summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-02-09rtc: pm8xxx: drop spmi error messagesJohan Hovold
Drop the unnecessary error messages after every spmi regmap access, which are not expected to fail. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230202155448.6715-3-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09rtc: pm8xxx: fix set-alarm raceJohan Hovold
Make sure to disable the alarm before updating the four alarm time registers to avoid spurious alarms during the update. Note that the disable needs to be done outside of the ctrl_reg_lock section to prevent a racing alarm interrupt from disabling the newly set alarm when the lock is released. Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC") Cc: stable@vger.kernel.org # 3.1 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: David Collins <quic_collinsd@quicinc.com> Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09Bluetooth: qca: Fix sparse warningsLuiz Augusto von Dentz
This fixes the following warnings: drivers/bluetooth/hci_qca.c:1014:26: warning: cast to restricted __le16 drivers/bluetooth/hci_qca.c:1028:37: warning: cast to restricted __le32 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CEMoises Cardona
This patch adds VID:PID 13d3:3529 to the btusb.c file. This VID:PID is found in the Realtek RTL8821CE module (M.2 module AW-CB304NF on an ASUS E210MA laptop) Output of /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3529 Rev= 1.10 S: Manufacturer=Realtek S: Product=Bluetooth Radio C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Moises Cardona <moisesmcardona@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921Mario Limonciello
This bluetooth device is found in a combo WLAN/BT card for a MediaTek 7921e. The device information: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f2 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Cc: Sean Wang <sean.wang@mediatek.com> Cc: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09Bluetooth: Fix issue with Actions Semi ATS2851 based devicesMarcel Holtmann
Their devices claim to support the erroneous data reporting, but don't actually support the required commands. So blacklist them and add a quirk. < HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0 > HCI Event: Command Status (0x0f) plen 4 Read Default Erroneous Data Reporting (0x03|0x005a) ncmd 1 Status: Unknown HCI Command (0x01) T: Bus=02 Lev=02 Prnt=08 Port=02 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=10d7 ProdID=b012 Rev=88.91 S: Manufacturer=Actions S: Product=general adapter S: SerialNumber=ACTIONS1234 C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=01(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-02-09rtc: rv8803: invalidate date/time if alarm time is invalidSascha Hauer
RTC core never calls rv8803_set_alarm with an invalid alarm time, so if an invalid alarm time > 0 is set, external factors must have corrupted the RTC's alarm time and possibly other registers. Play it safe by marking the date/time invalid, so all registers are reinitialized on a ->set_time. This may cause existing setups to lose time if they so far set only date/time, but ignored that the alarm registers had an invalid date value, e.g.: rtc rtc0: invalid alarm value: 2020-3-27 7:82:0 These systems will have their ->get_time return -EINVAL till ->set_time initializes the alarm value (and sets a new time). Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221123095527.2771434-3-s.hauer@pengutronix.de Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09ACPI: CPPC: Fix some kernel-doc commentsYang Li
Add the description of @pcc_ss_id in pcc_data_alloc(). Add the description of @cpu_num in cppc_get_transition_latency(). clear the below warnings: drivers/acpi/cppc_acpi.c:607: warning: Function parameter or member 'pcc_ss_id' not described in 'pcc_data_alloc' drivers/acpi/cppc_acpi.c:1616: warning: Function parameter or member 'cpu_num' not described in 'cppc_get_transition_latency' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3983 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> [ rjw: Dropped redundant empty code lines, minor edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpuidle: sysfs: make kobj_type structures constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09thermal: intel: powerclamp: Add two module parametersSrinivas Pandruvada
