summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-25Merge tag 'ti-driver-soc-for-v6.7' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.7 - Generic fixups: Convert to platform remove callback returning void - ti_sci: Minor fixups and mark driver as non-removable - k3-socinfo: Documentation fixups, cosmetic fixups - knav_qmss_queue: Optimize with device_get_match_data Signed-off-by: Nishanth Menon <nm@ti.com> * tag 'ti-driver-soc-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() soc/ti: wkup_m3_ipc: Convert to platform remove callback returning void soc/ti: smartreflex: Convert to platform remove callback returning void soc/ti: pruss: Convert to platform remove callback returning void soc/ti: pm33xx: Convert to platform remove callback returning void soc/ti: knav_qmss_queue: Convert to platform remove callback returning void soc/ti: knav_dma: Convert to platform remove callback returning void soc/ti: k3-ringacc: Convert to platform remove callback returning void firmware: ti_sci: Mark driver as non removable firmware: ti_sci: refactor deprecated strncpy firmware: ti_sci: Use list_for_each_entry() helper Link: https://lore.kernel.org/r/20231018165226.33x5cjn5jmgnm3di@magnolia Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-10-25Merge tag 'devfreq-next-for-6.7' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Merge devfreq updates for v6.7 from Chanwoo Choi: " Detailed description for this pull request: 1. Update devfreq core - Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs to support the specific device like UFS which handle the multiple clocks through OPP (Operationg Performance Point) framework. 2. Update the devfreq / devfreq-event drivers - Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver. : Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type. : Covert devicetree bidning document format to yaml. : DFI is a unit which is suitable for measuring DDR utilization for the DDR frequency scaling driver. Add perf support feature to rockchip-dfi.c to extend DFI usage. The perf support has been tested on a RK3568 and a RK3399. - Protect the OPP handling code in critical section because the voltage of shared OPP might be changed by multiple drivers on Mediatek CCI devfreq driver. - Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver." * tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (26 commits) dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml PM / devfreq: rockchip-dfi: add support for RK3588 PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers PM / devfreq: rockchip-dfi: make register stride SoC specific PM / devfreq: rockchip-dfi: Add perf support PM / devfreq: rockchip-dfi: give variable a better name PM / devfreq: rockchip-dfi: Prepare for multiple users PM / devfreq: rockchip-dfi: Pass private data struct to internal functions PM / devfreq: rockchip-dfi: Handle LPDDR4X PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly PM / devfreq: rockchip-dfi: Add RK3568 support PM / devfreq: rockchip-dfi: Clean up DDR type register defines PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines PM / devfreq: rockchip-dfi: introduce channel mask PM / devfreq: rockchip-dfi: Use free running counter PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target() PM / devfreq: exynos-ppmu: Use device_get_match_data() PM / devfreq: rockchip-dfi: dfi store raw values in counter struct ...
2023-10-25Merge tag 'opp-updates-6.7' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge OPP (operating performance points) updates for 6.7 from Viresh Kumar: "- Extend support for the opp-level beyond required-opps (Ulf Hansson). - Add dev_pm_opp_find_level_floor() (Krishna chaitanya chundru). - dt-bindings: Allow opp-peak-kBpsfor kryo CPUs, support Qualcomm Krait SoCs and document named opp-microvolt property (Bjorn Andersson, Dmitry Baryshkov and Christian Marangi). - Fix -Wunsequenced warning (Nathan Chancellor). - General cleanup (Viresh Kumar)." * tag 'opp-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property OPP: No need to defer probe from _opp_attach_genpd() OPP: Remove genpd_virt_dev_lock OPP: Reorder code in _opp_set_required_opps_genpd() OPP: Add _link_required_opps() to avoid code duplication OPP: Fix formatting of if/else block dt-bindings: opp: opp-v2-kryo-cpu: support Qualcomm Krait SoCs OPP: Fix -Wunsequenced in _of_add_opp_table_v1() dt-bindings: opp: opp-v2-kryo-cpu: Allow opp-peak-kBps OPP: debugfs: Fix warning with W=1 builds OPP: Remove doc style comments for internal routines OPP: Add dev_pm_opp_find_level_floor() OPP: Extend support for the opp-level beyond required-opps OPP: Switch to use dev_pm_domain_set_performance_state() OPP: Extend dev_pm_opp_data with a level OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility PM: domains: Implement the ->set_performance_state() callback for genpd PM: domains: Introduce dev_pm_domain_set_performance_state()
