| Age | Commit message (Collapse) | Author |
|---|
|
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
|
|
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001
[ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000
[ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff
[ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering")
Cc: stable@vger.kernel.org
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zach Wade <zachwade.k@gmail.com>
Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
If phy_read_mmd() fails, the error code stored in 'bmsr' should be returned
instead of 'val' which is likely to be 0.
Fixes: 75f4d8d10e01 ("net: phy: add Broadcom BCM84881 PHY driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/3e1755b0c40340d00e089d6adae5bca2f8c79e53.1727982168.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 4e0a1d8b0675
("Bluetooth: btusb: Don't suspend when there are connections")
introduces a check for connections to prevent auto-suspend but that
actually ignored the fact the .suspend callback can be called for
external suspend requests which
Documentation/driver-api/usb/power-management.rst states the following:
'External suspend calls should never be allowed to fail in this way,
only autosuspend calls. The driver can tell them apart by applying
the :c:func:`PMSG_IS_AUTO` macro to the message argument to the
``suspend`` method; it will return True for internal PM events
(autosuspend) and False for external PM events.'
In addition to that align system suspend with USB suspend by using
hci_suspend_dev since otherwise the stack would be expecting events
such as advertising reports which may not be delivered while the
transport is suspended.
Fixes: 4e0a1d8b0675 ("Bluetooth: btusb: Don't suspend when there are connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
|
|
PSE controllers like the TPS23881 can forcefully turn off their
configuration state. In such cases, the is_enabled() and get_status()
callbacks will report the PSE as disabled, while admin_state_enabled
will show it as enabled. This mismatch can lead the user to attempt
to enable it, but no action is taken as admin_state_enabled remains set.
The solution is to disable the PSE before enabling it, ensuring the
actual status matches admin_state_enabled.
Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241002121706.246143-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- PERF_TYPE_BREAKPOINT now returns -EOPNOTSUPP instead of -ENOENT,
which aligns to other ports and is a saner value
- The KASAN-related stack size increasing logic has been moved to a C
header, to avoid dependency issues
* tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix kernel stack size when KASAN is enabled
drivers/perf: riscv: Align errno for unsupported perf event
|
|
Previously, the TX header requirement for standard frames was ignored.
This requirement is a bitstring sent from the VIOS which maps to the
type of header information needed during TX. If no header information,
is needed then send subcrq direct can be used (which can be more
performant).
This bitstring was previously ignored for standard packets (AKA non LSO,
non CSO) due to the belief that the bitstring was over-cautionary. It
turns out that there are some configurations where the backing device
does need header information for transmission of standard packets. If
the information is not supplied then this causes continuous "Adapter
error" transport events. Therefore, this bitstring should be respected
and observed before considering the use of send subcrq direct.
Fixes: 74839f7a8268 ("ibmvnic: Introduce send sub-crq direct")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163200.1802522-2-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the core and one in the
intel_pstate driver:
- Fix CPU device node reference counting in the cpufreq core (Miquel
Sabaté Solà)
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König)"
* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid a bad reference count on CPU node
cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential NULL-pointer dereference in gpiolib core
- fix a probe() regression from the v6.12 merge window and an older bug
leading to missed interrupts in gpio-davinci
* tag 'gpio-fixes-for-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix potential NULL pointer dereference in gpiod_get_label()
gpio: davinci: Fix condition for irqchip registration
gpio: davinci: fix lazy disable
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, xe and amdgpu lead the way, with panthor, and few core
components getting various fixes. Nothing seems too out of the
ordinary.
