summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-17Merge tag 'drm-intel-gt-next-2023-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: Fixes/improvements/new stuff: - Register engines early to avoid type confusion (Mathias Krause) - Suppress 'ignoring reset notification' message [guc] (John Harrison) - Update 'recommended' version to 70.12.1 for DG2/ADL-S/ADL-P/MTL [guc] (John Harrison) - Enable WA 14018913170 [guc, dg2] (Daniele Ceraolo Spurio) Future platform enablement: - Clean steer semaphore on resume (Nirmoy Das) - Skip MCR ops for ring fault register [mtl] (Nirmoy Das) - Make i915_gem_shrinker multi-gt aware [gem] (Jonathan Cavitt) - Enable GGTT updates with binder in MTL (Nirmoy Das, Chris Wilson) - Invalidate the TLBs on each GT (Chris Wilson) Miscellaneous: - Clarify type evolution of uabi_node/uabi_engines (Mathias Krause) - Annotate struct ct_incoming_msg with __counted_by [guc] (Kees Cook) - More use of GT specific print helpers [gt] (John Harrison) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZSfKotZVdypU6NaX@tursulin-desk
2023-10-16scsi: qla2xxx: Fix double free of dsd_list during driver loadQuinn Tran
On driver load, scsi_add_host() can fail. This triggers the free path to call qla2x00_mem_free() multiple times. This causes NULL pointer access of ha->base_qpair. Add check before access. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] PGD 8000001fcfe4a067 PUD 1fc8f0a067 PMD 0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffffc118f73c>] [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] RSP: 0018:ffff8ace97a93a30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8ace8efd0000 RCX: 000000000000488f RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8ace97a93a60 R08: 000000000001f040 R09: ffffffff8678209b R10: ffff8acf7d6df040 R11: ffffc591c0fcc980 R12: ffffffff87034800 R13: ffff8acf0e3cc740 R14: ffff8ace8efd0000 R15: 00000000fffffff4 FS: 00007f4cf5449740(0000) GS:ffff8acf7d6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000001fc2f6c000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff86781f18>] ? kobject_put+0x28/0x60 [<ffffffffc119a59c>] qla2x00_probe_one+0x19fc/0x3040 [qla2xxx] Fixes: efeda3bf912f ("scsi: qla2xxx: Move resource to allow code reuse") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20231016101749.5059-1-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-16scsi: mpt3sas: Fix in error pathTomas Henzl
The driver should be deregistered as misc driver after PCI registration failure. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-16Merge tag 'for-net-2023-10-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix race when opening vhci device - Avoid memcmp() out of bounds warning - Correctly bounds check and pad HCI_MON_NEW_INDEX name - Fix using memcmp when comparing keys - Ignore error return for hci_devcd_register() in btrtl - Always check if connection is alive before deleting - Fix a refcnt underflow problem for hci_conn * tag 'for-net-2023-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name Bluetooth: avoid memcmp() out of bounds warning Bluetooth: hci_sock: fix slab oob read in create_monitor_event Bluetooth: btrtl: Ignore error return for hci_devcd_register() Bluetooth: hci_event: Fix coding style Bluetooth: hci_event: Fix using memcmp when comparing keys Bluetooth: Fix a refcnt underflow problem for hci_conn Bluetooth: hci_sync: always check if connection is alive before deleting Bluetooth: Reject connection with the device which has same BD_ADDR Bluetooth: hci_event: Ignore NULL link key Bluetooth: ISO: Fix invalid context error Bluetooth: vhci: Fix race when opening vhci device ==================== Link: https://lore.kernel.org/r/20231014031336.1664558-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16drivers: net: wwan: wwan_core.c: resolved spelling mistakeMuhammad Muzammil
resolved typing mistake from devce to device Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231013042304.7881-1-m.muzzammilashraf@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16net: usb: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Other implementations of .*get_drvinfo use strscpy so this patch brings sr_get_drvinfo() in line as well: igb/igb_ethtool.c +851 static void igb_get_drvinfo(struct net_device *netdev, igbvf/ethtool.c 167:static void igbvf_get_drvinfo(struct net_device *netdev, i40e/i40e_ethtool.c 1999:static void i40e_get_drvinfo(struct net_device *netdev, e1000/e1000_ethtool.c 529:static void e1000_get_drvinfo(struct net_device *netdev, ixgbevf/ethtool.c 211:static void ixgbevf_get_drvinfo(struct net_device *netdev, ... Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-usb-sr9800-c-v1-1-5540832c8ec2@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16lan78xx: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Other implementations of .