summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-14drm/amdgpu: add RAP TA header fileWenhui Sheng
The RAP TA contains tests used to verify if RAP(Register Access Policy), or otherwise known as Security Policy is applied correctly by PSP BL&TOS. The RAP test is a measure to ensure that we reduce the avenue of complexity and mistakes when dealing with RAP in post-si execution, where debugging failures related to RAP is quite difficult and expensive. v2: add introduction for RAP TA Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com> Reviewed-by: Guchun Chen <Guchun.Chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: reconfigure spm golden settings on Navi1x after GFXOFF exit(v3)Tianci.Yin
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfigure the golden settings after GFXOFF exit. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: add interface amdgpu_gfx_init_spm_golden for Navi1xTianci.Yin
On Navi1x, the SPM golden settings are lost after GFXOFF enter/exit, so reconfiguration is needed. Make the configuration code as an interface for future use. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: add debugfs node to toggle ras error cnt harvestGuchun Chen
Before ras recovery is issued, user could operate this debugfs node to enable/disable the harvest of all RAS IPs' ras error count registers, which will help keep hardware's registers' status instead of cleaning up them. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amdgpu: bypass querying ras error count registersGuchun Chen
Once ras recovery is issued by ras sync flood interrupt or ras controller interrupt, add this guard to bypass or execute ras error count register harvest of all IPs. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: intel_pstate: Implement passive mode with HWP enabled
2020-08-14igc: Fix PTP initializationVinicius Costa Gomes
Right now, igc_ptp_reset() is called from igc_reset(), which is called from igc_probe() before igc_ptp_init() has a chance to run. It is detected as an attempt to use an spinlock without registering its key first. See log below. To avoid this problem, simplify the initialization: igc_ptp_init() is only called from igc_probe(), and igc_ptp_reset() is only called from igc_reset(). [ 2.736332] INFO: trying to register non-static key. [ 2.736902] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 2.737513] the code is fine but needs lockdep annotation. [ 2.737513] turning off the locking correctness validator. [ 2.737515] CPU: 8 PID: 239 Comm: systemd-udevd Tainted: G E 5.8.0-rc7+ #13 [ 2.737515] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 2.737516] Call Trace: [ 2.737521] dump_stack+0x78/0xa0 [ 2.737524] register_lock_class+0x6b1/0x6f0 [ 2.737526] ? lockdep_hardirqs_on_prepare+0xca/0x160 [ 2.739177] ? _raw_spin_unlock_irq+0x24/0x50 [ 2.739179] ? trace_hardirqs_on+0x1c/0xf0 [ 2.740820] __lock_acquire+0x56/0x1ff0 [ 2.740823] ? __schedule+0x30c/0x970 [ 2.740825] lock_acquire+0x97/0x3e0 [ 2.740830] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.740833] ? schedule_hrtimeout_range_clock+0xb7/0x120 [ 2.742507] _raw_spin_lock_irqsave+0x3a/0x50 [ 2.742512] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.742515] igc_ptp_reset+0x35/0xf0 [igc] [ 2.742519] igc_reset+0x96/0xd0 [igc] [ 2.744148] igc_probe+0x68f/0x7d0 [igc] [ 2.745796] local_pci_probe+0x3d/0x70 [ 2.745799] pci_device_probe+0xd1/0x190 [ 2.745802] really_probe+0x15a/0x3f0 [ 2.759936] driver_probe_device+0xe1/0x150 [ 2.759937] device_driver_attach+0xa8/0xb0 [ 2.761786] __driver_attach+0x89/0x150 [ 2.761786] ? device_driver_attach+0xb0/0xb0 [ 2.761787] ? device_driver_attach+0xb0/0xb0 [ 2.761788] bus_for_each_dev+0x66/0x90 [ 2.765012] bus_add_driver+0x12e/0x1f0 [ 2.765716] driver_register+0x8b/0xe0 [ 2.766418] ? 0xffffffffc0230000 [ 2.767119] do_one_initcall+0x5a/0x310 [ 2.767826] ? kmem_cache_alloc_trace+0xe9/0x200 [ 2.768528] do_init_module+0x5c/0x260 [ 2.769206] __do_sys_finit_module+0x93/0xe0 [ 2.770048] do_syscall_64+0x46/0xa0 [ 2.770716] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2.771396] RIP: 0033:0x7f83534589e0 [ 2.772073] Code: 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 2e 2e 2e 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 80 24 0d 00 f7 d8 64 89 01 48 [ 2.772074] RSP: 002b:00007ffd31d0ed18 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.774854] RAX: ffffffffffffffda RBX: 000055d52816aba0 RCX: 00007f83534589e0 [ 2.774855] RDX: 0000000000000000 RSI: 00007f83535b982f RDI: 0000000000000006 [ 2.774855] RBP: 00007ffd31d0ed60 R08: 0000000000000000 R09: 00007ffd31d0ed30 [ 2.774856] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.774856] R13: 0000000000020000 R14: 00007f83535b982f R15: 000055d527f5e120 Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-14dma-pool: fix coherent pool allocations for IOMMU mappingsChristoph Hellwig
When allocating coherent pool memory for an IOMMU mapping we don't care about the DMA mask. Move the guess for the initial GFP mask into the dma_direct_alloc_pages and pass dma_coherent_ok as a function pointer argument so that it doesn't get applied to the IOMMU case. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Amit Pundir <amit.pundir@linaro.org>