atomic:
- Use correct type when reading damage rectangles
display:
- Fix kernel docs
dp-mst:
- Fix DSC decompression detection
hdmi:
- Fix infoframe size
sched:
- Update maintainers
- Fix race condition whne queueing up jobs
- Fix locking in drm_sched_entity_modify_sched()
- Fix pointer deref if entity queue changes
sysfb:
- Disable sysfb if framebuffer parent device is unknown
amdgpu:
- DML2 fix
- DSC fix
- Dispclk fix
- eDP HDR fix
- IPS fix
- TBT fix
i915:
- One fix for bitwise and logical "and" mixup in PM code
xe:
- Restore pci state on resume
- Fix locking on submission, queue and vm
- Fix UAF on queue destruction
- Fix resource release on freq init error path
- Use rw_semaphore to reduce contention on ASID->VM lookup
- Fix steering for media on Xe2_HPM
- Tuning updates to Xe2
- Resume TDR after GT reset to prevent jobs running forever
- Move id allocation to avoid userspace using a guessed number to
trigger UAF
- Fix OA stream close preventing pbatch buffers to complete
- Fix NPD when migrating memory on LNL
- Fix memory leak when aborting binds
panthor:
- Fix locking
- Set FOP_UNSIGNED_OFFSET in fops instance
- Acquire lock in panthor_vm_prepare_map_op_ctx()
- Avoid uninitialized variable in tick_ctx_cleanup()
- Do not block scheduler queue if work is pending
- Do not add write fences to the shared BOs
vbox:
- Fix VLA handling"
* tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Fix memory leak when aborting binds
drm/xe: Prevent null pointer access in xe_migrate_copy
drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close
drm/xe/queue: move xa_alloc to prevent UAF
drm/xe/vm: move xa_alloc to prevent UAF
drm/xe: Clean up VM / exec queue file lock usage.
drm/xe: Resume TDR after GT reset
drm/xe/xe2: Add performance tuning for L3 cache flushing
drm/xe/xe2: Extend performance tuning to media GT
drm/xe/mcr: Use Xe2_LPM steering tables for Xe2_HPM
drm/xe: Use helper for ASID -> VM in GPU faults and access counters
drm/xe: Convert to USM lock to rwsem
drm/xe: use devm_add_action_or_reset() helper
drm/xe: fix UAF around queue destruction
drm/xe/guc_submit: add missing locking in wedged_fini
drm/xe: Restore pci state upon resume
drm/amd/display: Fix system hang while resume with TBT monitor
drm/amd/display: Enable idle workqueue for more IPS modes
drm/amd/display: Add HDR workaround for specific eDP
drm/amd/display: avoid set dispclk to 0
...
|
|
The blamed commit introduced an unexpected regression in the sja1105
driver. Packets from VLAN-unaware bridge ports get received correctly,
but the protocol stack can't seem to decode them properly.
For ds->untag_bridge_pvid users (thus also sja1105), the blamed commit
did introduce a functional change: dsa_switch_rcv() used to call
dsa_untag_bridge_pvid(), which looked like this:
err = br_vlan_get_proto(br, &proto);
if (err)
return skb;
/* Move VLAN tag from data to hwaccel */
if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) {
skb = skb_vlan_untag(skb);
if (!skb)
return NULL;
}
and now it calls dsa_software_vlan_untag() which has just this:
/* Move VLAN tag from data to hwaccel */
if (!skb_vlan_tag_present(skb)) {
skb = skb_vlan_untag(skb);
if (!skb)
return NULL;
}
thus lacks any skb->protocol == bridge VLAN protocol check. That check
is deferred until a later check for skb->vlan_proto (in the hwaccel area).
The new code is problematic because, for VLAN-untagged packets,
skb_vlan_untag() blindly takes the 4 bytes starting with the EtherType
and turns them into a hwaccel VLAN tag. This is what breaks the protocol
stack.
It would be tempting to "make it work as before" and only call
skb_vlan_untag() for those packets with the skb->protocol actually
representing a VLAN.
But the premise of the newly introduced dsa_software_vlan_untag() core
function is not wrong. Drivers set ds->untag_bridge_pvid or
ds->untag_vlan_aware_bridge_pvid presumably because they send all
traffic to the CPU reception path as VLAN-tagged. So why should we spend
any additional CPU cycles assuming that the packet may be VLAN-untagged?
And why does the sja1105 driver opt into ds->untag_bridge_pvid if it
doesn't always deliver packets to the CPU as VLAN-tagged?
The answer to the latter question is indeed more interesting: it doesn't
need to. This got done in commit 884be12f8566 ("net: dsa: sja1105: add
support for imprecise RX"), because I thought it would be needed, but I
didn't realize that it doesn't actually make a difference.
As explained in the commit message of the blamed patch, ds->untag_bridge_pvid
only makes a difference in the VLAN-untagged receive path of a bridge port.