*get_drvinfo use strscpy so this patch brings lan78xx_get_drvinfo() in line as well: igb/igb_ethtool.c +851 static void igb_get_drvinfo(struct net_device *netdev, igbvf/ethtool.c 167:static void igbvf_get_drvinfo(struct net_device *netdev, i40e/i40e_ethtool.c 1999:static void i40e_get_drvinfo(struct net_device *netdev, e1000/e1000_ethtool.c 529:static void e1000_get_drvinfo(struct net_device *netdev, ixgbevf/ethtool.c 211:static void ixgbevf_get_drvinfo(struct net_device *netdev, Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-usb-lan78xx-c-v1-1-99d513061dfc@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16net: phy: smsc: replace deprecated strncpy with ethtool_sprintfJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. ethtool_sprintf() is designed specifically for get_strings() usage. Let's replace strncpy in favor of this dedicated helper function. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-phy-smsc-c-v1-1-00528f7524b3@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16net: netcp: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Other implementations of .*get_drvinfo also use strscpy so this patch brings keystone_get_drvinfo() in line as well: igb/igb_ethtool.c +851 static void igb_get_drvinfo(struct net_device *netdev, igbvf/ethtool.c 167:static void igbvf_get_drvinfo(struct net_device *netdev, i40e/i40e_ethtool.c 1999:static void i40e_get_drvinfo(struct net_device *netdev, e1000/e1000_ethtool.c 529:static void e1000_get_drvinfo(struct net_device *netdev, ixgbevf/ethtool.c 211:static void ixgbevf_get_drvinfo(struct net_device *netdev, Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231012-strncpy-drivers-net-ethernet-ti-netcp_ethss-c-v1-1-93142e620864@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16fbdev: core: syscopyarea: fix sloppy typingSergey Shtylyov
In sys_copyarea(), the local variable bits_per_line is needlessly typed as *unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit type on the 64-bit arches; that variable's value is derived from the __u32 typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit *unsigned int* type should still be enough to store the # of bits per line. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-16fbdev: core: cfbcopyarea: fix sloppy typingSergey Shtylyov
In cfb_copyarea(), the local variable bits_per_line is needlessly typed as *unsigned long* -- which is a 32-bit type on the 32-bit arches and a 64-bit type on the 64-bit arches; that variable's value is derived from the __u32 typed fb_fix_screeninfo::line_length field (multiplied by 8u) and a 32-bit *unsigned int* type should still be enough to store the # of bits per line. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-16fbdev: uvesafb: Call cn_del_callback() at the end of uvesafb_exit()Jorge Maidana
Delete the v86d netlink only after all the VBE tasks have been completed. Fixes initial state restore on module unload: uvesafb: VBE state restore call failed (eax=0x4f04, err=-19) Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-16fbdev: sa1100fb: mark sa1100fb_init() staticArnd Bergmann
This is a global function that is only referenced as an initcall. This causes a warning: drivers/video/fbdev/sa1100fb.c:1218:12: error: no previous prototype for 'sa1100fb_init' [-Werror=missing-prototypes] Make it static instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-16fbdev: omapfb: fix some error codesDan Carpenter
Return negative -ENXIO instead of positive ENXIO. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-10-16Merge tag 'riscv-soc-for-v6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC drivers for v6.7 Minor changes here only. There's the treewide remove callback work from Uwe, some of my own gradual conversion of SOC_ Kconfig options and a selection of the ARM AMBA protocol required for the crypto driver on StarFive JH7110 SoCs. The latter was supposed to be in v6.6, but I forgot to send a PR. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: soc/microchip: mpfs-sys-controller: Convert to platform remove callback returning void soc: sifive: replace SOC_FOO with ARCH_FOO riscv: Kconfig: Add select ARM_AMBA to SOC_STARFIVE Link: https://lore.kernel.org/r/20231016-predator-affiliate-e8affd3a7be9@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'amlogic-drivers-for-v6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers Amlogic drivers changes for v6.7: - correct meson_sm_* API retval handling - Use device_get_match_data() in meson SM * tag 'amlogic-drivers-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: firmware: meson: Use device_get_match_data() drivers: meson: sm: correct meson_sm_* API retval handling Link: https://lore.kernel.org/r/00ef6ab3-59c1-484a-9d70-50f16e4cc584@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'memory-controller-drv-6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.7 1. Atmel: Use __counted_by annotation. 