| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Krzysztof Wilczyński:
"Two small patches that are important for fixing boot time hang on
Intel JHL7540 'Titan Ridge' platforms equipped with a Thunderbolt
controller.
The boot time issue manifests itself when a PCI Express bandwidth
control is unnecessarily enabled on the Thunderbolt controller
downstream ports, which only supports a link speed of 2.5 GT/s in
accordance with USB4 v2 specification (p. 671, sec. 11.2.1, "PCIe
Physical Layer Logical Sub-block").
As such, there is no need to enable bandwidth control on such
downstream port links, which also works around the issue.
Both patches were tested by the original reporter on the hardware on
which the failure origin golly manifested itself. Both fixes were
proven to resolve the reported boot hang issue, and both patches have
been in linux-next this week with no reported problems"
* tag 'pci-v6.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Enable only if more than one speed is supported
PCI: Honor Max Link Speed when determining supported speeds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some amd-pstate driver issues:
- Detect preferred core support in amd-pstate before driver
registration to avoid initialization ordering issues (K Prateek
Nayak)
- Fix issues with with boost numerator handling in amd-pstate leading
to inconsistently programmed CPPC max performance values (Mario
Limonciello)"
* tag 'pm-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate: Use boost numerator for upper bound of frequencies
cpufreq/amd-pstate: Store the boost numerator as highest perf again
cpufreq/amd-pstate: Detect preferred core support before driver registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues with the user thermal thresholds feature introduced in
this development cycle (Daniel Lezcano)"
* tag 'thermal-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/thresholds: Fix boundaries and detection routine
thermal/thresholds: Fix uapi header macros leading to a compilation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Unbreak ACPI EC support on LoongArch that has been broken earlier in
this development cycle (Huacai Chen)"
* tag 'acpi-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Enable EC support on LoongArch by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix reporting of negative temperature, current, and voltage values in
the tmp513 driver
* tag 'hwmon-for-v6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp513) Fix interpretation of values of Temperature Result and Limit Registers
hwmon: (tmp513) Fix Current Register value interpretation
hwmon: (tmp513) Fix interpretation of values of Shunt Voltage and Limit Registers
|
|
Google Juniper and other Chromebook platforms have a very old bootloader
which populates /firmware node without proper address/size-cells leading
to warnings:
Missing '#address-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:106 of_bus_n_addr_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Hardware name: Google juniper sku16 board (DT)
...
Missing '#size-cells' in /firmware
WARNING: CPU: 0 PID: 1 at drivers/of/base.c:133 of_bus_n_size_cells+0x90/0xf0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.0 #1 933ab9971ff4d5dc58cb378a96f64c7f72e3454d
Tainted: [W]=WARN
Hardware name: Google juniper sku16 board (DT)
These platform won't receive updated bootloader/firmware, so add an
exclusion for platforms with a "coreboot" compatible node. While this is
wider than necessary, that's the easiest fix and it doesn't doesn't
matter if we miss checking other platforms using coreboot.
We may revisit this later and address with a fixup to the DT itself.
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z0NUdoG17EwuCigT@sashalap/
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Minor cleanups for bdev/nvme using the helpers introduced
- Revert of a deadlock fix that still needs more work
- Fix a UAF of hctx in the cpu hotplug code
* tag 'block-6.13-20241220' of git://git.kernel.dk/linux:
block: avoid to reuse `hctx` not removed from cpuhp callback list
block: Revert "block: Fix potential deadlock while freezing queue and acquiring sysfs_lock"
nvme: use blk_validate_block_size() for max LBA check
block/bdev: use helper for max block size check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some important, and small, fixes for USB and Thunderbolt
issues that have come up in the -rc releases. And some new device ids
for good measure. Included in here are:
- Much reported xhci bugfix for usb-storage devices (and other
devices as well, tripped me up on a video camera)
- thunderbolt fixes for some small reported issues
- new usb-serial device ids
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: fix ring expansion regression in 6.13-rc1
xhci: Turn NEC specific quirk for handling Stop Endpoint errors generic
thunderbolt: Improve redrive mode handling
USB: serial: option: add Telit FE910C04 rmnet compositions
USB: serial: option: add MediaTek T7XX compositions
USB: serial: option: add Netprisma LCUK54 modules for WWAN Ready
USB: serial: option: add MeiG Smart SLM770A
USB: serial: option: add TCL IK512 MBIM & ECM
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A fix for the remove path of the Rockchip driver, the code was just
clearly and obviously wrong"
* tag 'spi-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: rockchip-sfc: Fix error in remove progress
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"The recently added regulator-uv-survival-time-ms property was renamed
during the review of the series that added it, but unfortunately only
in the DT binding and not in the code that parses the binding.
