summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-12-16RDMA/bnxt_re: Add check for path mtu in modify_qpSaravanan Vajravel
When RDMA app configures path MTU, add a check in modify_qp verb to make sure that it doesn't go beyond interface MTU. If this check fails, driver will fail the modify_qp verb. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/20241211083931.968831-3-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-12-16RDMA/bnxt_re: Fix the check for 9060 conditionKalesh AP
The check for 9060 condition should only be made for legacy chips. Fixes: 9152e0b722b2 ("RDMA/bnxt_re: HW workarounds for handling specific conditions") Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/20241211083931.968831-2-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-12-16PCI/MSI: Handle lack of irqdomain gracefullyThomas Gleixner
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support: WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32 __pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2 RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub. That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP. Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over. Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it. Fixes: d2a463b29741 ("PCI/MSI: Reject multi-MSI early") Reported-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/87ed2a8ow5.ffs@tglx
2024-12-16thunderbolt: Improve redrive mode handlingMika Westerberg
When USB-C monitor is connected directly to Intel Barlow Ridge host, it goes into "redrive" mode that basically routes the DisplayPort signals directly from the GPU to the USB-C monitor without any tunneling needed. However, the host router must be powered on for this to work. Aaron reported that there are a couple of cases where this will not work with the current code: - Booting with USB-C monitor plugged in. - Plugging in USB-C monitor when the host router is in sleep state (runtime suspended). - Plugging in USB-C device while the system is in system sleep state. In all these cases once the host router is runtime suspended the picture on the connected USB-C display disappears too. This is certainly not what the user expected. For this reason improve the redrive mode handling to keep the host router from runtime suspending when detect that any of the above cases is happening. Fixes: a75e0684efe5 ("thunderbolt: Keep the domain powered when USB4 port is in redrive mode") Reported-by: Aaron Rainbolt <arainbolt@kfocus.org> Closes: https://lore.kernel.org/linux-usb/20241009220118.70bfedd0@kf-ir16/ Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-12-15Merge tag 'efi-fixes-for-v6.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - Limit EFI zboot to GZIP and ZSTD before it comes in wider use - Fix inconsistent error when looking up a non-existent file in efivarfs with a name that does not adhere to the NAME-GUID format - Drop some unused code * tag 'efi-fixes-for-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/esrt: remove esre_attribute::store() efivarfs: Fix error on non-existent file efi/zboot: Limit compression options to GZIP and ZSTD
2024-12-15Merge tag 'i2c-for-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "i2c host fixes: PNX used the wrong unit for timeouts, Nomadik was missing a sentinel, and RIIC was missing rounding up" * tag 'i2c-for-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: riic: Always round-up when calculating bus period i2c: nomadik: Add missing sentinel to match table i2c: pnx: Fix timeout in wait functions
2024-12-15net: renesas: rswitch: rework ts tags managementNikita Yushchenko
The existing linked list based implementation of how ts tags are assigned and managed is unsafe against concurrency and corner cases: - element addition in tx processing can race against element removal in ts queue completion, - element removal in ts queue completion can race against element removal in device close, - if a large number of frames gets added to tx queue without ts queue completions in between, elements with duplicate tag values can get added. Use a different implementation, based on per-port used tags bitmaps and saved skb arrays. Safety for addition in tx processing vs removal in ts completion is provided by: tag = find_first_zero_bit(...); smp_mb(); <write rdev->ts_skb[tag]> set_bit(...); vs <read rdev->ts_skb[tag]> smp_mb(); clear_bit(...); Safety for removal in ts completion vs removal in device close is provided by using atomic read-and-clear for rdev->ts_skb[tag]: ts_skb = xchg(&rdev->ts_skb[tag], NULL); if (ts_skb) <handle it> Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://patch.msgid.link/20241212062558.436455-1-nikita.yoush@cogentembedded.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: use ee->offset when returning sprom dataShannon Nelson
