| Age | Commit message (Collapse) | Author |
|---|
|
If a driver raises a connection error before the connection is bound, we
can leave a cleanup_work queued that can later run and disconnect/stop a
connection that is logged in. The problem is that drivers can call
iscsi_conn_error_event for endpoints that are connected but not yet bound
when something like the network port they are using is brought down.
iscsi_cleanup_conn_work_fn will check for this and exit early, but if the
cleanup_work is stuck behind other works, it might not get run until after
userspace has done ep_disconnect. Because the endpoint is not yet bound
there was no way for ep_disconnect to flush the work.
The bug of leaving stop_conns queued was added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
and:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
was supposed to fix it, but left this case.
This patch moves the conn state check to before we even queue the work so
we can avoid queueing.
Link: https://lore.kernel.org/r/20220408001314.5014-7-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If iscsid is doing a stop_conn at the same time the kernel is starting
error recovery we can hit a race that allows the cleanup work to run on a
valid connection. In the race, iscsi_if_stop_conn sees the cleanup bit set,
but it calls flush_work on the clean_work before iscsi_conn_error_event has
queued it. The flush then returns before the queueing and so the
cleanup_work can run later and disconnect/stop a conn while it's in a
connected state.
The patch:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
added the late stop_conn call bug originally, and the patch:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
attempted to fix it but only fixed the normal EH case and left the above
race for the iscsid restart case. For the normal EH case we don't hit the
race because we only signal userspace to start recovery after we have done
the queueing, so the flush will always catch the queued work or see it
completed.
For iscsid restart cases like boot, we can hit the race because iscsid will
call down to the kernel before the kernel has signaled any error, so both
code paths can be running at the same time. This adds a lock around the
setting of the cleanup bit and queueing so they happen together.
Link: https://lore.kernel.org/r/20220408001314.5014-6-michael.christie@oracle.com
Fixes: 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in kernel space")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch fixes a bug where when using iSCSI offload we can free an
endpoint while userspace still thinks it's active. That then causes the
endpoint ID to be reused for a new connection's endpoint while userspace
still thinks the ID is for the original connection. Userspace will then end
up disconnecting a running connection's endpoint or trying to bind to
another connection's endpoint.
This bug is a regression added in:
Commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
where we added a in kernel ep_disconnect call to fix a bug in:
Commit 0ab710458da1 ("scsi: iscsi: Perform connection failure entirely in
kernel space")
where we would call stop_conn without having done ep_disconnect. This early
ep_disconnect call will then free the endpoint and it's ID while userspace
still thinks the ID is valid.
Fix the early release of the ID by having the in kernel recovery code keep
a reference to the endpoint until userspace has called into the kernel to
finish cleaning up the endpoint/connection. It requires the previous commit
"scsi: iscsi: Release endpoint ID when its freed" which moved the freeing
of the ID until when the endpoint is released.
Link: https://lore.kernel.org/r/20220408001314.5014-5-michael.christie@oracle.com
Fixes: 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling")
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When userspace restarts during boot or upgrades it won't know about the
offload driver's endpoint and connection mappings. iscsid will start by
cleaning up the old session by doing a stop_conn call. Later, if we are
able to create a new connection, we clean up the old endpoint during the
binding stage. The problem is that if we do stop_conn before doing the
ep_disconnect call offload, drivers can still be executing I/O. We then
might free tasks from the under the card/driver.
This moves the ep_disconnect call to before we do the stop_conn call for
this case. It will then work and look like a normal recovery/cleanup
procedure from the driver's point of view.
Link: https://lore.kernel.org/r/20220408001314.5014-3-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch moves iscsi_ep_disconnect() so it can be called earlier in the
next patch.
Link: https://lore.kernel.org/r/20220408001314.5014-2-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Executing driver on servers with more than 32 CPUs were faced with command
timeouts. This is because we were not geting completions for commands
submitted on IQ32 - IQ63.
Set E64Q bit to enable upper inbound and outbound queues 32 to 63 in the
MPI main configuration table.
Added 500ms delay after successful MPI initialization as mentioned in
controller datasheet.