2020-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Some merge window fallout, some longer term fixes: 1) Handle headroom properly in lapbether and x25_asy drivers, from Xie He. 2) Fetch MAC address from correct r8152 device node, from Thierry Reding. 3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg, from Rouven Czerwinski. 4) Correct fdputs in socket layer, from Miaohe Lin. 5) Revert troublesome sockptr_t optimization, from Christoph Hellwig. 6) Fix TCP TFO key reading on big endian, from Jason Baron. 7) Missing CAP_NET_RAW check in nfc, from Qingyu Li. 8) Fix inet fastreuse optimization with tproxy sockets, from Tim Froidcoeur. 9) Fix 64-bit divide in new SFC driver, from Edward Cree. 10) Add a tracepoint for prandom_u32 so that we can more easily perform usage analysis. From Eric Dumazet. 11) Fix rwlock imbalance in AF_PACKET, from John Ogness" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) net: openvswitch: introduce common code for flushing flows af_packet: TPACKET_V3: fix fill status rwlock imbalance random32: add a tracepoint for prandom_u32() Revert "ipv4: tunnel: fix compilation on ARCH=um" net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus net: ethernet: stmmac: Disable hardware multicast filter net: stmmac: dwmac1000: provide multicast filter fallback ipv4: tunnel: fix compilation on ARCH=um vsock: fix potential null pointer dereference in vsock_poll() sfc: fix ef100 design-param checking net: initialize fastreuse on inet_inherit_port net: refactor bind_bucket fastreuse into helper net: phy: marvell10g: fix null pointer dereference net: Fix potential memory leak in proto_register() net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc() net/nfc/rawsock.c: add CAP_NET_RAW check. hinic: fix strncpy output truncated compile warnings drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check net/tls: Fix kmap usage ...
2020-08-13Merge branch 'i2c/for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - bus recovery can now be given a pinctrl handle and the I2C core will do all the steps to switch to/from GPIO which can save quite some boilerplate code from drivers - "fallthrough" conversion - driver updates, mostly ID additions * 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits) i2c: iproc: fix race between client unreg and isr i2c: eg20t: use generic power management i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume i2c: mediatek: Fix i2c_spec_values description i2c: mediatek: Add i2c compatible for MediaTek MT8192 dt-bindings: i2c: update bindings for MT8192 SoC i2c: mediatek: Add access to more than 8GB dram in i2c driver i2c: mediatek: Add apdma sync in i2c driver i2c: i801: Add support for Intel Tiger Lake PCH-H i2c: i801: Add support for Intel Emmitsburg PCH i2c: bcm2835: Replace HTTP links with HTTPS ones Documentation: i2c: dev: 'block process call' is supported i2c: at91: Move to generic GPIO bus recovery i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs i2c: core: add generic I2C GPIO recovery dt-bindings: i2c: add generic properties for GPIO bus recovery i2c: rcar: avoid race when unregistering slave i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c i2c: tegra: Fix runtime resume to re-init VI I2C i2c: tegra: Fix the error path in tegra_i2c_runtime_resume ...
2020-08-13Merge tag 's390-5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - Allow s390 debug feature to handle finally more than 256 CPU numbers, instead of truncating the most significant bits. - Improve THP splitting required by qemu processes by making use of walk_page_vma() instead of calling follow_page() for every single page within each vma. - Add missing ZCRYPT dependency to VFIO_AP to fix potential compile problems. - Remove not required select CLOCKSOURCE_VALIDATE_LAST_CYCLE again. - Set node distance to LOCAL_DISTANCE instead of 0, since e.g. libnuma translates a node distance of 0 to "no NUMA support available". - Couple of other minor fixes and improvements. * tag 's390-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/numa: move code to arch/s390/kernel s390/time: remove select CLOCKSOURCE_VALIDATE_LAST_CYCLE again s390/debug: debug feature version 3 s390/Kconfig: add missing ZCRYPT dependency to VFIO_AP s390/numa: set node distance to LOCAL_DISTANCE s390/pkey: remove redundant variable initialization s390/test_unwind: fix possible memleak in test_unwind() s390/gmap: improve THP splitting s390/atomic: circumvent gcc 10 build regression
2020-08-13drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panelLaurent Pinchart
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel, set the bus format to MEDIA_BUS_FMT_RGB666_1X18. Fixes: 725c9d40f3fe ("drm/panel: Add support for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812220244.24500-1-laurent.pinchart@ideasonboard.com
2020-08-13drm/xen-front: Pass dumb buffer data offset to the backendOleksandr Andrushchenko
While importing a dmabuf it is possible that the data of the buffer is put with offset which is indicated by the SGT offset. Respect the offset value and forward it to the backend. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/mcde: Enable the DSI link with displayLinus Walleij