2. Tegra: Add Tegra234 clients for RCE and VI. 3. Cleanup: - Use device_get_match_data() to simplify the code, - Make "additionalProperties: true" explicit in Devicetree bindings. * tag 'memory-controller-drv-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: Use device_get_match_data() memory: tegra: Add Tegra234 clients for RCE and VI dt-bindings: memory-controllers: Make "additionalProperties: true" explicit memory: atmel-ebi: Annotate struct atmel_ebi_dev with __counted_by Link: https://lore.kernel.org/r/20231016074013.28286-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'aspeed-6.7-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/drivers ASPEED soc updates for 6.7 * Move all drivers to .remove_new callback * tag 'aspeed-6.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: soc/aspeed: Convert to platform remove callback returning void Link: https://lore.kernel.org/r/CACPK8XcTx9bd7DkguFOZ4qCxk8MJWm-yeNMLGDCnO+wv7dwa1g@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'tegra-for-6.7-memory' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers memory: tegra: Changes for v6.7-rc1 Contains a fix for a long timeout that can make it seems like the system is hanging during early resume. * tag 'tegra-for-6.7-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra: Set BPMP msg flags to reset IPC channels Link: https://lore.kernel.org/r/20231013153723.1729109-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'tegra-for-6.7-firmware' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers firmware: tegra: Changes for v6.7-rc1 Contains a typofix and a new mechanism to help fix an issue that can seemingly hang the system during early resume. * tag 'tegra-for-6.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: Add suspend hook and reset BPMP IPC early on resume firmware: tegra: Fix a typo Link: https://lore.kernel.org/r/20231013153723.1729109-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'tegra-for-6.7-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers soc/tegra: Changes for v6.7-rc1 This contains a few minor cleanups for PMC and CBB. * tag 'tegra-for-6.7-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Drop the ->opp_to_performance_state() callback soc/tegra: cbb: tegra194-cbb: Convert to platform remove callback returning void Link: https://lore.kernel.org/r/20231013153723.1729109-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'ffa-updates-6.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm FF-A updates for v6.7 The main addition is the initial support for the notifications and memory transaction descriptor changes added in FF-A v1.1 specification. The notification mechanism enables a requester/sender endpoint to notify a service provider/receiver endpoint about an event with non-blocking semantics. A notification is akin to the doorbell between two endpoints in a communication protocol that is based upon the doorbell/mailbox mechanism. The framework is responsible for the delivery of the notification from the ender to the receiver without blocking the sender. The receiver endpoint relies on the OS scheduler for allocation of CPU cycles to handle a notification. OS is referred as the receiver’s scheduler in the context of notifications. The framework is responsible for informing the receiver’s scheduler that the receiver must be run since it has a pending notification. The series also includes support for the new format of memory transaction descriptors introduced in v1.1 specification. Apart from the main additions, it includes minor fixes to re-enable FF-A drivers usage of 32bit mode of messaging and kernel warning due to the missing assignment of IDR allocation ID to the FFA device. It also adds emitting 'modalias' to the base attribute of FF-A devices. * tag 'ffa-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Upgrade the driver version to v1.1 firmware: arm_ffa: Update memory descriptor to support v1.1 format firmware: arm_ffa: Switch to using ffa_mem_desc_offset() accessor KVM: arm64: FFA: Remove access of endpoint memory access descriptor array firmware: arm_ffa: Simplify the computation of transmit and fragment length firmware: arm_ffa: Add notification handling mechanism firmware: arm_ffa: Add interface to send a notification to a given partition firmware: arm_ffa: Add interfaces to request notification callbacks firmware: arm_ffa: Add schedule receiver callback mechanism firmware: arm_ffa: Initial support for scheduler