In some use cases, it is desirable to only inject idle on certain set of CPUs. For example on Alder Lake systems, it is possible that we force idle only on P-Cores for thermal reasons. Also the idle percent can be more than 50% if we only choose partial set of CPUs in the system. Introduce 2 new module parameters for this purpose. They can be only changed when the cooling device is inactive. cpumask (Read/Write): A bit mask of CPUs to inject idle. The format of this bitmask is same as used in other subsystems like in /proc/irq/*/smp_affinity. The mask is comma separated 32 bit groups. Each CPU is one bit. For example for 256 CPU system the full mask is: ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff The rightmost mask is for CPU 0-32. max_idle (Read/Write): Maximum injected idle time to the total CPU time ratio in percent range from 1 to 100. Even if the cooling device max_state is always 100 (100%), this parameter allows to add a max idle percent limit. The default is 50, to match the current implementation of powerclamp driver. Also doesn't allow value more than 75, if the cpumask includes every CPU present in the system. Also when the cpumask doesn't include every CPU, there is no use of compensation using package C-state idle counters. Hence don't start package C-state polling thread even for a single package or a single die system in this case. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpuidle: add ARCH_SUSPEND_POSSIBLE dependenciesArnd Bergmann
Some ARMv4 processors don't support suspend, which leads to a build failure with the tegra and qualcomm cpuidle driver: WARNING: unmet direct dependencies detected for ARM_CPU_SUSPEND Depends on [n]: ARCH_SUSPEND_POSSIBLE [=n] Selected by [y]: - ARM_TEGRA_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_TEGRA [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y] arch/arm/kernel/sleep.o: in function `__cpu_suspend': (.text+0x68): undefined reference to `cpu_sa110_suspend_size' (.text+0x68): undefined reference to `cpu_fa526_suspend_size' Add an explicit dependency to make randconfig builds avoid this combination. Fixes: faae6c9f2e68 ("cpuidle: tegra: Enable compile testing") Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") Link: https://lore.kernel.org/all/20211013160125.772873-1-arnd@kernel.org/ Cc: All applicable <stable@vger.kernel.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09thermal: core: Use sysfs_emit_at() instead of scnprintf()ye xingchen
Follow the advice in Documentation/filesystems/sysfs.rst that show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09PM: domains: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make kobj_type structure constantThomas Weißschuh
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definition to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: davinci: Fix clk use after freeUwe Kleine-König
The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used. Fixes: 6601b8030de3 ("davinci: add generic CPUFreq driver for DaVinci") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: amd-pstate: avoid uninitialized variable useArnd Bergmann
The new epp support causes warnings about three separate but related bugs: 1) failing before allocation should just return an error: drivers/cpufreq/amd-pstate.c:951:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (!dev) ^~~~ drivers/cpufreq/amd-pstate.c:1018:9: note: uninitialized use occurs here return ret; ^~~ 2) wrong variable to store return code: drivers/cpufreq/amd-pstate.c:963:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (rc) ^~ drivers/cpufreq/amd-pstate.c:1019:9: note: uninitialized use occurs here return ret; ^~~ drivers/cpufreq/amd-pstate.c:963:2: note: remove the 'if' if its condition is always false if (rc) ^~~~~~~ 3) calling amd_pstate_set_epp() in cleanup path after determining that it should not be called: drivers/cpufreq/amd-pstate.c:1055:6: error: variable 'epp' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (cpudata->epp_policy == cpudata->policy) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/cpufreq/amd-pstate.c:1080:30: note: uninitialized use occurs here amd_pstate_set_epp(cpudata, epp); ^~~ All three are trivial to fix, but most likely there are additional bugs in this function when the error handling was not really tested. Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Wyes Karny <wyes.karny@amd.com> Reviewed-by: Yuan Perry <Perry.Yuan@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09cpufreq: Make cpufreq_unregister_driver() return voidUwe Kleine-König
All but a few drivers ignore the return value of cpufreq_unregister_driver(). Those few that don't only call it after cpufreq_register_driver() succeeded, in which case the call doesn't fail. Make the function return no value and add a WARN_ON for the case that the function is called in an invalid situation (i.e. without a previous successful call to cpufreq_register_driver()). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> # brcmstb-avs-cpufreq.c Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09Add MediaTek MT7986 SPI NAND supportMark Brown
Merge series from Xiangsheng Hou <xiangsheng.hou@mediatek.com>: This patch series split from bellow series which pick-up spi relevant patches https://lore.kernel.org/all/20230130030656.12127-1-xiangsheng.hou@mediatek.com. This series add MediaTek MT7986 SPI NAND controller support, add read latch latency, smaple delay adjust and add optional nfi_hclk.