The MCDE DSI link hardware which is modeled like a bridge in DRM, connected further to the panel bridge, creating a pipeline. We have been using the .pre_enable(), .enable(), .disable() and .post_disable() callbacks from the bridge to set this up in a chained manner: first the display controller goes online and then in successive order each bridge in the pipeline. Inside DRM it works like this: drm_atomic_helper_commit_tail() drm_atomic_helper_commit_modeset_enables() struct drm_crtc_helper_funcs .atomic_enable() struct drm_simple_display_pipe_funcs .enable() MCDE display enable call drm_atomic_bridge_chain_enable() struct drm_bridge_funcs .pre_enable() mcde_dsi_bridge_pre_enable() panel_bridge_pre_enable() struct drm_panel_funcs .prepare() struct drm_bridge_funcs .enable() mcde_dsi_bridge_enable() panel_bridge_enable() struct drm_panel_funcs .enable() A similar sequence is executed for disabling. Unfortunately this is not what the hardware needs: at a certain stage in the enablement of the display controller the DSI link needs to come up to support video mode, else something (like a FIFO flow) locks up the hardware and we never get picture. Fix this by simply leaving the pre|enable and post|disable callbacks unused, and establish two cross-calls from the display controller to bring up the DSI link at the right place in the display bring-up sequence and vice versa in the shutdown sequence. For command mode displays, it works just fine to also enable the display flow early. The only time we hold it back right now is in one-shot mode, on-demand display updates. When combined with the previous patch and some patches for the S6E63M0 display controller to support DSI mode, this gives working display on the Samsung GT-I8190 (Golden) phone. It has also been tested working on the Samsung GT-S7710 (Skomer) phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-4-linus.walleij@linaro.org
2020-08-13drm/mcde: Fix display pipeline restartLinus Walleij
To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-13drm/mcde: Support using DSI in LP modeLinus Walleij
It is possible to set a flag in the struct mipi_dsi_device so the panel is handled in low power (LP) mode. Some displays only support this mode and it is also good for testing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-2-linus.walleij@linaro.org
2020-08-13drm/mcde: Improve pixel fetcher FIFO depth settingLinus Walleij
The pixel fetcher FIFO depth was just hardcoded to 48 which works fine as long as the framebuffer is 32BPP and the DSI output is RGB888. We will need more elaborate handling for some buffer formats and displays, so start to improve this function by setting reasonable defaults for 32, 24 and 16 BPP framebuffers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-1-linus.walleij@linaro.org
2020-08-13drm/mcde: Fix display data flow controlLinus Walleij
Revamp the way that the flow of data to the display is defined. I realized that the hardware supports something like 5 different modes of flow: oneshot, command with TE IRQ, command with BTA (bus turn around) and TE IRQ, video with TE IRQ and video without TE IRQ instead synchronizing to the output of the MCDE DSI formatter. Like before the selection of the type of flow is done from the DSI driver when we attach it to the MCDE and we get to know what the display wants. The new video mode synchronization method from the MCDE DSI formatter is used on some upstream devices such as Golden. This is the new default for video mode: stateless panels do not as a rule generate TE IRQs. Another semantic change is that we stop sending a TE request before every command when sending data to a display in command mode: this should only be explicitly requested when using BTA, according to the vendor driver. This has been tested and works fine with the command mode displays I have. (All that are supported upstream.) Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-2-linus.walleij@linaro.org
2020-08-13drm/mcde: Rename flow functionLinus Walleij
The function mcde_display_send_one_frame() has a historical name that stems from being implemented when the driver only supported single frame updates. Rename it mcde_start_flow() so that it reflects the current usage. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-1-linus.walleij@linaro.org
2020-08-13drm/xen-front: Add YUYV to supported formatsOleksandr Andrushchenko
Add YUYV to supported formats, so the frontend can work with the formats used by cameras and other HW. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20200813062113.11030-4-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/xen-front: Fix misused IS_ERR_OR_NULL checksOleksandr Andrushchenko
The patch c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" from Apr 3, 2018, leads to the following static checker warning: drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create() warn: passing zero to 'ERR_CAST' drivers/gpu/drm/xen/xen_drm_front_gem.c 133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev, 134 size_t size) 135 { 136 struct xen_gem_object *xen_obj; 137 138 xen_obj = gem_create(dev, size); 139 if (IS_ERR_OR_NULL(xen_obj)) 140 return ERR_CAST(xen_obj); Fix this and the rest of misused places with IS_ERR_OR_NULL in the driver. Fixes: c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13xen/gntdev: Fix dmabuf import with non-zero sgt offsetOleksandr Andrushchenko
It is possible that the scatter-gather table during dmabuf import has non-zero offset of the data, but user-space doesn't expect that. Fix this by failing the import, so user-space doesn't access wrong data. Fixes: bf8dc55b1358 ("xen/gntdev: Implement dma-buf import functionality") Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-2-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/hisilicon: Fix build error of no type of module_initTian Tao