However, in that operating mode, tag_sja1105.c makes use of VLAN tags
with the ETH_P_SJA1105 TPID, and it decodes and consumes these VLAN tags
as if they were DSA tags (aka tag_8021q operation). Even if commit
884be12f8566 ("net: dsa: sja1105: add support for imprecise RX") added
this logic in sja1105_bridge_vlan_add():
/* Always install bridge VLANs as egress-tagged on the CPU port. */
if (dsa_is_cpu_port(ds, port))
flags = 0;
that was for _bridge_ VLANs, which are _not_ committed to hardware
in VLAN-unaware mode (aka the mode where ds->untag_bridge_pvid does
anything at all). Even prior to that change, the tag_8021q VLANs
were always installed as egress-tagged on the CPU port, see
dsa_switch_tag_8021q_vlan_add():
u16 flags = 0; // egress-tagged, non-PVID
if (dsa_port_is_user(dp))
flags |= BRIDGE_VLAN_INFO_UNTAGGED |
BRIDGE_VLAN_INFO_PVID;
err = dsa_port_do_tag_8021q_vlan_add(dp, info->vid,
flags);
if (err)
return err;
Whether the sja1105 driver needs the new flag, ds->untag_vlan_aware_bridge_pvid,
rather than ds->untag_bridge_pvid, is a separate discussion. To fix the
current bug in VLAN-unaware bridge mode, I would argue that the sja1105
driver should not request something it doesn't need, rather than
complicating the core DSA helper. Whereas before the blamed commit, this
setting was harmless, now it has caused breakage.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241001140206.50933-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix another use-after-free in aoe
- Fixup wrong nested non-saving irq disable/restore in blk-iocost
- Fixup a kerneldoc complaint introduced by a merge window patch
* tag 'block-6.12-20241004' of git://git.kernel.dk/linux:
aoe: fix the potential use-after-free problem in more places
blk_iocost: remove some duplicate irq disable/enables
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
Merge an ACPI backlight (video) quirk and ACPI battery driver fix and
cleanup for 6.12-rc2:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight (video)
driver (Hans de Goede).
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf).
* acpi-video:
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
* acpi-battery:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
|
|
The object pointed to by tz->tzp may still be accessed after being
freed in thermal_zone_device_unregister(), so move the freeing of it
to the point after the removal completion has been completed at which
it cannot be accessed any more.
Fixes: 3d439b1a2ad3 ("thermal/core: Alloc-copy-free the thermal zone parameters structure")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4623516.LvFx2qVVIh@rjwysocki.net
|
|
There are places in the thermal netlink code where nothing prevents
the thermal zone object from going away while being accessed after it
has been returned by thermal_zone_get_by_id().
To address this, make thermal_zone_get_by_id() get a reference on the
thermal zone device object to be returned with the help of get_device(),
under thermal_list_lock, and adjust all of its callers to this change
with the help of the cleanup.h infrastructure.
Fixes: 1ce50e7d408e ("thermal: core: genetlink support for events/cmd/sampling")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6112242.lOV4Wx5bFT@rjwysocki.net
|
|
I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD,
and other from ASMEDIA. The one from ASMEDIA have problems when resume
from suspend, and keep broken until unplug the power cord. I use this
kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a
path to reset only the ASMEDIA xhci.
Signed-off-by: Jose Alberto Reguero <jose.alberto.reguero@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240919184202.22249-1-jose.alberto.reguero@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
support
Introduce new kernel config symbol for Microchip usb5744 SMBus programming
support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these
APIs should only be invoked when kernel has I2C support. This new kernel
config describes the dependency on I2C kernel support and fix the below
build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m.
riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o:
undefined reference to `i2c_find_device_by_fwnode'
drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined
reference to `i2c_smbus_write_block_data'
<snip>
Parsing of the i2c-bus bus handle is not put under usb5744 kernel config
check as the intention is to report an error when DT is configured for
usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled.
Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Suggested-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/
Acked-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Link: https://lore.kernel.org/r/1727529992-476088-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.
Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When dwc3_resume_common() returns an error, runtime pm is left in
suspended and disabled state in dwc3_resume(). Since the device
is suspended, its parent devices (like the power domain or glue
driver) could also be suspended and may have released resources
that dwc requires. Consequently, calling dwc3_suspend_common() in
this situation could result in attempts to access unclocked or
unpowered registers.
To prevent these problems, runtime PM should always be re-enabled,
even after failed resume attempts. This ensures that
dwc3_suspend_common() is skipped in such cases.
Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
JieLi tends to use SCSI via USB Mass Storage to implement their own
proprietary commands instead of implementing another USB interface.
Enumerating it as a generic mass storage device will lead to a Hardware
Error sense key get reported.
Ignore this bogus device to prevent appearing a unusable sdX device
file.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241001083407.8336-1-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Registering a gadget driver is expected to complete synchronously and
immediately after calling driver_register() this function checks that
the driver has bound so as to return an error.
