| Age | Commit message (Collapse) | Author |
|---|
|
Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.
Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.
Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Fix a recent IRQ affinities regression, add in a missing debugfs
printout that helps the debugging of IRQ affinity logic bugs, and fix
a memory leak"
* tag 'irq-urgent-2020-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/debugfs: Add missing irqchip flags
genirq/affinity: Make affinity setting if activated opt-in
irqdomain/treewide: Free firmware node after domain removal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux
Pull unicore32 removal from Mike Rapoport:
"Remove unicore32 support.
The unicore32 port do not seem maintained for a long time now, there
is no upstream toolchain that can create unicore32 binaries and all
the links to prebuilt toolchains for unicore32 are dead. Even
compilers that were available are not supported by the kernel anymore.
Guenter Roeck says:
"I have stopped building unicore32 images since v4.19 since there is
no available compiler that is still supported by the kernel. I am
surprised that support for it has not been removed from the kernel"
However, it's worth pointing out two things:
- Guan Xuetao is still listed as maintainer and asked for the port to
be kept around the last time Arnd suggested removing it two years
ago. He promised that there would be compiler sources (presumably
llvm), but has not made those available since.
- https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both
released in 2016, with patches dated early 2019. These patches
mainly restore a syscall ABI that was never part of mainline Linux
but apparently used in production. qemu-2.8 removed support for
that ABI and newer kernels (4.19+) can no longer be built with the
old toolchain, so apparently there will not be any future updates
to that git tree"
* tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux:
MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry
rtc: remove fb-puv3 driver
video: fbdev: remove fb-puv3 driver
pwm: remove pwm-puv3 driver
input: i8042: remove support for 8042-unicore32io
i2c/buses: remove i2c-puv3 driver
cpufreq: remove unicore32 driver
arch: remove unicore32 port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for function error injection.
- Add support for custom exception handlers, as required by
BPF_PROBE_MEM.
- Add support for BPF_PROBE_MEM.
- Add trace events for idle enter / exit for the s390 specific idle
implementation.
- Remove unused zcore memmmap device.
- Remove unused "raw view" from s390 debug feature.
- AP bus + zcrypt device driver code refactoring.
- Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver.
- Expose only minimal interface to walk physmem for mm/memblock. This
is a common code change and it has been agreed on with Mike Rapoport
and Andrew Morton that this can go upstream via the s390 tree.
- Rework of the s390 vmem/vmmemap code to allow for future memory hot
remove.
- Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10
allocations again, instead of only order-8 allocations.
- Various small improvements and fixes.
* tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/vmemmap: coding style updates
s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections
s390/vmemmap: remember unused sub-pmd ranges
s390/vmemmap: fallback to PTEs if mapping large PMD fails
s390/vmem: cleanup empty page tables
s390/vmemmap: take the vmem_mutex when populating/freeing
s390/vmemmap: cleanup when vmemmap_populate() fails
s390/vmemmap: extend modify_pagetable() to handle vmemmap
s390/vmem: consolidate vmem_add_range() and vmem_remove_range()
s390/vmem: rename vmem_add_mem() to vmem_add_range()
s390: enable HAVE_FUNCTION_ERROR_INJECTION
s390/pci: clarify comment in s390_mmio_read/write
s390/time: improve comparison for tod steering
s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE
s390/time: use CLOCKSOURCE_MASK
s390/bpf: implement BPF_PROBE_MEM
s390/kernel: expand exception table logic to allow new handling options
s390/kernel: unify EX_TABLE* implementations
s390/mm: allow order 10 allocations
s390/mm: avoid trimming to MAX_ORDER
...
|
|
The function __clk_get_flags has not been used since the April 2019
commit a348f05361c9 ("ARM: omap2+: hwmod: drop CLK_IS_BASIC
flag usage"). Other uses were removed in June 2015, eg by
commit 98d8a60eccee ("clk: Convert __clk_get_flags() to
clk_hw_get_flags()"), which shows how clk_hw_get_flags can easily
be used instead.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1596272022-14173-1-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
CONFIG_IOMEM does not exist. The correct symbol to depend on is
CONFIG_HAS_IOMEM.
Fixes: 1e7468bd9d30a21e ("clk: Specify IOMEM dependency for HSDK pll driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200803084835.21838-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Need to merge this up to get the IOMEM dependency patch on top that is
broken and fixed in the next commit.
