summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-06-30serial: 8250: fix return error code in serial8250_request_std_resource()Yi Yang
If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by: Yi Yang <yiyang13@huawei.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30serial: stm32: Clear prev values before setting RTS delaysIlpo Järvinen
The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-30net: sfp: fix memory leak in sfp_probe()Jianglei Nie
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30mlxsw: spectrum_router: Fix rollback in tunnel next hop initPetr Machata
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When that function results in an error, the next hop will not have been removed from the linked list. As the error is propagated upwards and the caller frees the next hop object, the linked list ends up holding an invalid object. A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback block does exist, however does not include the linked list removal. Both IPv6 and IPv4 next hops have a similar issue with next-hop counter rollbacks. As these were introduced in the same patchset as the next hop linked list, include the cleanup in this patch. Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list") Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30net: usb: ax88179_178a: Fix packet receivingJose Alonso
This patch corrects packet receiving in ax88179_rx_fixup. - problem observed: ifconfig shows allways a lot of 'RX Errors' while packets are received normally. This occurs because ax88179_rx_fixup does not recognise properly the usb urb received. The packets are normally processed and at the end, the code exits with 'return 0', generating RX Errors. (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify another packet there) This is a usb urb received by "tcpdump -i usbmon2 -X" on a little-endian CPU: 0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ^ packet 1 start (pkt_len = 0x05ec) ^^^^ IP alignment pseudo header ^ ethernet packet start last byte ethernet packet v padding (8-bytes aligned) vvvv vvvv 0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811 0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 2 0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... 0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0 ... 0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0 ... 0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0 ... 0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800 ... ^ packet 7 0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a 0x2130: f032 e093 7489 0740 3008 ec05 0000 0080 ====1==== ====2==== hdr_off ^ pkt_len = 0x05ec ^^^^ AX_RXHDR_*=0x00830 ^^^^ ^ pkt_len = 0 ^^^^ AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^ 0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080 0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080 0x2160: 3008 5803 0000 0080 3008 c800 0000 0080 ===11==== ===12==== ===13==== ===14==== 0x2170: 0000 0000 0e00 3821 ^^^^ ^^^^ rx_hdr ^^^^ pkt_cnt=14 ^^^^ hdr_off=0x2138 ^^^^ ^^^^ padding The dump shows that pkt_cnt is the number of entrys in the per-packet metadata. It is "2 * packet count". Each packet have two entrys. The first have a valid value (pkt_len and AX_RXHDR_*) and the second have a dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR). Why exists dummy-header for each packet?!? My guess is that this was done probably to align the entry for each packet to 64-bits and maintain compatibility with old firmware. There is also a padding (0x00000000) before the rx_hdr to align the end of rx_hdr to 64-bit. Note that packets have a alignment of 64-bits (8-bytes). This patch assumes that the dummy-header and the last padding are optional. So it preserves semantics and recognises the same valid packets as the current code. This patch was made using only the dumpfile information and tested with only one device: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup") Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Alonso <joalonsof@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-30nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1Lamarque Vieira Souza
ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same across all drives. Quirk them out so they are not marked as "non globally unique" duplicates. Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com> Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com> Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-30nvmet: add a clear_ids attribute for passthru targetsAlan Adamson