Add missing include to fix build error: hibmc_drm_drv.c:385:1: warning: data definition has no type or storage class [enabled by default] hibmc_drm_drv.c:385:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int] hibmc_drm_drv.c:385:1: warning: parameter names (without types) in function of ‘module_exit’ [-Werror=implicit-int] hibmc_drm_drv.c:385:292:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597289955-27381-1-git-send-email-tiantao6@hisilicon.com
2020-08-13mfd: syscon: Use a unique name with regmap_configSuman Anna
The DT node full name is currently being used in regmap_config which in turn is used to create the regmap debugfs directories. This name however is not guaranteed to be unique and the regmap debugfs registration can fail in the cases where the syscon nodes have the same unit-address but are present in different DT node hierarchies. Replace this logic using the syscon reg resource address instead (inspired from logic used while creating platform devices) to ensure a unique name is given for each syscon. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: dln2: Run event handler loop under spinlockAndy Shevchenko
The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] <IRQ> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc01657b49 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: madera: Improve handling of regulator unbindingCharles Keepax
The current unbinding process for Madera has some issues. The trouble is runtime PM is disabled as the first step of the process, but some of the drivers release IRQs causing regmap IRQ to issue a runtime get which fails. To allow runtime PM to remain enabled during mfd_remove_devices, the DCVDD regulator must remain available. In the case of external DCVDD's this is simple, the regulator can simply be disabled/put after the call to mfd_remove_devices. However, in the case of an internally supplied DCVDD the regulator needs to be released after the other MFD children depending on it. Use the new MFD mfd_remove_devices_late functionality to split the DCVDD regulator off from the other drivers. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: mfd-core: Add mechanism for removal of a subset of childrenCharles Keepax
Currently, the only way to remove MFD children is with a call to mfd_remove_devices, which will remove all the children. Under some circumstances it is useful to remove only a subset of the child devices. For example if some additional clean up is required between removal of certain child devices. To accomplish this a level field is added to mfd_cell, the normal mfd_remove_devices is modified to not remove devices that are set to a higher level and a corresponding mfd_remove_devices_late function is added to remove those children. See further discussion at: https://lore.kernel.org/lkml/20200616075834.GF2608702@dell/ Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: intel_soc_pmic_mrfld: Simplify the return expression of ↵Xu Wang
intel_scu_ipc_dev_iowrite8() Simplify the return expression. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: max14577: Remove redundant initialization of variable current_bitsColin Ian King
The variable current_bits is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: rn5t618: Fix caching of battery related registersAndreas Kemnade
Battery status changes dynamically, so the corresponding registers need to be considered volatile. Affected registers are: - fuel gauge - battery status - battery interrupt Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: rn5t618: Make restart handler atomic safeAndreas Kemnade
The restart handler is executed during the shutdown phase which is atomic/irq-less. The i2c framework supports atomic transfers since commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") to address this use case. Using i2c regmap in that situation is not allowed: [ 165.177465] [ BUG: Invalid wait context ] [ 165.181479] 5.8.0-rc3-00003-g0e9088558027-dirty #11 Not tainted [ 165.187400] ----------------------------- [ 165.191410] systemd-shutdow/1 is trying to lock: [ 165.196030] d85b4438 (rn5t618:170:(&rn5t618_regmap_config)->lock){+.+.}-{3:3}, at: regmap_update_bits_base+0x30/0x70 [ 165.206573] other info that might help us debug this: [ 165.211625] context-{4:4} [ 165.214248] 2 locks held by systemd-shutdow/1: [ 165.218691] #0: c131c47c (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x204 [ 165.227405] #1: c131efb4 (rcu_read_lock){....}-{1:2}, at: __atomic_notifier_call_chain+0x0/0x118 [ 165.236288] stack backtrace: [ 165.239174] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.8.0-rc3-00003-g0e9088558027-dirty #11 [ 165.248220] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 165.254330] [<c0112110>] (unwind_backtrace) from [<c010bfa0>] (show_stack+0x10/0x14) [ 165.262084] [<c010bfa0>] (show_stack) from [<c058093c>] (dump_stack+0xe8/0x120) [ 165.269407] [<c058093c>] (dump_stack) from [<c01835a4>] (__lock_acquire+0x81c/0x2ca0) [ 165.277246] [<c01835a4>] (__lock_acquire) from [<c0186344>] (lock_acquire+0xe4/0x490) [ 165.285090] [<c0186344>] (lock_acquire) from [<c0c98638>] (__mutex_lock+0x74/0x954) [ 165.292756] [<c0c98638>] (__mutex_lock) from [<c0c98f34>] (mutex_lock_nested+0x1c/0x24) [ 165.300769] [<c0c98f34>] (mutex_lock_nested) from [<c07593ec>] (regmap_update_bits_base+0x30/0x70) [ 165.309741] [<c07593ec>] (regmap_update_bits_base) from [<c076b838>] (rn5t618_trigger_poweroff_sequence+0x34/0x64) [ 165.320097] [<c076b838>] (rn5t618_trigger_poweroff_sequence) from [<c076b874>] (rn5t618_restart+0xc/0x2c) [ 165.329669] [<c076b874>] (rn5t618_restart) from [<c01514f8>] (notifier_call_chain+0x48/0x80) [ 165.338113] [<c01514f8>] (notifier_call_chain) from [<c01516a8>] (__atomic_notifier_call_chain+0x70/0x118) [ 165.347770] [<c01516a8>] (__atomic_notifier_call_chain) from [<c0151768>] (atomic_notifier_call_chain+0x18/0x20) [ 165.357949] [<c0151768>] (atomic_notifier_call_chain) from [<c010a828>] (machine_restart+0x68/0x80) [ 165.367001] [<c010a828>] (machine_restart) from [<c0153224>] (__do_sys_reboot+0x11c/0x204) [ 165.375272] [<c0153224>] (__do_sys_reboot) from [<c0100080>] (ret_fast_syscall+0x0/0x28) [ 165.383364] Exception stack(0xd80a5fa8 to 0xd80a5ff0) [ 165.388420] 5fa0: 00406948 00000000 fee1dead 28121969 01234567 73299b00 [ 165.396602] 5fc0: 00406948 00000000 00000000 00000058 be91abc8 00000000 be91ab60 004056f8 [ 165.404781] 5fe0: 00000058 be91aabc b6ed4d45 b6e56746 Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: kempld-core: Fix 'assignment of read-only location' errorStephen Rothwell
drivers/mfd/kempld-core.c: In function 'kempld_register_cells_generic': drivers/mfd/kempld-core.c:105:13: error: assignment of read-only location 'devs[i++]' 105 | devs[i++] = kempld_devs[KEMPLD_I2C]; | ^ drivers/mfd/kempld-core.c:108:13: error: assignment of read-only location 'devs[i++]' 108 | devs[i++] = kempld_devs[KEMPLD_WDT]; | ^ drivers/mfd/kempld-core.c:111:13: error: assignment of read-only location 'devs[i++]' 111 | devs[i++] = kempld_devs[KEMPLD_GPIO]; | ^ drivers/mfd/kempld-core.c:114:13: error: assignment of read-only location 'devs[i++]' 114 | devs[i++] = kempld_devs[KEMPLD_UART]; | ^ Fixes: e49aa9a9bd22 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: axp20x: Allow the AXP803 to be probed by I2CFrank Lee
The AXP803 can be used both using the RSB proprietary bus, or a more traditional I2C bus. Let's add that possibility. Signed-off-by: Frank Lee <frank@allwinnertech.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: da9063: Add support for latest DA silicon revisionAdam Thomson
This update adds new regmap tables to support the latest DA silicon which will automatically be selected based on the chip and variant information read from the device. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: da9063: Fix revision handling to correctly select reg tablesAdam Thomson
The current implementation performs checking in the i2c_probe() function of the variant_code but does this immediately after the containing struct has been initialised as all zero. This means the check for variant code will always default to using the BB tables and will never select AD. The variant code is subsequently set by device_init() and later used by the RTC so really it's a little fortunate this mismatch works. This update adds raw I2C read access functionality to read the chip and variant/revision information (common to all revisions) so that it can subsequently correctly choose the proper regmap tables for real initialisation. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: motorola-cpcap: Disable interrupt for suspendTony Lindgren
Otherwise we get spammed with errors on resume after rtcwake: cpcap-core spi0.0: Failed to read IRQ status: -108 Note that rtcwake is still capable of waking up the system with this patch. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: smsc-ece1099: Remove driverMichael Walle
This MFD driver has no user. The keypad driver of this device never made it into the kernel. Therefore, this driver is useless. Remove it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-13mfd: core: Make a best effort attempt to match devices with the correct of_nodesLee Jones
Currently, when a child platform device (sometimes referred to as a sub-device) is registered via the Multi-Functional Device (MFD) API, the framework attempts to match the newly registered platform device with its associated Device Tree (OF) node. Until now, the device has been allocated the first node found with an identical OF compatible string. Unfortunately, if there are, say for example '3' devices which are to be handled by the same driver and therefore have the same compatible string, each of them will be allocated a pointer to the *first* node. An example Device Tree entry might look like this: mfd_of_test { compatible = "mfd,of-test-parent"; #address-cells = <0x02>; #size-cells = <0x02>; child@aaaaaaaaaaaaaaaa { compatible = "mfd,of-test-child"; reg = <0xaaaaaaaa 0xaaaaaaaa 0 0x11>, <0xbbbbbbbb 0xbbbbbbbb 0 0x22>; }; child@cccccccc { compatible = "mfd,of-test-child"; reg = <0x00000000 0xcccccccc 0 0x33>; }; child@dddddddd00000000 { compatible = "mfd,of-test-child"; reg = <0xdddddddd 0x00000000 0 0x44>; }; }; When used with example sub-device registration like this: static const struct mfd_cell mfd_of_test_cell[] = { OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 0, "mfd,of-test-child"), OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child"), OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child") }; ... the current implementation will result in all devices being allocated the first OF node found containing a matching compatible string: [0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0 [0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@aaaaaaaaaaaaaaaa [0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1 [0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa [0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2 [0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@aaaaaaaaaaaaaaaa After this patch each device will be allocated a unique OF node: [0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0 [0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@aaaaaaaaaaaaaaaa [0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1 [0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@cccccccc [0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2 [0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@dddddddd00000000 Which is fine if all OF nodes are identical. However if we wish to apply an attribute to particular device, we really need to ensure the correct OF node will be associated with the device containing the correct address. We accomplish this by matching the device's address expressed in DT with one provided during sub-device registration. Like this: static const struct mfd_cell mfd_of_test_cell[] = { OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child", 0xdddddddd00000000), OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child", 0xaaaaaaaaaaaaaaaa), OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 3, "mfd,of-test-child", 0x00000000cccccccc) }; This will ensure a specific device (designated here using the platform_ids; 1, 2 and 3) is matched with a particular OF node: [0.712511] mfd-of-test-child mfd-of-test-child.0: Probing platform device: 0 [0.712710] mfd-of-test-child mfd-of-test-child.0: Using OF node: child@dddddddd00000000 [0.713033] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1 [0.713381] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa [0.713691] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2 [0.713889] mfd-of-test-child mfd-of-test-child.2: Using OF node: child@cccccccc This implementation is still not infallible, hence the mention of "best effort" in the commit subject. Since we have not *insisted* on the existence of 'reg' properties (in some scenarios they just do not make sense) and no device currently uses the new 'of_reg' attribute, we have to make an on-the-fly judgement call whether to associate the OF node anyway. Which we do in cases where parent drivers haven't specified a particular OF node to match to. So there is a *slight* possibility of the following result (note: the implementation here is convoluted, but it shows you one means by which this process can still break): /* * First entry will match to the first OF node with matching compatible * Second will fail, since the first took its OF node and is no longer available * Third will succeed */ static const struct mfd_cell mfd_of_test_cell[] = { OF_MFD_CELL("mfd-of-test-child", NULL, NULL, 0, 1, "mfd,of-test-child"), OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 2, "mfd,of-test-child", 0xaaaaaaaaaaaaaaaa), OF_MFD_CELL_REG("mfd-of-test-child", NULL, NULL, 0, 3, "mfd,of-test-child", 0x00000000cccccccc) }; The result: [0.753869] mfd-of-test-parent mfd_of_test: Registering 3 devices [0.756597] mfd-of-test-child: Failed to locate of_node [id: 2] [0.759999] mfd-of-test-child mfd-of-test-child.1: Probing platform device: 1 [0.760314] mfd-of-test-child mfd-of-test-child.1: Using OF node: child@aaaaaaaaaaaaaaaa [0.760908] mfd-of-test-child mfd-of-test-child.2: Probing platform device: 2 [0.761183] mfd-of-test-child mfd-of-test-child.2: No OF node associated with this device [0.761621] mfd-of-test-child mfd-of-test-child.3: Probing platform device: 3 [0.761899] mfd-of-test-child mfd-of-test-child.3: Using OF node: child@cccccccc We could code around this with some pre-parsing semantics, but the added complexity required to cover each and every corner-case is not justified. Merely patching the current failing (via this patch) is already working with some pretty small corner-cases. Other issues should be patched in the parent drivers which can be achieved simply by implementing OF_MFD_CELL_REG(). Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-12Merge tag 'rtc-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Not much this cycle - mostly non urgent driver fixes: - ds1374: use watchdog core - pcf2127: add alarm and pcf2129 support" * tag 'rtc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: fix alarm handling rtc: pcf2127: add alarm support rtc: pcf2127: add pca2129 device id rtc: max77686: Fix wake-ups for max77620 rtc: ds1307: provide an indication that the watchdog has fired rtc: ds1374: remove unused define rtc: ds1374: fix RTC_DRV_DS1374_WDT dependencies rtc: cleanup obsolete comment about struct rtc_class_ops rtc: pl031: fix set_alarm by adding back call to alarm_irq_enable rtc: ds1374: wdt: Use watchdog core for watchdog part rtc: Replace HTTP links with HTTPS ones rtc: goldfish: Enable interrupt in set_alarm() when necessary rtc: max77686: Do not allow interrupt to fire before system resume rtc: imxdi: fix trivial typos rtc: cpcap: fix range
2020-08-12net: ethernet: stmmac: Disable hardware multicast filterJonathan McDowell
The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI. Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-12net: stmmac: dwmac1000: provide multicast filter fallbackJonathan McDowell
If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-12drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridgeMarek Vasut
