summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-03-07bnx2x: fix incorrect filter count in an error messageMichal Schmidt
filters->count is the number of filters we were supposed to configure. There is no reason to increase it by +1 when printing the count in an error message. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07bnx2x: do not rollback VF MAC/VLAN filters we did not configureMichal Schmidt
On failure to configure a VF MAC/VLAN filter we should not attempt to rollback filters that we failed to configure with -EEXIST. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07bnx2x: fix detection of VLAN filtering feature for VFMichal Schmidt
VFs are currently missing the VLAN filtering feature, because we were checking the PF's acquire response before actually performing the acquire. Fix it by setting the feature flag later when we have the PF response. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07bnx2x: fix possible overrun of VFPF multicast addresses arrayMichal Schmidt
It is too late to check for the limit of the number of VF multicast addresses after they have already been copied to the req->multicast[] array, possibly overflowing it. Do the check before copying. Also fix the error path to not skip unlocking vf2pf_mutex. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07bnx2x: lower verbosity of VF stats debug messagesMichal Schmidt
When BNX2X_MSG_IOV is enabled, the driver produces too many VF statistics messages. Lower the verbosity of the VF stats messages similarly as in commit 76ca70fabbdaa3 ("bnx2x: [Debug] change verbosity of some prints"). Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07bnx2x: prevent crash when accessing PTP with interface downMichal Schmidt
It is possible to crash the kernel by accessing a PTP device while its associated bnx2x interface is down. Before the interface is brought up, the timecounter is not initialized, so accessing it results in NULL dereference. Fix it by checking if the interface is up. Use -ENETDOWN as the error code when the interface is down. -EFAULT in bnx2x_ptp_adjfreq() did not seem right. Tested using phc_ctl get/set/adj/freq commands. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07spi_ks8995: regs_size incorrect for some devicesBlomme, Maarten
Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07spi_ks8995: fix "BUG: key accdaa28 not in .data!"Blomme, Maarten
Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07net/mlx5e: add IPV6 dependencyArnd Bergmann
The ethernet support now calls directly into the ipv6 core code, which fails if IPV6 is a loadable module but mlx5 is built-in: drivers/net/ethernet/mellanox/mlx5/core/en_tc.o: In function `mlx5e_create_encap_header_ipv6': en_tc.c:(.text.mlx5e_create_encap_header_ipv6+0x110): undefined reference to `ip6_route_output_flags' This adds a dependency to ensure that MLX5_CORE_EN can only be built if we are able link the kernel successfully. The downside is that the ethernet option can be hidden. Alternatively we could make MLX5_CORE depend on "IPV6 || !IPV6", which would force MLX5_CORE to be a module when IPV6 is, including in configurations where we don't use the ethernet support at all. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07PCI/ASPM: Always set link->downstream to avoid NULL dereference on removeYinghai Lu
We call pcie_aspm_exit_link_state() when we remove a device. If the device is the last PCIe function to be removed below a bridge and the bridge has an ASPM link_state struct, we disable ASPM on the link. Disabling ASPM requires link->downstream (used in pcie_config_aspm_link()). We previously set link->downstream in pcie_aspm_cap_init(), but only if the device was not blacklisted. Removing the blacklisted device caused a NULL pointer dereference in the pcie_aspm_exit_link_state() -> pcie_config_aspm_link() path: # echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: pcie_config_aspm_link+0x5d/0x2b0 Call Trace: pcie_aspm_exit_link_state+0x75/0x130 pci_stop_bus_device+0xa4/0xb0 pci_stop_and_remove_bus_device_locked+0x1a/0x30 remove_store+0x50/0x70 dev_attr_store+0x18/0x30 sysfs_kf_write+0x44/0x60 kernfs_fop_write+0x10e/0x190 __vfs_write+0x28/0x110 ? rcu_read_lock_sched_held+0x5d/0x80 ? rcu_sync_lockdep_assert+0x2c/0x60 ? __sb_start_write+0x173/0x1a0 ? vfs_write+0xb3/0x180 vfs_write+0xc4/0x180 SyS_write+0x49/0xa0 do_syscall_64+0xa6/0x1c0 entry_SYSCALL64_slow_path+0x25/0x25 ---[ end trace bd187ee0267df5d9 ]--- To avoid this, set link->downstream in alloc_pcie_link_state(), so every pcie_link_state structure has a valid link->downstream pointer. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rajat Jain <rajatja@google.com> CC: stable@vger.kernel.org