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared for the passthru target. By default, loop targets will set clear_ids to true. This resolves an issue where a connect to a passthru target fails when using a trtype of 'loop' because EUI/GUID/UUID is not unique. Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique") Signed-off-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29net: bonding: fix use-after-free after 802.3ad slave unbindYevhen Orlov
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 Fixes: 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29net: phy: ax88772a: fix lost pause advertisement configurationOleksij Rempel
In case of asix_ax88772a_link_change_notify() workaround, we run soft reset which will automatically clear MII_ADVERTISE configuration. The PHYlib framework do not know about changed configuration state of the PHY, so we need use phy_init_hw() to reinit PHY configuration. Fixes: dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29net: phy: Don't trigger state machine while in suspendLukas Wunner
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(), but subsequent interrupts may retrigger it: They may have been left enabled to facilitate wakeup and are not quiesced until the ->suspend_noirq() phase. Unwanted interrupts may hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(), as well as between dpm_resume_noirq() and mdio_bus_phy_resume(). Retriggering the phy_state_machine() through an interrupt is not only undesirable for the reason given in mdio_bus_phy_suspend() (freezing it midway with phydev->lock held), but also because the PHY may be inaccessible after it's suspended: Accesses to USB-attached PHYs are blocked once usb_suspend_both() clears the can_submit flag and PHYs on PCI network cards may become inaccessible upon suspend as well. Amend phy_interrupt() to avoid triggering the state machine if the PHY is suspended. Signal wakeup instead if the attached net_device or its parent has been configured as a wakeup source. (Those conditions are identical to mdio_bus_phy_may_suspend().) Postpone handling of the interrupt until the PHY has resumed. Before stopping the phy_state_machine() in mdio_bus_phy_suspend(), wait for a concurrent phy_interrupt() to run to completion. That is necessary because phy_interrupt() may have checked the PHY's suspend status before the system sleep transition commenced and it may thus retrigger the state machine after it was stopped. Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(), wait for a concurrent phy_interrupt() to complete to ensure that interrupts which it postponed are properly rerun. The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"), but has existed since forever. Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume") Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/ Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v2.6.33+ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29usbnet: fix memory allocation in helpersOliver Neukum
usbnet provides some helper functions that are also used in the context of reset() operations. During a reset the other drivers on a device are unable to operate. As that can be block drivers, a driver for another interface cannot use paging in its memory allocations without risking a deadlock. Use GFP_NOIO in the helpers. Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30Merge tag 'amd-drm-fixes-5.19-2022-06-29' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-06-29: amdgpu: - GPU recovery fix - Fix integer type usage in fourcc header for AMD modifiers - KFD TLB flush fix for gfx9 APUs - Display fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220629192220.5870-1-alexander.deucher@amd.com
2022-06-30Merge tag 'drm-intel-fixes-2022-06-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.19-rc5: - Fix ioctl argument error return - Fix d3cold disable to allow PCI upstream bridge D3 transition - Fix setting cache_dirty for dma-buf objects on discrete Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/871qv7rblv.fsf@intel.com
2022-06-29dm raid: fix KASAN warning in raid5_add_disksMikulas Patocka
There's a KASAN warning in raid5_add_disk when running the LVM testsuite. The warning happens in the test lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning by verifying that rdev->saved_raid_disk is within limits. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-29dm raid: fix KASAN warning in raid5_remove_diskMikulas Patocka
There's a KASAN warning in raid5_remove_disk when running the LVM testsuite. We fix this warning by verifying that the "number" variable is within limits. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-30ata: pata_cs5535: Fix W=1 warningsJohn Garry
