summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-10-10drm/radeon/kms: set DMA mask properly on newer PCI asicsAlex Deucher
If a card wasn't PCIE, we always set the DMA mask to 32 bits. This is only applies to the old rage128/r1xx gart block on early radeon asics (~r1xx-r4xx). Newer PCI and IGP cards can handle 40 bits just fine. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Chen Jie <chenj@lemote.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10DRM: bug: RADEON_DEBUGFS_MAX_{NUM_FILES => COMPONENTS}Michael Witten
The value of RADEON_DEBUGFS_MAX_NUM_FILES has been used to specify the size of an array, each element of which looks like this: struct radeon_debugfs { struct drm_info_list *files; unsigned num_files; }; Consequently, the number of debugfs files may be much greater than RADEON_DEBUGFS_MAX_NUM_FILES, something that the current code ignores: if ((_radeon_debugfs_count + nfiles) > RADEON_DEBUGFS_MAX_NUM_FILES) { DRM_ERROR("Reached maximum number of debugfs files.\n"); DRM_ERROR("Report so we increase RADEON_DEBUGFS_MAX_NUM_FILES.\n"); return -EINVAL; } This commit fixes this make, and accordingly renames: RADEON_DEBUGFS_MAX_NUM_FILES to: RADEON_DEBUGFS_MAX_COMPONENTS Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10drm/radeon/kms: handle !force case in connector detect more gracefullyAlex Deucher
When force == false, we don't do load detection in the connector detect functions. Unforunately, we also return the previous connector state so we never get disconnect events for DVI-I, DVI-A, or VGA. Save whether we detected the monitor via load detection previously and use that to determine whether we return the previous state or not. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41561 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10drm/radeon/kms: bail early in dvi_detect for digital only connectorsAlex Deucher
DVI-D and HDMI-A are digital only, so there's no need to attempt analog load detect. Also, skip bail before the !force check, or we fail to get a disconnect events. The next patches in the series attempt to fix disconnect events for connectors with analog support (DVI-I, HDMI-B, DVI-A). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41561 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10drm/radeon/kms: Fix I2C mask definitionsJean Delvare
Commit 9b9fe724 accidentally used RADEON_GPIO_EN_* where RADEON_GPIO_MASK_* was intended. This caused improper initialization of I2C buses, mostly visible when setting i2c_algo_bit.bit_test=1. Using the right constants fixes the problem. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <j.glisse@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10vmwgfx: Don't use virtual coords when using screen objectsJakob Bornecrantz
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10vmwgfx: Implement memory accounting for resourcesThomas Hellstrom
Contexts, surfaces and streams allocate persistent kernel memory as the direct result of user-space requests. Make sure this memory is accounted as graphics memory, to avoid DOS vulnerabilities. Also take the TTM read lock around resource creation to block switched-out dri clients from allocating resources. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-10x86, nmi, drivers: Fix nmi splitup build bugIngo Molnar
nmi.c needs an #include <linux/mca.h>: arch/x86/kernel/nmi.c: In function ‘unknown_nmi_error’: arch/x86/kernel/nmi.c:286:6: error: ‘MCA_bus’ undeclared (first use in this function) arch/x86/kernel/nmi.c:286:6: note: each undeclared identifier is reported only once for each function it appears in Another one is the hpwdt driver: drivers/watchdog/hpwdt.c:507:9: error: ‘NMI_DONE’ undeclared (first use in this function) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-09r6040: bump version to 0.28 and date to 07Oct2011.Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09r6040: invoke phy_{start,stop} when appropriateFlorian Fainelli
Joe reported to me that right after a bring up of a r6040 interface the ethtool output had no consistent output with respect to link duplex and speed. Fix this by adding a missing phy_start call in r6040_up and conversely a phy_stop call in r6040_down to properly initialize phy states. Reported-by: Joe Chou <Joe.Chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Adding 40gb speed report for ethtoolAlexander Guller
Query port will now identify a 40G Ethernet speed. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Fix crash upon device initialization errorAlexander Guller
Netdevice was being freed without being unregistered first if mlx4_SET_PORT_general or mlx4_INIT_PORT failed. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Fix QP number calculation according to module paramAlexander Guller
Number of bits taken from mac table index in QP calculation should be based on log_num_mac parameter. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Added missing iounmap upon releasing a deviceAlexander Guller
Fixed a memory leak caused by missing iounmap when device is being released. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Sharon Cohen <sharonc@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Adjusting moderation per each ringAlexander Guller
Moderation is now done per ring and coalescing is enabled by set_ring_param in ethtool. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Removing reserve vectorsAlexander Guller
Fixed a bug where ring size change caused insufficient memory upon driver restart due to unreleased EQs. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-09mlx4_en: Assigning TX irq per ringAlexander Guller
Until now only RX rings used irq per ring and TX used only one per port. >From now on, both of them will use the irq per ring while RX & TX ring[i] will use the same irq. Signed-off-by: Alexander Guller <alexg@mellanox.co.il> Signed-off-by: Sharon Cohen <sharonc@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1 drm/radeon/kms: fix dp_detect handling for DP bridge chips drm/radeon/kms: retry aux transactions if there are status flags
2011-10-10Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (29 commits) MIPS: Call oops_enter, oops_exit in die staging/octeon: Software should check the checksum of no tcp/udp packets MIPS: Octeon: Enable C0_UserLocal probing. MIPS: No branches in delay slots for huge pages in handle_tlbl MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC MIPS: Octeon: Select CONFIG_HOLES_IN_ZONE MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2) MIPS: Compat: Use 32-bit wrapper for compat_sys_futex. MIPS: Do not use EXTRA_CFLAGS MIPS: Alchemy: DB1200: Disable cascade IRQ in handler SERIAL: Lantiq: Set timeout in uart_port MIPS: Lantiq: Fix setting the PCI bus speed on AR9 MIPS: Lantiq: Fix external interrupt sources MIPS: tlbex: Fix build error in R3000 code. MIPS: Alchemy: Include Au1100 in PM code. MIPS: Alchemy: Fix typo in MAC0 registration MIPS: MSP71xx: Fix build error. MIPS: Handle __put_user() sleeping. MIPS: Allow forced irq threading MIPS: i8259: Mark cascade interrupt non-threaded ...