* clk-fixes:
clk: Specify IOMEM dependency for HSDK pll driver
clk: AST2600: Add mux for EMMC clock
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
|
|
Now that the corresponding feature bit has been renamed,
rename the quirk too - it's about special ways to
do DMA, not necessarily about the IOMMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rename the bit to match latest virtio spec.
Add a compat macro to avoid breaking existing userspace.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Richard Weinberger.
* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: properly check all write ioctls for permissions
|
|
Pending commit in -next "devres: handle zero size in devm_kmalloc()"
triggers a boot regression due to the ARS implementation expecting NULL
from a zero-sized allocation. Avoid the zero-sized allocation by
skipping ARS, otherwise crashes with the following signature when
de-referencing ZERO_SIZE_PTR.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:__acpi_nfit_scrub+0x28a/0x350 [nfit]
[..]
Call Trace:
? acpi_nfit_query_poison+0x6a/0x180 [nfit]
acpi_nfit_scrub+0x36/0xb0 [nfit]
process_one_work+0x23c/0x580
worker_thread+0x50/0x3b0
Otherwise the implementation correctly aborts when NULL is returned from
devm_kzalloc() in ars_status_alloc().
Link: https://lore.kernel.org/r/159624590643.3037264.14157533719042907758.stgit@dwillia2-desk3.amr.corp.intel.com
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
|
|
The WARN_*() macros are intended to catch impossible situations
from the SW point of view. They gave a little in case HW<->SW interface
is out-of-sync.
Such out-of-sync scenario can be due to SW errors that are not part
of this flow or because some HW errors, where dump stack won't help
either.
This specific WARN_ON() is useless because mlx5_core code is prepared
to handle such situations and will unfold everything correctly while
providing enough information to the users to understand why FS is not
working.
WARNING: CPU: 0 PID: 3222 at drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 3222 Comm: syz-executor861 Not tainted 5.5.0-rc6+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack linux/lib/dump_stack.c:77 [inline]
dump_stack+0x94/0xce linux/lib/dump_stack.c:118
panic+0x234/0x56f linux/kernel/panic.c:221
__warn+0x1cc/0x1e1 linux/kernel/panic.c:582
report_bug+0x200/0x310 linux/lib/bug.c:195
fixup_bug.part.11+0x32/0x80 linux/arch/x86/kernel/traps.c:174
fixup_bug linux/arch/x86/kernel/traps.c:273 [inline]
do_error_trap+0xd3/0x100 linux/arch/x86/kernel/traps.c:267
do_invalid_op+0x31/0x40 linux/arch/x86/kernel/traps.c:286
invalid_op+0x1e/0x30 linux/arch/x86/entry/entry_64.S:1027
RIP: 0010:connect_fts_in_prio.isra.20+0x1dd/0x260
linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825
Code: 00 00 48 c7 c2 60 8c 31 84 48 c7 c6 00 81 31 84 48 8b 38 e8 3c a8
cb ff 41 83 fd 01 8b 04 24 0f 8e 29 ff ff ff e8 83 7b bc fe <0f> 0b 8b
04 24 e9 1a ff ff ff 89 04 24 e8 c1 20 e0 fe 8b 04 24 eb
RSP: 0018:ffffc90004bb7858 EFLAGS: 00010293
RAX: ffff88805de98e80 RBX: 0000000000000c96 RCX: ffffffff827a853d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: fffff52000976efa
RBP: 0000000000000007 R08: ffffed100da060e3 R09: ffffed100da060e3
R10: 0000000000000001 R11: ffffed100da060e2 R12: dffffc0000000000
R13: 0000000000000002 R14: ffff8880683a1a10 R15: ffffed100d07bc1c
connect_prev_fts linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:844 [inline]
connect_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:975 [inline]
__mlx5_create_flow_table+0x8f8/0x1710 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1064
mlx5_create_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1094 [inline]
mlx5_create_auto_grouped_flow_table+0xe1/0x210 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1136
_get_prio linux/drivers/infiniband/hw/mlx5/main.c:3286 [inline]
get_flow_table+0x2ea/0x760 linux/drivers/infiniband/hw/mlx5/main.c:3376
mlx5_ib_create_flow+0x331/0x11c0 linux/drivers/infiniband/hw/mlx5/main.c:3896
ib_uverbs_ex_create_flow+0x13e8/0x1b40 linux/drivers/infiniband/core/uverbs_cmd.c:3311
ib_uverbs_write+0xaa5/0xdf0 linux/drivers/infiniband/core/uverbs_main.c:769
__vfs_write+0x7c/0x100 linux/fs/read_write.c:494
vfs_write+0x168/0x4a0 linux/fs/read_write.c:558
ksys_write+0xc8/0x200 linux/fs/read_write.c:611
do_syscall_64+0x9c/0x390 linux/arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a059
Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcc17564c98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fcc17564ca0 RCX: 000000000045a059
RDX: 0000000000000030 RSI: 00000000200003c0 RDI: 0000000000000005
RBP: 0000000000000007 R08: 0000000000000002 R09: 0000000000003131
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006e636c
R13: 0000000000000000 R14: 00000000006e6360 R15: 00007ffdcbdaf6a0
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: disabled
Rebooting in 1 seconds..
Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables")
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
Allocate nic_info dynamically - n_entries is not constant.
Attach the tunnel offload info only to the uplink representor.
We expect the "main" netdev to be unregistered in switchdev
mode, and there to be only one uplink representor.
Drop the udp_tunnel_drop_rx_info() call, it was not there until
commit b3c2ed21c0bd ("net/mlx5e: Fix VXLAN configuration restore after function reload")
so the device doesn't need it, and core should handle reloads and
reset just fine.
v2:
- don't drop the ndos on reprs, and register info on uplink repr.
v4:
- Move netdev tunnel structure handling to en_main.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The DR TX state machine supports the following order:
modify header, push vlan and encapsulation.
Instead fs_dr would pass:
push vlan, modify header and encapsulation.
The above caused the rule creation to fail on invalid action
sequence provided error.
Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently PF and VF representor netdevice carrier is always controlled
by controlling the representor netdevice device state as up/down.
Representor netdevice state change undergoes one or more txq/rxq
destroy/create commands to firmware, skb and its rx buffer allocation,
health reporters creation and more.
Due to this limitation users do not have the ability to just change
the carrier of the non uplink representors without modifying the
device state.
In one use case when the eswitch physical port carrier is down/up,
user needs to update the VF link state to same as physical port
carrier.
Example of updating VF representor carrier state:
$ ip link set enp0s8f0npf0vf0 carrier off
$ ip link set enp0s8f0npf0vf0 carrier on
This enhancement results into VF link state change which is
represented by the VF representor netdevice carrier.
This enables users to modify the representor carrier without modifying
the representor netdevice state.
A simple test is run using [1] to calculate the time difference between
updating carrier vs updating device state (to update just the carrier)
with one VF to simulate 255 VFs.
Time taken to update the carrier using device up/down:
$ time ./calculate.sh dev enp0s8f0npf0vf0
real 0m30.913s
user 0m0.200s
sys 0m11.168s
Time taken to update just the carrier using carrier iproute2 command:
$ time ./calculate.sh carrier enp0s8f0npf0vf0
real 0m2.142s
user 0m0.160s
sys 0m2.021s
Test shows that its better to use carrier on/off user interface to notify
link up/down event to VF compare to device up/down interface, because
carrier user interface delivers the same event 15 times faster.
[1] https://github.com/paravmellanox/myscripts/blob/master/calculate_carrier_time.sh
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Pull tpm updates from Jarkko Sakkinen:
"An issue was fixed with the TPM space buffer size. The buffer is used
to store in-TPM objects while swapped out of the TPM for a /dev/tpmrm0
session. The code incorrectly used PAGE_SIZE, which obviously can
vary. With these changes the buffer has a fixed size of 16 kB.
In addition, this contains support for acquiring TPM even log from
TPM2 ACPI table. This method is used by QEMU in particular"
* tag 'tpmdd-next-v5.9' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Add support for event log pointer found in TPM2 ACPI table
acpi: Extend TPM2 ACPI table with missing log fields
tpm: Unify the mismatching TPM space buffer sizes
tpm: Require that all digests are present in TCG_PCR_EVENT2 structures
|
|
CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the
same via sysfs.
But there are no precautions to prevent adding a device below a
controller that's being removed. Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down. E.g. it is then impossible to quiesce
the device's interrupt.
of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().
Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.
Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.19+
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq() or
platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
This change is as per suggestions from Coccinelle, e.g.,
drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is
redundant because platform_get_irq() already prints an error
[bhelgaas: squashed into one commit]
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200802142601.1635926-2-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-3-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-4-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-5-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-6-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-7-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-8-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-9-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-10-kw@linux.com
Link: https://lore.kernel.org/r/20200803071040.1663662-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> # altera
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # dwc
|
|
Add J721E in pci_device_id table so that pci-epf-test can be used
for testing PCIe EP in J721E.