2023-10-25drm/i915/pmu: Check if pmu is closed before stopping eventUmesh Nerlige Ramappa
When the driver unbinds, pmu is unregistered and i915->uabi_engines is set to RB_ROOT. Due to this, when i915 PMU tries to stop the engine events, it issues a warn_on because engine lookup fails. All perf hooks are taking care of this using a pmu->closed flag that is set when PMU unregisters. The stop event seems to have been left out. Check for pmu->closed in pmu_event_stop as well. Based on discussion here - https://patchwork.freedesktop.org/patch/492079/?series=105790&rev=2 v2: s/is/if/ in commit title v3: Add fixes tag and cc stable Cc: <stable@vger.kernel.org> # v5.11+ Fixes: b00bccb3f0bb ("drm/i915/pmu: Handle PCI unbind") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020152441.3764850-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 31f6a06f0c543b43a38fab10f39e5fc45ad62aa2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-10-25regulator: fixed: add support for under-voltage IRQOleksij Rempel
Add interrupt support for under-voltage notification. This functionality can be used on systems capable to detect under-voltage state and having enough capacity to let the SoC do some emergency preparation. This change enforce default policy to shutdown system as soon as interrupt is triggered. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20231025084614.3092295-6-o.rempel@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-10-25drm/i915/mcr: Hold GT forcewake during steering operationsMatt Roper
The steering control and semaphore registers are inside an "always on" power domain with respect to RC6. However there are some issues if higher-level platform sleep states are entering/exiting at the same time these registers are accessed. Grabbing GT forcewake and holding it over the entire lock/steer/unlock cycle ensures that those sleep states have been fully exited before we access these registers. This is expected to become a formally documented/numbered workaround soon. Note that this patch alone isn't expected to have an immediately noticeable impact on MCR (mis)behavior; an upcoming pcode firmware update will also be necessary to provide the other half of this workaround. v2: - Move the forcewake inside the Xe_LPG-specific IP version check. This should only be necessary on platforms that have a steering semaphore. Fixes: 3100240bf846 ("drm/i915/mtl: Add hardware-level lock for steering") Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231019170241.2102037-2-matthew.d.roper@intel.com (cherry picked from commit 8fa1c7cd1fe9cdfc426a603e1f1eecd3f463c487) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-10-25Merge tag 'thermal-v6.7-rc1' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Merge thermal control (ARM drivers mostly) updates for 6.7-rc1 from Daniel Lezcano: "- Add support for Mediatek LVTS MT8192 driver along with the suspend/resume routines (Balsam Chihi) - Fix probe for THERMAL_V2 for the Mediatek LVTS driver (Markus Schneider-Pargmann) - Remove duplicate error message in the max76620 driver when thermal_of_zone_register() fails as the sub routine already show one (Thierry Reding) - Add i.MX7D compatible bindings to fix a warning from dtbs_check for the imx6ul platform (Alexander Stein) - Add sa8775p compatible for the QCom tsens driver (Priyansh Jain) - Fix error check in lvts_debugfs_init() which is checking against NULL instead of PTR_ERR() on the LVTS Mediatek driver (Minjie Du) - Remove unused variable in the thermal/tools (Kuan-Wei Chiu) - Document the imx8dl thermal sensor (Fabio Estevam) - Add variable names in callback prototypes to prevent warning from checkpatch.pl for the imx8mm driver (Bragatheswaran Manickavel) - Add missing unevaluatedProperties on child node schemas for tegra124 (Rob Herring) - Add mt7988 support for the Mediatek LVTS driver (Frank Wunderlich)" * tag 'thermal-v6.7-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/qcom/tsens: Drop ops_v0_1 thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation thermal/drivers/mediatek/lvts_thermal: Add mt8192 support thermal/drivers/mediatek/lvts_thermal: Add suspend and resume dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192 thermal/drivers/mediatek: Fix probe for THERMAL_V2 thermal/drivers/max77620: Remove duplicate error message dt-bindings: timer: add imx7d compatible dt-bindings: net: microchip: Allow nvmem-cell usage dt-bindings: imx-thermal: Add #thermal-sensor-cells property dt-bindings: thermal: tsens: Add sa8775p compatible thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init() tools/thermal: Remove unused 'mds' and 'nrhandler' variables dt-bindings: thermal: fsl,scu-thermal: Document imx8dl thermal/drivers/imx8mm_thermal: Fix function pointer declaration by adding identifier name dt-bindings: thermal: nvidia,tegra124-soctherm: Add missing unevaluatedProperties on child node schemas thermal/drivers/mediatek/lvts_thermal: Add mt7988 support thermal/drivers/mediatek/lvts_thermal: Make coeff configurable dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988 dt-bindings: thermal: mediatek: Add mt7988 lvts compatible