2023-02-09thermal: intel: powerclamp: Fix duration module parameterSrinivas Pandruvada
After the switch to use the powercap/idle-inject framework in the Intel powerclamp driver, the idle duration unit is microsecond. However, the module parameter for idle duration is in milliseconds, so convert it to microseconds in the "set" callback and back to milliseconds in a new "get" callback. While here, also use mutex protection for setting and getting "duration". The other uses of "duration" are already protected by the mutex. Fixes: 8526eb7fc75a ("thermal: intel: powerclamp: Use powercap idle-inject feature") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-09Merge tag 'pm-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix the incorrect value returned by cpufreq driver's ->get() callback for Qualcomm platforms (Douglas Anderson)" * tag 'pm-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
2023-02-09Merge back cpufreq material for 6.3-rc1.Rafael J. Wysocki
2023-02-09PCI/DPC: Await readiness of secondary bus after resetLukas Wunner
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus Reset, but not after a DPC-induced Hot Reset. As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not observed and devices on the secondary bus may be accessed before they're ready. One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a PCIe switch whose upstream port is not immediately ready after reset. Because its config space is restored too early, it remains in D0uninitialized, its subordinate devices remain inaccessible and DPC recovery fails with messages such as: i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible) intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible) pcieport 0000:89:02.0: AER: device recovery failed Fix it. Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org
2023-02-09vfio/mlx5: Fix range size calculation upon tracker creationYishai Hadas
Fix range size calculation to include the last byte of each range. In addition, log round up the length of the total ranges to be stricter. Fixes: c1d050b0d169 ("vfio/mlx5: Create and destroy page tracker object") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20230208152234.32370-1-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: no need to pass kvm pointer during device openMatthew Rosato
Nothing uses this value during vfio_device_open anymore so it's safe to remove it. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230203215027.151988-3-mjrosato@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: fix deadlock between group lock and kvm lockMatthew Rosato
After 51cdc8bc120e, we have another deadlock scenario between the kvm->lock and the vfio group_lock with two different codepaths acquiring the locks in different order. Specifically in vfio_open_device, vfio holds the vfio group_lock when issuing device->ops->open_device but some drivers (like vfio-ap) need to acquire kvm->lock during their open_device routine; Meanwhile, kvm_vfio_release will acquire the kvm->lock first before calling vfio_file_set_kvm which will acquire the vfio group_lock. To resolve this, let's remove the need for the vfio group_lock from the kvm_vfio_release codepath. This is done by introducing a new spinlock to protect modifications to the vfio group kvm pointer, and acquiring a kvm ref from within vfio while holding this spinlock, with the reference held until the last close for the device in question. Fixes: 51cdc8bc120e ("kvm/vfio: Fix potential deadlock on vfio group_lock") Reported-by: Anthony Krowiak <akrowiak@linux.ibm.com> Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230203215027.151988-2-mjrosato@linux.ibm.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio: revert "iommu driver notify callback"Steve Sistare
Revert this dead code: commit ec5e32940cc9 ("vfio: iommu driver notify callback") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-8-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: revert "implement notify callback"Steve Sistare
This is dead code. Revert it. commit 487ace134053 ("vfio/type1: implement notify callback") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-7-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: revert "block on invalid vaddr"Steve Sistare
Revert this dead code: commit 898b9eaeb3fe ("vfio/type1: block on invalid vaddr") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-6-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: restore locked_vmSteve Sistare