Link: https://lore.kernel.org/r/20200722110317.4744-15-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
*) Supports both RC mode and EP mode
*) Supports MSI and MSI-X support
*) Supports upto GEN3 speed mode
*) Supports SR-IOV capability
*) Ability to route all transactions via SMMU (support will be added
in a later patch).
Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Add infrastructure to allow DT irqchip platform drivers to
be built as modules
- Allow qcom-pdc, mtk-cirq and mtk-sysirq to be built as module
- Fix ACPI probing to avoid abusing function pointer casting
- Allow bcm7120-l2 and brcmstb-l2 to be used as wake-up sources
- Teach NXP's IMX INTMUX some power management
- Allow stm32-exti to be used as a hierarchical irqchip
- Let stm32-exti use the hw spinlock API in its full glory
- A couple of GICv4.1 fixes
- Tons of cleanups (mtk-sysirq, aic5, bcm7038-l1, imx-intmux,
brcmstb-l2, ativic32, ti-sci-inta, lonsoon, MIPS GIC, GICv3)
|
|
All the LEDs in the queue are RGB, so they should not use multi for
their color.
Make sure we don't add such LED by mistake (and make it part of ABI).
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
Multicolor is a bit too abstract. Yes, we can have
Green-Magenta-Ultraviolet LED, but so far all the LEDs we support are
RGB, and not even RGB-White or RGB-Yellow variants emerged.
Multicolor is not a good fit for RGB LED. It does not really know
about LED color. In particular, there's no way to make LED "white".
Userspace is interested in knowing "this LED can produce arbitrary
color", which not all multicolor LEDs can.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
* acpi-mm:
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
* acpi-tables:
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPI: tables: avoid relocations for table signature array
* acpi-apei:
ACPI: APEI: remove redundant assignment to variable rc
* acpi-misc:
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: Use fallthrough pseudo-keyword
|
|
and 'acpi-prop'
* acpi-proc:
ACPI: procfs: Remove last dirs after being marked deprecated for a decade
* acpi-sysfs:
ACPI: sysfs: add newlines when printing module parameters
* acpi-pad:
ACPI: PAD: Eliminate usage of uninitialized_var() macro
* acpi-ec:
ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
* acpi-pci:
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
* acpi-prop:
ACPI: property: use cached name in acpi_fwnode_get_named_child_node()
|
|
* pm-sleep:
PM: sleep: spread "const char *" correctness
PM: hibernate: fix white space in a few places
freezer: Add unsafe version of freezable_schedule_timeout_interruptible() for NFS
PM: sleep: core: Emit changed uevent on wakeup_sysfs_add/remove
* pm-domains:
PM: domains: Restore comment indentation for generic_pm_domain.child_links
PM: domains: Fix up terminology with parent/child
* powercap:
powercap: Add Power Limit4 support
powercap: idle_inject: Replace play_idle() with play_idle_precise() in comments
powercap: intel_rapl: add support for Sapphire Rapids
* pm-tools:
pm-graph v5.7 - important s2idle fixes
cpupower: Replace HTTP links with HTTPS ones
cpupower: Fix NULL but dereferenced coccicheck errors
cpupower: Fix comparing pointer to 0 coccicheck warns
|
|
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
|
|
* pm-cpuidle:
cpuidle: ACPI: fix 'return' with no value build warning
intel_idle: Customize IceLake server support
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
cpuidle: psci: Split into two separate build objects
intel_idle: Eliminate redundant static variable
|
|
* pm-em:
OPP: refactor dev_pm_opp_of_register_em() and update related drivers
Documentation: power: update Energy Model description
PM / EM: change name of em_pd_energy to em_cpu_energy
PM / EM: remove em_register_perf_domain
PM / EM: add support for other devices than CPUs in Energy Model
PM / EM: update callback structure and add device pointer
PM / EM: introduce em_dev_register_perf_domain function
PM / EM: change naming convention from 'capacity' to 'performance'
* pm-core:
mmc: jz4740: Use pm_ptr() macro
PM: Make *_DEV_PM_OPS macros use __maybe_unused
PM: core: introduce pm_ptr() macro
|
|
* pm-devfreq:
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
|
|
Degraded raid6 always do reconstruct-write now. With raid6 xor supported,
we can do rmw in degraded raid6. This patch can reduce many read IOs to
improve performance.