Link: https://lore.kernel.org/r/20220411064603.668448-3-Ajish.Koshy@microchip.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.
To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.
Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com
Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Revert the patch mentioned in the subject since it blocks I/O after module
unload has started while this is a legitimate use case. For e.g. blktests
test case srp/001 that patch causes a command timeout to be triggered for
the following call stack:
__schedule+0x4c3/0xd20
schedule+0x82/0x110
schedule_timeout+0x122/0x200
io_schedule_timeout+0x7b/0xc0
__wait_for_common+0x2bc/0x380
wait_for_completion_io_timeout+0x1d/0x20
blk_execute_rq+0x1db/0x200
__scsi_execute+0x1fb/0x310
sd_sync_cache+0x155/0x2c0 [sd_mod]
sd_shutdown+0xbb/0x190 [sd_mod]
sd_remove+0x5b/0x80 [sd_mod]
device_remove+0x9a/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
__scsi_remove_device+0x168/0x1a0
scsi_forget_host+0xa8/0xb0
scsi_remove_host+0x9b/0x150
sdebug_driver_remove+0x3d/0x140 [scsi_debug]
device_remove+0x6f/0xb0
device_release_driver_internal+0x2c5/0x360
device_release_driver+0x12/0x20
bus_remove_device+0x1aa/0x270
device_del+0x2d4/0x640
device_unregister+0x18/0x70
sdebug_do_remove_host+0x138/0x180 [scsi_debug]
scsi_debug_exit+0x45/0xd5 [scsi_debug]
__do_sys_delete_module.constprop.0+0x210/0x320
__x64_sys_delete_module+0x1f/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lore.kernel.org/r/20220409043704.28573-1-bvanassche@acm.org
Fixes: 2aad3cd85370 ("scsi: scsi_debug: Address races following module load")
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Bob Pearson <rpearsonhpe@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When building with CONFIG_PM=y and CONFIG_PM_SLEEP=n (such as ARCH=riscv
allmodconfig), the following warnings/errors occur:
drivers/gpu/drm/msm/adreno/adreno_device.c:679:12: error: 'adreno_system_resume' defined but not used [-Werror=unused-function]
679 | static int adreno_system_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/adreno/adreno_device.c:655:12: error: 'adreno_system_suspend' defined but not used [-Werror=unused-function]
655 | static int adreno_system_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
These functions are only used in SET_SYSTEM_SLEEP_PM_OPS(), which
evaluates to empty when CONFIG_PM_SLEEP is not set, making these
functions unused.
To resolve this, use the SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS()
macros, which were introduced in commit 1a3c7bb08826 ("PM: core: Add new
*_PM_OPS macros, deprecate old ones"). They are designed to avoid these
compiler warnings while still guarding their use on
CONFIG_PM{,_SLEEP}=y.
Fixes: 7e4167c9e021 ("drm/msm/gpu: Park scheduler threads for system suspend")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220411181249.2758344-1-nathan@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-08
Alexander fixes a use after free issue with aRFS for ice driver.
Mateusz reverts a commit that introduced issues related to device
resets for iavf driver.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
Revert "iavf: Fix deadlock occurrence during resetting VF interface"
ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
====================
Link: https://lore.kernel.org/r/20220408163411.2415552-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the PHY fails on calibration we were previously skipping the ddi
initialization. However the driver is not really prepared for that,
ultimately leading to a NULL pointer dereference:
[ 75.748348] i915 0000:03:00.0: [drm:intel_modeset_init_nogem [i915]] SNPS PHY A failed to calibrate; output will not be used.
...
[ 75.750336] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled
...
( no DDI A/PHY A )
[ 75.753080] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A
[ 75.753164] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:245:DDI C/PHY C] hw state readout: disabled, pipe A
...
[ 75.754425] i915 0000:03:00.0: [drm] *ERROR* crtc 80: Can't calculate constants, dotclock = 0!
[ 75.765558] i915 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev))
[ 75.765569] WARNING: CPU: 5 PID: 1759 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x347/0x360
...