Some calls into ionic_get_module_eeprom() don't use a single full buffer size, but instead multiple calls with an offset. Teach our driver to use the offset correctly so we can respond appropriately to the caller. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: no double destroy workqueueShannon Nelson
There are some FW error handling paths that can cause us to try to destroy the workqueue more than once, so let's be sure we're checking for that. The case where this popped up was in an AER event where the handlers got called in such a way that ionic_reset_prepare() and thus ionic_dev_teardown() got called twice in a row. The second time through the workqueue was already destroyed, and destroy_workqueue() choked on the bad wq pointer. We didn't hit this in AER handler testing before because at that time we weren't using a private workqueue. Later we replaced the use of the system workqueue with our own private workqueue but hadn't rerun the AER handler testing since then. Fixes: 9e25450da700 ("ionic: add private workqueue per-device") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15ionic: Fix netdev notifier unregister on failureBrett Creeley
If register_netdev() fails, then the driver leaks the netdev notifier. Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered. Fixes: 30b87ab4c0b3 ("ionic: remove lif list concept") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241212213157.12212-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15netdevsim: prevent bad user input in nsim_dev_health_break_write()Eric Dumazet
If either a zero count or a large one is provided, kernel can crash. Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Reported-by: syzbot+ea40e4294e58b0292f74@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/675c6862.050a0220.37aaf.00b1.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241213172518.2415666-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic()Vladimir Oltean
Packets injected by the CPU should have a SRC_PORT field equal to the CPU port module index in the Analyzer block (ocelot->num_phys_ports). The blamed commit copied the ocelot_ifh_set_basic() call incorrectly from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling with "x", it calls with BIT_ULL(x), but the field is not a port mask, but rather a single port index. [ side note: this is the technical debt of code duplication :( ] The error used to be silent and doesn't appear to have other user-visible manifestations, but with new changes in the packing library, it now fails loudly as follows: ------------[ cut here ]------------ Cannot store 0x40 inside bits 46-43 - will truncate sja1105 spi2.0: xmit timed out WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198 sja1105 spi2.0: timed out polling for tstamp CPU: 1 UID: 0 PID: 102 Comm: felix_xmit Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605 Call trace: __pack+0x90/0x198 (P) __pack+0x90/0x198 (L) packing+0x78/0x98 ocelot_ifh_set_basic+0x260/0x368 ocelot_port_inject_frame+0xa8/0x250 felix_port_deferred_xmit+0x14c/0x258 kthread_worker_fn+0x134/0x350 kthread+0x114/0x138 The code path pertains to the ocelot switchdev driver and to the felix secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q. The messenger (packing) is not really to blame, so fix the original commit instead. Fixes: e1b9e80236c5 ("net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241212165546.879567-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-15Merge tag 'edac_urgent_for_v6.13_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Make sure amd64_edac loads successfully on certain Zen4 memory configurations * tag 'edac_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/amd64: Simplify ECC check on unified memory controllers
2024-12-15Merge tag 'irq_urgent_for_v6.13_rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Disable the secure programming interface of the GIC500 chip in the RK3399 SoC to fix interrupt priority assignment and even make a dead machine boot again when the gic-v3 driver enables pseudo NMIs - Correct the declaration of a percpu variable to fix several sparse warnings * tag 'irq_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Work around insecure GIC integrations irqchip/gic: Correct declaration of *percpu_base pointer in union gic_base
