mappingsIlya Dryomov
Expanding on the previous commit, assuming that rbd_is_lock_owner() always returns true (i.e. that we are either in RBD_LOCK_STATE_LOCKED or RBD_LOCK_STATE_QUIESCING) if the mapping is exclusive is wrong too. In case ceph_cls_set_cookie() fails, the lock would be temporarily released even if the mapping is exclusive, meaning that we can end up even in RBD_LOCK_STATE_UNLOCKED. IOW, exclusive mappings are really "just" about disabling automatic lock transitions (as documented in the man page), not about grabbing the lock and holding on to it whatever it takes. Cc: stable@vger.kernel.org Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2024-07-25rbd: don't assume RBD_LOCK_STATE_LOCKED for exclusive mappingsIlya Dryomov
Every time a watch is reestablished after getting lost, we need to update the cookie which involves quiescing exclusive lock. For this, we transition from RBD_LOCK_STATE_LOCKED to RBD_LOCK_STATE_QUIESCING roughly for the duration of rbd_reacquire_lock() call. If the mapping is exclusive and I/O happens to arrive in this time window, it's failed with EROFS (later translated to EIO) based on the wrong assumption in rbd_img_exclusive_lock() -- "lock got released?" check there stopped making sense with commit a2b1da09793d ("rbd: lock should be quiesced on reacquire"). To make it worse, any such I/O is added to the acquiring list before EROFS is returned and this sets up for violating rbd_lock_del_request() precondition that the request is either on the running list or not on any list at all -- see commit ded080c86b3f ("rbd: don't move requests to the running list on errors"). rbd_lock_del_request() ends up processing these requests as if they were on the running list which screws up quiescing_wait completion counter and ultimately leads to rbd_assert(!completion_done(&rbd_dev->quiescing_wait)); being triggered on the next watch error. Cc: stable@vger.kernel.org # 06ef84c4e9c4: rbd: rename RBD_LOCK_STATE_RELEASING and releasing_wait Cc: stable@vger.kernel.org Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2024-07-25rbd: rename RBD_LOCK_STATE_RELEASING and releasing_waitIlya Dryomov
... to RBD_LOCK_STATE_QUIESCING and quiescing_wait to recognize that this state and the associated completion are backing rbd_quiesce_lock(), which isn't specific to releasing the lock. While exclusive lock does get quiesced before it's released, it also gets quiesced before an attempt to update the cookie is made and there the lock is not released as long as ceph_cls_set_cookie() succeeds. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2024-07-25net: mediatek: Fix potential NULL pointer dereference in dummy net_device ↵Breno Leitao
handling Move the freeing of the dummy net_device from mtk_free_dev() to mtk_remove(). Previously, if alloc_netdev_dummy() failed in mtk_probe(), eth->dummy_dev would be NULL. The error path would then call mtk_free_dev(), which in turn called free_netdev() assuming dummy_dev was allocated (but it was not), potentially causing a NULL pointer dereference. By moving free_netdev() to mtk_remove(), we ensure it's only called when mtk_probe() has succeeded and dummy_dev is fully allocated. This addresses a potential NULL pointer dereference detected by Smatch[1]. Fixes: b209bd6d0bff ("net: mediatek: mtk_eth_sock: allocate dummy net_device dynamically") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/4160f4e0-cbef-4a22-8b5d-42c4d399e1f7@stanley.mountain/ [1] Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240724080524.2734499-1-leitao@debian.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-25Merge branch '100GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== This series contains updates to ice driver only. Ahmed enforces the iavf per VF filter limit on ice (PF) driver to prevent possible resource exhaustion. Wojciech corrects assignment of l2 flags read from firmware. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters ==================== Link: https://patch.msgid.link/20240723233242.3146628-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-24drm/amdgpu: reset vm state machine after gpu reset(vram lost)ZhenGuo Yin