2023-10-25Merge tag 'cpufreq-arm-updates-6.7' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.7 from Viresh Kumar: "- Add support for several Qualcomm SoC versions and other similar changes (Christian Marangi, Dmitry Baryshkov, Luca Weiss, Neil Armstrong, Richard Acayan, Robert Marko, Rohit Agarwal, Stephan Gerhold and Varadarajan Narayanan). - Cleanups to the tegra cpufreq driver (Sumit Gupta). - Use of_property_read_reg() to parse "reg" in pmac32 driver (Rob Herring). - Add support for TI's am62p5 Soc (Bryan Brattlof). - Make ARM_BRCMSTB_AVS_CPUFREQ depends on !ARM_SCMI_CPUFREQ (Florian Fainelli). - Update Kconfig to mention i.MX7 as well (Alexander Stein)." * tag 'cpufreq-arm-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (25 commits) dt-bindings: cpufreq: qcom-hw: document SM8650 CPUFREQ Hardware cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DT cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: drop pvs_ver for format a fuses dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for IPQ6018 dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ6018 cpufreq: qcom-nvmem: Add MSM8909 cpufreq: qcom-nvmem: Simplify driver data allocation dt-bindings: cpufreq: cpufreq-qcom-hw: Add SDX75 compatible cpufreq: ARM_BRCMSTB_AVS_CPUFREQ cannot be used with ARM_SCMI_CPUFREQ cpufreq: ti-cpufreq: Add opp support for am62p5 SoCs cpufreq: dt-platdev: add am62p5 to blocklist cpufreq: tegra194: remove redundant AND with cpu_online_mask cpufreq: tegra194: use refclk delta based loop instead of udelay cpufreq: tegra194: save CPU data to avoid repeated SMP calls dt-bindings: cpufreq: cpufreq-qcom-hw: add SDM670 compatible dt-bindings: cpufreq: qcom-nvmem: Document MSM8909 cpufreq: dt: platdev: Add MSM8909 to blocklist ...
2023-10-25perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UIDRaag Jadav
Convert manual _UID references to use the standard ACPI helpers. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-25Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition"Kalle Valo
This reverts commit e149353e6562f3e3246f75dfc4cca6a0cc5b4efc. The commit caused QCA6390 hw2.0 firmware WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 to crash during disconnect: [71990.787525] ath11k_pci 0000:72:00.0: firmware crashed: MHI_CB_EE_RDDM Closes: https://lore.kernel.org/all/87edhu3550.fsf@kernel.org/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20231023164120.651151-1-kvalo@kernel.org
2023-10-25wifi: ath12k: Introduce and use ath12k_sta_to_arsta()Jeff Johnson
Currently, the logic to return an ath12k_sta pointer, given a ieee80211_sta pointer, uses typecasting throughout the driver. In general, conversion functions are preferable to typecasting since using a conversion function allows the compiler to validate the types of both the input and output parameters. ath12k already defines a conversion function ath12k_vif_to_arvif() for a similar conversion. So introduce ath12k_sta_to_arsta() for this use case, and convert all of the existing typecasting to use this function. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019-upstream-ath12k_sta_to_arsta-v1-1-06f06f693338@quicinc.com
2023-10-25cpufreq: arm: Kconfig: Add i.MX7 to supported SoC for ARM_IMX_CPUFREQ_DTAlexander Stein
Since commit a5a9dffcc903 ("ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading") i.MX7 uses this driver as well. Add it to the description text. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: add support for IPQ8064Christian Marangi
IPQ8064 comes in 3 families: * IPQ8062 up to 1.0GHz * IPQ8064/IPQ8066/IPQ8068 up to 1.4GHz * IPQ8065/IPQ8069 up to 1.7Ghz So, in order to be able to support one OPP table, add support for IPQ8064 family based of SMEM SoC ID-s and correctly set the version so opp-supported-hw can be correctly used. Bit are set with the following logic: * IPQ8062 BIT 0 * IPQ8064/IPQ8066/IPQ8068 BIT 1 * IPQ8065/IPQ8069 BIT 2 speed is never fused, only pvs values are fused. IPQ806x SoC doesn't have pvs_version so we drop and we use the new pattern: opp-microvolt-speed0-pvs<PSV_VALUE> Example: - for ipq8062 psv2 opp-microvolt-speed0-pvs2 = < 925000 878750 971250> Fixes: a8811ec764f9 ("cpufreq: qcom: Add support for krait based socs") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpuDmitry Baryshkov
the qcom-cpufreq-nvmem driver attempts to support both Qualcomm Kryo (newer 64-bit ARMv8 cores) and Krait (older 32-bit ARMv7 cores). It makes no sense to use 'operating-points-v2-kryo-cpu' compatibility node for the Krait cores. Add support for 'operating-points-v2-krait-cpu' compatibility string. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: drop pvs_ver for format a fusesDmitry Baryshkov