2017-03-07PCI: Prevent VPD access for QLogic ISP2722Ethan Zhao
QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD access issue too, while read the common pci-sysfs access interface shown as /sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd with simple 'cat' could cause system hang and panic: Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources: 1. Integrated Management Log (IML) 2. OA Syslog 3. OA Forward Progress Log 4. iLO Event Log CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015 0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072 0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51 Call Trace: <NMI> [<ffffffff817193de>] dump_stack+0x63/0x81 [<ffffffff81714072>] panic+0xd0/0x20e [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt] [<ffffffff81021fc9>] ? sched_clock+0x9/0x10 [<ffffffff8101c101>] nmi_handle+0x91/0x170 [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170 [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0 [<ffffffff8101c719>] default_do_nmi+0x99/0x140 [<ffffffff8101c8b4>] do_nmi+0xf4/0x170 [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120 <<EOE>> [<ffffffff815db4b3>] raw_pci_read+0x23/0x40 [<ffffffff815db4fc>] pci_read+0x2c/0x30 [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110 [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130 [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0 [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30 [<ffffffff8137d590>] read_vpd_attr+0x30/0x40 [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70 [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180 [<ffffffff8120dd97>] __vfs_read+0x37/0x100 [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0 [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0 [<ffffffff8120e476>] vfs_read+0x86/0x140 [<ffffffff8120f3f5>] SyS_read+0x55/0xd0 [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71 Shutting down cpus with NMI Kernel Offset: disabled drm_kms_helper: panic occurred, switching back to text console So blacklist the access to its VPD. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.6+
2017-03-07serial: samsung: Continue to work if DMA request failsKrzysztof Kozlowski
If DMA is not available (even when configured in DeviceTree), the driver will fail the startup procedure thus making serial console not available. For example this causes boot failure on QEMU ARMv7 (Exynos4210, SMDKC210): [    1.302575] OF: amba_device_add() failed (-19) for /amba/pdma@12680000 ... [   11.435732] samsung-uart 13800000.serial: DMA request failed [   72.963893] samsung-uart 13800000.serial: DMA request failed [   73.143361] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 DMA is not necessary for serial to work, so continue with UART startup after emitting a warning. Fixes: 62c37eedb74c ("serial: samsung: add dma reqest/release functions") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07PCI: exynos: Initialize elbi_base even when using PHY frameworkJaehoon Chung
Even when using the PHY framework, we need the elbi_base. Before this patch, we didn't initialize elbi_base, which caused NULL pointer dereferences later. Fixes: e7cd7ef58e1f ("PCI: exynos: Support the PHY generic framework") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-07dm bufio: add sector start offset to dm-bufio interfaceMikulas Patocka
Introduce dm_bufio_set_sector_offset() interface to allow setting a sector offset for a dm-bufio client. This is a prereq for the DM integrity target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-07dm table: add flag to allow target to handle its own integrity metadataMilan Broz
Add DM_TARGET_INTEGRITY flag that specifies bio integrity metadata is not inherited but implemented in the target itself. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-07dm cache: significant rework to leverage dm-bio-prison-v2Joe Thornber
The cache policy interfaces have been updated to work well with the new bio-prison v2 interface's ability to queue work immediately (promotion, demotion, etc) -- overriding benefit being reduced latency on processing IO through the cache. Previously such work would be left for the DM cache core to queue on various lists and then process in batches later -- this caused a serious delay in latency for IO driven by the cache. The background tracker code was factored out so that all cache policies can make use of it. Also, the "cleaner" policy has been removed and is now a variant of the smq policy that simply disallows migrations. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-07Merge branch 'stable/for-linus-4.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two tiny implementations of the DMA API for callback in ARM (for Xen)" * 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: implement xen_swiotlb_get_sgtable callback swiotlb-xen: implement xen_swiotlb_dma_mmap callback