[Why] Page table of compute VM in the VRAM will lost after gpu reset. VRAM won't be restored since compute VM has no shadows. [How] Use higher 32-bit of vm->generation to record a vram_lost_counter. Reset the VM state machine when vm->genertaion is not equal to the new generation token. v2: Check vm->generation instead of calling drm_sched_entity_error in amdgpu_vm_validate. v3: Use new generation token instead of vram_lost_counter for check. Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 47c0388b0589cb481c294dcb857d25a214c46eb3)
2024-07-24drm/amdgpu: add missed harvest check for VCN IP v4/v5Tim Huang
To prevent below probe failure, add a check for models with VCN IP v4.0.6 where VCN1 may be harvested. v2: Apply the same check to VCN IP v4.0 and v5.0. [ 54.070117] RIP: 0010:vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu] [ 54.071055] Code: 80 fb ff 8d 82 00 80 fe ff 81 fe 00 06 00 00 0f 43 c2 49 69 d5 38 0d 00 00 48 8d 71 04 c1 e8 02 4c 01 f2 48 89 b2 50 f6 02 00 <89> 01 48 8b 82 50 f6 02 00 48 8d 48 04 48 89 8a 50 f6 02 00 c7 00 [ 54.072408] RSP: 0018:ffffb17985f736f8 EFLAGS: 00010286 [ 54.072793] RAX: 00000000000000d6 RBX: ffff99a82f680000 RCX: 0000000000000000 [ 54.073315] RDX: ffff99a82f680000 RSI: 0000000000000004 RDI: ffff99a82f680000 [ 54.073835] RBP: ffffb17985f73730 R08: 0000000000000001 R09: 0000000000000000 [ 54.074353] R10: 0000000000000008 R11: ffffb17983c05000 R12: 0000000000000000 [ 54.074879] R13: 0000000000000000 R14: ffff99a82f680000 R15: 0000000000000001 [ 54.075400] FS: 00007f8d9c79a000(0000) GS:ffff99ab2f140000(0000) knlGS:0000000000000000 [ 54.075988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.076408] CR2: 0000000000000000 CR3: 0000000140c3a000 CR4: 0000000000750ef0 [ 54.076927] PKRU: 55555554 [ 54.077132] Call Trace: [ 54.077319] <TASK> [ 54.077484] ? show_regs+0x69/0x80 [ 54.077747] ? __die+0x28/0x70 [ 54.077979] ? page_fault_oops+0x180/0x4b0 [ 54.078286] ? do_user_addr_fault+0x2d2/0x680 [ 54.078610] ? exc_page_fault+0x84/0x190 [ 54.078910] ? asm_exc_page_fault+0x2b/0x30 [ 54.079224] ? vcn_v4_0_5_start_dpg_mode+0x9be/0x36b0 [amdgpu] [ 54.079941] ? vcn_v4_0_5_start_dpg_mode+0xe6/0x36b0 [amdgpu] [ 54.080617] vcn_v4_0_5_set_powergating_state+0x82/0x19b0 [amdgpu] [ 54.081316] amdgpu_device_ip_set_powergating_state+0x64/0xc0 [amdgpu] [ 54.082057] amdgpu_vcn_ring_begin_use+0x6f/0x1d0 [amdgpu] [ 54.082727] amdgpu_ring_alloc+0x44/0x70 [amdgpu] [ 54.083351] amdgpu_vcn_dec_sw_ring_test_ring+0x40/0x110 [amdgpu] [ 54.084054] amdgpu_ring_test_helper+0x22/0x90 [amdgpu] [ 54.084698] vcn_v4_0_5_hw_init+0x87/0xc0 [amdgpu] [ 54.085307] amdgpu_device_init+0x1f96/0x2780 [amdgpu] [ 54.085951] amdgpu_driver_load_kms+0x1e/0xc0 [amdgpu] [ 54.086591] amdgpu_pci_probe+0x19f/0x550 [amdgpu] [ 54.087215] local_pci_probe+0x48/0xa0 [ 54.087509] pci_device_probe+0xc9/0x250 [ 54.087812] really_probe+0x1a4/0x3f0 [ 54.088101] __driver_probe_device+0x7d/0x170 [ 54.088443] driver_probe_device+0x24/0xa0 [ 54.088765] __driver_attach+0xdd/0x1d0 [ 54.089068] ? __pfx___driver_attach+0x10/0x10 [ 54.089417] bus_for_each_dev+0x8e/0xe0 [ 54.089718] driver_attach+0x22/0x30 [ 54.090000] bus_add_driver+0x120/0x220 [ 54.090303] driver_register+0x62/0x120 [ 54.090606] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 54.091255] __pci_register_driver+0x62/0x70 [ 54.091593] amdgpu_init+0x67/0xff0 [amdgpu] [ 54.092190] do_one_initcall+0x5f/0x330 [ 54.092495] do_init_module+0x68/0x240 [ 54.092794] load_module+0x201c/0x2110 [ 54.093093] init_module_from_file+0x97/0xd0 [ 54.093428] ? init_module_from_file+0x97/0xd0 [ 54.093777] idempotent_init_module+0x11c/0x2a0 [ 54.094134] __x64_sys_finit_module+0x64/0xc0 [ 54.094476] do_syscall_64+0x58/0x120 [ 54.094767] entry_SYSCALL_64_after_hwframe+0x6e/0x76 Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 0b071245ddd98539d4f7493bdd188417fcf2d629)
2024-07-24drm/amdgpu: Fix eeprom max record countStanley.Yang
The eeprom table is empty before initializing, set eeprom table version first before initializing. Changed from V1: Reuse amdgpu_ras_set_eeprom_table_version function Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 015b8a2fdf39a4c288ff24e7b715b8d9198e56dc)
2024-07-24drm/amdgpu: fix ras UE error injection failure issueYiPeng Chai
The ras command shared memory is allocated from VRAM and the response status of the command buffer will not be zero due to gpu being in fatal error state after ras UE error injection. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8284951a6e79c6806c675e5f68a4cd425dd56bc4)
2024-07-24drm/amd/display: Remove ASSERT if significance is zero in math_ceil2Rodrigo Siqueira