[ 75.781230] BUG: kernel NULL pointer dereference, address: 000000000000007c
[ 75.788198] #PF: supervisor read access in kernel mode
[ 75.793347] #PF: error_code(0x0000) - not-present page
[ 75.798480] PGD 0 P4D 0
[ 75.801019] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 75.805377] CPU: 5 PID: 1759 Comm: modprobe Tainted: G W 5.18.0-rc1-demarchi+ #199
[ 75.827613] RIP: 0010:icl_aux_power_well_disable+0x3b/0x200 [i915]
[ 75.833890] Code: 83 ec 30 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 48 8b 06 0f b6 70 1c f6 40 20 04 8d 56 fa 0f 45 f2 e8 88 bd ff ff 48 89 ef <8b> 70 7c e8 ed 67 ff ff 48 89 ef 89 c6 e8 73 67 ff ff 84 c0 75 0a
[ 75.852629] RSP: 0018:ffffc90003a7fb30 EFLAGS: 00010246
[ 75.857852] RAX: 0000000000000000 RBX: ffff8881145e8f10 RCX: 0000000000000000
[ 75.864978] RDX: ffff888115220840 RSI: 0000000000000000 RDI: ffff888115220000
[ 75.872106] RBP: ffff888115220000 R08: ffff88888effffe8 R09: 00000000fffdffff
[ 75.879234] R10: ffff88888e200000 R11: ffff88888ed00000 R12: ffff8881145e8f10
[ 75.886363] R13: 0000000000000001 R14: ffff888115223240 R15: 0000000000000000
[ 75.893490] FS: 00007ff6e753a740(0000) GS:ffff88888f680000(0000) knlGS:0000000000000000
[ 75.901573] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 75.907313] CR2: 000000000000007c CR3: 00000001216a6001 CR4: 0000000000770ee0
[ 75.914446] PKRU: 55555554
[ 75.917153] Call Trace:
[ 75.919603] <TASK>
[ 75.921709] intel_power_domains_sanitize_state+0x88/0xb0 [i915]
[ 75.927814] intel_modeset_init_nogem+0x317/0xef0 [i915]
[ 75.933205] i915_driver_probe+0x5f6/0xdf0 [i915]
[ 75.937976] i915_pci_probe+0x51/0x1d0 [i915]
We skip the initialization of PHY A, but later we try to find out what
is the phy for that power well and dereference dig_port, which is NULL.
Failing the PHY calibration could be left as a warning or error, like it
was before commit b4eb76d82a0e ("drm/i915/dg2: Skip output init on PHY
calibration failure"). However that often fails for outputs not being
used, which would make the warning/error appear on systems that have no
visible issues. Anyway, there is still a need to fix those failures,
but that is left for later.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220410061537.4187383-1-lucas.demarchi@intel.com
|
|
The only use of the global variables in r600_blit_shaders.c
were in the old drivers/gpu/drm/radeon/r600_blit.c
This file was removed in
commit 8333f607a631 ("drm/radeon: remove UMS support")
So remove the r600_blit_shaders.[c|h] files
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
The dGPU cannot enter PSR when it is not connected to a panel.
[HOW]
Added a check to dc_link_set_psr_allow_active
which returns early if panel is disconnected.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Reviewed-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Nicholas Choi <Nicholas.Choi@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Max Erenberg <merenber@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Z10 is should not be enabled by default on DCN31.
[HOW]
Using DC debug flags to disable Z10 by default on DCN31.
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Saaem Rizvi <syerizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When booting, the driver waits for the MPC idle bit to be set as part of
pipe initialization. However, on some systems this occurs before OTG is
enabled, and since the MPC idle bit won't be set until the vupdate
signal occurs (which requires OTG to be enabled), this never happens and
the wait times out. This can add hundreds of milliseconds to the boot
time.
[How]
Do not wait for mpc idle if tg is disabled
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Z10 and S0i3 have some shared path. Previous code clean up ,
incorrectly removed these pointers, which breaks s0i3 restore
[How]
Do not clear the function pointers based on Z10 disable.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order to debug ras error, driver will print IPID/SYND/MISC0
register value if detect correctable or uncorrectable error.
