summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-07-06net/mlx5e: kTLS, Fix build time constant test in RXTariq Toukan
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison against the size of the private RX TLS driver context. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5e: kTLS, Fix build time constant test in TXTariq Toukan
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison against the size of the private TX TLS driver context. Fixes: df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: Lag, decouple FDB selection and shared FDBMark Bloch
Multiport eswitch is required to use native FDB selection instead of affinity, This was achieved by passing the shared_fdb flag down the HW lag creation path. While it did accomplish the goal of setting FDB selection mode to native, it had the side effect of also creating a shared FDB configuration. This created a few issues: - TC rules are inserted into a non active FDB, which means traffic isn't offloaded as all traffic will reach only a single FDB. - All wire traffic is treated as if a single physical port received it; while this is true for a bond configuration, this shouldn't be the case for multiport eswitch. Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE to indicate what FDB selection mode should be used. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06net/mlx5: TC, allow offload from uplink to other PF's VFEli Cohen
Redirecting traffic from uplink to a VF is a legal operation of mulitport eswitch mode. Remove the limitation. Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-06spi: Merge AMD fixMark Brown
Work around problems with large transfers.
2022-07-06nvme: use struct group for generic command dwordsKeith Busch
This will allow the trace event to know the full size of the data intended to be copied and silence read overflow checks. Reported-by: John Garry <john.garry@huawei.com> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-06Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fixes from Stafford Horne: "Fixups for OpenRISC found during recent testing: - An OpenRISC irqchip fix to stop acking level interrupts which was causing issues on SMP platforms - A comment typo fix in our unwinder code" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: unwinder: Fix grammar issue in comment irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
2022-07-06Merge tag 'irqchip-fixes-5.19-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zygnier: - Gracefully handle failure to request MMIO resources in the GICv3 driver - Make a static key static in the Apple AIC driver - Fix the Xilinx intc driver dependency on OF_ADDRESS Link: https://lore.kernel.org/all/20220701133531.1545319-1-maz@kernel.org
2022-07-06nvme-pci: phison e16 has bogus namespace idsKeith Busch
Add the quirk. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049 Reported-by: Chris Egolf <cegolf@ugholf.net> Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-06fbdev: fbmem: Fix logo center image dx issueGuiling Deng
Image.dx gets wrong value because of missing '()'. If xres == logo->width and n == 1, image.dx = -16. Signed-off-by: Guiling Deng <greens9@163.com> Fixes: 3d8b1933eb1c ("fbdev: fbmem: add config option to center the bootup logo") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-06spi: amd: Limit max transfer and message sizeCristian Ciocaltea
Enabling the SPI CS35L41 audio codec driver for Steam Deck [1] revealed a problem with the current AMD SPI controller driver implementation, consisting of an unrecoverable system hang. The issue can be prevented if we ensure the max transfer size and the max message size do not exceed the FIFO buffer size. According to the implementation of the downstream driver, the AMD SPI controller is not able to handle more than 70 bytes per transfer, which corresponds to the size of the FIFO buffer. Hence, let's fix this by setting the SPI limits mentioned above. [1] https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com Reported-by: Anastasios Vacharakis <vacharakis@o2mail.de> Fixes: bbb336f39efc ("spi: spi-amd: Add AMD SPI controller driver support") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20220706100626.1234731-2-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-06net/mlx5e: Fix matchall police parameters validationVlad Buslov
Referenced commit prepared the code for upcoming extension that allows mlx5 to offload police action attached to flower classifier. However, with regard to existing matchall classifier offload validation should be reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police action and extend scan_tc_matchall_fdb_actions() to only allow such actions with matchall classifier. Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06iommu/vt-d: Fix RID2PASID setup/teardown failureLu Baolu