In the DML math_ceil2 function, there is one ASSERT if the significance is equal to zero. However, significance might be equal to zero sometimes, and this is not an issue for a ceil function, but the current ASSERT will trigger warnings in those cases. This commit removes the ASSERT if the significance is equal to zero to avoid unnecessary noise. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 332315885d3ccc6d8fe99700f3c2e4c24aa65ab7)
2024-07-24drm/amd/display: Check for NULL pointerSung Joon Kim
[why & how] Need to make sure plane_state is initialized before accessing its members. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 295d91cbc700651782a60572f83c24861607b648)
2024-07-24drm/amdgpu/vcn: Use offsets local to VCN/JPEG in VFJane Jian
For VCN/JPEG 4.0.3, use only the local addressing scheme. - Mask bit higher than AID0 range v2 remain the case for mmhub use master XCC Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit caaf576292f8ccef5cdc0ac16e77b87dbf6e17ab)
2024-07-24drm/amdgpu: Add empty HDP flush function to VCN v4.0.3Lijo Lazar
VCN 4.0.3 does not HDP flush with RRMT enabled. Instead, mmsch will do the HDP flush. This change is necessary for VCN v4.0.3, no need for backward compatibility Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 49cfaebe48e97500a68d5322a8194736b0a2c3cf)
2024-07-24drm/amdgpu: Add empty HDP flush function to JPEG v4.0.3Lijo Lazar
JPEG v4.0.3 doesn't support HDP flush when RRMT is enabled. Instead, mmsch fw will do the flush. This change is necessary for JPEG v4.0.3, no need for backward compatibility Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 585e3fdb36f59c5cfed0ae06c852dc1df22b1d60)
2024-07-24drm/amd/amdgpu: Fix uninitialized variable warningsMa Ke
Return 0 to avoid returning an uninitialized variable r. Cc: stable@vger.kernel.org Fixes: 230dd6bb6117 ("drm/amd/amdgpu: implement mode2 reset on smu_v13_0_10") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6472de66c0aa18d50a4b5ca85f8272e88a737676)
2024-07-24drm/amdgpu: Fix atomics on GFX12David Belanger
If PCIe supports atomics, configure register to prevent DF from breaking atomics in separate load/store operations. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 666f14cab21b17ccc1bdfe1e82458aa429b3b7e0)
2024-07-24drm/amdgpu/sdma5.2: Update wptr registers as well as doorbellAlex Deucher
We seem to have a case where SDMA will sometimes miss a doorbell if GFX is entering the powergating state when the doorbell comes in. To workaround this, we can update the wptr via MMIO, however, this is only safe because we disallow gfxoff in begin_ring() for SDMA 5.2 and then allow it again in end_ring(). Enable this workaround while we are root causing the issue with the HW team. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/3440 Tested-by: Friedrich Vock <friedrich.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit f2ac52634963fc38e4935e11077b6f7854e5d700)
2024-07-24Merge tag 'phy-for-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support - Samsung Exynos gs101 drd combo phy - Qualcomm SC8180x USB uniphy, IPQ9574 QMP PCIe phy - Airoha EN7581 PCIe phy - Freescale i.MX8Q HSIO SerDes phy - Starfive jh7110 dphy tx Updates: - Resume support for j721e-wiz driver - Updates to Exynos usbdrd driver - Support for optional power domains in g12a usb2-phy driver - Debugfs support and updates to zynqmp driver" * tag 'phy-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (56 commits) phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers dt-bindings: phy: rockchip-emmc-phy: Convert to dtschema dt-bindings: phy: qcom,qmp-usb: fix spelling error phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS) phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk phy: exynos5-usbdrd: convert (phy) register access clock to clk_bulk phy: exynos5-usbdrd: convert core clocks to clk_bulk phy: exynos5-usbdrd: support isolating HS and SS ports independently dt-bindings: phy: samsung,usb3-drd-phy: add gs101 compatible phy: core: Fix documentation of of_phy_get phy: starfive: Correct the dphy configure process phy: zynqmp: Add debugfs support phy: zynqmp: Take the phy mutex in xlate phy: zynqmp: Only wait for PLL lock "primary" instances phy: zynqmp: Store instance instead of type phy: zynqmp: Enable reference clock correctly phy: cadence-torrent: Check return value on register read phy: Fix the cacography in phy-exynos5250-usb2.c phy: phy-rockchip-samsung-hdptx: Select CONFIG_MFD_SYSCON ...