When a vfio container is preserved across exec or fork-exec, the new task's mm has a locked_vm count of 0. After a dma vaddr is updated using VFIO_DMA_MAP_FLAG_VADDR, locked_vm remains 0, and the pinned memory does not count against the task's RLIMIT_MEMLOCK. To restore the correct locked_vm count, when VFIO_DMA_MAP_FLAG_VADDR is used and the dma's mm has changed, add the dma's locked_vm count to the new mm->locked_vm, subject to the rlimit, and subtract it from the old mm->locked_vm. Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr") Cc: stable@vger.kernel.org Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-5-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: track locked_vm per dmaSteve Sistare
Track locked_vm per dma struct, and create a new subroutine, both for use in a subsequent patch. No functional change. Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr") Cc: stable@vger.kernel.org Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-4-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: prevent underflow of locked_vm via exec()Steve Sistare
When a vfio container is preserved across exec, the task does not change, but it gets a new mm with locked_vm=0, and loses the count from existing dma mappings. If the user later unmaps a dma mapping, locked_vm underflows to a large unsigned value, and a subsequent dma map request fails with ENOMEM in __account_locked_vm. To avoid underflow, grab and save the mm at the time a dma is mapped. Use that mm when adjusting locked_vm, rather than re-acquiring the saved task's mm, which may have changed. If the saved mm is dead, do nothing. locked_vm is incremented for existing mappings in a subsequent patch. Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation") Cc: stable@vger.kernel.org Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-3-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09vfio/type1: exclude mdevs from VFIO_UPDATE_VADDRSteve Sistare
Disable the VFIO_UPDATE_VADDR capability if mediated devices are present. Their kernel threads could be blocked indefinitely by a misbehaving userland while trying to pin/unpin pages while vaddrs are being updated. Do not allow groups to be added to the container while vaddr's are invalid, so we never need to block user threads from pinning, and can delete the vaddr-waiting code in a subsequent patch. Fixes: c3cbab24db38 ("vfio/type1: implement interfaces to update vaddr") Cc: stable@vger.kernel.org Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1675184289-267876-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-02-09hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource()Ye Xingchen
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202302081546067270324@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-02-09Merge tag 'net-6.2-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and ipsec subtrees. Current release - regressions: - sched: fix off by one in htb_activate_prios() - eth: mana: fix accessing freed irq affinity_hint - eth: ice: fix out-of-bounds KASAN warning in virtchnl Current release - new code bugs: - eth: mtk_eth_soc: enable special tag when any MAC uses DSA Previous releases - always broken: - core: fix sk->sk_txrehash default - neigh: make sure used and confirmed times are valid - mptcp: be careful on subflow status propagation on errors - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr() - phylink: move phy_device_free() to correctly release phy device - eth: mlx5: - fix crash unsetting rx-vlan-filter in switchdev mode - fix hang on firmware reset - serialize module cleanup with reload and remove" * tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) selftests: forwarding: lib: quote the sysctl values net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used rds: rds_rm_zerocopy_callback() use list_first_entry() net: txgbe: Update support email address selftests: Fix failing VXLAN VNI filtering test selftests: mptcp: stop tests earlier selftests: mptcp: allow more slack for slow test-case mptcp: be careful on subflow status propagation on errors mptcp: fix locking for in-kernel listener creation mptcp: fix locking for setsockopt corner-case mptcp: do not wait for bare sockets' timeout net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0 nfp: ethtool: fix the bug of setting unsupported port speed txhash: fix sk->sk_txrehash default net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg() net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA net: sched: sch: Fix off by one in htb_activate_prios() igc: Add ndo_tx_timeout support net: mana: Fix accessing freed irq affinity_hint hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC ...