The IOMMU driver shares the pasid table for PCI alias devices. When the RID2PASID entry of the shared pasid table has been filled by the first device, the subsequent device will encounter the "DMAR: Setup RID2PASID failed" failure as the pasid entry has already been marked as present. As the result, the IOMMU probing process will be aborted. On the contrary, when any alias device is hot-removed from the system, for example, by writing to /sys/bus/pci/devices/.../remove, the shared RID2PASID will be cleared without any notifications to other devices. As the result, any DMAs from those rest devices are blocked. Sharing pasid table among PCI alias devices could save two memory pages for devices underneath the PCIe-to-PCI bridges. Anyway, considering that those devices are rare on modern platforms that support VT-d in scalable mode and the saved memory is negligible, it's reasonable to remove this part of immature code to make the driver feasible and stable. Fixes: ef848b7e5a6a0 ("iommu/vt-d: Setup pasid entry for RID2PASID support") Reported-by: Chenyi Qiang <chenyi.qiang@intel.com> Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06iommu/vt-d: Fix PCI bus rescan device hot addYian Chen
Notifier calling chain uses priority to determine the execution order of the notifiers or listeners registered to the chain. PCI bus device hot add utilizes the notification mechanism. The current code sets low priority (INT_MIN) to Intel dmar_pci_bus_notifier and postpones DMAR decoding after adding new device into IOMMU. The result is that struct device pointer cannot be found in DRHD search for the new device's DMAR/IOMMU. Subsequently, the device is put under the "catch-all" IOMMU instead of the correct one. This could cause system hang when device TLB invalidation is sent to the wrong IOMMU. Invalidation timeout error and hard lockup have been observed and data inconsistency/crush may occur as well. This patch fixes the issue by setting a positive priority(1) for dmar_pci_bus_notifier while the priority of IOMMU bus notifier uses the default value(0), therefore DMAR decoding will be in advance of DRHD search for a new device to find the correct IOMMU. Following is a 2-step example that triggers the bug by simulating PCI device hot add behavior in Intel Sapphire Rapids server. echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove echo 1 > /sys/bus/pci/rescan Fixes: 59ce0515cdaf ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope") Cc: stable@vger.kernel.org # v3.15+ Reported-by: Zhang, Bernice <bernice.zhang@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Yian Chen <yian.chen@intel.com> Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06dmaengine: lgm: Fix an error handling path in intel_ldma_probe()Christophe JAILLET
ldma_clk_disable() calls both: clk_disable_unprepare(d->core_clk); reset_control_assert(d->rst); So, should devm_reset_control_get_optional() fail, core_clk should not be prepare_enable'd before it, otherwise it will never be disable_unprepare'd. Reorder the code to handle the error handling path as expected. Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/18504549bc4d2b62a72a02cb22a2e4d8e6a58720.1653241224.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: pl330: Fix lockdep warning about non-static keyDmitry Osipenko
The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated spinlocks. The lockdep warns about this and disables locking validator. Fix the warning by making lock static. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Radxa ROCK Pi 4C (DT) Call trace: dump_backtrace.part.0+0xcc/0xe0 show_stack+0x18/0x6c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 register_lock_class+0x4a8/0x4cc __lock_acquire+0x78/0x20cc lock_acquire.part.0+0xe0/0x230 lock_acquire+0x68/0x84 _raw_spin_lock_irqsave+0x84/0xc4 add_desc+0x44/0xc0 pl330_get_desc+0x15c/0x1d0 pl330_prep_dma_cyclic+0x100/0x270 snd_dmaengine_pcm_trigger+0xec/0x1c0 dmaengine_pcm_trigger+0x18/0x24 ... Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05net: lan966x: hardcode the number of external portsMichael Walle
Instead of counting the child nodes in the device tree, hardcode the number of ports in the driver itself. The counting won't work at all if an ethernet port is marked as disabled, e.g. because it is not connected on the board at all. It turns out that the LAN9662 and LAN9668 use the same switching IP with the same synthesis parameters. The only difference is that the output ports are not connected. Thus, we can just hardcode the number of physical ports to 8. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05vfio: Move IOMMU_CAP_CACHE_COHERENCY test to after we know we have a groupJason Gunthorpe