Provide umc_query_error_status_helper function to reduce code
redundancy.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use div_u64() rather than a a 64 bit divide.
Fixes: 3fe5739db48843 ("drm/amd/display: Add flip interval workaround")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Angus Wang <Angus.Wang@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
|
|
Instead of the 'amdgpu_ring_priority_level' type,
the 'amdgpu_gfx_pipe_priority' type was used,
which is an error when setting ring priority.
This is a minor error, but may cause problems in the future.
Instead of AMDGPU_RING_PRIO_2 = 2, we can use AMDGPU_RING_PRIO_MAX = 3,
but AMDGPU_RING_PRIO_2 = 2 is used for compatibility with
AMDGPU_GFX_PIPE_PRIO_HIGH = 2, and not change the behavior of the
code.
Signed-off-by: Grigory Vasilyev <h0tc0d3@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cayman_default_state and cayman_default_size are only
used in ni.c. Single file symbols should be static.
So move their definitions to cayman_blit_shaders.h
and change their storage-class-specifier to static.
Remove unneeded cayman_blit_shader.c
cayman_ps/vs definitions were removed with
commit 4f8629675800 ("drm/radeon/kms: remove r6xx+ blit copy routines")
So their declarations in cayman_blit_shader.h
are not needed, so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The data revision was not changed to 5 from 4 when the CG flags
were extended to 64-bits. Since this was missed I took
the opportunity to add future upper 64-bits of PG flags
as well so we don't need to bump it again when that comes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add CONFIG_X86 check to fix the build error.
Fixes: 49aa98ca30cd18 ("drm/amd/amdgpu: Only reserve vram for firmware with vega9 MS_HYPERV host.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Application could change XNACK enabled to disabled while KFD is draining
stale retry fault, therefore the check for whether to drain retry faults
must be before the check for whether xnack_enabled, to avoid report
incorrect vm fault after application changes XNACK mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use flexible array member in ip discovery struct as recommended[1].
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
v2: squash in struct_size fixes
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
tusb1210_probe_charger_detect() must be undone by a corresponding
tusb1210_remove_charger_detect() in the error handling path, as already
done in the remove function.
Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/07c4926c42243cedb3b6067a241bb486fdda01b5.1648991162.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The return value of kzalloc() needs to be checked.
To avoid use of null pointer '&state->base' in case of the
failure of alloc.
Fixes: 99665d072183 ("drm: mali-dp: add malidp_crtc_state struct")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn
|
|
iommu_get_domain_for_dev() is already perfectly happy to return NULL
if the given device has no IOMMU. Drop the unnecessary check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5049994e6c2ba92c2f30d51850c8929136d0f8ca.1649167878.git.robin.murphy@arm.com
|
|
If drm_universal_plane_init() fails early we jump to the common cleanup code
that calls komeda_plane_destroy() which in turn could access the uninitalised
drm_plane and crash. Return early if an error is detected without going through
the common code.
Reported-by: Steven Price <steven.price@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com
|
|
In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to
formats and used in drm_universal_plane_init().
drm_universal_plane_init() passes formats to
__drm_universal_plane_init(). __drm_universal_plane_init() further
passes formats to memcpy() as src parameter, which could lead to an
undefined behavior bug on failure of komeda_get_layer_fourcc_list().
Fix this bug by adding a check of formats.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_DRM_KOMEDA=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 61f1c4a8ab75 ("drm/komeda: Attach komeda_dev to DRM-KMS")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/dri-devel/20211201033704.32054-1-zhou1615@umn.edu
|
|
The actions of of_find_i2c_device_by_node() in probe function should be
reversed in error paths by putting the reference to obtained device.
Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407091857.230386-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
of_parse_phandle() returns node pointer with refcount incremented, use
of_node_put() on it to decrease refcount when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220408095617.2495234-1-lv.ruyi@zte.com.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is possible circular locking dependency detected on event_mutex
(see below logs). This is due to set fail safe mode is done at
dp_panel_read_sink_caps() within event_mutex scope. To break this
possible circular locking, this patch move setting fail safe mode
out of event_mutex scope.