This brings the code in line with the binding, if someone started
using the original name we can add compat support for it but there's
nothing upstream yet and it's a very niche feature so hopefully not"
* tag 'regulator-fix-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rename regulator-uv-survival-time-ms according to DT binding
|
|
Pull drm fixes from Dave Airlie:
"Probably the last pull before Christmas holidays, I'll still be around
for most of the time anyways, nothing too major in here, bunch of
amdgpu and i915 along with a smattering of fixes across the board.
core:
- fix FB dependency
- avoid div by 0 more in vrefresh
- maintainers update
display:
- fix DP tunnel error path
dma-buf:
- fix !DEBUG_FS
sched:
- docs warning fix
panel:
- collection of misc panel fixes
i915:
- Reset engine utilization buffer before registration
- Ensure busyness counter increases motonically
- Accumulate active runtime on gt reset
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
udmabuf:
- fix memory leak on last export
- sealing fixes
ivpu:
- fix NULL pointer
- fix memory leak
- fix WARN"
* tag 'drm-fixes-2024-12-20' of https://gitlab.freedesktop.org/drm/kernel: (33 commits)
drm/sched: Fix drm_sched_fini() docu generation
accel/ivpu: Fix WARN in ivpu_ipc_send_receive_internal()
accel/ivpu: Fix memory leak in ivpu_mmu_reserved_context_init()
accel/ivpu: Fix general protection fault in ivpu_bo_list()
drm/amdgpu/nbio7.0: fix IP version check
drm/amd: Update strapping for NBIO 2.5.0
drm/amdgpu: Handle NULL bo->tbo.resource (again) in amdgpu_vm_bo_update
drm/amdgpu: fix amdgpu_coredump
drm/amdgpu/smu14.0.2: fix IP version check
drm/amdgpu/gfx12: fix IP version check
drm/amdgpu/mmhub4.1: fix IP version check
drm/amdgpu/nbio7.11: fix IP version check
drm/amdgpu/nbio7.7: fix IP version check
drm/amdgpu: don't access invalid sched
drm/amd: Require CONFIG_HOTPLUG_PCI_PCIE for BOCO
drm: rework FB_CORE dependency
drm/fbdev: Select FB_CORE dependency for fbdev on DMA and TTM
fbdev: Fix recursive dependencies wrt BACKLIGHT_CLASS_DEVICE
i915/guc: Accumulate active runtime on gt reset
i915/guc: Ensure busyness counter increases motonically
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V soc driver fixes for v6.13-rc4
A single fix for the Auto Update driver, where a mistake in array
indexing (accessing as a u32 rather than a u8) caused the driver to read
the wrong feature disable bits.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: fix UL_IAP lock check in mpfs_auto_update_state()
Link: https://lore.kernel.org/r/20241218-suffrage-unfazed-fa0113072a42@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch fixes a number of consistency issues in the queue allocation
path related to XDP.
As it stands, the number of allocated XDP queues changes in three
different scenarios.
1) Adding an XDP program while the interface is up via
gve_add_xdp_queues
2) Removing an XDP program while the interface is up via
gve_remove_xdp_queues
3) After queues have been allocated and the old queue memory has been
removed in gve_queues_start.
However, the requirement for the interface to be up for
gve_(add|remove)_xdp_queues to be called, in conjunction with the fact
that the number of queues stored in priv isn't updated until _after_ XDP
queues have been allocated in the normal queue allocation path means
that if an XDP program is added while the interface is down, XDP queues
won't be added until the _second_ if_up, not the first.
Given the expectation that the number of XDP queues is equal to the
number of RX queues, scenario (3) has another problematic implication.
When changing the number of queues while an XDP program is loaded, the
number of XDP queues must be updated as well, as there is logic in the
driver (gve_xdp_tx_queue_id()) which relies on every RX queue having a
corresponding XDP TX queue. However, the number of XDP queues stored in
priv would not be updated until _after_ a close/open leading to a
mismatch in the number of XDP queues reported vs the number of XDP
queues which actually exist after the queue count update completes.
This patch remedies these issues by doing the following:
1) The allocation config getter function is set up to retrieve the
_expected_ number of XDP queues to allocate instead of relying
on the value stored in `priv` which is only updated once the queues
have been allocated.
2) When adjusting queues, XDP queues are adjusted to match the number of
RX queues when XDP is enabled. This only works in the case when
queues are live, so part (1) of the fix must still be available in
the case that queues are adjusted when there is an XDP program and
the interface is down.