The test isn't going to work if a group doesn't exist. Normally this isn't a problem since VFIO isn't going to create a device if there is no group, but the special CONFIG_VFIO_NOIOMMU behavior allows bypassing this prevention. The new cap test effectively forces a group and breaks this config option. Move the cap test to vfio_group_find_or_alloc() which is the earliest time we know we have a group available and thus are not running in noiommu mode. Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-e8934b490f36+f4-vfio_cap_fix_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-07-05ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supportedMario Limonciello
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported") added support for claiming to support CPPC in _OSC on non-Intel platforms. This unfortunately caused a regression on a vartiety of AMD platforms in the field because a number of AMD platforms don't set the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support. As these AMD platforms already claim CPPC support via a dedicated MSR from `X86_FEATURE_CPPC`, use this enable this feature rather than requiring the `_OSC` on platforms with a dedicated MSR. If there is additional breakage on the shared memory designs also missing this _OSC, additional follow up changes may be needed. Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported") Reported-by: Perry Yuan <perry.yuan@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05ACPI: CPPC: Only probe for _CPC if CPPC v2 is ackedMario Limonciello
Previously the kernel used to ignore whether the firmware masked CPPC or CPPCv2 and would just pretend that it worked. When support for the USB4 bit in _OSC was introduced from commit 9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear") the kernel began to look at the return when the query bit was clear. This caused regressions that were misdiagnosed and attempted to be solved as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag""). This caused a different regression where non-Intel systems weren't able to negotiate _OSC properly. This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"") and attempted to be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") but the regression still returned. These systems with the regression only load support for CPPC from an SSDT dynamically when _OSC reports CPPC v2. Avoid the problem by not letting CPPC satisfy the requirement in `acpi_cppc_processor_probe`. Reported-by: CUI Hao <cuihao.leo@gmail.com> Reported-by: maxim.novozhilov@gmail.com Reported-by: lethe.tree@protonmail.com Reported-by: garystephenwright@gmail.com Reported-by: galaxyking0419@gmail.com Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware") Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387 Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: CUI Hao <cuihao.leo@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-05Merge tag 'xsa-5.19-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen security fixes from Juergen Gross: - XSA-403 (4 patches for blkfront and netfront drivers): Linux Block and Network PV device frontends don't zero memory regions before sharing them with the backend (CVE-2022-26365, CVE-2022-33740). Additionally the granularity of the grant table doesn't allow sharing less than a 4K page, leading to unrelated data residing in the same 4K page as data shared with a backend being accessible by such backend (CVE-2022-33741, CVE-2022-33742). - XSA-405 (1 patch for netfront driver, only 5.10 and newer): While adding logic to support XDP (eXpress Data Path), a code label was moved in a way allowing for SKBs having references (pointers) retained for further processing to nevertheless be freed. - XSA-406 (1 patch for Arm specific dom0 code): When mapping pages of guests on Arm, dom0 is using an rbtree to keep track of the foreign mappings. Updating of that rbtree is not always done completely with the related lock held, resulting in a small race window, which can be used by unprivileged guests via PV devices to cause inconsistencies of the rbtree. These inconsistencies can lead to Denial of Service (DoS) of dom0, e.g. by causing crashes or the inability to perform further mappings of other guests' memory pages. * tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/arm: Fix race in RB-tree based P2M accounting xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses() xen/blkfront: force data bouncing when backend is untrusted xen/netfront: force data bouncing when backend is untrusted xen/netfront: fix leaking data in shared pages xen/blkfront: fix leaking data in shared pages
2022-07-05gpio: vf610: fix compilation errorLeon Romanovsky
Fix compilation error by explicitly adding the missing include. drivers/gpio/gpio-vf610.c: In function ‘vf610_gpio_direction_input’: drivers/gpio/gpio-vf610.c:120:9: error: implicit declaration of function ‘pinctrl_gpio_direction_input’; did you mean ‘vf610_gpio_direction_input’? [-Werror=implicit-function-declaration] 120 | return pinctrl_gpio_direction_input(chip->base + gpio); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ | vf610_gpio_direction_input Fixes: 30a35c07d9e9 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-05dmaengine: idxd: Only call idxd_enable_system_pasid() if succeeded in ↵Jerry Snitselaar