2011-10-09regmap: Use bsearch() to search the register defaultsMark Brown
Rather than open coding a binary search use the standard bsearch() using the comparison function we're already using for sort() on insert. This fixes a lockup I was observing due to iterating on min <= max rather than min < max when we fail to look up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2011-10-08HID: wacom: Set input bits before registrationDavid Herrmann
We shouldn't change the event flags of input devices after they get registered. Otherwise, udev will not get notified of these flags and cannot setup the devices properly. This fixes the probing to set the input event flags on the input_mapped callback instead of the probe function. Reported-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-07igb: add support for NETIF_F_RXHASHAlexander Duyck
This patch adds support for Rx hashing. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: move TX hang check flag into ring->flagsAlexander Duyck
This change moves the Tx hang check into the ring flags. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: fix recent VLAN changes that would leave VLANs disabled after resetAlexander Duyck
This patch cleans up several issues with VLANs on igb after the recent changes that were meant to leave the VLANs enabled/disable via the netdev->features flags. Specifically the Rx VLAN settings were being dropped after reset due to the fact that they were not being restored correctly. In addition I removed the IRQ disable/enable since those were in place to protect the setting of vlgrp. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: leave staterr in place and instead us a helper function to check bitsAlexander Duyck
Instead of doing a byte swap on the staterr bits in the Rx descriptor we can save ourselves a bit of space and some CPU time by instead just testing for the various bits out of the Rx descriptor directly. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: retire the RX_CSUM flag and use the netdev flag insteadAlexander Duyck
Since the netdev now has its' own checksum flag to indicate if Rx checksum is enabled we might as well use that instead of using the ring flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: cleanup IVAR configurationAlexander Duyck
This change is meant to cleanup some of the IVAR register configuration. igb_assign_vector had become pretty large with multiple copies of the same general code for setting the IVAR. This change consolidates most of that code by adding the igb_write_ivar function which allows us just to compute the index and offset and then use that information to setup the IVAR. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: Move ITR related data into work container within the q_vectorAlexander Duyck
This change moves information related to interrupt throttle rate configuration into a separate q_vector sub-structure called a work container. A similar change has already been made for ixgbe and this work is based off of that. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: Consolidate all of the ring feature flags into a single valueAlexander Duyck
This change moves all of the ring flags into a single value. The advantage to this is that there is one central area for all of these flags and they can all make use of the set/test bit operations. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: avoid unnecessary conversions from u16 to intAlexander Duyck
There are a number of places where we have values that are stored as u16 but are being converted to int unnecessarily. In order to avoid that we should convert all variables that deal with the next_to_clean, next_to_use, and count to u16 values. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: Use node specific allocations for the q_vectors and ringsAlexander Duyck
This change is meant to update the ring and vector allocations so that they are per node instead of allocating everything on the node that ifconfig/modprobe is called on. By doing this we can cut down significantly on cross node traffic. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-07igb: push data into first igb_tx_buffer sooner to reduce stack usageAlexander Duyck
Instead of storing most of the data for the TX hot path in the stack until we are ready to write the descriptor we can save ourselves some time and effort by pushing the SKB, tx_flags, gso_size, bytecount, and protocol into the first igb_tx_buffer since that is where we will end up putting it anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-08ata: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08ata: Make pata_of_platform.c compile again and work on non-PPC platformsPawel Moll
This patch adds missing #includes, makes the driver selectable on non-PPC OF-enabled platforms and fixes property value accesses to be correct in Little Endian system. Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08pata_sis: code style cleanups for consistencyDan McGee
Remove a lot of ' ' (double spaces) as well as ensuring use of tabs vs. spaces is appropriate and consistent. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08pata_sis: mark most const data static as wellDan McGee