Fixes: 5f08cd3d6423 ("gve: Alloc before freeing when adjusting queues")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When busy polling is enabled, xsk_sendmsg for AF_XDP zero copy marks
the NAPI ID corresponding to the memory pool allocated for the socket.
In GVE, this NAPI ID will never correspond to a NAPI ID of one of the
dedicated XDP TX queues registered with the umem because XDP TX is not
set up to share a NAPI with a corresponding RX queue.
This patch moves XSK TX descriptor processing from the TX NAPI to the RX
NAPI, and the gve_xsk_wakeup callback is updated to use the RX NAPI
instead of the TX NAPI, accordingly. The branch on if the wakeup is for
TX is removed, as the NAPI poll should be invoked whether the wakeup is
for TX or for RX.
Fixes: fd8e40321a12 ("gve: Add AF_XDP zero-copy support for GQI-QPL format")
Cc: stable@vger.kernel.org
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch predicates the enabling and disabling of XSK pools on the
existence of queues. As it stands, if the interface is down, disabling
or enabling XSK pools would result in a crash, as the RX queue pointer
would be NULL. XSK pool registration will occur as part of the next
interface up.
Similarly, xsk_wakeup needs be guarded against queues disappearing
while the function is executing, so a check against the
GVE_PRIV_FLAGS_NAPI_ENABLED flag is added to synchronize with the
disabling of the bit and the synchronize_net() in gve_turndown.
Fixes: fd8e40321a12 ("gve: Add AF_XDP zero-copy support for GQI-QPL format")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In GVE, dedicated XDP queues only exist when an XDP program is installed
and the interface is up. As such, the NDO XDP XMIT callback should
return early if either of these conditions are false.
In the case of no loaded XDP program, priv->num_xdp_queues=0 which can
cause a divide-by-zero error, and in the case of interface down,
num_xdp_queues remains untouched to persist XDP queue count for the next
interface up, but the TX pointer itself would be NULL.
The XDP xmit callback also needs to synchronize with a device
transitioning from open to close. This synchronization will happen via
the GVE_PRIV_FLAGS_NAPI_ENABLED bit along with a synchronize_net() call,
which waits for any RCU critical sections at call-time to complete.
Fixes: 39a7f4aa3e4a ("gve: Add XDP REDIRECT support for GQI-QPL format")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When stopping XDP TX rings, the XDP clean function needs to be called to
clean out the entire queue, similar to what happens in the normal TX
queue case. Otherwise, the FIFO won't be cleared correctly, and
xsk_tx_completed won't be reported.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Cc: stable@vger.kernel.org
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-18:
amdgpu:
- Disable BOCO when CONFIG_HOTPLUG_PCI_PCIE is not enabled
- scheduler job fixes
- IP version check fixes
- devcoredump fix
- GPUVM update fix
- NBIO 2.5 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218204637.2966198-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.13-rc5
Few minor fixes this time, nothing special.
* tag 'wireless-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cw1200: Fix potential NULL dereference
wifi: iwlwifi: mvm: Fix __counted_by usage in cfg80211_wowlan_nd_*
MAINTAINERS: wifi: ath: add Jeff Johnson as maintainer
wifi: iwlwifi: fix CRF name for Bz
====================
Link: https://patch.msgid.link/20241219185042.662B6C4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The aging count is not a simple 20-bit value but comprises a 3-bit
multiplier and a 20-bit second time. The code tries to use the
original multiplier which is 4 as the second count is still 300 seconds
by default.
As the 20-bit number is now too large for practical use there is an option
to interpret it as microseconds instead of seconds.
Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218020224.70590-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The aging count is not a simple 11-bit value but comprises a 3-bit
multiplier and an 8-bit second count. The code tries to use the
original multiplier which is 4 as the second count is still 300 seconds
by default.
Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218020224.70590-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop
unsupported 1-lane.
[1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf
[2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf
Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device")
Reported-by: Hien Huynh <hien.huynh.px@renesas.com>
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The host_node pointer was assigned and freed in adv7533_parse_dt(), and
later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue
by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put()
in error path of probe() and also in the remove().
Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device")
Cc: stable@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1
while updating Audio InfoFrame information and then set to 0 when done.
Otherwise partially updated Audio InfoFrames could be sent out. Two
cases where this rule were not followed are fixed:
- In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated
before/after setting ADV7511_REG_AUDIO_INFOFRAME.
- In audio_startup() use the correct register for clearing
AUDIO_UPDATE bit.
The problem with corrupted audio infoframes were discovered by letting
a HDMI logic analyser check the output of ADV7535.