x86_64 allmodconfig build with W=1 gives these warnings: drivers/ata/pata_cs5535.c: In function ‘cs5535_set_piomode’: drivers/ata/pata_cs5535.c:93:11: error: variable ‘dummy’ set but not used [-Werror=unused-but-set-variable] u32 reg, dummy; ^~~~~ drivers/ata/pata_cs5535.c: In function ‘cs5535_set_dmamode’: drivers/ata/pata_cs5535.c:132:11: error: variable ‘dummy’ set but not used [-Werror=unused-but-set-variable] u32 reg, dummy; ^~~~~ cc1: all warnings being treated as errors Mark variables 'dummy' as "maybe unused" as they are only ever written in rdmsr() calls. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-06-29hwmon: (pmbus/ucd9200) fix typos in commentsJiang Jian
Drop the redundant word 'the' in the comments following /* * Set PHASE registers on all pages to 0xff to ensure that phase * specific commands will apply to all phases of a given page (rail). * This only affects the READ_IOUT and READ_TEMPERATURE2 registers. * READ_IOUT will return the sum of currents of all phases of a rail, * and READ_TEMPERATURE2 will return the maximum temperature detected * for the [the - DROP] phases of the rail. */ Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622063231.20612-1-jiangjian@cdjrlc.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-06-29hwmon: (occ) Prevent power cap command overwriting poll responseEddie James
Currently, the response to the power cap command overwrites the first eight bytes of the poll response, since the commands use the same buffer. This means that user's get the wrong data between the time of sending the power cap and the next poll response update. Fix this by specifying a different buffer for the power cap command response. Fixes: 5b5513b88002 ("hwmon: Add On-Chip Controller (OCC) hwmon driver") Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220628203029.51747-1-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-06-30PM / devfreq: passive: revert an editing accident in SPDX-License lineLukas Bulwahn
Commit 26984d9d581e ("PM / devfreq: passive: Keep cpufreq_policy for possible cpus") reworked governor_passive.c, and accidently added a tab in the first line, i.e., the SPDX-License-Identifier line. The checkpatch script warns with the SPDX_LICENSE_TAG warning, and hence pointed this issue out while investigating checkpatch warnings. Revert this editing accident. No functional change. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: Fix kernel warning with cpufreq passive register failChristian Marangi
Remove cpufreq_passive_unregister_notifier from cpufreq_passive_register_notifier in case of error as devfreq core already call unregister on GOV_START fail. This fix the kernel always printing a WARN on governor PROBE_DEFER as cpufreq_passive_unregister_notifier is called two times and return error on the second call as the cpufreq is already unregistered. Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: Rework freq_table to be local to devfreq structChristian Marangi
On a devfreq PROBE_DEFER, the freq_table in the driver profile struct, is never reset and may be leaved in an undefined state. This comes from the fact that we store the freq_table in the driver profile struct that is commonly defined as static and not reset on PROBE_DEFER. We currently skip the reinit of the freq_table if we found it's already defined since a driver may declare his own freq_table. This logic is flawed in the case devfreq core generate a freq_table, set it in the profile struct and then PROBE_DEFER, freeing the freq_table. In this case devfreq will found a NOT NULL freq_table that has been freed, skip the freq_table generation and probe the driver based on the wrong table. To fix this and correctly handle PROBE_DEFER, use a local freq_table and max_state in the devfreq struct and never modify the freq_table present in the profile struct if it does provide it. Fixes: 0ec09ac2cebe ("PM / devfreq: Set the freq_table of devfreq device") Cc: stable@vger.kernel.org Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_eventsMiaoqian Lin
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. This function only calls of_node_put() in normal path, missing it in error paths. Add missing of_node_put() to avoid refcount leak. Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: passive: Use HZ_PER_KHZ macro in units.hYicong Yang
HZ macros has been centralized in units.h since [1]. Use it to avoid duplicated definition. [1] commit e2c77032fcbe ("units: add the HZ macros") Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFERChristian 'Ansuel' Marangi
With the passive governor, the cpu based scaling can PROBE_DEFER due to the fact that CPU policy are not ready. The cpufreq passive unregister notifier is called both from the GOV_START errors and for the GOV_STOP and assume the notifier is successfully registred every time. With GOV_START failing it's wrong to loop over each possible CPU since the register path has failed for some CPU policy not ready. Change the logic and unregister the notifer based on the current allocated parent_cpu_data list to correctly handle errors and the governor unregister path. Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: Mute warning on governor PROBE_DEFERChristian 'Ansuel' Marangi