2024-12-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Single one-line fix in the ufs driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqe
2024-12-14Merge tag 'usb-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes for some reported issues. Included in here are: - typec driver bugfixes - u_serial gadget driver bugfix for much reported and discussed issue - dwc2 bugfixes - midi gadget driver bugfix - ehci-hcd driver bugfix - other small bugfixes All of these have been in linux-next for over a week with no reported issues" * tag 'usb-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix connector status writing past buffer size usb: typec: ucsi: Fix completion notifications usb: dwc2: Fix HCD port connection race usb: dwc2: hcd: Fix GetPortStatus & SetPortFeature usb: dwc2: Fix HCD resume usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus support usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only mode usb: core: hcd: only check primary hcd skip_phy_initialization usb: gadget: midi2: Fix interpretation of is_midi1 bits usb: dwc3: imx8mp: fix software node kernel dump usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe() usb: typec: anx7411: fix fwnode_handle reference leak usb: host: max3421-hcd: Correctly abort a USB request. dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml usb: ehci-hcd: fix call balance of clocks handling routines
2024-12-14Merge tag 'tty-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are two small serial driver fixes for 6.13-rc3. They are: - ioport build fallout fix for the 8250 port driver that should resolve Guenter's runtime problems - sh-sci driver bugfix for a reported problem Both of these have been in linux-next for a while with no reported issues" * tag 'tty-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: Work around warning backtrace in serial8250_set_defaults serial: sh-sci: Check if TX data was written to device in .tx_empty()
2024-12-14Merge tag 'staging-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging gpib driver build and bugfixes for issues that have been much-reported (should finally fix Guenter's build issues). There are more of these coming in later -rc releases, but for now this should fix the majority of the reported problems. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: gpib: Fix i386 build issue staging: gpib: Fix faulty workaround for assignment in if staging: gpib: Workaround for ppc build failure staging: gpib: Make GPIB_NI_PCI_ISA depend on HAS_IOPORT
2024-12-14Merge tag 'v6.13-p2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a regression in rsassa-pkcs1 as well as a buffer overrun in hisilicon/debugfs" * tag 'v6.13-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon/debugfs - fix the struct pointer incorrectly offset problem crypto: rsassa-pkcs1 - Copy source data for SG list
2024-12-14Merge tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linuxLinus Torvalds
Pull rust fixes from Miguel Ojeda: "Toolchain and infrastructure: - Set bindgen's Rust target version to prevent issues when pairing older rustc releases with newer bindgen releases, such as bindgen >= 0.71.0 and rustc < 1.82 due to unsafe_extern_blocks. drm/panic: - Remove spurious empty line detected by a new Clippy warning" * tag 'rust-fixes-6.13' of https://github.com/Rust-for-Linux/linux: rust: kbuild: set `bindgen`'s Rust target version drm/panic: remove spurious empty line to clean warning
2024-12-14Merge tag 'iommu-fixes-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - Per-domain device-list locking fixes for the AMD IOMMU driver - Fix incorrect use of smp_processor_id() in the NVidia-specific part of the ARM-SMMU-v3 driver - Intel IOMMU driver fixes: - Remove cache tags before disabling ATS - Avoid draining PRQ in sva mm release path - Fix qi_batch NULL pointer with nested parent domain * tag 'iommu-fixes-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/vt-d: Avoid draining PRQ in sva mm release path iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain iommu/vt-d: Remove cache tags before disabling ATS iommu/amd: Add lockdep asserts for domain->dev_list iommu/amd: Put list_add/del(dev_data) back under the domain->lock iommu/tegra241-cmdqv: do not use smp_processor_id in preemptible context
