summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-10-14iwlagn: update beacon smarterJohannes Berg
Updating the beacon every time right after one was transmitted is pointless, most of the time we might not even have to update it. We will update it every time it changes, which includes from set_tim(), a callback iwlwifi didn't implement so far. This also reduces latency for clients, previously we would update the beacon right after the previous one was transmitted, and then a TIM change would only take effect after that again -- updating the beacon right after the TIM changes makes the TIM change go out to the air faster. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add "echo test" command to debugfsWey-Yi Guy
For command queue testing, add "echo test" to debugfs Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: check rf kill in queue stuckWey-Yi Guy
check the RF KILL flag in queue stuck watch dog function Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add "echo" test when command queue stuckWey-Yi Guy
When detect command queue stuck, instead of reload the firmware do the "echo" test to make sure it is really stuck before reload Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add WARN if tx cmd complete come back lateWey-Yi Guy
For error condition, STATUS_HCMD_ACTIVE already got clear before receive tx cmd complete, give warning Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add REPLY_ECHO host commandWey-Yi Guy
Add "echo" host command for testing and drebugging to make sure uCode still responding Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14iwlagn: add cmd queue pointer info when timeoutWey-Yi Guy
When detect cmd queue time out, display the current read/write pointer Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14pata_efar: fix register naming used in efar_set_piomode()Bartlomiej Zolnierkiewicz
Rename 'idetm_port' and 'idetm_data' variables to 'master_port' and 'master_data' respectively to match register naming used in efar_set_dmamode() and in ata_piix.c. Fix efar_set_piomode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_rdc: add Power Management supportBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14ata_piix: unify code for programming PIO and MWDMA timingsBartlomiej Zolnierkiewicz
Besides making things noticably simpler it results in ~2% decrease in the driver LOC count and also ~2% decrease in the driver binary size (as measured on x86-32). Fix piix_set_piomode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14ata_piix: SITRE handling fixBartlomiej Zolnierkiewicz
Set SITRE (separate slave timing register) bit also in master-only configurations to match other PIIX-alike drivers and make further changes easier. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14libata: make ata_sff_data_xfer_noirq() work with 32-bit PIOBartlomiej Zolnierkiewicz
Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq() so the latter can be also used for host controllers supporting 32-bit PIO operations. It is a completely safe thing to do because if 32-bit PIO is not supported or enabled ata_sff_data_xfer32() will fallback to a standard method. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_artop: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (aec62xx) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sl82c105: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (sl82c105) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_pdc2027x: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (pdc202xx_new) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_legacy: use PIO mask definesBartlomiej Zolnierkiewicz
Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_legacy: unify QDI ->set_piomode methodsBartlomiej Zolnierkiewicz
Add controller type field to struct legacy_data and then use it to merge together all ->set_piomode methods for QDI controllers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14libata: remove no longer needed pata_qdi driverBartlomiej Zolnierkiewicz
QDI65x0 controllers are fully supported by pata_legacy driver so remove no longer needed pata_qdi driver. Leave PATA_QDI config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_qdi driver. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_it8213: fix register naming used in it8213_set_piomode()Bartlomiej Zolnierkiewicz
Rename 'idetm_port' and 'idetm_data' variables to 'master_port' and 'master_data' respectively to match register naming used in it8213_set_dmamode() and in ata_piix.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_it8213: add UDMA100 and UDMA133 supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. IDE's it8213 host driver has been supporting those modes (per official documentation) since the initial driver's merge on Feb 7 2007 (commit 9c6712c0 "ide: add it8213 IDE driver"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_rdc: parallel scanning needs an extra lockingBartlomiej Zolnierkiewicz