Don't print warning when a governor PROBE_DEFER as it's not a real GOV_START fail. Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-30PM / devfreq: Fix kernel panic with cpu based scaling to passive govChristian 'Ansuel' Marangi
The cpufreq passive register notifier can PROBE_DEFER and the devfreq struct is freed and then reallocaed on probe retry. The current logic assume that the code can't PROBE_DEFER so the devfreq struct in the this variable in devfreq_passive_data is assumed to be (if already set) always correct. This cause kernel panic as the code try to access the wrong address. To correctly handle this, update the this variable in devfreq_passive_data to the devfreq reallocated struct. Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2022-06-29i2c: piix4: Fix a memory leak in the EFCH MMIO supportJean Delvare
The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Yi Zhang <yi.zhang@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Reviewed-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Terry Bowman <Terry.Bowman@amd.com> Fixes: 7c148722d074 ("i2c: piix4: Add EFCH MMIO support to region request and release") Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-06-29usb: dwc3-am62: remove unnecesary clk_put()Yang Yingliang
The clk get by devm_clk_get() will be released in devres_release_all(), so there is no need explicitly call clk_put(), or it will cause UAF. Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220629094635.3116961-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-29usb: dwc3: gadget: Fix event pending checkThinh Nguyen
The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion. However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events. To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler. Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-29Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"Alex Deucher
This reverts commit 92020e81ddbeac351ea4a19bcf01743f32b9c800. This causes stuttering and timeouts with DMCUB for some users so revert it until we understand why and safely enable it to save power. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1887 Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: stable@vger.kernel.org
2022-06-29drm/amdgpu: To flush tlb for MMHUB of RAVEN seriesRuili Ji
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305) amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC) amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051 amdgpu: Faulty UTCL2 client ID: MP1 (0x0) amdgpu: MORE_FAULTS: 0x1 amdgpu: WALKER_ERROR: 0x0 amdgpu: PERMISSION_FAULTS: 0x5 amdgpu: MAPPING_ERROR: 0x0 amdgpu: RW: 0x1 When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0. There is page fault from MMHUB0. v2:fix indentation v3:change subject and fix indentation Signed-off-by: Ruili Ji <ruiliji2@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-06-29drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()Alex Deucher
Use the correct adev variable for the drm_fb_helper in amdgpu_device_gpu_recover(). Noticed by inspection. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-06-29spi: aspeed: Fix division by zeroCédric Le Goater
When using the normal read operation for data transfers, the dummy bus width is zero. In that case, they are no dummy bytes to transfer and setting the dummy field in the controller register becomes useless. Issue was found on a custom "Bifrost" board based on the AST2500 SoC and using a MX25L51245GMI-08G SPI Flash. Reported-by: Ian Woloschin <ian.woloschin@akamai.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Ian Woloschin <iwolosch@akamai.com> Fixes: 9da06d7bdec7dad80 ("spi: aspeed: Add support for direct mapping") Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220622161617.3719096-3-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptorCédric Le Goater