enabling SVA feature On a Sapphire Rapids system if boot without intel_iommu=on, the IDXD driver will crash during probe in iommu_sva_bind_device(). [ 21.423729] BUG: kernel NULL pointer dereference, address: 0000000000000038 [ 21.445108] #PF: supervisor read access in kernel mode [ 21.450912] #PF: error_code(0x0000) - not-present page [ 21.456706] PGD 0 [ 21.459047] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 21.464004] CPU: 0 PID: 1420 Comm: kworker/0:3 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1 [ 21.464011] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021 [ 21.464015] Workqueue: events work_for_cpu_fn [ 21.464030] RIP: 0010:iommu_sva_bind_device+0x1d/0xe0 [ 21.464046] Code: c3 cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41 54 55 53 48 83 ec 08 48 8b 87 d8 02 00 00 <48> 8b 40 38 48 8b 50 10 48 83 7a 70 00 48 89 14 24 0f 84 91 00 00 [ 21.464050] RSP: 0018:ff7245d9096b7db8 EFLAGS: 00010296 [ 21.464054] RAX: 0000000000000000 RBX: ff1eadeec8a51000 RCX: 0000000000000000 [ 21.464058] RDX: ff7245d9096b7e24 RSI: 0000000000000000 RDI: ff1eadeec8a510d0 [ 21.464060] RBP: ff1eadeec8a51000 R08: ffffffffb1a12300 R09: ff1eadffbfce25b4 [ 21.464062] R10: ffffffffffffffff R11: 0000000000000038 R12: ffffffffc09f8000 [ 21.464065] R13: ff1eadeec8a510d0 R14: ff7245d9096b7e24 R15: ff1eaddf54429000 [ 21.464067] FS: 0000000000000000(0000) GS:ff1eadee7f600000(0000) knlGS:0000000000000000 [ 21.464070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.464072] CR2: 0000000000000038 CR3: 00000008c0e10006 CR4: 0000000000771ef0 [ 21.464074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 21.464076] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 21.464078] PKRU: 55555554 [ 21.464079] Call Trace: [ 21.464083] <TASK> [ 21.464092] idxd_pci_probe+0x259/0x1070 [idxd] [ 21.464121] local_pci_probe+0x3e/0x80 [ 21.464132] work_for_cpu_fn+0x13/0x20 [ 21.464136] process_one_work+0x1c4/0x380 [ 21.464143] worker_thread+0x1ab/0x380 [ 21.464147] ? _raw_spin_lock_irqsave+0x23/0x50 [ 21.464158] ? process_one_work+0x380/0x380 [ 21.464161] kthread+0xe6/0x110 [ 21.464168] ? kthread_complete_and_exit+0x20/0x20 [ 21.464172] ret_from_fork+0x1f/0x30 iommu_sva_bind_device() requires SVA has been enabled successfully on the IDXD device before it's called. Otherwise, iommu_sva_bind_device() will access a NULL pointer. If Intel IOMMU is disabled, SVA cannot be enabled and thus idxd_enable_system_pasid() and iommu_sva_bind_device() should not be called. Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling") Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Dave Jiang <dave.jiang@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/dmaengine/20220623170232.6whonfjuh3m5vcoy@cantor/ Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220626051648.14249-1-jsnitsel@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctlyMichael Walle
It seems that it is valid to have less than the requested number of descriptors. But what is not valid and leads to subsequent errors is to have zero descriptors. In that case, abort the probing. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220526135111.1470926-1-michael@walle.cc Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-04Merge tag 'linux-can-fixes-for-5.19-20220704' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-04Merge tag 'soc-fixes-5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of minor patches for Arm DTS files and soc specific drivers: - More reference counting bug fixes for DT nodes, and other trivial code fixes - Multiple code fixes for the Arm SCMI firmware driver to improve compatibility with firmware implementations. - A patch series for at91 to address power management issues from using the wrong DT compatible properties. - A series of patches to fix pad settings for NXP imx8mp to leave the configuration untouched from the boot loader - Additional DT fixes for qualcomm and NXP platforms - A boot time fix for stm32mp15 DT - Konrad Dybcio becomes an additional reviewer for the Qualcomm platforms" * tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) soc: qcom: smem: use correct format characters ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15 ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 ARM: dts: stm32: fix pwr regulators references to use scmi soc: ixp4xx/npe: Fix unused match warning ARM: at91: pm: Mark at91_pm_secure_init as __init ARM: at91: fix soc detection for SAM9X60 SiPs ARM: dts: at91: sama5d2_icp: fix eeprom compatibles ARM: dts: at91: sam9x60ek: fix eeprom compatible and size ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt ARM: at91: pm: use proper compatible for sama5d2's rtc arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings ...