This is similar change as commit 60c3be3 ("ata_piix: parallel scanning on PATA needs an extra locking") for ata_piix host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_via: add via_fixup()Bartlomiej Zolnierkiewicz
* Fix via_init_one() to enable clock on 66 MHz devices (bug introduced in commit 460f531 "pata_via: store UDMA masks in via_isa_bridges table"). * Factor out common code from via_[re]init_one() to via_fixup(). Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14libata: ata_timing_compute() fixupBartlomiej Zolnierkiewicz
XFER_SW_DMA_0 mode should be excluded from the extended cycle timing computations. Acked-by: Alan Cox <alan@linux.intel.com> Noticed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_scc: add proper cable detection methodBartlomiej Zolnierkiewicz
Use standard ata_cable_80wire() method for the cable detection, as a bonus this allows us to use the default ->prereset method. Acked-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_arasan_cf: remove bogus to_platform_device() callsSergei Shtylyov
The suspend()/resume() methods already get the right 'struct device' to get the driver data from -- there's no need to get to the 'struct platform_device' that contains that 'struct device' just to call dev_get_drvdata()... Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_atiixp: add proper ->prereset methodBartlomiej Zolnierkiewicz
Fixes PCI access before PCI resources are allocated. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_serverworks: add serverworks_fixup()Bartlomiej Zolnierkiewicz
Factor out common code from serverworks_[re]init_one() to serverworks_fixup(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_serverworks: cleanup cable detectionBartlomiej Zolnierkiewicz
Merge identical cable routines for Dell and Sun systems into common oem_cable() one. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_serverworks: use standard cable detection methodsBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_cmd64x: documentation fixBartlomiej Zolnierkiewicz
Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_ali: fix "Satelite" typoBartlomiej Zolnierkiewicz
Cosmetic fix but thanks to it pata_ali's DMI table now matches alim15x3's one. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_cs5535: no need to program PIO0 timings during device initBartlomiej Zolnierkiewicz
Core libata code takes care of it nowadays. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_cmd64x: add cmd64x_fixup()Bartlomiej Zolnierkiewicz
Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup(). Remove stale comment and fix a minor CodingStyle issue while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_hpt366: add hpt36x_find_mode() helperBartlomiej Zolnierkiewicz
Factor out code for finding the register programming information from hpt366_set_mode() to hpt36x_find_mode(). This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_artop: unify ->prereset methodsBartlomiej Zolnierkiewicz
* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets. * Fix ->prereset documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sc1200: do not use c99 style commentsBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_at91: call clk_put() on ata_host_activate() failureSergei Shtylyov
pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14libata: reduce ata_pci_[sff,bmdma]_init_one() sizeBartlomiej Zolnierkiewicz
Turn both helpers (which are used only during LLDs initialization time and thus are not performance sensitive) into wrappers around the new ata_pci_init_one() function, this cuts 20 LOC and saves ~1.1k of the output code size (x86-64): text data bss dec hex filename 21392 0 19 21411 53a3 drivers/ata/libata-sff.o.before 20256 0 19 20275 4f33 drivers/ata/libata-sff.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_cs5535: fix DRV_NAMEBartlomiej Zolnierkiewicz
.. and also a module description while at it. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sc1200: fix DRV_NAMEBartlomiej Zolnierkiewicz
Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sil680: minor CodingStyle fixupsBartlomiej Zolnierkiewicz
Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sil680: constify tablesBartlomiej Zolnierkiewicz
Constify tables in sil680_set_[pio,dma]mode(). Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sil680: documentation fixesBartlomiej Zolnierkiewicz
Fix documentation for sil680_sel[reg,dev]() and sil680_set_[pio,dma]mode(). Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14xen: Fix selfballooning and ensure it doesn't go too farDan Magenheimer
