summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-06-28platform/x86: thinkpad_acpi: do not use PSC mode on Intel platformsMark Pearson
PSC platform profile mode is only supported on Linux for AMD platforms. Some older Intel platforms (e.g T490) are advertising it's capability as Windows uses it - but on Linux we should only be using MMC profile for Intel systems. Add a check to prevent it being enabled incorrectly. Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-06-28platform/x86: thinkpad-acpi: profile capabilities as integerMark Pearson
Currently the active mode (PSC/MMC) is stored in an enum and queried throughout the driver. Other driver changes will enumerate additional submodes that are relevant to be tracked, so instead track PSC/MMC in a single integer variable. Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-06-28platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute ↵Hans de Goede
keypresses On some Panasonic models the volume up/down/mute keypresses get reported both through the Panasonic ACPI HKEY interface as well as through the atkbd device. Filter out the atkbd scan-codes for these to avoid reporting presses twice. Note normally we would leave the filtering of these to userspace by mapping the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb. However in this case that would cause regressions since we were filtering the Panasonic ACPI HKEY events before, so filter these in the kernel. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
2022-06-28platform/x86: panasonic-laptop: don't report duplicate brightness key-pressesHans de Goede
The brightness key-presses might also get reported by the ACPI video bus, check for this and in this case don't report the presses to avoid reporting 2 presses for a single key-press. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
2022-06-28platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"Hans de Goede
In hindsight blindly throwing away most of the key-press events is not a good idea. So revert commit ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug"). Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
2022-06-28platform/x86: panasonic-laptop: sort includes alphabeticallyHans de Goede
Sort includes alphabetically, small cleanup patch in preparation of further changes. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
2022-06-28platform/x86: panasonic-laptop: de-obfuscate button codesStefan Seyfried
In the definition of panasonic_keymap[] the key codes are given in decimal, later checks are done with hexadecimal values, which does not help in understanding the code. Additionally use two helper variables to shorten the code and make the logic more obvious. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
2022-06-28ACPI: video: Change how we determine if brightness key-presses are handledHans de Goede
Some systems have an ACPI video bus but not ACPI video devices with backlight capability. On these devices brightness key-presses are (logically) not reported through the ACPI video bus. Change how acpi_video_handles_brightness_key_presses() determines if brightness key-presses are handled by the ACPI video driver to avoid vendor specific drivers/platform/x86 drivers filtering out their brightness key-presses even though they are the only ones reporting these presses. Fixes: ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug") Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com> Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
2022-06-28Merge tag 'cpufreq-arm-fixes-5.19-rc5' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM fixes for 5.19-rc5 from Viresh Kumar: - Fix missing of_node_put for qoriq and pmac32 driver (Liang He). - Fix issues around throttle interrupt for qcom driver (Stephen Boyd). - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno). * tag 'cpufreq-arm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
2022-06-28pinctrl: stm32: fix optional IRQ support to gpiosFabien Dessenne
To act as an interrupt controller, a gpio bank relies on the "interrupt-parent" of the pin controller. When this optional "interrupt-parent" misses, do not create any IRQ domain. This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when the interrupt-parent = <exti> property is not declared in the Device Tree. Fixes: 0eb9f683336d ("pinctrl: Add IRQ support to STM32 gpios") Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20220627142350.742973-1-fabien.dessenne@foss.st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-28net: bonding: fix possible NULL deref in rlb codeEric Dumazet
syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-28pinctrl: imx: Add the zero base flag for imx93Jacky Bai
On i.MX93, the pin mux reg offset is from 0x0, so need to add the 'ZERO_OFFSET_VALID' flag to make sure the pin at mux offset 0 can be found. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20220613031854.1571357-1-ping.bai@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-28ARM: at91: fix soc detection for SAM9X60 SiPsMihai Sain
Fix SoC detection for SAM9X60 SiPs: SAM9X60D5M SAM9X60D1G SAM9X60D6K Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220616081344.1978664-1-claudiu.beznea@microchip.com
2022-06-28irqchip: or1k-pic: Undefine mask_ack for level triggered hardwareStafford Horne
