| Age | Commit message (Collapse) | Author |
|---|
|
mt76 patches for 6.3
- fixes
- mt7996 cleanups
- switch to page pool allocator
- mt7996 eht support
- WED reset support
|
|
vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes.
But it can be called after setting a ring base with
vdpasim_set_vq_state.
Fix it by stashing them. They're still resetted in vdpasim_vq_reset.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230118164359.1523760-2-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Add CLOCK_EVT_FEAT_DYNIRQ to allow the IRQ could be runtime set affinity
to the cores that needs wake up, otherwise saying core0 has to send
IPI to wakeup core1. With CLOCK_EVT_FEAT_DYNIRQ set, when broadcast
timer could wake up the cores, IPI is not needed.
After enabling this feature, especially the scene where cpuidle is
enabled can benefit.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230209040239.24710-1-frank.li@vivo.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a em_sti device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193010.469495-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_tmu device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230207193614.472060-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
A static key is used to select between SBI and Sstc timer usage in
riscv_clock_next_event(), but currently the direction is resolved
after cpuhp_setup_state() is called (which sets the next event). The
first event will therefore fall through the sbi_set_timer() path; this
breaks Sstc-only systems. So, apply the jump patching before first
use.
Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Signed-off-by: Matt Evans <mev@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/CDDAB2D0-264E-42F3-8E31-BA210BEB8EC1@rivosinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Add delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-3-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Microchip PIT64B is currently available on ARM based devices. Thus
select it only for ARM. This allows implementing delay timer.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203130537.1921608-2-claudiu.beznea@microchip.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Having a clocksource_arch_init() callback always sets vdso_clock_mode to
VDSO_CLOCKMODE_ARCHTIMER if GENERIC_GETTIMEOFDAY is enabled, this is
required for the riscv-timer.
This works for platforms where just riscv-timer clocksource is present.
On platforms where other clock sources are available we want them to
register with vdso_clock_mode set to VDSO_CLOCKMODE_NONE.
On the Renesas RZ/Five SoC OSTM block can be used as clocksource [0], to
avoid multiple clock sources being registered as VDSO_CLOCKMODE_ARCHTIMER
move setting of vdso_clock_mode in the riscv-timer driver instead of doing
this in clocksource_arch_init() callback as done similarly for ARM/64
architecture.
[0] drivers/clocksource/renesas-ostm.c
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221229224601.103851-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The comment in the remove callback suggests that the driver is not
supposed to be unbound. However returning an error code in the remove
callback doesn't accomplish that. Instead set the suppress_bind_attrs
property (which makes it impossible to unbind the driver via sysfs).
The only remaining way to unbind a sh_cmt device would be module
unloading, but that doesn't apply here, as the driver cannot be built as
a module.
Also drop the useless remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230123220221.48164-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
COMPILE_TEST
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230121182911.4e47a5ff@endymion.delvare
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
RISC-V provides an architectural clock source via the time CSR. This
clock source exposes a 64-bit counter synchronized across all CPUs.
Because it is accessed using a CSR, it is much more efficient to read
than MMIO clock sources. For example, on the Allwinner D1, reading the
sun4i timer in a loop takes 131 cycles/iteration, while reading the
RISC-V time CSR takes only 5 cycles/iteration.
Adjust the RISC-V clock source rating so it is preferred over the
various platform-specific MMIO clock sources.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20221228004444.61568-1-samuel@sholland.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
We should set CLOCK_EVT_FEAT_C3STOP for a clock_event_device only
when riscv,timer-cannot-wake-cpu DT property is present in the RISC-V
timer DT node.
This way CLOCK_EVT_FEAT_C3STOP feature is set for clock_event_device
based on RISC-V platform capabilities rather than having it set for
all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230103141102.772228-4-apatel@ventanamicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
|
|
All preparations are done. Now we can start using new functions and remove
the old code.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reduce code duplicated by migrating phy_init_eee() to
genphy_c45_eee_is_active().
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().
It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.
If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().
It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.
If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add replacement for phy_ethtool_get/set_eee() functions.