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived from tc358764 driver and panel-raspberrypi-touchscreen. This driver is meant to replace the panel-raspberrypi-touchscreen too, as the bridge connection can be described in DT too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
2020-08-12i2c: iproc: fix race between client unreg and isrDhananjay Phadke
When i2c client unregisters, synchronize irq before setting iproc_i2c->slave to NULL. (1) disable_irq() (2) Mask event enable bits in control reg (3) Erase slave address (avoid further writes to rx fifo) (4) Flush tx and rx FIFOs (5) Clear pending event (interrupt) bits in status reg (6) enable_irq() (7) Set client pointer to NULL Unable to handle kernel NULL pointer dereference at virtual address 0000000000000318 [ 371.020421] pc : bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.025098] lr : __handle_irq_event_percpu+0x6c/0x170 [ 371.030309] sp : ffff800010003e40 [ 371.033727] x29: ffff800010003e40 x28: 0000000000000060 [ 371.039206] x27: ffff800010ca9de0 x26: ffff800010f895df [ 371.044686] x25: ffff800010f18888 x24: ffff0008f7ff3600 [ 371.050165] x23: 0000000000000003 x22: 0000000001600000 [ 371.055645] x21: ffff800010f18888 x20: 0000000001600000 [ 371.061124] x19: ffff0008f726f080 x18: 0000000000000000 [ 371.066603] x17: 0000000000000000 x16: 0000000000000000 [ 371.072082] x15: 0000000000000000 x14: 0000000000000000 [ 371.077561] x13: 0000000000000000 x12: 0000000000000001 [ 371.083040] x11: 0000000000000000 x10: 0000000000000040 [ 371.088519] x9 : ffff800010f317c8 x8 : ffff800010f317c0 [ 371.093999] x7 : ffff0008f805b3b0 x6 : 0000000000000000 [ 371.099478] x5 : ffff0008f7ff36a4 x4 : ffff8008ee43d000 [ 371.104957] x3 : 0000000000000000 x2 : ffff8000107d64c0 [ 371.110436] x1 : 00000000c00000af x0 : 0000000000000000 [ 371.115916] Call trace: [ 371.118439] bcm_iproc_i2c_isr+0x530/0x11f0 [ 371.122754] __handle_irq_event_percpu+0x6c/0x170 [ 371.127606] handle_irq_event_percpu+0x34/0x88 [ 371.132189] handle_irq_event+0x40/0x120 [ 371.136234] handle_fasteoi_irq+0xcc/0x1a0 [ 371.140459] generic_handle_irq+0x24/0x38 [ 371.144594] __handle_domain_irq+0x60/0xb8 [ 371.148820] gic_handle_irq+0xc0/0x158 [ 371.152687] el1_irq+0xb8/0x140 [ 371.155927] arch_cpu_idle+0x10/0x18 [ 371.159615] do_idle+0x204/0x290 [ 371.162943] cpu_startup_entry+0x24/0x60 [ 371.166990] rest_init+0xb0/0xbc [ 371.170322] arch_call_rest_init+0xc/0x14 [ 371.174458] start_kernel+0x404/0x430 Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-08-12sfc: fix ef100 design-param checkingEdward Cree
The handling of the RXQ/TXQ size granularity design-params had two problems: it had a 64-bit divide that didn't build on 32-bit platforms, and it could divide by zero if the NIC supplied 0 as the value of the design-param. Fix both by checking for 0 and for a granularity bigger than our min-size; if the granularity <= EFX_MIN_DMAQ_SIZE then it fits in 32 bits, so we can cast it to u32 for the divide. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-12Merge branch 'parisc-5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - Oscar Carter contributed a patch which fixes parisc's usage of dereference_function_descriptor() and thus will allow using the -Wcast-function-type compiler option in the top-level Makefile - Sven Schnelle fixed a bug in the SBA code to prevent crashes during kexec - John David Anglin provided implementations for __smp_store_release() and __smp_load_acquire barriers() which avoids using the sync assembler instruction and thus speeds up barrier paths - Some whitespace cleanups in parisc's atomic.h header file * 'parisc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Implement __smp_store_release and __smp_load_acquire barriers parisc: mask out enable and reserved bits from sba imask parisc: Whitespace cleanups in atomic.h parisc/kernel/ftrace: Remove function callback casts sections.h: dereference_function_descriptor() returns void pointer
2020-08-12Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "Here's some more updates that missed the last pull request because I happened to tag the tree at an earlier point in the history of clk-next. I must have fat fingered it and checked out an older version of clk-next on this second computer I'm using. This time it actually includes more code for Qualcomm SoCs, the AT91 major updates, and some Rockchip SoC clk driver updates as well. I've corrected this flow so this shouldn't happen again" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (83 commits) clk: bcm2835: Do not use prediv with bcm2711's PLLs clk: drop unused function __clk_get_flags clk: hsdk: Fix bad dependency on IOMEM dt-bindings: clock: Fix YAML schemas for LPASS clocks on SC7180 clk: mmp: avoid missing prototype warning clk: sparx5: Add Sparx5 SoC DPLL clock driver dt-bindings: clock: sparx5: Add bindings include file clk: qoriq: add LS1021A core pll mux options clk: clk-atlas6: fix return value check in atlas6_clk_init() clk: tegra: pll: Improve PLLM enable-state detection clk: X1000: Add support for calculat REFCLK of USB PHY. clk: JZ4780: Reformat the code to align it. clk: JZ4780: Add functions for enable and disable USB PHY. clk: Ingenic: Add RTC related clocks for Ingenic SoCs. dt-bindings: clock: Add tabs to align code. dt-bindings: clock: Add RTC related clocks for Ingenic SoCs. clk: davinci: Use fallthrough pseudo-keyword clk: imx: Use fallthrough pseudo-keyword clk: qcom: gcc-sdm660: Fix up gcc_mss_mnoc_bimc_axi_clk clk: qcom: gcc-sdm660: Add missing modem reset ...