2022-07-04drm/panfrost: Fix shrinker list corruption by madvise IOCTLDmitry Osipenko
Calling madvise IOCTL twice on BO causes memory shrinker list corruption and crashes kernel because BO is already on the list and it's added to the list again, while BO should be removed from the list before it's re-added. Fix it. Cc: stable@vger.kernel.org Fixes: 013b65101315 ("drm/panfrost: Add madvise and shrinker support") Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-3-dmitry.osipenko@collabora.com
2022-07-04drm/panfrost: Put mapping instead of shmem obj on ↵Dmitry Osipenko
panfrost_mmu_map_fault_addr() error When panfrost_mmu_map_fault_addr() fails, the BO's mapping should be unreferenced and not the shmem object which backs the mapping. Cc: stable@vger.kernel.org Fixes: bdefca2d8dc0 ("drm/panfrost: Add the panfrost_gem_mapping concept") Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-2-dmitry.osipenko@collabora.com
2022-07-04drm/rockchip: Detach from ARM DMA domain in attach_deviceSteven Price
Since commit 1ea2a07a532b ("iommu: Add DMA ownership management interfaces") the Rockchip display driver on the Firefly RK3288 fails to initialise properly. This is because ARM DMA domain is still attached. Let's follow the lead of exynos and tegra and add code to explicitly remove the ARM domain before attaching a new one. Fixes: 1ea2a07a532b ("iommu: Add DMA ownership management interfaces") Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220615154830.555422-1-steven.price@arm.com
2022-07-04drm/bridge: fsl-ldb: Drop DE signal polarity inversionLiu Ying
It's unnecessary to invert input data enable signal polarity according to the output one. Let's drop the inversion. Since ->atomic_check() does nothing more than the inversion, it can be dropped entirely as well. Without this patch, 'koe,tx26d202vm0bwa' LVDS panel connected with i.MX8MP EVK board does not show any data on screen. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-4-victor.liu@nxp.com
2022-07-04drm/bridge: fsl-ldb: Enable split mode for LVDS dual linkLiu Ying
When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-3-victor.liu@nxp.com
2022-07-04drm/bridge: fsl-ldb: Fix mode clock rate validationLiu Ying
With LVDS dual link, up to 160MHz mode clock rate is supported. With LVDS single link, up to 80MHz mode clock rate is supported. Fix mode clock rate validation by swapping the maximum mode clock rates of the two link modes. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-2-victor.liu@nxp.com
2022-07-04soc: qcom: smem: use correct format charactersBill Wendling
When compiling with -Wformat, clang emits the following warnings: drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "bad host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat] dev_err(smem->dev, "duplicate host %hu\n", remote_host); ~~~ ^~~~~~~~~~~ %u ./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err' dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__) ~~~ ^~~~~~~~~~~ ./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap' _p_func(dev, fmt, ##__VA_ARGS__); \ ~~~ ^~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct one and change type of remote_host to "u16" to match with other types. Signed-off-by: Bill Wendling <morbo@google.com> Tested-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Justin Stitt <jstitt007@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-04drm/aperture: Run fbdev removal before internal helpersThomas Zimmermann
Always run fbdev removal first to remove simpledrm via sysfb_disable(). This clears the internal state. The later call to drm_aperture_detach_drivers() then does nothing. Otherwise, with drm_aperture_detach_drivers() running first, the call to sysfb_disable() uses inconsistent state. Example backtrace show below: [ 11.663422] ================================================================== [ 11.663426] BUG: KASAN: use-after-free in device_del+0x79/0x5f0 [ 11.663435] Read of size 8 at addr ffff888108185050 by task systemd-udevd/311 [ 11.663440] CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5 .19.0-rc2-1-default+ #1689 [ 11.663445] Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011 [ 11.663447] Call Trace: [ 