2017-03-07tty: n_hdlc: get rid of racy n_hdlc.tbufAlexander Popov
Currently N_HDLC line discipline uses a self-made singly linked list for data buffers and has n_hdlc.tbuf pointer for buffer retransmitting after an error. The commit be10eb7589337e5defbe214dae038a53dd21add8 ("tty: n_hdlc add buffer flushing") introduced racy access to n_hdlc.tbuf. After tx error concurrent flush_tx_queue() and n_hdlc_send_frames() can put one data buffer to tx_free_buf_list twice. That causes double free in n_hdlc_release(). Let's use standard kernel linked list and get rid of n_hdlc.tbuf: in case of tx error put current data buffer after the head of tx_buf_list. Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-07Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000Kai-Heng Feng
The aux port does not get detected without noloop quirk, so external PS/2 mouse cannot work as result. The PS/2 mouse can work with this quirk. BugLink: https://bugs.launchpad.net/bugs/1591053 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-07[media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structureKieran Bingham
The interface to configure the LIF in the VSP1 requires adapting the function prototype for any changes. This makes extending the interface difficult. Change the function prototype to pass a structure which can be easily extended. This changes the means of disabling the pipeline, by now passing a NULL configuration rather than passing either a 0 width or height. [Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const] Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-07dm bio prison v2: new interface for the bio prisonJoe Thornber
The deferred set is gone and all methods have _v2 appended to the end of their names to allow for continued use of the original bio prison in DM thin-provisioning. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-07irqchip/crossbar: Fix incorrect type of register sizeFranck Demathieu
The 'size' variable is unsigned according to the dt-bindings. As this variable is used as integer in other places, create a new variable that allows to fix the following sparse issue (-Wtypesign): drivers/irqchip/irq-crossbar.c:279:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:279:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:279:52: got int *<noident> Signed-off-by: Franck Demathieu <fdemathieu@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07irqchip/gicv3-its: Add workaround for QDF2400 ITS erratum 0065Shanker Donthineni
On Qualcomm Datacenter Technologies QDF2400 SoCs, the ITS hardware implementation uses 16Bytes for Interrupt Translation Entry (ITE), but reports an incorrect value of 8Bytes in GITS_TYPER.ITTE_size. It might cause kernel memory corruption depending on the number of MSI(x) that are configured and the amount of memory that has been allocated for ITEs in its_create_device(). This patch fixes the potential memory corruption by setting the correct ITE size to 16Bytes. Cc: stable@vger.kernel.org Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-07clk: rockchip: Make uartpll a child of the gpll on rk3036Heiko Stuebner
The shared uart-pll is on boot a child of the apll that can get changed by cpu frequency scaling. So move it away to the more stable gpll to make sure the uart doesn't break on cpu frequency changes. This turned up during the 4.11 merge-window when commit 6a171b299379 ("serial: 8250_dw: Allow hardware flow control to be used") added general termios enablement making the uart on rk3036 change frequency and thus making it susceptible for the frequency scaling issue. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-07clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036Heiko Stuebner
The mux_pll_src_apll_dpll_gpll_usb480m_p parent list was missing a "," between the 3rd and 4th parent names, making them fall together and thus lookups fail. Fix that. Fixes: 5190c08b2989 ("clk: rockchip: add clock controller for rk3036") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-07rbd: supported_features bus attributeIlya Dryomov
... so that userspace can generate meaningful error messages and spell out unsupported features that need to be disabled. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-03-07clk: core: Copy connection idLeonard Crestez
Some drivers use sprintf to build clk connection id names but the clk core will save those strings and occasionally print them back. Duplicate the con_id strings instead of fixing all the users. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-07drivers/char/nwbutton: Fix build breakage caused by include file reshufflingGuenter Roeck