The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware. This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR. Just remove the mask_ack operation. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-06-28cpufreq: Add MT8186 to cpufreq-dt-platdev blocklistAngeloGioacchino Del Regno
This SoC shall use the mediatek-cpufreq driver, or the system will crash upon any clock scaling request: add it to the cpufreq-dt-platdev blocklist. Fixes: 39b360102f3a ("cpufreq: mediatek: Add support for MT8186") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28cpufreq: pmac32-cpufreq: Fix refcount leak bugLiang He
In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name(). Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28cpufreq: qcom-hw: Don't do lmh things without a throttle interruptStephen Boyd
Offlining cpu6 and cpu7 and then onlining cpu6 hangs on sc7180-trogdor-lazor because the throttle interrupt doesn't exist. Similarly, things go sideways when suspend/resume runs. That's because the qcom_cpufreq_hw_cpu_online() and qcom_cpufreq_hw_lmh_exit() functions are calling genirq APIs with an interrupt value of '-6', i.e. -ENXIO, and that isn't good. Check the value of the throttle interrupt like we already do in other functions in this file and bail out early from lmh code to fix the hang. Reported-by: Rob Clark <robdclark@chromium.org> Cc: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: a1eb080a0447 ("cpufreq: qcom-hw: provide online/offline operations") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-28drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.cLiang He
In qoriq_cpufreq_probe(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Fixes: 157f527639da ("cpufreq: qoriq: convert to a platform driver") [ Viresh: Fixed Author's name in commit log ] Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-06-27net: usb: asix: do not force pause frames supportOleksij Rempel
We should respect link partner capabilities and not force flow control support on every link. Even more, in current state the MAC driver do not advertises pause support so we should not keep flow control enabled at all. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: asix: fix "can't send until first packet is send" issueOleksij Rempel
If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27octeon_ep: use bitwise ANDShreenidhi Shedi
This should be bitwise operator not logical. Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com> Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27epic100: fix use after free on rmmodTong Zhang
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one() we already freed the dma buffer. To fix this issue, reorder function calls like in the .probe function. BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100] Call Trace: epic_rx+0xa6/0x7e0 [epic100] epic_close+0xec/0x2f0 [epic100] unregister_netdev+0x18/0x20 epic_remove_one+0xaa/0xf0 [epic100] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27net: tun: stop NAPI when detaching queuesJakub Kicinski
While looking at a syzbot report I noticed the NAPI only gets disabled before it's deleted. I think that user can detach the queue before destroying the device and the NAPI will never be stopped. Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver") Acked-by: Petar Penkov <ppenkov@aviatrix.com> Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-27scsi: hisi_sas: Limit max hw sectors for v3 HWJohn Garry
If the controller is behind an IOMMU then the IOMMU IOVA caching range can affect performance, as discussed in [0]. Limit the max HW sectors to not exceed this limit. We need to hardcode the value until a proper DMA mapping API is available. [0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/ Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27dm raid: fix accesses beyond end of raid member arrayHeinz Mauelshagen
On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled). Cc: stable@vger.kernel.org Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-06-27Input: usbtouchscreen - add driver_info sanity checkJohan Hovold
Add a sanity check on the device id-table driver_info field to make sure we never access a type structure (and function pointers) outside of the device info array (e.g. if someone fails to ifdef a device-id entry). Note that this also suppresses a compiler warning with -Warray-bounds (gcc-11.3.0) when compile-testing the driver without enabling any of the device type Kconfig options: drivers/input/touchscreen/usbtouchscreen.c: In function 'usbtouch_probe': drivers/input/touchscreen/usbtouchscreen.c:1668:16:warning: array subscript <unknown> is outside array bounds of 'struct usbtouch_device_info[0]' [-Warray-bounds] 1668 | type = &usbtouch_dev_info[id->driver_info]; Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220623062446.16944-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-06-27drm/msm/gem: Fix error return on fence id alloc failRob Clark
This was a typo, we didn't actually want to return zero. Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/491145/ Link: https://lore.kernel.org/r/20220624184528.4036837-1-robdclark@gmail.com