This pushes timing and other values into preinitialized read-only data sections rather than being inlined into the code. None of these functions are called more than a handful of times, so reducing code size makes sense. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08pata_sis: enable MWDMA for UDMA 133 chipsetDan McGee
This ports the timing values over from the old IDE driver into the new PATA-based one. The comment was lying when it stated the old driver was not MWDMA capable. Boot tested on actual hardware using 'libata.force=mwdma2'. Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08pata_sis: add mode_filter method for certain sis5513 chipsetsDan McGee
This mirrors a very old commit (3160d5416f39da9d9, "sis5513: add ->udma_filter method for chipset_family >= ATA_133") to the old sis5513 IDE driver that prevents certain setups from working. UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure this mode is not chosen even if a connected drive supports it. Port this old patch forward to the new PATA driver to ensure UDMA5 is the highest mode used if that is what is supported. Kernel bugzilla #41582. Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08pata_sis: extract a sis_port_base() methodDan McGee
This is similar to the existing sis_old_port_base() method. We do this same calculation and logic in multiple places (with one more to come in a future patch), so extracting it into a method makes sense. Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Dan McGee <dpmcgee@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08[libata] ahci_platform: Add the board_ids and pi refer to different featuresRichard Zhu
On imx53 AHCI, soft reset fails with IPMS set when PMP is enabled but SATA HDD/ODD is connected to SATA port, do soft reset again to port 0. So the 'ahci_pmp_retry_srst_ops' is required when imx53 ahci is present. Signed-off-by: Richard Zhu <richard.zhu@linaro.org> Acked-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08libata-eh: ata_eh_followup_srst_needed() does not need 'classes' parameterSergei Shtylyov
... since it does not use it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-08sata_sil24: Use constJoe Perches
Reduce data by using const. $ size drivers/ata/sata_sil24.o* text data bss dec hex filename 12764 614 2688 16066 3ec2 drivers/ata/sata_sil24.o.new 12320 1058 2688 16066 3ec2 drivers/ata/sata_sil24.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge ↵Ming Lei
chipsets(v2) This quirk patch fixes one kind of bug inside some Intel Sandybridge chipsets, see reports from https://bugzilla.kernel.org/show_bug.cgi?id=40592. Many guys also have reported the problem before: https://bugs.launchpad.net/bugs/737388 https://bugs.launchpad.net/bugs/794642 https://bugs.launchpad.net/bugs/782389 ...... With help from Tejun, the problem is found to be caused by 32bit PIO mode, so introduce the quirk patch to disable 32bit PIO on SATA piix for some Sandybridge CPT chipsets. Seth also tested the patch on all five affected chipsets (pci device ID: 0x1c00, 0x1c01, 0x1d00, 0x1e00, 0x1e01), and found the patch does fix the problem. Tested-by: Heasley, Seth <seth.heasley@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: stable@kernel.org
2011-10-07libata: clear PIO pad areaTejun Heo
ata_sff_data_xfer[32]() use pad area if the transfer size isn't multiple of transfer size; however, this area wasn't cleared and garbage data in pad area could be transferred to the device. Make sure the pad area is cleared. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Lei Ming <tom.leiming@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07sata_mv: use {platform|pci}_get_drvdata()Sergei Shtylyov
The driver uses dev_get_drvdata() to get to the driver data for the platform and PCI devices, while the corresponding wrappers exists for them -- in one case it even declares an otherwise unneeded variable to do that. Switch to using the {platform|pci}_get_drvdata() instead. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07sata_mv: release clock on ata_host_activate() failureSergei Shtylyov
mv_platfrom_probe() forgets to call clk_disable() and clk_put() iff ata_host_activate() fails... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-07net: Remove unnecessary driver assignments of ethtool_ringparam fields to zeroRick Jones
Per comments from Ben Hutchings on a previous patch, sweep the floors a little removing unnecessary assignments of zero to fields of struct ethtool_ringparam in driver code supporting ethtool -g. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-07Merge branch 'pm-devfreq' into pm-for-linusRafael J. Wysocki
* pm-devfreq: PM / devfreq: Add basic governors PM / devfreq: Add common sysfs interfaces PM: Introduce devfreq: generic DVFS framework with device-specific OPPs PM / OPP: Add OPP availability change notifier.
2011-10-07Merge branch 'pm-qos' into pm-for-linusRafael J. Wysocki
* pm-qos: PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks PM / QoS: Add function dev_pm_qos_read_value() (v3) PM QoS: Add global notification mechanism for device constraints PM QoS: Implement per-device PM QoS constraints PM QoS: Generalize and export constraints management code PM QoS: Reorganize data structs PM QoS: Code reorganization PM QoS: Minor clean-ups PM QoS: Move and rename the implementation files
generated by cgit (git 2.34.1) at 2025-09-16 04:10:27 +0000