Note that this patchs replaces writing REG_GC(1) with
REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field
GC_PP[3:0] and that field doesn't control audio infoframe and is read-
only. My conclusion therefore was that the author if this code meant to
clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support")
Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
On the i.MX6ULL-14x14-EVK board, enet1_ref and enet2_ref are used as the
clock sources for two external KSZ PHYs. However, after closing the two
FEC ports, the clk_enable_count of the enet1_ref and enet2_ref clocks is
not 0. The root cause is that since the commit 985329462723 ("net: phy:
micrel: use devm_clk_get_optional_enabled for the rmii-ref clock"), the
external clock of KSZ PHY has been enabled when the PHY driver probes,
and it can only be disabled when the PHY driver is removed. This causes
the clock to continue working when the system is suspended or the network
port is down.
Although Heiko explained in the commit message that the patch was because
some clock suppliers need to enable the clock to get the valid clock rate
, it seems that the simple fix is to disable the clock after getting the
clock rate to solve the current problem. This is indeed true, but we need
to admit that Heiko's patch has been applied for more than a year, and we
cannot guarantee whether there are platforms that only enable rmii-ref in
the KSZ PHY driver during this period. If this is the case, disabling
rmii-ref will cause RMII on these platforms to not work.
Secondly, commit 99ac4cbcc2a5 ("net: phy: micrel: allow usage of generic
ethernet-phy clock") just simply enables the generic clock permanently,
which seems like the generic clock may only be enabled in the PHY driver.
If we simply disable the generic clock, RMII may not work. If we keep it
as it is, the platform using the generic clock will have the same problem
as the i.MX6ULL platform.
To solve this problem, the clock is enabled when phy_driver::resume() is
called, and the clock is disabled when phy_driver::suspend() is called.
Since phy_driver::resume() and phy_driver::suspend() are not called in
pairs, an additional clk_enable flag is added. When phy_driver::suspend()
is called, the clock is disabled only if clk_enable is true. Conversely,
when phy_driver::resume() is called, the clock is enabled if clk_enable
is false.
The changes that introduced the problem were only a few lines, while the
current fix is about a hundred lines, which seems out of proportion, but
it is necessary because kszphy_probe() is used by multiple KSZ PHYs and
we need to fix all of them.
Fixes: 985329462723 ("net: phy: micrel: use devm_clk_get_optional_enabled for the rmii-ref clock")
Fixes: 99ac4cbcc2a5 ("net: phy: micrel: allow usage of generic ethernet-phy clock")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20241217063500.1424011-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13-rc4:
- udma-buf fixes related to sealing.
- dma-buf build warning fix when debugfs is not enabled.
- Assorted drm/panel fixes.
- Correct error return in drm_dp_tunnel_mgr_create.
- Fix even more divide by zero in drm_mode_vrefresh.
- Fix FBDEV dependencies in Kconfig.
- Documentation fix for drm_sched_fini.
- IVPU NULL pointer, memory leak and WARN fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: try the outer netns attribute in rtnl_get_peer_net()
- rust: net::phy fix module autoloading
Current release - new code bugs:
- phy: avoid undefined behavior in *_led_polarity_set()
- eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create()
Previous releases - regressions:
- smc: check sndbuf_space again after NOSPACE flag is set in smc_poll
- ipvs: fix clamp() of ip_vs_conn_tab on small memory systems
- dsa: restore dsa_software_vlan_untag() ability to operate on
VLAN-untagged traffic
- eth:
- tun: fix tun_napi_alloc_frags()
- ionic: no double destroy workqueue
- idpf: trigger SW interrupt when exiting wb_on_itr mode
- rswitch: rework ts tags management
- team: fix feature exposure when no ports are present
Previous releases - always broken:
- core: fix repeated netlink messages in queue dump
- mdiobus: fix an OF node reference leak
- smc: check iparea_offset and ipv6_prefixes_cnt when receiving
proposal msg
- can: fix missed interrupts with m_can_pci
- eth: oa_tc6: fix infinite loop error when tx credits becomes 0"
* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- mtk-sd: Cleanup the wakeup configuration in error/remove-path
- sdhci-tegra: Correct quirk for ADMA2 length
* tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe()
mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
|
|
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds")
Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org
Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
|
|
The genpd device, which is really only used as a handle to lookup
OPP, but not even registered to the device core otherwise and thus
lifetime linked to the genpd struct it is contained in, is missing
a release function. After b8f7bbd1f4ec ("pmdomain: core: Add
missing put_device()") the device will be cleaned up going through
the driver core device_release() function, which will warn when no
release callback is present for the device. Add a dummy release
function to shut up the warning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: b8f7bbd1f4ec ("pmdomain: core: Add missing put_device()")
Cc: stable@vger.kernel.org
Message-ID: <20241218184433.1930532-1-l.stach@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
imx_gpcv2_probe() leaks an OF node reference obtained by
of_get_child_by_name(). Fix it by declaring the device node with the
__free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Message-ID: <20241215030159.1526624-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
introduced an incorrect check of the algorithm ID into the key eviction
path, and thus qcom_ice_evict_key() is no longer ever called. Fix it.