If the failed disk is P, Q or the disk we want to write to, we may need to
do reconstruct-write in max degraded raid6. In this situation we can not
read enough data from handle_stripe_dirtying() so we have to set force_rcw
in handle_stripe_fill() to read all data.
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
In degraded raid5, we need to read parity to do reconstruct-write when
data disks fail. However, we can not read parity from
handle_stripe_dirtying() in force reconstruct-write mode.
Reproducible Steps:
1. Create degraded raid5
mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing
2. Set rmw_level to 0
echo 0 > /sys/block/md2/md/rmw_level
3. IO to raid5
Now some io may be stuck in raid5. We can use handle_stripe_fill() to read
the parity in this situation.
Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: Danny Shih <dannyshih@synology.com>
Signed-off-by: ChangSyun Peng <allenpeng@synology.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit dfd74a1edfaba5864276a2859190a8d242d18952.
This has been fixed by commit dca4436d1cf9e0d237c which added the out
of bounds check to __add_memory, so that trying to add blocks past
MAX_PHYSMEM_BITS will fail.
Note the check in the Xen balloon driver was bogus anyway, as it
checked the start address of the resource, but it should instead test
the end address to assert the whole resource falls below
MAX_PHYSMEM_BITS.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200727091342.52325-4-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
So it can be killed, or else processes can get hung indefinitely
waiting for balloon pages.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
target_unpopulated is incremented with nr_pages at the start of the
function, but the call to free_xenballooned_pages will only subtract
pgno number of pages, and thus the rest need to be subtracted before
returning or else accounting will be skewed.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
As we can see, R5_LOCKED is set and s.locked is increased whether
R5_ReWrite is set or not, so move it to common path.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Replace mddev_lock with spin_lock to align with other show methods in
raid5_attrs.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
It is better to print errno instead of bi_status.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
The flag is already set before compare rcw with rmw, so it is
not necessary to do it again.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Report the UUID of the MD array in the following format:
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
This is useful if you don't want to wait for udev to identify array.
And it is also easy for script to monitor it with the format.
Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de>
[Guoqing: mention the change in md.rst]
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
To grow size of super 1.0 raid array, it is necessary to check the device
max usable size.
Now it uses rdev->sectors for max usable size. If one disk is 500G and the
raid device only uses the 100GB of this disk. rdev->sectors can't tell the
real max usable size. The max usable size should be
dev_size-(superblock_size+bitmap_size+badblock_size).
Also, remove unnecessary sb_start update in super_1_rdev_size_change().
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
In 2019, we introduced pin_user_pages*() and now we are converting
get_user_pages*() to the new API as appropriate. [1] & [2] could
be referred for more information. This is case 5 as per document [1].
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-4-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
pages need to be marked as dirty before unpinned it in
unlock_pages() which was oversight. This is fixed now.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-3-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Previously, if lock_pages() end up partially mapping pages, it used
to return -ERRNO due to which unlock_pages() have to go through
each pages[i] till *nr_pages* to validate them. This can be avoided
by passing correct number of partially mapped pages & -ERRNO separately,
while returning from lock_pages() due to error.
With this fix unlock_pages() doesn't need to validate pages[i] till
*nr_pages* for error scenario and few condition checks can be ignored.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Paul Durrant <xadimgnik@gmail.com>
Link: https://lore.kernel.org/r/1594525195-28345-2-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
ubi_wl_entry related with the fm_next_anchor PEB is not freed during
detach, which causes a memory leak.
Don't forget to release fm_next_anchor PEB while detaching ubi from
mtd when CONFIG_MTD_UBI_FASTMAP is enabled.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Fixes: 4b68bf9a69d22d ("ubi: Select fastmap anchor PEBs considering...")
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Following process triggers a memleak caused by forgetting to release the
initial next anchor PEB (CONFIG_MTD_UBI_FASTMAP is disabled):
1. attach -> __erase_worker -> produce the initial next anchor PEB
2. detach -> ubi_fastmap_close (Do nothing, it should have released the
initial next anchor PEB)
Don't produce the initial next anchor PEB in __erase_worker() when fastmap
is disabled.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes: f9c34bb529975fe ("ubi: Fix producing anchor PEBs")
Reported-by: syzbot+d9aab50b1154e3d163f5@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