Fix: drivers/char/nwbutton.c: In function 'button_sequence_finished': drivers/char/nwbutton.c:134:3: error: implicit declaration of function 'kill_cad_pid' The declaration has been moved from one include file to another. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c3edc4010e9d102 ("sched/headers: Move task_struct::signal and ...") Link: http://lkml.kernel.org/r/1488762811-9022-1-git-send-email-linux@roeck-us.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-06scsi: lpfc: revise version number to 11.2.0.10James Smart
Revise lpfc version number to 11.2.0.10 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: code cleanups in NVME initiator discoveryJames Smart
This patch addresses the smatch issues identified by Dan Carpenter in http://www.spinics.net/lists/linux-scsi/msg105665.html The issues are: drivers/scsi/lpfc/lpfc_ct.c:943 lpfc_cmpl_ct_cmd_gft_id() error: we previously assumed 'ndlp' could be null (see line 928) Action: moved under if check drivers/scsi/lpfc/lpfc_nvmet.c:1694 lpfc_nvmet_unsol_issue_abort() error: we previously assumed 'ndlp' could be null (see line 1690) Action: conditionalized arg in printf stmt drivers/scsi/lpfc/lpfc_nvmet.c:1792 lpfc_nvmet_sol_fcp_issue_abort() error: we previously assumed 'ndlp' could be null (see line 1788) Action: conditionalized arg in printf stmt Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: code cleanups in NVME initiator baseJames Smart
This patch addresses the smatch issues identified by Dan Carpenter in http://www.spinics.net/lists/linux-scsi/msg105663.html The issues are: drivers/scsi/lpfc/lpfc_hbadisc.c:316 lpfc_dev_loss_tmo_handler() warn: we tested 'vport->load_flag & 2' before and it was 'false' Action: removed item from test drivers/scsi/lpfc/lpfc_hbadisc.c:701 lpfc_work_done() warn: test_bit() takes a bit number Action: changed definition so bit number drivers/scsi/lpfc/lpfc_hbadisc.c:2206 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec() error: uninitialized symbol 'vlan_id'. drivers/scsi/lpfc/lpfc_hbadisc.c:2582 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec() error: uninitialized symbol 'vlan_id'. drivers/scsi/lpfc/lpfc_hbadisc.c:2683 lpfc_mbx_cmpl_read_fcf_rec() error: uninitialized symbol 'vlan_id'. Action: initilized value drivers/scsi/lpfc/lpfc_hbadisc.c:4025 lpfc_register_remote_port() error: we previously assumed 'rdata' could be null (see line 4023) Action: refactored check block drivers/scsi/lpfc/lpfc_hbadisc.c:4613 lpfc_sli4_dequeue_nport_iocbs() error: double unlock 'irq:' Action: removed inner irq reference Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: correct rdp diag portnamesJames Smart
NVME merge reverted diag port names to the physical port. They should be the vport. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: remove dead sli3 nvme codeJames Smart
Remove nvme teardown calls that should not be there on sli3 devices Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: correct double printJames Smart
Correct a merge error that had debug data printed twice for the same element Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNTJames Smart
Without apriori understanding of what the define is, the name gives a very different impression of what it is (a max delay value for an EQ). Rename the define so it reflects what it is: the number of EQ IDs that can be set in one instance of the MODIFY_EQ_DELAY mbx command. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Rework lpfc Kconfig for NVME optionsJames Smart
Reworked Kconfig so that lfpc only requires the scsi stack. NVME Initiator and NVME Target support can be enabled if the other NVMe subsystems have been enabled. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: add transport eh_timed_out referenceJames Smart
Christoph's prior patch missed the template for the sli3 adapters, which is now the "no host reset" template. Add the transport eh_timed_out handler to the no host reset template Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix eh_deadline setting for sli3 adapters.James Smart