2024-12-14Merge tag 'ata-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fix from Damien Le Moal: - Fix an OF node reference leak in the sata_highbank driver * tag 'ata-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()
2024-12-13net: tun: fix tun_napi_alloc_frags()Eric Dumazet
syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: de4f5fed3f23 ("iov_iter: add iter_iovec() helper") Reported-by: syzbot+4f66250f6663c0c1d67e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/675b61aa.050a0220.599f4.00bb.GAE@google.com/T/#u Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20241212222247.724674-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-13Merge tag 'spi-fix-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few fairly small fixes for v6.13, the most substatial one being disabling STIG mode for Cadence QSPI controllers on Altera SoCFPGA platforms since it doesn't work" * tag 'spi-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-cadence-qspi: Disable STIG mode for Altera SoCFPGA. spi: rockchip: Fix PM runtime count on no-op cs spi: aspeed: Fix an error handling path in aspeed_spi_[read|write]_user()
2024-12-13Merge tag 'regulator-fix-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of additional changes, one ensuring we give AXP717 enough time to stabilise after changing voltages which fixes serious stability issues on some platforms and another documenting the DT support required for the Qualcomm WCN6750" * tag 'regulator-fix-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: axp20x: AXP717: set ramp_delay regulator: dt-bindings: qcom,qca6390-pmu: document wcn6750-pmu
2024-12-13Merge tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "This is the weekly fixes pull for drm. Just has i915, xe and amdgpu changes in it. Nothing too major in here: i915: - Don't use indexed register writes needlessly [dsb] - Stop using non-posted DSB writes for legacy LUT [color] - Fix NULL pointer dereference in capture_engine - Fix memory leak by correcting cache object name in error handler xe: - Fix a KUNIT test error message (Mirsad Todorovac) - Fix an invalidation fence PM ref leak (Daniele) - Fix a register pool UAF (Lucas) amdgpu: - ISP hw init fix - SR-IOV fixes - Fix contiguous VRAM mapping for UVD on older GPUs - Fix some regressions due to drm scheduler changes - Workload profile fixes - Cleaner shader fix amdkfd: - Fix DMA map direction for migration - Fix a potential null pointer dereference - Cacheline size fixes - Runtime PM fix" * tag 'drm-fixes-2024-12-14' of https://gitlab.freedesktop.org/drm/kernel: drm/xe/reg_sr: Remove register pool drm/xe: Call invalidation_fence_fini for PT inval fences in error state drm/xe: fix the ERR_PTR() returned on failure to allocate tiny pt drm/amdkfd: pause autosuspend when creating pdd drm/amdgpu: fix when the cleaner shader is emitted drm/amdgpu: Fix ISP HW init issue drm/amdkfd: hard-code MALL cacheline size for gfx11, gfx12 drm/amdkfd: hard-code cacheline size for gfx11 drm/amdkfd: Dereference null return value drm/i915: Fix memory leak by correcting cache object name in error handler drm/i915: Fix NULL pointer dereference in capture_engine drm/i915/color: Stop using non-posted DSB writes for legacy LUT drm/i915/dsb: Don't use indexed register writes needlessly drm/amdkfd: Correct the migration DMA map direction drm/amd/pm: Set SMU v13.0.7 default workload type drm/amd/pm: Initialize power profile mode amdgpu/uvd: get ring reference from rq scheduler drm/amdgpu: fix UVD contiguous CS mapping problem drm/amdgpu: use sjt mec fw on gfx943 for sriov Revert "drm/amdgpu: Fix ISP hw init issue"
2024-12-13Merge tag 'acpi-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two coding mistakes, one in the ACPI resources handling code and one in ACPICA: - Relocate the addr->info.mem.caching check in acpi_decode_space() to only execute it if the resource is of the correct type (Ilpo Järvinen) - Don't release a context_mutex that was never acquired in acpi_remove_address_space_handler() (Daniil Tatianin)" * tag 'acpi-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired ACPI: resource: Fix memory resource type union access