2023-02-09Merge tag 'for-linus-2023020901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - fix potential infinite loop with a badly crafted HID device (Xin Zhao) - fix regression from 6.1 in USB logitech devices potentially making their mouse wheel not working (Bastien Nocera) - clean up in AMD sensors, which fixes a long time resume bug (Mario Limonciello) - few device small fixes and quirks * tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreen 29DF on HP HID: amd_sfh: if no sensors are enabled, clean up HID: logitech: Disable hi-res scrolling on USB HID: core: Fix deadloop in hid_apply_multiplier. HID: Ignore battery for Elan touchscreen on Asus TP420IA HID: elecom: add support for TrackBall 056E:011C
2023-02-09spi: mtk-snfi: Add snfi sample delay and read latency adjustmentXiangsheng Hou
Add snfi sample delay and read latency adjustment which can get from dts property. Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230201020921.26712-5-xiangsheng.hou@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-09spi: mtk-snfi: Add optional nfi_hclk which is needed for MT7986Xiangsheng Hou
Add optional nfi_hclk which is needed for MT7986. Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230201020921.26712-3-xiangsheng.hou@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-09spi: mtk-snfi: Change default page format to setup default settingXiangsheng Hou
Change default page format to setup default setting since the sector size 1024 on MT7986 will lead to probe fail. Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com> Link: https://lore.kernel.org/r/20230201020921.26712-2-xiangsheng.hou@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-02-09cxl/mem: Correct full ID range allocationDavidlohr Bueso
For ID allocations we want 0-(max-1), ie: smatch complains: error: Calling ida_alloc_range() with a 'max' argument which is a power of 2. -1 missing? Correct this and also replace the call to use the max() flavor instead. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230208181944.240261-1-dave@stgolabs.net Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-02-09net/i40e: Replace 0-length array with flexible arrayKees Cook
Zero-length arrays are deprecated[1]. Replace struct i40e_lump_tracking's "list" 0-length array with a flexible array. Detected with GCC 13, using -fstrict-flex-arrays=3: In function 'i40e_put_lump', inlined from 'i40e_clear_interrupt_scheme' at drivers/net/ethernet/intel/i40e/i40e_main.c:5145:2: drivers/net/ethernet/intel/i40e/i40e_main.c:278:27: warning: array subscript <unknown> is outside array bounds of 'u16[0]' {aka 'short unsigned int[]'} [-Warray-bounds=] 278 | pile->list[i] = 0; | ~~~~~~~~~~^~~ drivers/net/ethernet/intel/i40e/i40e.h: In function 'i40e_clear_interrupt_scheme': drivers/net/ethernet/intel/i40e/i40e.h:179:13: note: while referencing 'list' 179 | u16 list[0]; | ^~~~ [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use ERR_PTR error print in i40e messagesJan Sokolowski
In i40e_status removal patches, i40e_status conversion to strings was removed in order to easily refactor the code to use standard errornums. This however made it more difficult for read error logs. Use %pe formatter to print error messages in human-readable format. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: use int for i40e_statusJan Sokolowski
To prepare for removal of i40e_status, change the variables from i40e_status to int. This eases the transition when values are changed to return standard int error codes over enum i40e_status. As such changes often also change variable orders, a cleanup is also applied here to make variables conform to RCT and some lines are also reformatted where applicable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: Remove string printing for i40e_statusJan Sokolowski
Remove the i40e_stat_str() function which prints the string representation of the i40e_status error code. With upcoming changes moving away from i40e_status, there will be no need for this function Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09i40e: Remove unused i40e status codesJan Sokolowski
In an effort to remove i40e status codes and replace them with standard kernel errornums, unused values of i40e_status_code were removed. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 3.1.5"Alex Deucher
This reverts commit 3cc67fe1b3aa1ac4720e002f2aa2d08c9199a584. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 2.1.0"Alex Deucher
This reverts commit 2404f9b0ea0153c3fddb0c4d7a43869dc8608f6f. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"Alex Deucher
This reverts commit f081cd4ca2658752a8c0e2353d50aec80d07c65f. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09drm/amdgpu: add S/G display parameterAlex Deucher
Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). Add a option to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. v2: fix typo Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-09Revert "drm/amd/display: disable S/G display on DCN 3.1.5"Alex Deucher
This reverts commit 3cc67fe1b3aa1ac4720e002f2aa2d08c9199a584. Some users have reported flickerng with S/G display. We've tried extensively to reproduce and debug the issue on a wide variety of platform configurations (DRAM bandwidth, etc.) and a variety of monitors, but so far have not been able to. We disabled S/G display on a number of platforms to address this but that leads to failure to pin framebuffers errors and blank displays when there is memory pressure or no displays at all on systems with limited carveout (e.g., Chromebooks). We have a parameter to disable this as a debugging option as a way for users to disable this, depending on their use case, and for us to help debug this further. Having this enabled seems like the lesser of to evils. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-23 06:58:40 +0000