receiver interrupt firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface firmware: arm_ffa: Implement the FFA_NOTIFICATION_GET interface firmware: arm_ffa: Implement the FFA_NOTIFICATION_SET interface firmware: arm_ffa: Implement the FFA_RUN interface firmware: arm_ffa: Implement the notification bind and unbind interface firmware: arm_ffa: Implement notification bitmap create and destroy interfaces firmware: arm_ffa: Update the FF-A command list with v1.1 additions firmware: arm_ffa: Emit modalias for FF-A devices firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device Link: https://lore.kernel.org/r/20231010124354.1620064-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'scmi-updates-6.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm SCMI updates for v6.7 Main additions this time include: 1. SCMI v3.2 clock configuration support: This helps to retrieve the enabled state of a clock as well as allow to set OEM specific clock configurations. 2. Support for generic performance scaling(DVFS): The current SCMI DVFS support is limited to the CPUs in the kernel. This extension enables it to used for all kind of devices and not only for the CPUs. It updates the SCMI cpufreq to utilize the power domain bindings. It also adds a more generic SCMI performance domain based on the genpd framework that as be used for all the non-CPU devices. 3. Extend the generic performance scaling(DVFS) support for firmware driver OPPs: Consumer drivers for devices that are attached to the SCMI performance domain can't make use of the current OPP library to scale performance as the OPPs are firmware driven and often obtained from the firmware rather than the device tree. These changes extend the generic OPP and genpd PM domain frameworks to identify and utilise these firmware driven OPPs. 4. SCMI v3.2 clock parent support: This enables the support for discovering and changing parent clocks and extending the SCMI clk driver to use the same. 5. Qualcom SMC/HVC transport support: The Qualcomm virtual platforms require capability id in the hypervisor call to identify which doorbell to assert when supporting multiple SMC/HVC based SCMI transport channels. Extra parameter is added to support the same and the same is obtained at the fixed address in the shared memory which is initialised by the firmware. 6. Move the existing SCMI power domain driver under drivers/pmdomain Apart from the above main changes, it also include couple of minor fixes and cosmetic reworks. * tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits) firmware: arm_scmi: Add qcom smc/hvc transport support dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke() clk: scmi: Add support for clock {set,get}_parent firmware: arm_scmi: Add support for clock parents clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped firmware: arm_scpi: Use device_get_match_data() firmware: arm_scmi: Add generic OPP support to the SCMI performance domain firmware: arm_scmi: Specify the performance level when adding an OPP firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add() OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state() firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21} firmware: arm_scmi: Do not use !! on boolean when setting msg->flags firmware: arm_scmi: Move power-domain driver to the pmdomain dir pmdomain: arm: Add the SCMI performance domain ... Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'vexpress-update-6.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm Vexpress updates for v6.7 Just a single update to use __counted_by annotation in config bus driver in preparation to the upcoming versions of the toolchains(GCC and Clang) with __counted_by attribute. * tag 'vexpress-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: bus: vexpress-config: Annotate struct vexpress_syscfg_func with __counted_by Link: https://lore.kernel.org/r/20231010124339.1620012-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'v6.6-next-soc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers MediaTek drivers updates for v6.7 - Added support for Smart Voltage Scaling (SVS) on the MT8188 SoC * tag 'v6.6-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: svs: Add support for voltage bins soc: mediatek: svs: Add support for MT8188 SoC dt-bindings: soc: mediatek: add mt8188 svs dt-bindings Link: https://lore.kernel.org/r/d25ccd90-277a-fd05-8605-f7d1d129d4fa@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'renesas-drivers-for-v6.7-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers Renesas driver updates for v6.7 - Identify the new RZ/G3S SoC, - Miscellaneous fixes and improvements. * tag 'renesas-drivers-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: Kconfig: Remove blank line before ARCH_R9A07G043 help text soc: renesas: renesas-soc: Remove blank lines soc: renesas: Identify RZ/G3S SoC Link: https://lore.kernel.org/r/cover.1695985423.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16Merge tag 'platform-remove-void-soc-for-6.7-rc' of ↵Arnd Bergmann