Set PROBE_FORCE_SYNCHRONOUS to ensure this is the case even when
asynchronous probing is set as the default.
Fixes: fc274c1e99731 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240913102325.2826261-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the uninitialized symbol 'rv' in the function ish_fw_xfer_direct_dma
to resolve the following warning from the smatch tool:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:714 ish_fw_xfer_direct_dma()
error: uninitialized symbol 'rv'.
Initialize 'rv' to 0 to prevent undefined behavior from uninitialized
access.
Cc: stable@vger.kernel.org
Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241004075944.44932-1-surajsonawane0215@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The only input fc_rport_set_marginal_state() currently accepts is
"Marginal" when port_state is "Online", and "Online" when the port_state
is "Marginal". It should also allow setting port_state to its current
state, either "Marginal or "Online".
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240917230643.966768-1-bmarzins@redhat.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93:
Move the SCSI pointer to private command data") which results in an oops
in wd33c93_intr(). That commit added the scsi_pointer variable and
initialized it from hostdata->connected. However, during selection,
hostdata->connected is not yet valid. Fix this by getting the current
scsi_pointer from hostdata->selecting.
Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: stable@kernel.org
Fixes: dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/09e11a0a54e6aa2a88bd214526d305aaf018f523.1727926187.git.fthain@linux-m68k.org
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After commit 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a
work queue"), it can happen that a work item is sent to an uninitialized
work queue. This may has the effect that the item being queued is never
actually queued, and any further actions depending on it will not
proceed.
The following warning is observed while the fnic driver is loaded:
kernel: WARNING: CPU: 11 PID: 0 at ../kernel/workqueue.c:1524 __queue_work+0x373/0x410
kernel: <IRQ>
kernel: queue_work_on+0x3a/0x50
kernel: fnic_wq_copy_cmpl_handler+0x54a/0x730 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: fnic_isr_msix_wq_copy+0x2d/0x60 [fnic 62fbff0c42e7fb825c60a55cde2fb91facb2ed24]
kernel: __handle_irq_event_percpu+0x36/0x1a0
kernel: handle_irq_event_percpu+0x30/0x70
kernel: handle_irq_event+0x34/0x60
kernel: handle_edge_irq+0x7e/0x1a0
kernel: __common_interrupt+0x3b/0xb0
kernel: common_interrupt+0x58/0xa0
kernel: </IRQ>
It has been observed that this may break the rediscovery of Fibre
Channel devices after a temporary fabric failure.
This patch fixes it by moving the work queue initialization out of
an if block in fnic_probe().
Signed-off-by: Martin Wilck <mwilck@suse.com>
Fixes: 379a58caa199 ("scsi: fnic: Move fnic_fnic_flush_tx() to a work queue")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240930133014.71615-1-mwilck@suse.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace manual offset calculations for response_upiu and prd_table in
ufshcd_init_lrb() with pre-calculated offsets already stored in the
utp_transfer_req_desc structure. The pre-calculated offsets are set
differently in ufshcd_host_memory_configure() based on the
UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk, ensuring correct alignment and
access.
Fixes: 26f968d7de82 ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: stable@vger.kernel.org
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240910044543.3812642-1-avri.altman@wdc.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Restore pci state on resume (Rodrigo Vivi)
- Fix locking on submission, queue and vm (Matthew Auld, Matthew Brost)
- Fix UAF on queue destruction (Matthew Auld)
- Fix resource release on freq init error path (He Lugang)
- Use rw_semaphore to reduce contention on ASID->VM lookup (Matthew Brost)
- Fix steering for media on Xe2_HPM (Gustavo Sousa)
- Tuning updates to Xe2 (Gustavo Sousa)
- Resume TDR after GT reset to prevent jobs running forever (Matthew Brost)
- Move id allocation to avoid userspace using a guessed number
to trigger UAF (Matthew Auld, Matthew Brost)
- Fix OA stream close preventing pbatch buffers to complete (José)
- Fix NPD when migrating memory on LNL (Zhanjun Dong)
- Fix memory leak when aborting binds (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fiv63yanlal5mpw3mxtotte6yvkvtex74c7mkjxca4bazlyja@o4iejcfragxy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-09-30 (ice, idpf)
This series contains updates to ice and idpf drivers:
For ice:
Michal corrects setting of dst VSI on LAN filters and adds clearing of
port VLAN configuration during reset.
Gui-Dong Han corrects failures to decrement refcount in some error
paths.