2024-12-13Merge tag 'block-6.13-20241213' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Series from Damien fixing issues with the zoned write plugging - Fix for a potential UAF in block cgroups - Fix deadlock around queue freezing and the sysfs lock - Various little cleanups and fixes * tag 'block-6.13-20241213' of git://git.kernel.dk/linux: block: Fix potential deadlock while freezing queue and acquiring sysfs_lock block: Fix queue_iostats_passthrough_show() blk-mq: Clean up blk_mq_requeue_work() mq-deadline: Remove a local variable blk-iocost: Avoid using clamp() on inuse in __propagate_weights() block: Make bio_iov_bvec_set() accept pointer to const iov_iter block: get wp_offset by bdev_offset_from_zone_start blk-cgroup: Fix UAF in blkcg_unpin_online() MAINTAINERS: update Coly Li's email address block: Prevent potential deadlocks in zone write plug error recovery dm: Fix dm-zoned-reclaim zone write pointer alignment block: Ignore REQ_NOWAIT for zone reset and zone finish operations block: Use a zone write plug BIO work for REQ_NOWAIT BIOs
2024-12-13Merge tag 'libnvdimm-fixes-6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Ira Weiny: - sysbot fix for out of bounds access * tag 'libnvdimm-fixes-6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
2024-12-14drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()Ville Syrjälä
drm_mode_vrefresh() is trying to avoid divide by zero by checking whether htotal or vtotal are zero. But we may still end up with a div-by-zero of vtotal*htotal*... Cc: stable@vger.kernel.org Reported-by: syzbot+622bba18029bcde672e1@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=622bba18029bcde672e1 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129042629.18280-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-12-13Merge branch 'acpica'Rafael J. Wysocki
Merge an ACPICA fix for 6.13-rc3: - Don't release a context_mutex that was never acquired in acpi_remove_address_space_handler() (Daniil Tatianin). * acpica: ACPICA: events/evxfregn: don't release the ContextMutex that was never acquired
2024-12-13Merge tag 'gpio-fixes-for-v6.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix several low-level issues in gpio-graniterapids - fix an initialization order issue that manifests itself with __counted_by() checks in gpio-ljca - don't default to y for CONFIG_GPIO_MVEBU with COMPILE_TEST enabled - move the DEFAULT_SYMBOL_NAMESPACE define before the export.h include in gpio-idio-16 * tag 'gpio-fixes-for-v6.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: idio-16: Actually make use of the GPIO_IDIO_16 symbol namespace gpio: graniterapids: Fix GPIO Ack functionality gpio: graniterapids: Check if GPIO line can be used for IRQs gpio: graniterapids: Determine if GPIO pad can be used by driver gpio: graniterapids: Fix invalid RXEVCFG register bitmask gpio: graniterapids: Fix invalid GPI_IS register offset gpio: graniterapids: Fix incorrect BAR assignment gpio: graniterapids: Fix vGPIO driver crash gpio: ljca: Initialize num before accessing item in ljca_gpio_config gpio: GPIO_MVEBU should not default to y when compile-testing
2024-12-13irqchip/gic-v3: Work around insecure GIC integrationsMarc Zyngier
It appears that the relatively popular RK3399 SoC has been put together using a large amount of illicit substances, as experiments reveal that its integration of GIC500 exposes the *secure* programming interface to non-secure. This has some pretty bad effects on the way priorities are handled, and results in a dead machine if booting with pseudo-NMI enabled (irqchip.gicv3_pseudo_nmi=1) if the kernel contains 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time"), which relies on the priorities being programmed using the NS view. Let's restore some sanity by going one step further and disable security altogether in this case. This is not any worse, and puts us in a mode where priorities actually make some sense. Huge thanks to Mark Kettenis who initially identified this issue on OpenBSD, and to Chen-Yu Tsai who reported the problem in Linux. Fixes: 18fdb6348c480 ("arm64: irqchip/gic-v3: Select priorities at boot time") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Reported-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Chen-Yu Tsai <wens@csie.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241213141037.3995049-1-maz@kernel.org
2024-12-13irqchip/gic: Correct declaration of *percpu_base pointer in union gic_baseUros Bizjak