2022-06-27Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably we are disabling IRQ hardening (again!)" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: make vring_create_virtqueue_split prettier vhost-vdpa: call vhost_vdpa_cleanup during the release virtio_mmio: Restore guest page size on resume virtio_mmio: Add missing PM calls to freeze/restore caif_virtio: fix race between virtio_device_ready() and ndo_open() virtio-net: fix race between ndo_open() and virtio_device_ready() virtio: disable notification hardening by default virtio: Remove unnecessary variable assignments virtio_ring : keep used_wrap_counter in vq->last_used_idx vduse: Tie vduse mgmtdev and its device vdpa/mlx5: Initialize CVQ vringh only once vdpa/mlx5: Update Control VQ callback information
2022-06-27firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx APIBo Liu
Replace the deprecated ida_simple_{get,remove} with ida_{alloc,free}. Link: https://lore.kernel.org/r/20220616055052.4559-1-liubo03@inspur.com Signed-off-by: Bo Liu <liubo03@inspur.com> [sudeep.holla: Replace ida_alloc_min with ida_alloc as suggested by Cristian] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27drm/i915: tweak the ordering in cpu_write_needs_clflushMatthew Auld
For imported dma-buf objects we leave the object as cache_coherent = 0 across all platforms, which is reasonable given that have no clue what the memory underneath is, and its not like the driver can ever manually clflush the pages anyway (like with i915_gem_clflush_object) for such objects. However on discrete we choose to treat cache_dirty = true as a programmer error, leading to a warning. The simplest fix looks to be to just change the ordering in cpu_write_needs_clflush to prevent ever setting cache_dirty for dma-buf objects on discrete. Fixes: d028a7690d87 ("drm/i915/dmabuf: Fix prime_mmap to work when using LMEM") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5266 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622155919.355081-1-matthew.auld@intel.com (cherry picked from commit 563aaf4a928def2d36d1b3de0a4b515e2477b4da) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27drm/i915/dgfx: Disable d3cold at gfx root portAnshuman Gupta
Currently i915 disables d3cold for i915 pci dev. This blocks D3 for i915 gfx pci upstream bridge (VSP). Let's disable d3cold at gfx root port to make sure that i915 gfx VSP can transition to D3 to save some power. We don't need to disable/enable d3cold in rpm, s2idle suspend/resume handlers. Disabling/Enabling d3cold at gfx root port in probe/remove phase is sufficient. Fixes: 1a085e23411d ("drm/i915: Disable D3Cold in s2idle and runtime pm") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Badal Nilawar <badal.nilawar@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220616122249.5007-1-anshuman.gupta@intel.com (cherry picked from commit 138c2fca6f408f397ea8fbbbf33203f244d96e01) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27drm/i915/gem: add missing elsekatrinzhou
Add missing else in set_proto_ctx_param() to fix coverity issue. Addresses-Coverity: ("Unused value") Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)") Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: katrinzhou <katrinzhou@tencent.com> [tursulin: fixup alignment] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621124926.615884-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 7482a65664c16cc88eb84d2b545a1fed887378a1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-06-27eeprom: at25: Rework buggy read splittingGeert Uytterhoeven
The recent change to split reads into chunks has several problems: 1. If an SPI controller has no transfer size limit, max_chunk is SIZE_MAX, and num_msgs becomes zero, causing no data to be read into the buffer, and exposing the original contents of the buffer to userspace, 2. If the requested read size is not a multiple of the maximum transfer size, the last transfer reads too much data, overflowing the buffer, 3. The loop logic differs from the write case. Fix the above by: 1. Keeping track of the number of bytes that are still to be transferred, instead of precalculating the number of messages and keeping track of the number of bytes tranfered, 2. Calculating the transfer size of each individual message, taking into account the number of bytes left, 3. Switching from a "while"-loop to a "do-while"-loop, and renaming "msg_count" to "segment". While at it, drop the superfluous cast from "unsigned int" to "unsigned int", also from at25_ee_write(), where it was probably copied from. Fixes: 0a35780c755ccec0 ("eeprom: at25: Split reads into chunks and cap write size") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ↵Hans de Goede
ideapad_dytc_v4_allow_table[] The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile control. This has been tested successfully with the ideapad-laptop DYTC version 5 code; Add the Ideapad 5 15ITL05 to the ideapad_dytc_v4_allow_table[]. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
2022-06-27platform/x86: ideapad-laptop: Add allow_v4_dytc module parameterHans de Goede
Add an allow_v4_dytc module parameter to allow users to easily test if DYTC version 4 platform-profiles work on their laptop. Fixes: 599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5") Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com
2022-06-27drm/vc4: perfmon: Fix variable dereferenced before checkMaxime Ripard