11.663449] <TASK> [ 11.663451] ? device_del+0x79/0x5f0 [ 11.663456] dump_stack_lvl+0x5b/0x73 [ 11.663462] print_address_description.constprop.0+0x1f/0x1b0 [ 11.663468] ? device_del+0x79/0x5f0 [ 11.663471] ? device_del+0x79/0x5f0 [ 11.663475] print_report.cold+0x3c/0x21c [ 11.663481] ? lock_acquired+0x87/0x1e0 [ 11.663484] ? lock_acquired+0x87/0x1e0 [ 11.663489] ? device_del+0x79/0x5f0 [ 11.663492] kasan_report+0xbf/0xf0 [ 11.663498] ? device_del+0x79/0x5f0 [ 11.663503] device_del+0x79/0x5f0 [ 11.663509] ? device_remove_attrs+0x170/0x170 [ 11.663514] ? lock_is_held_type+0xe8/0x140 [ 11.663523] platform_device_del.part.0+0x19/0xe0 [ 11.663530] platform_device_unregister+0x1c/0x30 [ 11.663535] sysfb_disable+0x2d/0x70 [ 11.663540] remove_conflicting_framebuffers+0x1c/0xf0 [ 11.663546] remove_conflicting_pci_framebuffers+0x130/0x1a0 [ 11.663554] drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0 [ 11.663561] ? mgag200_pci_remove+0x30/0x30 [mgag200] [ 11.663578] mgag200_pci_probe+0x2d/0x140 [mgag200] Reported-by: Zack Rusin <zackr@vmware.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Fixes: ee7a69aa38d8 ("fbdev: Disable sysfb device registration when removing conflicting FBs") Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Helge Deller <deller@gmx.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Changcheng Deng <deng.changcheng@zte.com.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20220617121027.30273-1-tzimmermann@suse.de (cherry picked from commit fb84efa28a48e30b87fa1122e8aab8016c7347cd) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversionMarc Kleine-Budde
In mcp251xfd_register_get_dev_id() the device ID register is read with handcrafted SPI transfers. As all registers, this register is in little endian. Further it is not naturally aligned in struct mcp251xfd_map_buf_nocrc::data. However after the transfer the register content is converted from big endian to CPU endianness not taking care of being unaligned. Fix the conversion by converting from little endian to CPU endianness taking the unaligned source into account. Side note: So far the register content is 0x0 on all mcp251xfd compatible chips, and is only used for an informative printk. Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read ↵Marc Kleine-Budde
dev_id The device ID register is 32 bits wide. The driver uses incorrectly the size of a pointer to a u32 to calculate the length of the SPI transfer. This results in a read of 2 registers on 64 bit platforms. This is no problem on the Linux side, as the RX buffer of the SPI transfer is large enough. In the mpc251xfd chip this results in the read of an undocumented register. So far no problems were observed. Fix the length of the SPI transfer to read the device ID register only. Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()Marc Kleine-Budde
In commit 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") software based TX coalescing was added to the driver. The key idea is to keep the TX complete IRQ disabled for some time after processing it and re-enable later by a hrtimer. When bringing the interface down, this timer has to be stopped. Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to mcp251xfd_stop(). Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de Fixes: 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") Cc: stable@vger.kernel.org # v5.18 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on ↵Thomas Kopp
TBC register The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. New investigations and simulations indicate that the CRC send by the device is calculated on correct data, and the data is incorrectly received by the SPI host controller. Use flipped instead of original data and update workaround description in mcp251xfd_regmap_crc_read(). [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for ↵Thomas Kopp
mcp2517fd The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Measurements on the mcp2517fd show that the workaround is applicable not only of the lowest byte is 0x00 or 0x80, but also if 3 least significant bits are set. Update check on 1st data byte and workaround description accordingly. [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Reported-by: Pavel Modilaynen <pavel.modilaynen@volvocars.com> Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix bittiming limitsJimmy Assarsson
Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regressionJimmy Assarsson
The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_infoJimmy Assarsson
Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04ibmvnic: Properly dispose of all skbs during a failover.Rick Lindsley
During a reset, there may have been transmits in flight that are no longer valid and cannot be fulfilled. Resetting and clearing the queues is insufficient; each skb also needs to be explicitly freed so that upper levels are not left waiting for confirmation of a transmit that will never happen. If this happens frequently enough, the apparent backlog will cause TCP to begin "congestion control" unnecessarily, culminating in permanently decreased throughput. Fixes: d7c0ef36bde03 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change") Tested-by: Nick Child <nnac123@linux.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Rick Lindsley <ricklind@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-04can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bitsMarc Kleine-Budde
In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. Link: https://lore.kernel.org/all/20220612211410.4081390-1-mkl@pengutronix.de Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: m_can: m_can_chip_config(): actually enable internal timestampingMarc Kleine-Budde
In commit df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") the timestamping in the m_can core should be enabled. In peripheral mode, the RX'ed CAN frames, TX compete frames and error events are sorted by the timestamp. The above mentioned commit however forgot to enable the timestamping. Add the missing bits to enable the timestamp counter to the write of the Timestamp Counter Configuration register. Link: https://lore.kernel.org/all/20220612212708.4081756-1-mkl@pengutronix.de Fixes: df06fd678260 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: grcan: grcan_probe(): remove extra of_node_get()Liang He
In grcan_probe(), of_find_node_by_path() has already increased the refcount. There is no need to call of_node_get() again, so remove it. Link: https://lore.kernel.org/all/20220619070257.4067022-1-windhl@126.com Fixes: 1e93ed26acf0 ("can: grcan: grcan_probe(): fix broken system id check for errata workaround needs") Cc: stable@vger.kernel.org # v5.18 Cc: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: gs_usb: gs_usb_open/close(): fix memory leakRhett Aultman
The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fad41b ("can: esd_usb2: fix memory leak"). Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04can: rcar_canfd: Fix data transmission failed on R-Car V3UDuy Nguyen
On R-Car V3U, this driver should use suitable register offset instead of other SoCs' one. Otherwise, data transmission failed on R-Car V3U. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220704074611.957191-1-yoshihiro.shimoda.uh@renesas.com Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-04Revert "can: xilinx_can: Limit CANFD brp to 2"Srinivas Neeli
This reverts commit 05ca14fdb6fe65614e0652d03e44b02748d25af7. On early silicon engineering samples observed bit shrinking issue when we use brp as 1. Hence updated brp_min as 2. As in production silicon this issue is fixed, so reverting the patch. Link: https://lore.kernel.org/all/20220609082433.1191060-2-srinivas.neeli@xilinx.com Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-02misc: rtsx_usb: set return value in rsp_buf alloc err pathShuah Khan
Set return value in rsp_buf alloc error path before going to error handling. drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ucr->rsp_buf) ^~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here return ret; ^~~ drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false if (!ucr->rsp_buf) ^~~~~~~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 Fixes: 3776c7855985 ("misc: rtsx_usb: use separate command and response buffers") Reported-by: kernel test robot <lkp@intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 22:55:05 +0000