[ 23.958078] ======================================================
[ 23.964430] WARNING: possible circular locking dependency detected
[ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted
[ 23.977219] ------------------------------------------------------
[ 23.983570] DrmThread/1574 is trying to acquire lock:
[ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164
[ 23.997895]
[ 23.997895] but task is already holding lock:
[ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c
[ 24.012495]
[ 24.012495] which lock already depends on the new lock.
[ 24.012495]
[ 24.020886]
[ 24.020886] the existing dependency chain (in reverse order) is:
[ 24.028570]
[ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}:
[ 24.035472] __mutex_lock+0xc8/0x384
[ 24.039695] mutex_lock_nested+0x54/0x74
[ 24.044272] lock_crtcs+0x80/0x8c
[ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.053413] commit_tail+0x7c/0xfc
[ 24.057452] drm_atomic_helper_commit+0x158/0x15c
[ 24.062826] drm_atomic_commit+0x60/0x74
[ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.072508] drm_ioctl_kernel+0xe8/0x168
[ 24.077086] drm_ioctl+0x320/0x370
[ 24.081123] drm_compat_ioctl+0x40/0xdc
[ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.090895] invoke_syscall+0x80/0x114
[ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.100668] do_el0_svc_compat+0x2c/0x54
[ 24.105242] el0_svc_compat+0x4c/0xe4
[ 24.109548] el0t_32_sync_handler+0xc4/0xf4
[ 24.114381] el0t_32_sync+0x178
[ 24.118688]
[ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}:
[ 24.125408] __mutex_lock+0xc8/0x384
[ 24.129628] mutex_lock_nested+0x54/0x74
[ 24.134204] lock_crtcs+0x80/0x8c
[ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.143345] commit_tail+0x7c/0xfc
[ 24.147382] drm_atomic_helper_commit+0x158/0x15c
[ 24.152755] drm_atomic_commit+0x60/0x74
[ 24.157323] drm_atomic_helper_set_config+0x68/0x90
[ 24.162869] drm_mode_setcrtc+0x394/0x648
[ 24.167535] drm_ioctl_kernel+0xe8/0x168
[ 24.172102] drm_ioctl+0x320/0x370
[ 24.176135] drm_compat_ioctl+0x40/0xdc
[ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.185904] invoke_syscall+0x80/0x114
[ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.195673] do_el0_svc_compat+0x2c/0x54
[ 24.200241] el0_svc_compat+0x4c/0xe4
[ 24.204544] el0t_32_sync_handler+0xc4/0xf4
[ 24.209378] el0t_32_sync+0x174/0x178
[ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}:
[ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878
[ 24.225951] ww_mutex_lock+0x60/0xd0
[ 24.230166] modeset_lock+0x190/0x19c
[ 24.234467] drm_modeset_lock+0x34/0x54
[ 24.238953] drmm_mode_config_init+0x550/0x764
[ 24.244065] msm_drm_bind+0x170/0x59c
[ 24.248374] try_to_bring_up_master+0x244/0x294
[ 24.253572] __component_add+0xf4/0x14c
[ 24.258057] component_add+0x2c/0x38
[ 24.262273] dsi_dev_attach+0x2c/0x38
[ 24.266575] dsi_host_attach+0xc4/0x120
[ 24.271060] mipi_dsi_attach+0x34/0x48
[ 24.275456] devm_mipi_dsi_attach+0x28/0x68
[ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc
[ 24.285137] auxiliary_bus_probe+0x78/0x90
[ 24.289893] really_probe+0x1e4/0x3d8
[ 24.294194] __driver_probe_device+0x14c/0x164
[ 24.299298] driver_probe_device+0x54/0xf8
[ 24.304043] __device_attach_driver+0xb4/0x118
[ 24.309145] bus_for_each_drv+0xb0/0xd4
[ 24.313628] __device_attach+0xcc/0x158
[ 24.318112] device_initial_probe+0x24/0x30
[ 24.322954] bus_probe_device+0x38/0x9c
[ 24.327439] deferred_probe_work_func+0xd4/0xf0
[ 24.332628] process_one_work+0x2f0/0x498
[ 24.337289] process_scheduled_works+0x44/0x48
[ 24.342391] worker_thread+0x1e4/0x26c
[ 24.346788] kthread+0xe4/0xf4
[ 24.350470] ret_from_fork+0x10/0x20
[ 24.354683]
[ 24.354683]
[ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}:
[ 24.361489] drm_modeset_acquire_init+0xe4/0x138
[ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114
[ 24.372327] check_connector_changed+0xbc/0x198
[ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c
[ 24.382804] dsi_hpd_worker+0x24/0x30
[ 24.387104] process_one_work+0x2f0/0x498
[ 24.391762] worker_thread+0x1d0/0x26c
[ 24.396158] kthread+0xe4/0xf4
[ 24.399840] ret_from_fork+0x10/0x20
[ 24.404053]
[ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}:
[ 24.411032] __mutex_lock+0xc8/0x384
[ 24.415247] mutex_lock_nested+0x54/0x74
[ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c
[ 24.425108] dp_display_process_hpd_high+0x34/0xd4
[ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c
[ 24.436205] hpd_event_thread+0x2ac/0x550
[ 24.440864] kthread+0xe4/0xf4
[ 24.444544] ret_from_fork+0x10/0x20
[ 24.448757]
[ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}:
[ 24.455116] __lock_acquire+0xe2c/0x10d8
[ 24.459690] lock_acquire+0x1ac/0x2d0
[ 24.463988] __mutex_lock+0xc8/0x384
[ 24.468201] mutex_lock_nested+0x54/0x74
[ 24.472773] msm_dp_display_enable+0x58/0x164
[ 24.477789] dp_bridge_enable+0x24/0x30
[ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c
[ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244
[ 24.494801] msm_atomic_commit_tail+0x248/0x3d0
[ 24.499992] commit_tail+0x7c/0xfc
[ 24.504031] drm_atomic_helper_commit+0x158/0x15c
[ 24.509404] drm_atomic_commit+0x60/0x74
[ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.519079] drm_ioctl_kernel+0xe8/0x168
[ 24.523650] drm_ioctl+0x320/0x370
[ 24.527689] drm_compat_ioctl+0x40/0xdc
[ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.537463] invoke_syscall+0x80/0x114
[ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.547235] do_el0_svc_compat+0x2c/0x54
[ 24.551806] el0_svc_compat+0x4c/0xe4
[ 24.556106] el0t_32_sync_handler+0xc4/0xf4
[ 24.560948] el0t_32_sync+0x174/0x178
Changes in v2:
-- add circular lockiing trace
Fixes: d4aca422539c ("drm/msm/dp: always add fail-safe mode into connector mode list")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481396/
Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The member 'msm_dsi->connector' isn't assigned until
msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and
how it assigns the return value). Therefore this pointer is going to be
NULL here. Let's use 'connector' which is what was intended.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/478693/
Link: https://lore.kernel.org/r/20220318000731.2823718-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Even if some IOMMU has registered itself on the platform "bus", that
doesn't necessarily mean it provides translation for the device we
care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/480707/
Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The fourth param is size, rather than range_end.
Note that we could increase the address space size if we had a way to
prevent buffers from spanning a 4G split, mostly just to avoid fw bugs
with 64b math.
Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220407202836.1211268-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
A specialisation of the generic Synopsys HDMI driver is employed for
JZ4780 HDMI support. This requires a new driver, plus device tree and
configuration modifications.
Here we add Kconfig DRM_INGENIC_DW_HDMI, Makefile and driver code.
Note that there is no hpd-gpio installed on the CI20 board HDMI
connector. Hence there is no hpd detection by the connector driver
and we have to enable polling in the dw-hdmi core driver.
For that we need to set .poll_enabled but that struct component
can only be accessed by core code. Hence we use the public
setter function drm_kms_helper_hotplug_event() introduced before.
Also note that we disable Color Space Conversion since it is not
working on jz4780.
Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e5cdf9cd44bde52cce379cc830f2d6117ea15c32.1649330171.git.hns@goldelico.com
|
|
The .atomic_get_input_bus_fmts() callback of our top bridge should
return the possible input formats for a given output format. If the
requested output format is not supported, then NULL should be returned,
otherwise the bus format negociation will end with a bus format that the
encoder does not support.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/ab25925723cff2f3e773e7137567ef86fff5fdba.1649330171.git.hns@goldelico.com
|
|
"hdmi-connector.yaml" bindings defines an optional property
"ddc-en-gpios" for a single gpio to enable DDC operation.
Usually this controls +5V power on the HDMI connector.
This +5V may also be needed for HPD.
This was not reflected in code but is needed to make the CI20
board work.
Now, the driver activates the ddc gpio after probe and
deactivates after remove so it is "almost on".
But only if this driver is loaded (and not e.g. blacklisted
as module).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/3607e924b7c0cf0be956c0d49894be1442dbda41.1649330171.git.hns@goldelico.com
|
|
Make tusb1210_chg_det_states static, fixing the following sparse warning:
drivers/phy/ti/phy-tusb1210.c:158:12: sparse: sparse:
symbol 'tusb1210_chg_det_states' was not declared. Should it be static?
Fixes: 48969a5623ed ("phy: ti: tusb1210: Add charger detection")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220411135440.558394-1-hdegoede@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
of_parse_phandle() returns NULL on errors, rather than error
pointers. Using NULL check on grp_np to fix this.
Fixes: d078cd1b4185 ("dmaengine: imx-sdma: Add imx6sx platform support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308064952.15743-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
That should have been max, not min.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: c8d4c18bfbc4 ("dma-buf/drivers: make reserving a shared slot mandatory v4")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411134537.2854-1-christian.koenig@amd.com
|
|
If ret isn't zero, it is almost for sure ETIMEDOUT, because
we use it in wait_for macro which does continuous retries
until timeout is reached. If we still ran out of time and
retries, we most likely would be interested in getting status,
to understand what was the actual error propagated from PCode,
rather than to find out that we had a time out, which is anyway
quite obvious, if the function fails.
v2: Make it status ? status : ret(thanks Vinod for the hint)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411081343.18099-1-stanislav.lisovskiy@intel.com
|
|
Currently skl_pcode_try_request function doesn't
properly handle return value it gets from
snb_pcode_rw, but treats status != 0 as success,
returning true, which basically doesn't allow
to use retry/timeout mechanisms if PCode happens
to be busy and returns EGAIN or some other status
code not equal to 0.
We saw this on real hw and also tried simulating this
by always returning -EAGAIN from snb_pcode_rw for 6 times, which
currently will just result in false success, while it should
have tried until timeout is reached:
[ 22.357729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to
307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
[ 22.357831] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 1
[ 22.357892] i915 0000:00:02.0: [drm:skl_pcode_request [i915]] Success, exiting
[ 22.357936] i915 0000:00:02.0: [drm] ERROR Failed to inform PCU about cdclk change (err -11, freq 307200)
We see en error because higher level api, still notices that status was wrong,
however we still did try only once.
We fix it by requiring _both_ the status to be 0 and
request/reply match for success(true) and function
should return failure(false) if either status turns
out to be EAGAIN, EBUSY or whatever or reply/request
masks do not match.
So now we see this in the logs:
[ 22.318667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to
307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
[ 22.318782] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 1
[ 22.318849] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 2
[ 22.319006] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 3
[ 22.319091] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 4
[ 22.319158] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 5
[ 22.319224] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 6
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220408125200.9069-2-stanislav.lisovskiy@intel.com
|
|
Add a simple check to reject any size not aligned to the
min_page_size.
when size is not aligned to min_page_size, driver module
should handle in their own way either to round_up() the
size value to min_page_size or just to enable WARN_ON().
If we dont handle the alignment properly, we may hit the
following bug, Unigine Heaven has allocation requests for
example required pages are 257 and alignment request is 256.
To allocate the left over 1 page, continues the iteration to
find the order value which is 0 and when it compares with
min_order = 8, triggers the BUG_ON(order < min_order).
v2: add more commit description
v3: remove WARN_ON()
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411073834.15210-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The bug is here:
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.
Cc: stable@vger.kernel.org
Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