A previous change unilaterally removed the hba reset entry point from the sli3 host template. This was done to allow tape devices being used for back up from being removed. Why was this done ? When there was non-responding device on the fabric, the error escalation policy would escalate to the reset handler. When the reset handler was called, it would reset the adapter, dropping link, thus logging out and terminating all i/o's - on any target. If there was a tape device on the same adapter that wasn't in error, it would kill the tape i/o's, effectively killing the tape device state. With the reset point removed, the adapter reset avoided the fabric logout, allowing the other devices to continue to operate unaffected. A hack - yes. Hint: we really need a transport I_T nexus reset callback added to the eh process (in between the SCSI target reset and hba reset points), so a fc logout could occur to the one bad target only and stop the error escalation process. This patch commonizes the approach so it can be used for sli3 and sli4 adapters, but mandates the admin, via module parameter, specifically identify which adapters the resets are to be removed for. Additionally, bus_reset, which sends Target Reset TMFs to all targets, is also removed from the template as it too has the same effect as the adapter reset. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: add NVME exchange abortsJames Smart
previous code did little more than log a message. This patch adds abort path support, modeled after the SCSI code paths. Currently addresses only the initiator path. Target path under development, but stubbed out. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localportJames Smart
nvme bufs get allocated even when the registration fails. Move allocation into the rsgistration success path. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix IO submission if WQ is fullJames Smart
For both initiator and target: if WQ is full, return -EBUSY. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problemJames Smart
Word 1 in NVME CMD IU appears byte swapped from value placed in WQE Should be Big Endian value in WQE word 16 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix RCTL value on NVME LS request and responseJames Smart
NVME LS requests and responses had wrong R_CTL values. Use the FC4 ELS Request and Response defines (defines badly named, they are FC4 LS's) instead of the base ELS values. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adaptersJames Smart
if REG_VPI fails, the driver was incorrectly issuing INIT_VFI (a SLI4 command) on a SLI3 adapter. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: fix missing spin_unlock on sql_list_lockJames Smart
From: Colin Ian King <colin.king@canonical.com> In the case where sglq is null, the current code just returns without unlocking the spinlock sql_list_lock. Fix this by breaking out of the while loop and the exit path will then unlock and return NULL as was the original intention. Detected by CoverityScan, CID#1411635 ("Missing unlock") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: don't dereference dma_buf->iocbq before null checkJames Smart
From: Colin Ian King <colin.king@canonical.com> dma_buf->iocbq is being dereferenced immediately before it is being null checked, so we have a potential null pointer dereference bug. Fix this by only dereferencing it only once we have passed a null check on the pointer. Detected by CoverityScan, CID#1411652 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: sanity check hrq is null before dereferencing itJames Smart
From: Colin Ian King <colin.king@canonical.com> The sanity check for hrq should be moved to before the deference of hrq to ensure we don't perform a null pointer deference. Detected by CoverityScan, CID#1411650 ("Dereference before null check") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: remove redundant assignment of sgelJames Smart
From: Colin Ian King <colin.king@canonical.com> In the NVMET_FCOP_RSP case, sgel is assigned but never used and hence is redundant and can be removed. Detected by CoverityScan, CID#1411658 ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: replace init_timer by setup_timerTomas Jasek
This patch shortens every init_timer in lpfc module followed by function and data assignment using setup_timer. This is purely cleanup patch, it does not add new functionality nor remove any existing functionality. An init_timer call in this form: init_timer(&vport->fc_disctmo); vport->fc_disctmo.function = lpfc_disc_timeout; vport->fc_disctmo.data = vport; is shortened to: setup_timer(&vport->fc_disctmo, lpfc_disc_timeout, vport); It increases readability and reduces chances of mistakes done by developers. Signed-off-by: Tomas Jasek <tomsik68@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: <linux-scsi@vger.kernel.org> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: qedf: Use vsprintf extension %padJoe Perches
Using %llx for a dma_addr_t can lead to format/argument mismatches. Use %pad and the address of the dma_addr_t instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-14 17:09:58 +0000