The fuses used on msm8960 / apq8064 / ipq806x families of devices do not have the pvs version. Drop this argument from parsing function. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: add support for IPQ6018Robert Marko
IPQ6018 SoC series comes in multiple SKU-s, and not all of them support high frequency OPP points. SoC itself does however have a single bit in QFPROM to indicate the CPU speed-bin. That bit is used to indicate frequency limit of 1.5GHz, but that alone is not enough as IPQ6000 only goes up to 1.2GHz, but SMEM ID can be used to limit it further. IPQ6018 compatible is blacklisted from DT platdev as the cpufreq device will get created by NVMEM CPUFreq driver. Signed-off-by: Robert Marko <robimarko@gmail.com> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25drm/logicvc: Kconfig: select REGMAP and REGMAP_MMIOSui Jingfeng
drm/logicvc driver is depend on REGMAP and REGMAP_MMIO, should select this two kconfig option, otherwise the driver failed to compile on platform without REGMAP_MMIO selected: ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/gpu/drm/logicvc/logicvc-drm.ko] undefined! make[1]: *** [scripts/Makefile.modpost:136: Module.symvers] Error 1 make: *** [Makefile:1978: modpost] Error 2 Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Fixes: efeeaefe9be5 ("drm: Add support for the LogiCVC display controller") Link: https://patchwork.freedesktop.org/patch/msgid/20230608024207.581401-1-suijingfeng@loongson.cn Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2023-10-25wifi: ath12k: fix htt mlo-offset event lockingJohan Hovold
The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # v6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019113650.9060-3-johan+linaro@kernel.org
2023-10-25wifi: ath12k: fix dfs-radar and temperature event lockingJohan Hovold
The ath12k active pdevs are protected by RCU but the DFS-radar and temperature event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as RCU read-side critical sections to avoid any potential use-after-free issues. Note that the temperature event handler looks like a place holder currently but would still trigger an RCU lockdep splat. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # v6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019113650.9060-2-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix gtk offload status event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload") Cc: stable@vger.kernel.org # 5.18 Cc: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019155342.31631-1-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix htt pktlog lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019112521.2071-1-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix dfs radar event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org # 5.6 Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019153115.26401-3-johan+linaro@kernel.org
2023-10-25wifi: ath11k: fix temperature event lockingJohan Hovold
The ath11k active pdevs are protected by RCU but the temperature event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section as reported by RCU lockdep: ============================= WARNING: suspicious RCU usage 6.6.0-rc6 #7 Not tainted ----------------------------- drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/0. ... Call trace: ... lockdep_rcu_suspicious+0x16c/0x22c ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k] ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k] ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k] Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: a41d10348b01 ("ath11k: add thermal sensor device support") Cc: stable@vger.kernel.org # 5.7 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
2023-10-25wifi: ath12k: rename the sc naming convention to abKarthikeyan Periyasamy
In PCI and HAL interface layer module, the identifier sc is used to represent an instance of ath12k_base structure. However, within ath12k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of sc to ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231018153008.29820-3-quic_periyasa@quicinc.com
2023-10-25wifi: ath12k: rename the wmi_sc naming convention to wmi_abKarthikeyan Periyasamy
In WMI layer module, the identifier wmi_sc is used to represent an instance of ath12k_wmi_base structure. However, within ath12k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of wmi_sc to wmi_ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231018153008.29820-2-quic_periyasa@quicinc.com
2023-10-25wifi: ath11k: add firmware-2.bin supportAnilkumar Kolli
Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath11k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath11k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath11k_fw_features is empty, the patches adding features will add the flags. With AHB devices there's no amss.bin or m3.bin, so no changes in how AHB firmware files are used. But AHB devices can use future additions to the meta data, for example in enum ath11k_fw_features. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Co-developed-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230727100430.3603551-4-kvalo@kernel.org