percpu_base is used in various percpu functions that expect variable in __percpu address space. Correct the declaration of percpu_base to void __iomem * __percpu *percpu_base; to declare the variable as __percpu pointer. The patch fixes several sparse warnings: irq-gic.c:1172:44: warning: incorrect type in assignment (different address spaces) irq-gic.c:1172:44: expected void [noderef] __percpu *[noderef] __iomem *percpu_base irq-gic.c:1172:44: got void [noderef] __iomem *[noderef] __percpu * ... irq-gic.c:1231:43: warning: incorrect type in argument 1 (different address spaces) irq-gic.c:1231:43: expected void [noderef] __percpu *__pdata irq-gic.c:1231:43: got void [noderef] __percpu *[noderef] __iomem *percpu_base There were no changes in the resulting object files. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/all/20241213145809.2918-2-ubizjak@gmail.com
2024-12-13drm/display: use ERR_PTR on DP tunnel manager creation failKrzysztof Karas
Instead of returning a generic NULL on error from drm_dp_tunnel_mgr_create(), use error pointers with informative codes to align the function with stub that is executed when CONFIG_DRM_DISPLAY_DP_TUNNEL is unset. This will also trigger IS_ERR() in current caller (intel_dp_tunnerl_mgr_init()) instead of bypassing it via NULL pointer. v2: use error codes inside drm_dp_tunnel_mgr_create() instead of handling on caller's side (Michal, Imre) v3: fixup commit message and add "CC"/"Fixes" lines (Andi), mention aligning function code with stub Fixes: 91888b5b1ad2 ("drm/i915/dp: Add support for DP tunnel BW allocation") Cc: Imre Deak <imre.deak@intel.com> Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7q4fpnmmztmchczjewgm6igy55qt6jsm7tfd4fl4ucfq6yg2oy@q4lxtsu6445c
2024-12-13media: mediatek: vcodec: mark vdec_vp9_slice_map_counts_eob_coef noinlineArnd Bergmann
With KASAN enabled, clang fails to optimize the inline version of vdec_vp9_slice_map_counts_eob_coef() properly, leading to kilobytes of temporary values spilled to the stack: drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c:1526:12: error: stack frame size (2160) exceeds limit (2048) in 'vdec_vp9_slice_update_prob' [-Werror,-Wframe-larger-than] This seems to affect all versions of clang including the latest (clang-20), but the degree of stack overhead is different per release. Marking the function as noinline_for_stack is harmless here and avoids the problem completely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-13iommu/vt-d: Avoid draining PRQ in sva mm release pathLu Baolu
When a PASID is used for SVA by a device, it's possible that the PASID entry is cleared before the device flushes all ongoing DMA requests and removes the SVA domain. This can occur when an exception happens and the process terminates before the device driver stops DMA and calls the iommu driver to unbind the PASID. There's no need to drain the PRQ in the mm release path. Instead, the PRQ will be drained in the SVA unbind path. Unfortunately, commit c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID") changed this behavior by unconditionally draining the PRQ in intel_pasid_tear_down_entry(). This can lead to a potential sleeping-in-atomic-context issue. Smatch static checker warning: drivers/iommu/intel/prq.c:95 intel_iommu_drain_pasid_prq() warn: sleeping in atomic context To avoid this issue, prevent draining the PRQ in the SVA mm release path and restore the previous behavior. Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-iommu/c5187676-2fa2-4e29-94e0-4a279dc88b49@stanley.mountain/ Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20241212021529.1104745-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-12-13iommu/vt-d: Fix qi_batch NULL pointer with nested parent domainYi Liu
The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 705c1cdf1e73 ("iommu/vt-d: Introduce batched cache invalidation") Cc: stable@vger.kernel.org Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20241210130322.17175-1-yi.l.liu@intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-12-13iommu/vt-d: Remove cache tags before disabling ATSLu Baolu