https://git.pengutronix.de/git/ukl/linux into soc/drivers Convert drivers/soc to struct platform_driver::remove_new() This PR contains the patches I sent in the series available at https://lore.kernel.org/all/20230925095532.1984344-1-u.kleine-koenig@pengutronix.de that were not yet picked up in next as of next-20231013. It converts all drivers below drivers/soc to let their remove callback return void. See commit 5c5a7680e67b ("platform: Provide a remove callback that returns no value") for the rationale. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16soc: samsung: exynos-chipid: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230925095532.1984344-32-u.kleine-koenig@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231016072911.27148-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-16drm/panel: st7703: Add Powkiddy RGB30 Panel SupportChris Morgan
The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in the Powkiddy RGB30 handheld gaming device. Add support for it. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231013183918.225666-4-macroalpha82@gmail.com
2023-10-16nvmem: imx: correct nregs for i.MX6ULLPeng Fan
The nregs for i.MX6ULL should be 80 per fuse map, correct it. Fixes: ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16nvmem: imx: correct nregs for i.MX6ULPeng Fan
The nregs for i.MX6UL should be 144 per fuse map, correct it. Fixes: 4aa2b4802046 ("nvmem: octop: Add support for imx6ul") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16nvmem: imx: correct nregs for i.MX6SLLPeng Fan
The nregs for i.MX6SLL should be 80 per fuse map, correct it. Fixes: 6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013124904.175782-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Unmap only if buffer is unmapped from DSPEkansh Gupta
For unmapping any buffer from kernel, it should first be unmapped from DSP. In case unmap from DSP request fails, the map should not be removed from kernel as it might lead to SMMU faults and other memory issues. Fixes: 5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Clean buffers on remote invocation failuresEkansh Gupta
With current design, buffers and dma handles are not freed in case of remote invocation failures returned from DSP. This could result in buffer leakings and dma handle pointing to wrong memory in the fastrpc kernel. Adding changes to clean buffers and dma handles even when remote invocation to DSP returns failures. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Free DMA handles for RPC calls with no argumentsEkansh Gupta
The FDs for DMA handles to be freed is updated in fdlist by DSP over a remote call. This holds true even for remote calls with no arguments. To handle this, get_args and put_args are needed to be called for remote calls with no arguments also as fdlist is allocated in get_args and FDs updated in fdlist is freed in put_args. Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Reset metadata buffer to avoid incorrect freeEkansh Gupta
Metadata buffer is allocated during get_args for any remote call. This buffer carries buffers, fdlists and other payload information for the call. If the buffer is not reset, put_args might find some garbage FDs in the fdlist which might have an existing mapping in the list. This could result in improper freeing of FD map when DSP might still be using the buffer. Added change to reset the metadata buffer after allocation. Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()Gustavo A. R. Silva
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). While there, use struct_size() helper, instead of the open-coded version, to calculate the size for the allocation of the whole flexible structure, including of course, the flexible-array member. This code was found with the help of Coccinelle, and audited and fixed manually. Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Reviewed-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/ZSRw6RNi3Crhd32H@work Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-10-16soc: qcom: pmic_glink: fix connector type to be DisplayPortDmitry Baryshkov