Przemek resolves a memory leak in ice_init_tx_topology().
Arkadiusz prevents setting of DPLL_PIN_STATE_SELECTABLE to an improper
value.
Dave stops clearing of VLAN tracking bit to allow for VLANs to be properly
restored after reset.
For idpf:
Ahmed sets uninitialized dyn_ctl_intrvl_s value.
Josh corrects use and reporting of mailbox size.
Larysa corrects order of function calls during de-initialization.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: deinit virtchnl transaction manager after vport and vectors
idpf: use actual mbx receive payload length
idpf: fix VF dynamic interrupt ctl register initialization
ice: fix VLAN replay after reset
ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pins
ice: fix memleak in ice_init_tx_topology()
ice: clear port vlan config during reset
ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count()
ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins()
ice: set correct dst VSI in only LAN filters
====================
Link: https://patch.msgid.link/20240930223601.3137464-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the use of phy_set_max_speed in phy driver as the
function is mainly used in MAC driver to set the max
speed.
Instead use get_features to fix up Phy PMA capabilities for
AQR111, AQR111B0, AQR114C and AQCS109
Fixes: 038ba1dc4e54 ("net: phy: aquantia: add AQR111 and AQR111B0 PHY ID")
Fixes: 0974f1f03b07 ("net: phy: aquantia: remove false 5G and 10G speed ability for AQCS109")
Fixes: c278ec644377 ("net: phy: aquantia: add support for AQR114C PHY ID")
Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241001224626.2400222-3-quic_abchauha@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AQR115c reports incorrect PMA capabilities which includes
10G/5G and also incorrectly disables capabilities like autoneg
and 10Mbps support.
AQR115c as per the Marvell databook supports speeds up to 2.5Gbps
with autonegotiation.
Fixes: 0ebc581f8a4b ("net: phy: aquantia: add support for aqr115c")
Link: https://lore.kernel.org/all/20240913011635.1286027-1-quic_abchauha@quicinc.com/T/
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20241001224626.2400222-2-quic_abchauha@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yury reported a crash in the sfc driver originated from
netpoll_send_udp(). The netconsole sends a message and then netpoll
invokes the driver's NAPI function with a budget of zero. It is
dedicated to allow driver to free TX resources, that it may have used
while sending the packet.
In the netpoll case the driver invokes xdp_do_flush() unconditionally,
leading to crash because bpf_net_context was never assigned.
Invoke xdp_do_flush() only if budget is not zero.
Fixes: 401cb7dae8130 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Reported-by: Yury Vostrikov <mon@unformed.ru>
Closes: https://lore.kernel.org/5627f6d1-5491-4462-9d75-bc0612c26a22@app.fastmail.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241002125837.utOcRo6Y@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When configuring the fiber port, the DP83869 PHY driver incorrectly
calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit
number (10). This corrupts some other memory location -- in case of
arm64 the priv pointer in the same structure.
Since the advertising flags are updated from supported at the end of the
function the incorrect line isn't needed at all and can be removed.
Fixes: a29de52ba2a1 ("net: dp83869: Add ability to advertise Fiber connection")
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241002161807.440378-1-inguin@gmx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mutex field has two following semicolons, replace this with just
one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917120856.1877733-1-colin.i.king@gmail.com
|
|
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") added a mutex_lock() call for the queue->queue_lock
in nvme_tcp_get_address(). However, the mutex_lock() races with
mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220
Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs]
CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:__mutex_lock+0xcf0/0x1220
Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1
RSP: 0018:ffff88811305f760 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341
R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058
FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn.cold+0x5b/0x1af
? __mutex_lock+0xcf0/0x1220
? report_bug+0x1ec/0x390
? handle_bug+0x3c/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? __mutex_lock+0xcf0/0x1220
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xd6a/0x59e0
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp]
nvme_sysfs_show_address+0x81/0xc0 [nvme_core]
dev_attr_show+0x42/0x80
? __asan_memset+0x1f/0x40
sysfs_kf_seq_show+0x1f0/0x370
seq_read_iter+0x2cb/0x1130
? rw_verify_area+0x3b1/0x590
? __mutex_lock+0x433/0x1220
vfs_read+0x6a6/0xa20
? lockdep_hardirqs_on+0x78/0x100
? __pfx_vfs_read+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
? __x64_sys_openat+0x105/0x1d0
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? __pfx_ksys_read+0x10/0x10
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? do_syscall_64+0x9f/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f9713f55cfa
Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b
RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa
RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011
RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148
R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0
</TASK>
The WARN is observed when the blktests test case nvme/014 is repeated
with tcp transport. It is rare, and 200 times repeat is required to
recreate in some test environments.