The default value of the control register is set using the direct mapping information passed to the ->dirmap_create() handler. Dump the mapping range and the SPI memory operation characteristics to analyze how the register value has been computed. spi-aspeed-smc 1e630000.spi: CE0 read dirmap [ 0x00000000 - 0x04000000 ] OP 0x6c mode:1.1.1.4 naddr:0x4 ndummies:0x1 ... spi-aspeed-smc 1e630000.spi: CE0 write dirmap [ 0x00000000 - 0x04000000 ] OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220622161617.3719096-2-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-29Merge tag 'platform-drivers-x86-v5.19-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes - panasonic-laptop: missing hotkey presses regression fix - some hardware-id additions - some other small fixes * tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: hp-wmi: Ignore Sanitization Mode event platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms platform/x86: thinkpad-acpi: profile capabilities as integer platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses platform/x86: panasonic-laptop: don't report duplicate brightness key-presses platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug" platform/x86: panasonic-laptop: sort includes alphabetically platform/x86: panasonic-laptop: de-obfuscate button codes ACPI: video: Change how we determine if brightness key-presses are handled platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[] platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices() platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
2022-06-29nvme: fix regression when disconnect a recovering ctrlRuozhu Li
We encountered a problem that the disconnect command hangs. After analyzing the log and stack, we found that the triggering process is as follows: CPU0 CPU1 nvme_rdma_error_recovery_work nvme_rdma_teardown_io_queues nvme_do_delete_ctrl nvme_stop_queues nvme_remove_namespaces --clear ctrl->namespaces nvme_start_queues --no ns in ctrl->namespaces nvme_ns_remove return(because ctrl is deleting) blk_freeze_queue blk_mq_freeze_queue_wait --wait for ns to unquiesce to clean infligt IO, hang forever This problem was not found in older kernels because we will flush err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not seem to be modified for functional reasons, the patch can be revert to solve the problem. Revert commit 794a4cb3d2f7 ("nvme: remove the .stop_ctrl callout") Signed-off-by: Ruozhu Li <liruozhu@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)Pablo Greco
ADATA XPG SPECTRIX S40G drives report bogus eui64 values that appear to be the same across drives in one system. Quirk them out so they are not marked as "non globally unique" duplicates. Before: [ 2.258919] nvme nvme1: pci function 0000:06:00.0 [ 2.264898] nvme nvme2: pci function 0000:05:00.0 [ 2.323235] nvme nvme1: failed to set APST feature (2) [ 2.326153] nvme nvme2: failed to set APST feature (2) [ 2.333935] nvme nvme1: allocated 64 MiB host memory buffer. [ 2.336492] nvme nvme2: allocated 64 MiB host memory buffer. [ 2.339611] nvme nvme1: 7/0/0 default/read/poll queues [ 2.341805] nvme nvme2: 7/0/0 default/read/poll queues [ 2.346114] nvme1n1: p1 [ 2.347197] nvme nvme2: globally duplicate IDs for nsid 1 After: [ 2.427715] nvme nvme1: pci function 0000:06:00.0 [ 2.427771] nvme nvme2: pci function 0000:05:00.0 [ 2.488154] nvme nvme2: failed to set APST feature (2) [ 2.489895] nvme nvme1: failed to set APST feature (2) [ 2.498773] nvme nvme2: allocated 64 MiB host memory buffer. [ 2.500587] nvme nvme1: allocated 64 MiB host memory buffer. [ 2.504113] nvme nvme2: 7/0/0 default/read/poll queues [ 2.507026] nvme nvme1: 7/0/0 default/read/poll queues [ 2.509467] nvme nvme2: Ignoring bogus Namespace Identifiers [ 2.512804] nvme nvme1: Ignoring bogus Namespace Identifiers [ 2.513698] nvme1n1: p1 Signed-off-by: Pablo Greco <pgreco@centosproject.org> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29nvme-tcp: always fail a request when sending it failedSagi Grimberg
queue stoppage and inflight requests cancellation is fully fenced from io_work and thus failing a request from this context. Hence we don't need to try to guess from the socket retcode if this failure is because the queue is about to be torn down or not. We are perfectly safe to just fail it, the request will not be cancelled later on. This solves possible very long shutdown delays when the users issues a 'nvme disconnect-all' Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29nvmet-tcp: fix regression in data_digest calculationSagi Grimberg
Data digest calculation iterates over command mapped iovec. However since commit bac04454ef9f we unmap the iovec before we handle the data digest, and since commit 69b85e1f1d1d we clear nr_mapped when we unmap the iov. Instead of open-coding the command iov traversal, simply call crypto_ahash_digest with the command sg that is already allocated (we already do that for the send path). Rename nvmet_tcp_send_ddgst to nvmet_tcp_calc_ddgst and call it from send and recv paths. Fixes: 69b85e1f1d1d ("nvmet-tcp: add an helper to free the cmd buffers") Fixes: bac04454ef9f ("nvmet-tcp: fix kmap leak when data digest in use") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-06-29NFC: nxp-nci: don't print header length mismatch on i2c errorMichael Walle
Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29NFC: nxp-nci: Don't issue a zero length i2c_master_read()Michael Walle