The balloon driver's "current_pages" is very different from totalram_pages. Self-ballooning needs to be driven by the latter. Also, Committed_AS doesn't account for pages used by the kernel so: 1) Add totalreserve_pages to Committed_AS for the normal target. 2) Enforce a floor for when there are little or no user-space threads using memory (e.g. single-user mode) to avoid OOMs. The floor function includes a "min_usable_mb" tuneable in case we discover later that the floor function is still too aggressive in some workloads, though likely it will not be needed. Changes since version 4: - change floor calculation so that it is not as aggressive; this version uses a piecewise linear function similar to minimum_target in the 2.6.18 balloon driver, but modified to add to totalreserve_pages instead of subtract from max_pfn, the 2.6.18 version causes OOMs on recent kernels because the kernel has expanded over time - change safety_margin to min_usable_mb and comment on its use - since committed_as does NOT include kernel space (and other reserved pages), totalreserve_pages is now added to committed_as. The result is less aggressive self-ballooning, but theoretically more appropriate. Changes since version 3: - missing include causes compile problem when CONFIG_FRONTSWAP is disabled - add comments after includes Changes since version 2: - missing include causes compile problem only on 32-bit Changes since version 1: - tuneable safety margin added [v5: avi.miller@oracle.com: still too aggressive, seeing some OOMs] [v4: konrad.wilk@oracle.com: fix compile when CONFIG_FRONTSWAP is disabled] [v3: guru.anbalagane@oracle.com: fix 32-bit compile] [v2: konrad.wilk@oracle.com: make safety margin tuneable] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> [v1: Altered description and added an extra include] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14xen/gntdev: Fix sleep-inside-spinlockDaniel De Graaf
BUG: sleeping function called from invalid context at /local/scratch/dariof/linux/kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 3256, name: qemu-dm 1 lock held by qemu-dm/3256: #0: (&(&priv->lock)->rlock){......}, at: [<ffffffff813223da>] gntdev_ioctl+0x2bd/0x4d5 Pid: 3256, comm: qemu-dm Tainted: G W 3.1.0-rc8+ #5 Call Trace: [<ffffffff81054594>] __might_sleep+0x131/0x135 [<ffffffff816bd64f>] mutex_lock_nested+0x25/0x45 [<ffffffff8131c7c8>] free_xenballooned_pages+0x20/0xb1 [<ffffffff8132194d>] gntdev_put_map+0xa8/0xdb [<ffffffff816be546>] ? _raw_spin_lock+0x71/0x7a [<ffffffff813223da>] ? gntdev_ioctl+0x2bd/0x4d5 [<ffffffff8132243c>] gntdev_ioctl+0x31f/0x4d5 [<ffffffff81007d62>] ? check_events+0x12/0x20 [<ffffffff811433bc>] do_vfs_ioctl+0x488/0x4d7 [<ffffffff81007d4f>] ? xen_restore_fl_direct_reloc+0x4/0x4 [<ffffffff8109168b>] ? lock_release+0x21c/0x229 [<ffffffff81135cdd>] ? rcu_read_unlock+0x21/0x32 [<ffffffff81143452>] sys_ioctl+0x47/0x6a [<ffffffff816bfd82>] system_call_fastpath+0x16/0x1b gntdev_put_map tries to acquire a mutex when freeing pages back to the xenballoon pool, so it cannot be called with a spinlock held. In gntdev_release, the spinlock is not needed as we are freeing the structure later; in the ioctl, only the list manipulation needs to be under the lock. Reported-and-Tested-By: Dario Faggioli <dario.faggioli@citrix.com> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14xenbus: don't rely on xen_initial_domain to detect local xenstoreDaniel De Graaf
The xenstore daemon does not have to run in the xen initial domain; however, Linux currently uses xen_initial_domain to test if a loopback event channel should be used instead of the event channel provided in Xen's start_info structure. Instead, if the event channel passed in the start_info structure is not valid, assume that this domain will run xenstored locally and set up the event channel. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14xenbus: Fix loopback event channel assuming domain 0Daniel De Graaf
The xenbus event channel established in xenbus_init is intended to be a loopback channel, but the remote domain was hardcoded to 0; this will cause the channel to be unusable when xenstore is not being run in domain 0. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-14coretemp: Get microcode revision from cpu_dataAndi Kleen
Now that the ucode revision is available in cpu_data remove the existing code in coretemp.c to query it manually. Read the ucode revision from cpu_data instead Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: jbeulich@novell.com Cc: fenghua.yu@intel.com Cc: khali@linux-fr.org Link: http://lkml.kernel.org/r/1318466795-7393-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-14Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio-pca953x: fix gpio_base gpio/omap: fix build error with certain OMAP1 configs
2011-10-13ftmac100: fix skb truesize underestimationEric Dumazet
ftmac100 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. If frame is under 64 bytes, page is freed, so increase truesize only for bigger frames. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 03:58:12 +0000