To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking
queue->queue_lock. The flag is cleared long time before the lock gets
destroyed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may
return a NULL pointer, leading to a scenario where `label->str` is accessed
without verifying if `label` itself is NULL.
This patch adds a proper NULL check for `label` before accessing
`label->str`. The check for `label->str != NULL` is removed because
`label->str` can never be NULL if `label` is not NULL.
This fixes the issue where the label name was being printed as `(efault)`
when dumping the sysfs GPIO file when `label == NULL`.
Fixes: 5a646e03e956 ("gpiolib: Return label, if set, for IRQ only line")
Fixes: a86d27693066 ("gpiolib: fix the speed of descriptor label setting with SRCU")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241003131351.472015-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v6.12-2
Fixes a few issues with Intel pin control platform driver:
* fix missing reference counter drop of fwnode on error path
* replace comma by semicolon to follow the kernel style
* add Panther Lake to the list of supported devices
The following is an automated git shortlog grouped by driver:
intel:
- platform: Add Panther Lake to the list of supported
- platform: use semicolon instead of comma in ncommunities assignment
- platform: fix error path in device_for_each_child_node()
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Intel Panther Lake is supported by the generic platform driver,
so add it to the list of supported in Kconfig.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Make sure to call xe_pt_update_ops_fini in xe_pt_update_ops_abort to
free any memory the bind allocated.
Caught by kmemleak when running Vulkan CTS tests on LNL. The leak
seems to happen only when there's some kind of failure happening, like
the lack of memory. Example output:
unreferenced object 0xffff9120bdf62000 (size 8192):
comm "deqp-vk", pid 115008, jiffies 4310295728
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 1b 05 f9 28 01 00 00 40 ...........(...@
00 00 00 00 00 00 00 00 1b 15 f9 28 01 00 00 40 ...........(...@
backtrace (crc 7a56be79):
[<ffffffff86dd81f0>] __kmalloc_cache_noprof+0x310/0x3d0
[<ffffffffc08e8211>] xe_pt_new_shared.constprop.0+0x81/0xb0 [xe]
[<ffffffffc08e8309>] xe_pt_insert_entry+0xb9/0x140 [xe]
[<ffffffffc08eab6d>] xe_pt_stage_bind_entry+0x12d/0x5b0 [xe]
[<ffffffffc08ecbca>] xe_pt_walk_range+0xea/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08e9eff>] xe_pt_stage_bind.constprop.0+0x25f/0x580 [xe]
[<ffffffffc08eb21a>] bind_op_prepare+0xea/0x6e0 [xe]
[<ffffffffc08ebab8>] xe_pt_update_ops_prepare+0x1c8/0x440 [xe]
[<ffffffffc08ffbf3>] ops_execute+0x143/0x850 [xe]
[<ffffffffc0900b64>] vm_bind_ioctl_ops_execute+0x244/0x800 [xe]
[<ffffffffc0906467>] xe_vm_bind_ioctl+0x1877/0x2370 [xe]
[<ffffffffc05e92b3>] drm_ioctl_kernel+0xb3/0x110 [drm]
unreferenced object 0xffff9120bdf72000 (size 8192):
comm "deqp-vk", pid 115008, jiffies 4310295728
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 23b2f0b5):
[<ffffffff86dd81f0>] __kmalloc_cache_noprof+0x310/0x3d0
[<ffffffffc08e8211>] xe_pt_new_shared.constprop.0+0x81/0xb0 [xe]
[<ffffffffc08e8453>] xe_pt_stage_unbind_post_descend+0xb3/0x150 [xe]
[<ffffffffc08ecd26>] xe_pt_walk_range+0x246/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08eccea>] xe_pt_walk_range+0x20a/0x280 [xe]
[<ffffffffc08ece31>] xe_pt_walk_shared+0xc1/0x110 [xe]
[<ffffffffc08e7b2a>] xe_pt_stage_unbind+0x9a/0xd0 [xe]
[<ffffffffc08e913d>] unbind_op_prepare+0xdd/0x270 [xe]
[<ffffffffc08eb9f6>] xe_pt_update_ops_prepare+0x106/0x440 [xe]
[<ffffffffc08ffbf3>] ops_execute+0x143/0x850 [xe]
[<ffffffffc0900b64>] vm_bind_ioctl_ops_execute+0x244/0x800 [xe]
[<ffffffffc0906467>] xe_vm_bind_ioctl+0x1877/0x2370 [xe]
[<ffffffffc05e92b3>] drm_ioctl_kernel+0xb3/0x110 [drm]
[<ffffffffc05e95a0>] drm_ioctl+0x280/0x4e0 [drm]
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2877
Fixes: a708f6501c69 ("drm/xe: Update PT layer with better error handling")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927232228.3255246-1-matthew.brost@intel.com
(cherry picked from commit 63e0695597a044c96bf369e4d8ba031291449d95)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
xe_migrate_copy designed to copy content of TTM resources. When source
resource is null, it will trigger a NULL pointer dereference in
xe_migrate_copy. To avoid this situation, update lacks source flag to
true for this case, the flag will trigger xe_migrate_clear rather than
xe_migrate_copy.