The current implementation removes cache tags after disabling ATS, leading to potential memory leaks and kernel crashes. Specifically, CACHE_TAG_DEVTLB type cache tags may still remain in the list even after the domain is freed, causing a use-after-free condition. This issue really shows up when multiple VFs from different PFs passed through to a single user-space process via vfio-pci. In such cases, the kernel may crash with kernel messages like: BUG: kernel NULL pointer dereference, address: 0000000000000014 PGD 19036a067 P4D 1940a3067 PUD 136c9b067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 74 UID: 0 PID: 3183 Comm: testCli Not tainted 6.11.9 #2 RIP: 0010:cache_tag_flush_range+0x9b/0x250 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x163/0x590 ? exc_page_fault+0x72/0x190 ? asm_exc_page_fault+0x22/0x30 ? cache_tag_flush_range+0x9b/0x250 ? cache_tag_flush_range+0x5d/0x250 intel_iommu_tlb_sync+0x29/0x40 intel_iommu_unmap_pages+0xfe/0x160 __iommu_unmap+0xd8/0x1a0 vfio_unmap_unpin+0x182/0x340 [vfio_iommu_type1] vfio_remove_dma+0x2a/0xb0 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xafa/0x18e0 [vfio_iommu_type1] Move cache_tag_unassign_domain() before iommu_disable_pci_caps() to fix it. Fixes: 3b1d9e2b2d68 ("iommu/vt-d: Add cache tag assignment interface") Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20241129020506.576413-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2024-12-13dm array: fix cursor index when skipping across block boundariesMing-Hung Tsai
dm_array_cursor_skip() seeks to the target position by loading array blocks iteratively until the specified number of entries to skip is reached. When seeking across block boundaries, it uses dm_array_cursor_next() to step into the next block. dm_array_cursor_skip() must first move the cursor index to the end of the current block; otherwise, the cursor position could incorrectly remain in the same block, causing the actual number of skipped entries to be much smaller than expected. This bug affects cache resizing in v2 metadata and could lead to data loss if the fast device is shrunk during the first-time resume. For example: 1. create a cache metadata consists of 32768 blocks, with a dirty block assigned to the second bitmap block. cache_restore v1.0 is required. cat <<EOF >> cmeta.xml <superblock uuid="" block_size="64" nr_cache_blocks="32768" \ policy="smq" hint_width="4"> <mappings> <mapping cache_block="32767" origin_block="0" dirty="true"/> </mappings> </superblock> EOF dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" cache_restore -i cmeta.xml -o /dev/mapper/cmeta --metadata-version=2 2. bring up the cache while attempt to discard all the blocks belonging to the second bitmap block (block# 32576 to 32767). The last command is expected to fail, but it actually succeeds. dmsetup create cdata --table "0 2084864 linear /dev/sdc 8192" dmsetup create corig --table "0 65536 linear /dev/sdc 2105344" dmsetup create cache --table "0 65536 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 64 2 metadata2 writeback smq \ 2 migration_threshold 0" In addition to the reproducer described above, this fix can be verified using the "array_cursor/skip" tests in dm-unit: dm-unit run /pdata/array_cursor/skip/ --kernel-dir <KERNEL_DIR> Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: 9b696229aa7d ("dm persistent data: add cursor skip functions to the cursor APIs") Reviewed-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-12-13dm array: fix unreleased btree blocks on closing a faulty array cursorMing-Hung Tsai
The cached block pointer in dm_array_cursor might be NULL if it reaches an unreadable array block, or the array is empty. Therefore, dm_array_cursor_end() should call dm_btree_cursor_end() unconditionally, to prevent leaving unreleased btree blocks. This fix can be verified using the "array_cursor/iterate/empty" test in dm-unit: dm-unit run /pdata/array_cursor/iterate/empty --kernel-dir <KERNEL_DIR> Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: fdd1315aa5f0 ("dm array: introduce cursor api") Reviewed-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-12-13dm array: fix releasing a faulty array block twice in dm_array_cursor_endMing-Hung Tsai
When dm_bm_read_lock() fails due to locking or checksum errors, it releases the faulty block implicitly while leaving an invalid output pointer behind. The caller of dm_bm_read_lock() should not operate on this invalid dm_block pointer, or it will lead to undefined result. For example, the dm_array_cursor incorrectly caches the invalid pointer on reading a faulty array block, causing a double release in dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put(). Reproduce steps: 1. initialize a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. wipe the second array block offline dmsteup remove cache cmeta cdata corig mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try reopen the cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) device-mapper: array: array_block_check