Current phy_ethtool_get/set_eee() implementation is great and it is
possible to make it even better:
- this functionality is for devices implementing parts of IEEE 802.3
specification beyond Clause 22. The better place for this code is
phy-c45.c
- currently it is able to do read/write operations on PHYs with
different abilities to not existing registers. It is better to
use stored supported_eee abilities to avoid false read/write
operations.
- the eee_active detection will provide wrong results on not supported
link modes. It is better to validate speed/duplex properties against
supported EEE link modes.
- it is able to support only limited amount of link modes. We have more
EEE link modes...
By refactoring this code I address most of this point except of the last
one. Adding additional EEE link modes will need more work.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function will be needed for genphy_c45_ethtool_get_eee() provided
by next patch.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control
and capability 1" (Register 3.20) content depending on configuration of
"EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect
3.20 register.
So, instead of depending on register 3.20, driver should set supported_eee.
Proper supported_eee configuration is needed to make use of generic
PHY c45 set/get_eee functions provided by next patches.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of KSZ9477 family switches provides EEE support. To enable it, we
just need to register set_mac_eee/set_mac_eee handlers and validate
supported chip version and port.
Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
100BaseTX/Full. Other chips support 100BaseTX/Full and 1000BaseTX/Full.
Low Power Idle configuration is not supported and currently not
documented in the datasheets.
EEE PHY specific tunings are not documented in the switch datasheets, but can
overlap with KSZ9131 specification.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During probe, both sensor buffers need to be queried to
initialize the hwmon channels. This might be slow on some
machines, causing a unnecessary delay during boot.
Mark the driver with PROBE_PREFER_ASYNCHRONOUS so that it
can be probed asynchronously.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230209211503.2739-3-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Thanks to bugreport 216655 on bugzilla triggered by the
dell-smm-hwmon driver, the contents of the sensor buffers
could be almost completely decoded.
Add an hwmon interface for exposing the fan and thermal
sensor values. Since the WMI interface can be quite slow
on some machines, the sensor buffers are cached for 1 second
to lessen the performance impact.
The debugfs interface remains in place to aid in reverse-engineering
of unknown sensor types and the thermal buffer.
Tested-by: Antonín Skala <skala.antonin@gmail.com>
Tested-by: Gustavo Walbon <gustavowalbon@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230209211503.2739-2-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move assignment of bus shift setting out of the loop to avoid redundant
operation.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-13-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Extend writeable, readable, volatile registers of the 'regmap' object
with for I2C mux selector registers.
The motivation is to pass this object extended with selector registers
to I2C mux driver working over ‘regmap’.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-12-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
configuration
Currently hotplug configuration in logic device assumes that all items
are provided with no holes.
Thus, any group of hotplug events, associated with the specific
status/event/mask registers is configured in those registers
successively from bit zero to bit #n (#n < 8).
This logic is changed int order to allow non-successive definition to
support configuration with the skipped bits – for example bits 3, 5, 7
in status/event/mask registers can be associated with hotplug events,
while others can be skipped.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-10-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Motivation is to provide synchronization between I2C main bus and other
platform drivers using this notification callback.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-9-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Split logic in mlxplat_init()/mlxplat_exit() routines.
Separate initialization of I2C infrastructure and others platform
drivers.
Motivation is to provide synchronization between I2C bus and mux
drivers and other drivers using this infrastructure.
I2C main bus and MUX busses are implemented in FPGA logic. On some new
systems the numbers allocated for these busses could be variable
depending on order of initialization of I2C native busses. Since bus
numbers are passed to some other platform drivers during initialization
flow, it is necessary to synchronize completion of I2C infrastructure
drivers and activation of rest of drivers.
Thus initialization flow will be performed in synchronized order.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230208063331.15560-8-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The ionic device has on-board memory (CMB) that can be used
for descriptors as a way to speed descriptor access for faster
packet processing. It is rumored to improve latency and/or
packets-per-second for some profiles of small packet traffic,
although your mileage may vary.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor Code cleanup details.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have the pointer already, don't need to go through the
lif struct for it.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch does the final flag day conversion of all completion
functions which are now all contained in the Crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the request_complete helpers instead of calling the completion
function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