2024-07-24Merge tag 'soundwire-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Simplification across subsystem using cleanup.h - Support for debugfs to read/write commands - Few Intel and Qualcomm driver updates * tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: debugfs: simplify with cleanup.h soundwire: cadence: simplify with cleanup.h soundwire: intel_ace2x: simplify with cleanup.h soundwire: intel_ace2x: simplify return path in hw_params soundwire: intel: simplify with cleanup.h soundwire: intel: simplify return path in hw_params soundwire: amd_init: simplify with cleanup.h soundwire: amd: simplify with cleanup.h soundwire: amd: simplify return path in hw_params soundwire: intel_auxdevice: start the bus at default frequency soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list drivers:soundwire: qcom: cleanup port maask calculations soundwire: bus: simplify by using local slave->prop soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer soundwire: Intel: clarify Copyright information soundwire: intel_ace2.x: add AC timing extensions for PantherLake soundwire: bus: add stream refcount soundwire: debugfs: add interface to read/write commands
2024-07-24Merge tag 'dmaengine-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - New dmaengine_prep_peripheral_dma_vec() to support transfers using dma vectors and documentation and user in AXI dma - STMicro STM32 DMA3 support and new capabilities of cyclic dma Updates: - Yaml conversion for Freescale imx dma and qdma bindings, sprd sc9860 dma binding - Altera msgdma updates for descriptor management" * tag 'dmaengine-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits) dt-bindings: fsl-qdma: fix interrupts 'if' check logic dt-bindings: dma: sprd,sc9860-dma: convert to YAML dmaengine: fsl-dpaa2-qdma: add missing MODULE_DESCRIPTION() macro dmaengine: ti: add missing MODULE_DESCRIPTION() macros dmaengine: ti: cppi41: add missing MODULE_DESCRIPTION() macro dmaengine: virt-dma: add missing MODULE_DESCRIPTION() macro dmaengine: ti: k3-udma: Fix BCHAN count with UHC and HC channels dmaengine: sh: rz-dmac: Fix lockdep assert warning dmaengine: qcom: gpi: clean up the IRQ disable/enable in gpi_reset_chan() dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM dmaengine: qcom: gpi: remove unused struct 'reg_info' dmaengine: moxart-dma: remove unused struct 'moxart_filter_data' dt-bindings: fsl-qdma: Convert to yaml format dmaengine: fsl-edma: remove redundant "idle" field from fsl_chan dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated dmaengine: stm32-dma3: defer channel registration to specify channel name dmaengine: add channel device name to channel registration dmaengine: stm32-dma3: improve residue granularity dmaengine: stm32-dma3: add device_pause and device_resume ops dmaengine: stm32-dma3: add DMA_MEMCPY capability ...
2024-07-24sysctl: treewide: constify the ctl_table argument of proc_handlersJoel Granados
const qualify the struct ctl_table argument in the proc_handler function signatures. This is a prerequisite to moving the static ctl_table structs into .rodata data which will ensure that proc_handler function pointers cannot be modified. This patch has been generated by the following coccinelle script: ``` virtual patch @r1@ identifier ctl, write, buffer, lenp, ppos; identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)"; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos); @r2@ identifier func, ctl, write, buffer, lenp, ppos; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int write, void *buffer, size_t *lenp, loff_t *ppos) { ... } @r3@ identifier func; @@ int func( - struct ctl_table * + const struct ctl_table * ,int , void *, size_t *, loff_t *); @r4@ identifier func, ctl; @@ int func( - struct ctl_table *ctl + const struct ctl_table *ctl ,int , void *, size_t *, loff_t *); @r5@ identifier func, write, buffer, lenp, ppos; @@ int func( - struct ctl_table * + const struct ctl_table * ,int write, void *buffer, size_t *lenp, loff_t *ppos); ``` * Code formatting was adjusted in xfs_sysctl.c to comply with code conventions. The xfs_stats_clear_proc_handler, xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where adjusted. * The ctl_table argument in proc_watchdog_common was const qualified. This is called from a proc_handler itself and is calling back into another proc_handler, making it necessary to change it as part of the proc_handler migration. Co-developed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Co-developed-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Joel Granados <j.granados@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-16 04:32:14 +0000