As it was pointed out by Simon Ser, the DRM_MODE_CONNECTOR_USB connector is reserved for the GUD devices. Other drivers (i915, amdgpu) use DRM_MODE_CONNECTOR_DisplayPort even if the DP stream is handled by the USB-C altmode. While we are still working on implementing the proper way to let userspace know that the DP is wrapped into USB-C, change connector type to be DRM_MODE_CONNECTOR_DisplayPort. Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support") Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Simon Ser <contact@emersion.fr> Link: https://lore.kernel.org/r/20231010225229.77027-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-10-16drm/msm/a7xx: actually use a7xx state registersDmitry Baryshkov
Make a6xx_get_registers() use a7xx registers instead of a6xx ones if the detected Adreno is from the A7xx family. Fixes: e997ae5f45ca ("drm/msm/a6xx: Mostly implement A7xx gpu_state") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562233/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16drm/msm/dpu: enable writeback on SM8550Neil Armstrong
Enable WB2 hardware block, enabling writeback support on this platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562328/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16drm/msm/dpu: sm8550: remove unused VIG and DMA clock controls entriesNeil Armstrong
The SM8550 has the SSPP clk_ctrl in the SSPP registers, remove the duplicate clock controls from the MDP top. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562330/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16drm/msm/dpu: move setup_force_clk_ctrl handling into plane and wbNeil Armstrong
Now SSPP and WB can have setup_force_clk_ctrl() ops, it's simpler to call them from the plane and wb code and call into the mdp ops if not present. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562325/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16drm/msm/dpu: add setup_clk_force_ctrl() op to sspp & wbNeil Armstrong
Starting from SM8550, the SSPP & WB clock controls are moved the SSPP and WB register range, as it's called "VBIF_CLK_SPLIT" downstream. Implement setup_clk_force_ctrl() only starting from major version 9 which corresponds to SM8550 MDSS. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562322/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16drm/msm/dpu: create a dpu_hw_clk_force_ctrl() helperNeil Armstrong
Add an helper to setup the force clock control as it will be used in multiple HW files. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/562323/ Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-10-16soc: ti: k3-socinfo: Avoid overriding return valueNeha Malcom Francis
Avoid overriding the return value and make sure the right error code is reflected. If the part is none of the identified list present in k3_soc_ids[], return -ENODEV. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20231016101608.993921-3-n-francis@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-10-16soc: ti: k3-socinfo: Fix typo in bitfield documentationNeha Malcom Francis
Fix documentation that indicates wrong bit. Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Link: https://lore.kernel.org/r/20231016101608.993921-2-n-francis@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-10-16drm/i915/pci: Clean up zero initializersVille Syrjälä
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012122442.15718-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-16drm/i915/hdcp: Clean up zero initializersVille Syrjälä
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012122442.15718-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-16drm/i915/display: Clean up zero initializersVille Syrjälä
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012122442.15718-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-16drm/i915: Retry gtt fault when out of fence registersVille Syrjälä
If we can't find a free fence register to handle a fault in the GMADR range just return VM_FAULT_NOPAGE without populating the PTE so that userspace will retry the access and trigger another fault. Eventually we should find a free fence and the fault will get properly handled. A further improvement idea might be to reserve a fence (or one per CPU?) for the express purpose of handling faults without having to retry. But that would require some additional work. Looks like this may have gotten broken originally by commit 39965b376601 ("drm/i915: don't trash the gtt when running out of fences") as that changed the errno to -EDEADLK which wasn't handle by the gtt fault code either. But later in commit 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression") I changed it again to -ENOBUFS as -EDEADLK was now getting used for the ww mutex dance. So this fix only makes sense after that last commit. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9479 Fixes: 2feeb52859fc ("drm/i915/gt: Fix -EDEADLK handling regression") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012132801.16292-1-ville.syrjala@linux.intel.com Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:16:49 +0000