failed: blocknr 0 != wanted 10 device-mapper: block manager: array validator check failed for block 10 device-mapper: array: get_ablock failed device-mapper: cache metadata: dm_array_cursor_next for mapping failed ------------[ cut here ]------------ kernel BUG at drivers/md/dm-bufio.c:638! Fix by setting the cached block pointer to NULL on errors. In addition to the reproducer described above, this fix can be verified using the "array_cursor/damaged" test in dm-unit: dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com> Fixes: fdd1315aa5f0 ("dm array: introduce cursor api") Reviewed-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-12-13Merge tag 'ffa-fix-6.13' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FF-A fix for v6.13 A single fix to address a possible race around setting ffa_dev->properties in ffa_device_register() by updating ffa_device_register() to take all the partition information received from the firmware and updating the struct ffa_device accordingly before registering the device to the bus/driver model in the kernel. * tag 'ffa-fix-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_ffa: Fix the race around setting ffa_dev->properties Link: https://lore.kernel.org/r/20241210101113.3232602-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-13wifi: iwlwifi: fix CRF name for BzEmmanuel Grumbach
We had BE201 hard coded. Look at the RF_ID and decide based on its value. Fixes: 6795a37161fb ("wifi: iwlwifi: Print a specific device name.") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241212132940.b9eebda1ca60.I36791a134ed5e538e059418eb6520761da97b44c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-13drm/panel: synaptics-r63353: Fix regulator unbalanceMichael Trimarchi
The shutdown function can be called when the display is already unprepared. For example during reboot this trigger a kernel backlog. Calling the drm_panel_unprepare, allow us to avoid to trigger the kernel warning. Fixes: 2e87bad7cd33 ("drm/panel: Add Synaptics R63353 panel driver") Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241205163002.1804784-1-dario.binacchi@amarulasolutions.com
2024-12-13drm/panel: st7701: Add prepare_prev_first flag to drm_panelMarek Vasut
The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. This fixes the panel operation on NXP i.MX8MP SoC / Samsung DSIM DSI host. Fixes: 849b2e3ff969 ("drm/panel: Add Sitronix ST7701 panel driver") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20241124224812.150263-1-marex@denx.de Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241124224812.150263-1-marex@denx.de
2024-12-13drm/panel: novatek-nt35950: fix return value check in nt35950_probe()Yang Yingliang
mipi_dsi_device_register_full() never returns NULL pointer, it will return ERR_PTR() when it fails, so replace the check with IS_ERR(). Fixes: 623a3531e9cf ("drm/panel: Add driver for Novatek NT35950 DSI DriverIC panels") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241029123957.1588-1-yangyingliang@huaweicloud.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241029123957.1588-1-yangyingliang@huaweicloud.com
2024-12-13drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereferenceZhang Zekun
drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. Fixes: 0ef94554dc40 ("drm/panel: himax-hx83102: Break out as separate driver") Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20241025073408.27481-3-zhangzekun11@huawei.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025073408.27481-3-zhangzekun11@huawei.com
2024-12-13xen/netfront: fix crash when removing deviceJuergen Gross
When removing a netfront device directly after a suspend/resume cycle it might happen that the queues have not been setup again, causing a crash during the attempt to stop the queues another time. Fix that by checking the queues are existing before trying to stop them. This is XSA-465 / CVE-2024-53240. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: d50b7914fae0 ("xen-netfront: Fix NULL sring after live migration") Signed-off-by: Juergen Gross <jgross@suse.com>
2024-12-13efi/esrt: remove esre_attribute::store()Jiri Slaby (SUSE)
esre_attribute::store() is not needed since commit af97a77bc01c (efi: Move some sysfs files to be read-only by root). Drop it. Found by https://github.com/jirislaby/clang-struct. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: linux-efi@vger.kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 14:44:09 +0000