Fixes: c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-6-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Move pm_runtime_set_active() to ivpu_pm_init() so when
ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable()
it already has correct runtime state, even if last resume was
not successful.
Fixes: 8ed520ff4682 ("accel/ivpu: Move set autosuspend delay to HW specific code")
Cc: stable@vger.kernel.org # v6.7+
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-4-jacek.lawrynowicz@linux.intel.com
|
|
Add appropriate error handling to ensure all allocated resources are
released upon encountering an error.
Fixes: a74f4d991352 ("accel/ivpu: Defer MMU root page table allocation")
Cc: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-3-jacek.lawrynowicz@linux.intel.com
|
|
Check if ctx is not NULL before accessing its fields.
Fixes: 37dee2a2f433 ("accel/ivpu: Improve buffer object debug logs")
Cc: stable@vger.kernel.org # v6.8
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-2-jacek.lawrynowicz@linux.intel.com
|
|
QP table handling is synchronized with destroy QP and Async
event from the HW. The same needs to be synchronized
during create_qp also. Use the same lock in create_qp also.
Fixes: 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array")
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For variable size wqe mode, the MSN table size should be
half the size of the SQ depth. Fixing this to avoid wrap
around problems in the retransmission path.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For the fixed WQE case, HW supports 0xFFFF WQEs.
For variable Size WQEs, HW treats this number as
the 16 bytes slots. The maximum supported WQEs
needs to be adjusted based on the number of slots.
Set a maximum WQE limit for variable WQE scenario.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Disabling the reserved wqes logic for Gen P5/P7 devices
because this workaround is required only for legacy devices.
Fixes: ecb53febfcad ("RDMA/bnxt_en: Enable RDMA driver support for 57500 chip")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
While creating qps, driver adds one extra entry to the sq size
passed by the ULPs in order to avoid queue full condition.
When ULPs creates QPs with max_qp_wr reported, driver creates
QP with 1 more than the max_wqes supported by HW. Create QP fails
in this case. To avoid this error, reduce 1 entry in max_qp_wqes
and report it to the stack.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.13-rc4
This includes following USB4/Thunderbolt fixes for v6.13-rc4:
- Add Intel Panther Lake PCI IDs
- Do not show nvm_version for retimers that are not supported
- Fix redrive mode handling.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.13-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Improve redrive mode handling
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
The regulator bindings don't document regulator-uv-survival-time-ms, but
the more descriptive regulator-uv-less-critical-window-ms instead.
Looking back at v3[1] and v4[2] of the series adding the support,
the property was indeed renamed between these patch series, but
unfortunately the rename only made it into the DT bindings with the
driver code still using the old name.
Let's therefore rename the property in the driver code to follow suit.
This will break backwards compatibility, but there are no upstream
device trees using the property and we never documented the old name
of the property anyway. ¯\_(ツ)_/¯"
[1]: https://lore.kernel.org/all/20231025084614.3092295-7-o.rempel@pengutronix.de/
[2]: https://lore.kernel.org/all/20231026144824.4065145-5-o.rempel@pengutronix.de/
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20241218-regulator-uv-survival-time-ms-rename-v1-1-6cac9c3c75da@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Do not manage a per device direct link to net_device. Rely
on associated ib_devices net_device management, not doubling
the effort locally. A badly managed local link to net_device
was causing a 'KASAN: slab-use-after-free' exception during
siw_query_port() call.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Reported-by: syzbot+4b87489410b4efd181bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4b87489410b4efd181bf
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://patch.msgid.link/20241212151848.564872-1-bmt@zurich.ibm.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In case of error set the error code before the goto.
Fixes: 6ff57a2ea7c2 ("RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-rdma/a84a2fc3-33b6-46da-a1bd-3343fa07eaf9@stanley.mountain/
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/13eb25961923f5de9eb9ecbbc94e26113d6049ef.1733815944.git.leonro@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Unregister the devlink port when register_netdev() fails.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When rvu_rep_devlink_port_register() fails, free_netdev(ndev) for this
incomplete iteration before going to "exit:" label.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