2020-08-12Merge tag 'linux-watchdog-5.9-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - f71808e_wdt imporvements - dw_wdt improvements - mlx-wdt: support new watchdog type with longer timeout period - fallthrough pseudo-keyword replacements - overall small fixes and improvements * tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: rti-wdt: balance pm runtime enable calls watchdog: rti-wdt: attach to running watchdog during probe watchdog: add support for adjusting last known HW keepalive time watchdog: use __watchdog_ping in startup watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot' watchdog: pcwd_usb: remove needless check before usb_free_coherent() watchdog: Replace HTTP links with HTTPS ones dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support watchdog: initialize device before misc_register watchdog: booke_wdt: Add common nowayout parameter driver watchdog: scx200_wdt: Use fallthrough pseudo-keyword watchdog: Use fallthrough pseudo-keyword watchdog: f71808e_wdt: do stricter parameter validation watchdog: f71808e_wdt: clear watchdog timeout occurred flag watchdog: f71808e_wdt: remove use of wrong watchdog_info option watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options docs: watchdog: codify ident.options as superset of possible status flags dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150 dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML watchdog: dw_wdt: Add DebugFS files ...
2020-08-12Merge tag 'vfio-v5.9-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - Inclusive naming updates (Alex Williamson) - Intel X550 INTx quirk (Alex Williamson) - Error path resched between unmaps (Xiang Zheng) - SPAPR IOMMU pin_user_pages() conversion (John Hubbard) - Trivial mutex simplification (Alex Williamson) - QAT device denylist (Giovanni Cabiddu) - type1 IOMMU ioctl refactor (Liu Yi L) * tag 'vfio-v5.9-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Refactor vfio_iommu_type1_ioctl() vfio/pci: Add QAT devices to denylist vfio/pci: Add device denylist PCI: Add Intel QuickAssist device IDs vfio/pci: Hold igate across releasing eventfd contexts vfio/spapr_tce: convert get_user_pages() --> pin_user_pages() vfio/type1: Add conditional rescheduling after iommu map failed vfio/pci: Add Intel X550 to hidden INTx devices vfio: Cleanup allowed driver naming
2020-08-12Merge tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This has a few vmwgfx regression fixes we hit from the merge window (one in TTM), it also has a bunch of amdgpu fixes along with a scattering everywhere else. core: - Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - Remove null check for kfree in drm_dev_release. - Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition. - re-added docs for drm_gem_flink_ioctl() - add orientation quirk for ASUS T103HAF ttm: - ttm: fix page-offset calculation within TTM - revert patch causing vmwgfx regressions fbcon: - Fix a fbcon OOB read in fbdev, found by syzbot. vga: - Mark vga_tryget static as it's not used elsewhere. amdgpu: - Re-add spelling typo fix - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes - SMU i2c fix - Power fixes vmwgfx: - regression fixes for modesetting crashes - misc fixes xlnx: - Small fixes to xlnx. omap: - Fix mode initialization in omap_connector_mode_valid(). - force runtime PM suspend on system suspend tidss: - fix modeset init for DPI panels" * tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits) drm/ttm: revert "drm/ttm: make TT creation purely optional v3" drm/vmwgfx: fix spelling mistake "Cant" -> "Can't" drm/vmwgfx: fix spelling mistake "Cound" -> "Could" drm/vmwgfx/ldu: Use drm_mode_config_reset drm/vmwgfx/sou: Use drm_mode_config_reset drm/vmwgfx/stdu: Use drm_mode_config_reset drm/vmwgfx: Fix two list_for_each loop exit tests drm/vmwgfx: Use correct vmw_legacy_display_unit pointer drm/vmwgfx: Use struct_size() helper drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3) drm/amd/powerplay: update swSMU VCN/JPEG PG logics drm/amdgpu: use mode1 reset by default for sienna_cichlid drm/amdgpu/smu: rework i2c adpater registration drm/amd/display: Display goes blank after inst drm/amd/display: Change null plane state swizzle mode to 4kb_s drm/amd/display: Use helper function to check for HDMI signal drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink drm/amd/display: Fix logger context drm/amd/display: populate new dml variable ...
generated by cgit (git 2.34.1) at 2025-09-18 05:20:13 +0000