2023-10-25wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()Kalle Valo
Simple refactoring to make it easier to add firmware-2.bin support in the following patch. Earlier ath11k_qmi_m3_load() supported changing m3.bin contents while ath11k is running. But that's not going to actually work, m3.bin is supposed to be the same during the lifetime of ath11k, for example we don't support changing the firmware capabilities on the fly. Due to this ath11k requests m3.bin firmware file first and only then checks m3_mem->vaddr, so we are basically requesting the firmware file even if it's not needed. Reverse the code so that m3_mem buffer is checked first, and only if it doesn't exist, then m3.bin is requested from user space. Checking for m3_mem->size is redundant when m3_mem->vaddr is NULL, we would not be able to use the buffer in that case. So remove the check for size. Simplify the exit handling and use 'goto out'. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20230727100430.3603551-3-kvalo@kernel.org
2023-10-25platform/x86: wmi: Decouple WMI device removal from wmi_block_listArmin Wolf
Use device_for_each_child_reverse() to find and unregister WMI devices belonging to a WMI bus device instead of iterating thru the entire wmi_block_list. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231020211005.38216-6-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25platform/x86: wmi: Fix opening of char deviceArmin Wolf
Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver. Fixes: 44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231020211005.38216-5-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25platform/x86: wmi: Fix probe failure when failing to register WMI devicesArmin Wolf
When a WMI device besides the first one somehow fails to register, retval is returned while still containing a negative error code. This causes the ACPI device fail to probe, leaving behind zombie WMI devices leading to various errors later. Handle the single error path separately and return 0 unconditionally after trying to register all WMI devices to solve the issue. Also continue to register WMI devices even if some fail to allocate memory. Fixes: 6ee50aaa9a20 ("platform/x86: wmi: Instantiate all devices before adding them") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25platform/x86: wmi: Fix refcounting of WMI devices in legacy functionsArmin Wolf
Until now, legacy GUID-based functions where using find_guid() when searching for WMI devices, which did no refcounting on the returned WMI device. This meant that the WMI device could disappear at any moment, potentially leading to various errors. Fix this by using bus_find_device() which returns an actual reference to the found WMI device. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231020211005.38216-3-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25platform/x86: wmi: Decouple probe deferring from wmi_block_listArmin Wolf
Many aggregate WMI drivers do not use -EPROBE_DEFER when they cannot find a WMI device during probe, instead they require all WMI devices associated with an platform device to become available at once. This is currently achieved by adding those WMI devices to the wmi_block_list before they are registered, which is then used by the deprecated GUID-based functions to search for WMI devices. Replace this approach with a device link which defers probing of the WMI device until the associated platform device has finished probing (and has registered all WMI devices). New aggregate WMI drivers should not rely on this behaviour. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231020211005.38216-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25amd/pds_core: core: No need for Null pointer check before kfreeBragatheswaran Manickavel
kfree()/vfree() internally perform NULL check on the pointer handed to it and take no action if it indeed is NULL. Hence there is no need for a pre-check of the memory pointer before handing it to kfree()/vfree(). Issue reported by ifnullfree.cocci Coccinelle semantic patch script. Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25platform/x86/amd/hsmp: Fix iomem handlingArmin Wolf
Since the metrics table is marked as io memory, use memcpy_fromio() when copying its contents. Compile-tested only. Fixes: 5150542b8ec5 ("platform/x86/amd/hsmp: add support for metrics tbl") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20231019135122.21774-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25platform/x86: asus-wmi: Do not report brightness up/down keys when also ↵Hans de Goede