There are packets which doesn't have a payload. In that case, the second i2c_master_read() will have a zero length. But because the NFC controller doesn't have any data left, it will NACK the I2C read and -ENXIO will be returned. In case there is no payload, just skip the second i2c master read. Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-29wifi: mac80211: add gfp_t parameter to ieeee80211_obss_color_collision_notifyLorenzo Bianconi
Introduce the capability to specify gfp_t parameter to ieeee80211_obss_color_collision_notify routine since it runs in interrupt context in ieee80211_rx_check_bss_color_collision(). Fixes: 6d945a33f2b0a ("mac80211: introduce BSS color collision detection") Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/02c990fb3fbd929c8548a656477d20d6c0427a13.1655419135.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211_hwsim: set virtio device ready in probe()Johannes Berg
Just like a similar commit to arch/um/drivers/virt-pci.c, call virtio_device_ready() to make this driver work after commit b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the virtqueues in the probe function. (The virtio core sets the device ready when probe returns.) Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ") Fixes: 5d44fe7c9808 ("mac80211_hwsim: add frame transmission support over virtio") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220613210401.327958-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29fbdev: Disable sysfb device registration when removing conflicting FBsJavier Martinez Canillas
The platform devices registered by sysfb match with firmware-based DRM or fbdev drivers, that are used to have early graphics using a framebuffer provided by the system firmware. DRM or fbdev drivers later are probed and remove conflicting framebuffers, leading to these platform devices for generic drivers to be unregistered. But the current solution has a race, since the sysfb_init() function could be called after a DRM or fbdev driver is probed and request to unregister the devices for drivers with conflicting framebuffes. To prevent this, disable any future sysfb platform device registration by calling sysfb_disable(), if a driver requests to remove the conflicting framebuffers. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-4-javierm@redhat.com
2022-06-29firmware: sysfb: Add sysfb_disable() helper functionJavier Martinez Canillas
This can be used by subsystems to unregister a platform device registered by sysfb and also to disable future platform device registration in sysfb. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com
2022-06-29firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointerJavier Martinez Canillas
This function just returned 0 on success or an errno code on error, but it could be useful for sysfb_init() callers to have a pointer to the device. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com
2022-06-28cxl/mbox: Fix missing variable payload checks in cmd size validationVishal Verma
The conversion of command sizes to unsigned missed a couple of checks against variable size payloads during command validation, which made all variable payload commands unconditionally fail. Add the checks back using the new CXL_VARIABLE_PAYLOAD scheme. Fixes: 26f89535a5bb ("cxl/mbox: Use type __u32 for mailbox payload sizes") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Reported-by: Abhi Cs <abhi.cs@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220628220109.633564-1-vishal.l.verma@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-06-28nfc: nfcmrvl: Fix irq_of_parse_and_map() return valueKrzysztof Kozlowski
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO. Reported-by: Lv Ruyi <lv.ruyi@zte.com.cn> Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-29Merge tag 'drm-msm-fixes-2022-06-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v5.19-rc5 - Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so that userspace sees the value *after* it is incremented if waiting for vblank events - Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash in probe/bind error paths - Fix to resolve the smatch error of de-referencing before NULL check in dpu_encoder_phys_wb.c - Fix error return to userspace if fence-id allocation fails in submit ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvswNKdd02EYKYv5Zjv7f+mcqeWC7hHQ1SBjqYzN_ZHnA@mail.gmail.com
2022-06-28platform/x86: hp-wmi: Ignore Sanitization Mode eventKai-Heng Feng
After system resume the hp-wmi driver may complain: [ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0 According to HP it means 'Sanitization Mode' and it's harmless to just ignore the event. Cc: Jorge Lopez <jorge.lopez2@hp.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 04:33:10 +0000