Issue trace:
<7> [317.089847] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 14,
sizes: 4194304 & 4194304
<7> [317.089945] xe 0000:00:02.0: [drm:xe_migrate_copy [xe]] Pass 15,
sizes: 4194304 & 4194304
<1> [317.128055] BUG: kernel NULL pointer dereference, address:
0000000000000010
<1> [317.128064] #PF: supervisor read access in kernel mode
<1> [317.128066] #PF: error_code(0x0000) - not-present page
<6> [317.128069] PGD 0 P4D 0
<4> [317.128071] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4> [317.128074] CPU: 1 UID: 0 PID: 1440 Comm: kunit_try_catch Tainted:
G U N 6.11.0-rc7-xe #1
<4> [317.128078] Tainted: [U]=USER, [N]=TEST
<4> [317.128080] Hardware name: Intel Corporation Lunar Lake Client
Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D80.2407291239 07/29/2024
<4> [317.128082] RIP: 0010:xe_migrate_copy+0x66/0x13e0 [xe]
<4> [317.128158] Code: 00 00 48 89 8d e0 fe ff ff 48 8b 40 10 4c 89 85 c8
fe ff ff 44 88 8d bd fe ff ff 65 48 8b 3c 25 28 00 00 00 48 89 7d d0 31
ff <8b> 79 10 48 89 85 a0 fe ff ff 48 8b 00 48 89 b5 d8 fe ff ff 83 ff
<4> [317.128162] RSP: 0018:ffffc9000167f9f0 EFLAGS: 00010246
<4> [317.128164] RAX: ffff8881120d8028 RBX: ffff88814d070428 RCX:
0000000000000000
<4> [317.128166] RDX: ffff88813cb99c00 RSI: 0000000004000000 RDI:
0000000000000000
<4> [317.128168] RBP: ffffc9000167fbb8 R08: ffff88814e7b1f08 R09:
0000000000000001
<4> [317.128170] R10: 0000000000000001 R11: 0000000000000001 R12:
ffff88814e7b1f08
<4> [317.128172] R13: ffff88814e7b1f08 R14: ffff88813cb99c00 R15:
0000000000000001
<4> [317.128174] FS: 0000000000000000(0000) GS:ffff88846f280000(0000)
knlGS:0000000000000000
<4> [317.128176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [317.128178] CR2: 0000000000000010 CR3: 000000011f676004 CR4:
0000000000770ef0
<4> [317.128180] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
<4> [317.128182] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7:
0000000000000400
<4> [317.128184] PKRU: 55555554
<4> [317.128185] Call Trace:
<4> [317.128187] <TASK>
<4> [317.128189] ? show_regs+0x67/0x70
<4> [317.128194] ? __die_body+0x20/0x70
<4> [317.128196] ? __die+0x2b/0x40
<4> [317.128198] ? page_fault_oops+0x15f/0x4e0
<4> [317.128203] ? do_user_addr_fault+0x3fb/0x970
<4> [317.128205] ? lock_acquire+0xc7/0x2e0
<4> [317.128209] ? exc_page_fault+0x87/0x2b0
<4> [317.128212] ? asm_exc_page_fault+0x27/0x30
<4> [317.128216] ? xe_migrate_copy+0x66/0x13e0 [xe]
<4> [317.128263] ? __lock_acquire+0xb9d/0x26f0
<4> [317.128265] ? __lock_acquire+0xb9d/0x26f0
<4> [317.128267] ? sg_free_append_table+0x20/0x80
<4> [317.128271] ? lock_acquire+0xc7/0x2e0
<4> [317.128273] ? mark_held_locks+0x4d/0x80
<4> [317.128275] ? trace_hardirqs_on+0x1e/0xd0
<4> [317.128278] ? _raw_spin_unlock_irqrestore+0x31/0x60
<4> [317.128281] ? __pm_runtime_resume+0x60/0xa0
<4> [317.128284] xe_bo_move+0x682/0xc50 [xe]
<4> [317.128315] ? lock_is_held_type+0xaa/0x120
<4> [317.128318] ttm_bo_handle_move_mem+0xe5/0x1a0 [ttm]
<4> [317.128324] ttm_bo_validate+0xd1/0x1a0 [ttm]
<4> [317.128328] shrink_test_run_device+0x721/0xc10 [xe]
<4> [317.128360] ? find_held_lock+0x31/0x90
<4> [317.128363] ? lock_release+0xd1/0x2a0
<4> [317.128365] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10
[kunit]
<4> [317.128370] xe_bo_shrink_kunit+0x11/0x20 [xe]
<4> [317.128397] kunit_try_run_case+0x6e/0x150 [kunit]
<4> [317.128400] ? trace_hardirqs_on+0x1e/0xd0