reported by acpi_video For a long time now the acpi_video driver reports evdev brightness up/down key events for the brightness hotkeys on most (non ancient) laptops. asus-wmi also reports evdev brightness up/down key events for these keys leading to each press being reported twice and e.g. GNOME increasing the brightness by 2 steps instead of 1 step. Use the acpi_video_handles_brightness_key_presses() helper to detect if acpi_video is reporting brightness key-presses and if it is then don't report the same events also from the asus-wmi driver. Note there is a chance that this may lead to regressions where the brightness hotkeys stop working because they are not actually reported by the acpi_video driver. Unfortunately the only way to find out if this is a problem is to try. To at least avoid regressions on old hw using the eeepc-wmi driver, implement this as a key filter in asus-nb-wmi so that the eeepc-wmi driver is not affected. Reported-by: James John <me@donjajo.com> Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b037cf@donjajo.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231021094841.7419-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-10-25cpufreq: qcom-nvmem: Add MSM8909Stephan Gerhold
When the MSM8909 SoC is used together with the PM8909 PMIC the primary power supply for the CPU (VDD_APC) is shared with other components to the SoC, namely the VDD_CX power domain typically supplied by the PM8909 S1 regulator. This means that all votes for necessary performance states go via the RPM firmware which collects the requirements from all the processors in the SoC. The RPM firmware then chooses the actual voltage based on the performance states ("corners"), depending on calibration values in the NVMEM and other factors. The MSM8909 SoC is also sometimes used with the PM8916 or PM660 PMIC. In that case there is a dedicated regulator connected to VDD_APC and Linux is responsible to do adaptive voltage scaling using CPR (similar to the existing code for QCS404). This difference can be described in the device tree, by either assigning the CPU a power domain from RPMPD or from the CPR driver. Describe this using "perf" as generic power domain name, which is also used already for SCMI based platforms. Also add a simple function that reads the speedbin from a NVMEM cell and sets it as-is for opp-supported-hw. The actual bit position can be described in the device tree without additional driver changes. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> [ Viresh: Fixed rebase conflict. ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25cpufreq: qcom-nvmem: Simplify driver data allocationStephan Gerhold
Simplify the allocation and cleanup of driver data by using devm together with a flexible array. Prepare for adding additional per-CPU data by defining a struct qcom_cpufreq_drv_cpu instead of storing the opp_tokens directly. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-10-25wifi: rtw89: cleanup firmware elements parsingDmitry Antipov
When compiling with clang-18, I've noticed the following: drivers/net/wireless/realtek/rtw89/fw.c:389:28: warning: cast to smaller integer type 'enum rtw89_fw_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] 389 | enum rtw89_fw_type type = (enum rtw89_fw_type)data; | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/fw.c:569:13: warning: cast to smaller integer type 'enum rtw89_rf_path' from 'const void *' [-Wvoid-pointer-to-enum-cast] 569 | rf_path = (enum rtw89_rf_path)data; | ^~~~~~~~~~~~~~~~~~~~~~~~ So avoid brutal everything-to-const-void-and-back casts, introduce 'union rtw89_fw_element_arg' to pass parameters to element handler callbacks, and adjust all of the related bits accordingly. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231020040940.33154-1-dmantipov@yandex.ru
2023-10-25wifi: rt2x00: rework MT7620 PA/LNA RF calibrationShiji Yang
1. Move MT7620 PA/LNA calibration code to dedicated functions. 2. For external PA/LNA devices, restore RF and BBP registers before R-Calibration. 3. Do Rx DCOC calibration again before RXIQ calibration. 4. Add some missing LNA related registers' initialization. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB0315979F92DC563019B8F238BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-10-25wifi: rt2x00: rework MT7620 channel config functionShiji Yang
1. Move the channel configuration code from rt2800_vco_calibration() to the rt2800_config_channel(). 2. Use MT7620 SoC specific AGC initial LNA value instead of the RT5592's value. 3. BBP{195,196} pairing write has been replaced with rt2800_bbp_glrt_write() to reduce redundant code. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB0315622A4340BFFA530B1B86BCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-10-25wifi: rt2x00: improve MT7620 register initializationShiji Yang
1. Do not hard reset the BBP. We can use soft reset instead. This change has some help to the calibration failure issue. 2. Enable falling back to legacy rate from the HT/RTS rate by setting the HT_FBK_TO_LEGACY register. 3. Implement MCS rate specific maximum PSDU size. It can improve the transmission quality under the low RSSI condition. 4. Set BBP_84 register value to 0x19. This is used for extension channel overlapping IOT. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/TYAP286MB031553CCD4B7A3B89C85935DBCD4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