<4> [317.128402] ? _raw_spin_unlock_irqrestore+0x31/0x60
<4> [317.128404] kunit_generic_run_threadfn_adapter+0x1e/0x40 [kunit]
<4> [317.128407] kthread+0xf5/0x130
<4> [317.128410] ? __pfx_kthread+0x10/0x10
<4> [317.128412] ret_from_fork+0x39/0x60
<4> [317.128415] ? __pfx_kthread+0x10/0x10
<4> [317.128416] ret_from_fork_asm+0x1a/0x30
<4> [317.128420] </TASK>
Fixes: 266c85885263 ("drm/xe/xe2: Handle flat ccs move for igfx.")
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927161308.862323-2-zhanjun.dong@intel.com
(cherry picked from commit 59a1c9c7e1d02b43b415ea92627ce095b7c79e47)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Mesa testing on Xe2+ revealed that when OA metrics are collected for an
exec_queue, after the OA stream is closed, future batch buffers submitted
on that exec_queue do not complete. Not resetting OAC_CONTEXT_ENABLE on OA
stream close resolves these hangs and should not have any adverse effects.
v2: Make the change that we don't reset the bit clearer (Ashutosh)
Also make the same fix for OAC as OAR (Ashutosh)
Bspec: 60314
Fixes: 2f4a730fcd2d ("drm/xe/oa: Add OAR support")
Fixes: 14e077f8006d ("drm/xe/oa: Add OAC support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2821
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924213713.3497992-1-ashutosh.dixit@intel.com
(cherry picked from commit 0c8650b09a365f4a31fca1d1d1e9d99c56071128)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Evil user can guess the next id of the queue before the ioctl completes
and then call queue destroy ioctl to trigger UAF since create ioctl is
still referencing the same queue. Move the xa_alloc all the way to the end
to prevent this.
v2:
- Rebase
Fixes: 2149ded63079 ("drm/xe: Fix use after free when client stats are captured")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925071426.144015-4-matthew.auld@intel.com
(cherry picked from commit 16536582ddbebdbdf9e1d7af321bbba2bf955a87)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Evil user can guess the next id of the vm before the ioctl completes and
then call vm destroy ioctl to trigger UAF since create ioctl is still
referencing the same vm. Move the xa_alloc all the way to the end to
prevent this.
v2:
- Rebase
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240925071426.144015-3-matthew.auld@intel.com
(cherry picked from commit dcfd3971327f3ee92765154baebbaece833d3ca9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Both the VM / exec queue file lock protect the lookup and reference to
the object, nothing more. These locks are not intended anything else
underneath them. XA have their own locking too, so no need to take the
VM / exec queue file lock aside from when doing a lookup and reference
get.
Add some kernel doc to make this clear and cleanup a few typos too.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240921011712.2681510-1-matthew.brost@intel.com
(cherry picked from commit fe4f5d4b661666a45b48fe7f95443f8fefc09c8c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Not starting the TDR after GT reset on exec queue which have been
restarted can lead to jobs being able to be run forever. Fix this by
restarting the TDR.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240724235919.1917216-1-matthew.brost@intel.com
(cherry picked from commit 8ec5a4e5ce97d6ee9f5eb5b4ce4cfc831976fdec)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