2023-10-25net: hns3: add some link modes for hisilicon deviceHao Chen
Add HCLGE_SUPPORT_50G_R1_BIT and HCLGE_SUPPORT_100G_R2_BIT two capability bits and Corresponding link modes. Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25net: dsa: microchip: ksz9477: add Wake on LAN supportOleksij Rempel
Add WoL support for KSZ9477 family of switches. This code was tested on KSZ8563 chip. KSZ9477 family of switches supports multiple PHY events: - wake on Link Up - wake on Energy Detect. Since current UAPI can't differentiate between this PHY events, map all of them to WAKE_PHY. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25net: dsa: microchip: use wakeup-source DT property to enable PME outputOleksij Rempel
KSZ switches with WoL support signals wake event over PME pin. If this pin is attached to some external PMIC or System Controller can't be described as GPIO, the only way to describe it in the devicetree is to use wakeup-source property. So, add support for this property and enable PME switch output if this property is present. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25net: dsa: microchip: Add missing MAC address register offset for ksz8863Oleksij Rempel
Add the missing offset for the global MAC address register (REG_SW_MAC_ADDR) for the ksz8863 family of switches. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-25Merge tag 'amd-drm-next-6.7-2023-10-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.7-2023-10-20: amdgpu: - SMU 13 updates - UMSCH updates - DC MPO fixes - RAS updates - MES 11 fixes - Fix possible memory leaks in error pathes - GC 11.5 fixes - Kernel doc updates - PSP updates - APU IMU fixes - Misc code cleanups - SMU 11 fixes - OD fix - Frame size warning fixes - SR-IOV fixes - NBIO 7.11 updates - NBIO 7.7 updates - XGMI fixes - devcoredump updates amdkfd: - Misc code cleanups - SVM fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020195043.4937-1-alexander.deucher@amd.com
2023-10-24s390/qeth: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect new_entry->dbf_name to be NUL-terminated based on its use with strcmp(): | if (strcmp(entry->dbf_name, name) == 0) { Moreover, NUL-padding is not required as new_entry is kzalloc'd just before this assignment: | new_entry = kzalloc(sizeof(struct qeth_dbf_entry), GFP_KERNEL); ... rendering any future NUL-byte assignments (like the ones strncpy() does) redundant. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Tested-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-qeth_core_main-c-v1-1-e7ce65454446@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24s390/ctcm: replace deprecated strncpy with strscpyJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [1] and as such we should prefer more robust and less ambiguous string interfaces. We expect chid to be NUL-terminated based on its use with format strings: CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO, "%s(%s) %s", CTCM_FUNTAIL, chid, ok ? "OK" : "failed"); Moreover, NUL-padding is not required as it is _only_ used in this one instance with a format string. Considering the above, a suitable replacement is `strscpy` [2] due to the fact that it guarantees NUL-termination on the destination buffer without unnecessarily NUL-padding. We can also drop the +1 from chid's declaration as we no longer need to be cautious about leaving a spot for a NUL-byte. Let's use the more idiomatic strscpy usage of (dest, src, sizeof(dest)) as this more closely ties the destination buffer to the length. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2] Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Tested-by: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-net-ctcm_main-c-v1-1-265db6e78165@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24net: ethernet: mtk_wed: remove wo pointer in wo_r32/wo_w32 signatureLorenzo Bianconi
wo pointer is no longer used in wo_r32 and wo_w32 routines so get rid of it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/530537db0872f7523deff21f0a5dfdd9b75fdc9d.1698098459.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-24net: ethernet: mtk_wed: fix firmware loading for MT7986 SoCLorenzo Bianconi
The WED mcu firmware does not contain all the memory regions defined in the dts reserved_memory node (e.g. MT7986 WED firmware does not contain cpu-boot region). Reverse the mtk_wed_mcu_run_firmware() logic to check all the fw sections are defined in the dts reserved_memory node. Fixes: c6d961aeaa77 ("net: ethernet: mtk_wed: move mem_region array out of mtk_wed_mcu_load_firmware") Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/d983cbfe8ea562fef9264de8f0c501f7d5705bd5.1698098381.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:40:01 +0000