Commit 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") introduced a check in vc4_perfmon_get() that dereferences a pointer before we checked whether that pointer is valid or not. Let's rework that function a bit to do things in the proper order. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 30f8c74ca9b7 ("drm/vc4: Warn if some v3d code is run on BCM2711") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622080243.22119-1-maxime@cerno.tech
2022-06-27serial: 8250: Fix __stop_tx() & DMA Tx restart racesIlpo Järvinen
Commit e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") changed __dma_tx_complete() to enable THRI that is cleared in __stop_tx() once THRE is asserted as UART runs out bits to transmit. It is possible, however, that more data arrives in between in which case serial8250_tx_dma() resumes Tx. THRI is not supposed to be on during DMA Tx because DMA is based on completion handler, therefore THRI must be cleared unconditionally in serial8250_tx_dma(). When Tx is about to start, another race window exists with serial8250_handle_irq() leading to a call into __stop_tx() while the Tx has already been resumed: __tx_complete(): -> spin_lock(port->lock) -> dma->tx_running = 0 -> serial8250_set_THRI() -> spin_unlock(port->lock) uart_start(): serial8250_handle_irq(): -> spin_lock(port->lock) -> serial8250_tx_dma(): -> dma->tx_running = 1 -> spin_unlock(port->lock) -> spin_lock(port->lock) -> __stop_tx() Close this race by checking !dma->tx_running before calling into __stop_tx(). Fixes: e8ffbb71f783 ("serial: 8250: use THRE & __stop_tx also with DMA") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220615090651.15340-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen
The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable <stable@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: samsung_tty: set dma burst_size to 1Chanho Park
The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: dw: enable using pdata with ACPIMarcin Wojtas
Commit ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") caused NULL-pointer dereference when booting with ACPI by unconditional usage of the recently added pdata. In order to fix that and prevent similar issues in future, hook the default version of this structure in dw8250_acpi_match table. While at it, sort all entries alphabetically. Fixes: ffd381445eac ("serial: 8250: dw: Move the USR register to pdata") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20220620121046.1307412-1-mw@semihalf.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27virtio_ring: make vring_create_virtqueue_split prettierDeming Wang
Add some spaces to vring_alloc_queue(make it look prettier). Signed-off-by: Deming Wang <wangdeming@inspur.com> Message-Id: <20220622192306.4371-1-wangdeming@inspur.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-27vhost-vdpa: call vhost_vdpa_cleanup during the releaseStefano Garzarella
Before commit 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") we call vhost_vdpa_iotlb_free() during the release to clean all regions mapped in the iotlb. That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup() to do some cleanup, including deleting all mappings, but we forgot to call it in vhost_vdpa_release(). This causes that if an application does not remove all mappings explicitly (or it crashes), the mappings remain in the iotlb and subsequent applications may fail if they map the same addresses. Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not freeing `v->vdev.vqs` during the release from the same commit. Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its call from vhost_vdpa_release(). Fixes: 3d5698793897 ("vhost-vdpa: introduce asid based IOTLB") Cc: gautam.dawar@xilinx.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220622151407.51232-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-06-27virtio_mmio: Restore guest page size on resumeStephan Gerhold
Virtio devices might lose their state when the VMM is restarted after a suspend to disk (hibernation) cycle. This means that the guest page size register must be restored for the virtio_mmio legacy interface, since otherwise the virtio queues are not functional. This is particularly problematic for QEMU that currently still defaults to using the legacy interface for virtio_mmio. Write the guest page size register again in virtio_mmio_restore() to make legacy virtio_mmio devices work correctly after hibernation. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-27virtio_mmio: Add missing PM calls to freeze/restoreStephan Gerhold
Most virtio drivers provide freeze/restore callbacks to finish up device usage before suspend and to reinitialize the virtio device after resume. However, these callbacks are currently only called when using virtio_pci. virtio_mmio does not have any PM ops defined. This causes problems for example after suspend to disk (hibernation), since the virtio devices might lose their state after the VMM is restarted. Calling virtio_device_freeze()/restore() ensures that the virtio devices are re-initialized correctly. Fix this by implementing the dev_pm_ops for virtio_mmio, similar to virtio_pci_common. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-27caif_virtio: fix race between virtio_device_ready() and ndo_open()Jason Wang
We currently depend on probe() calling virtio_device_ready() - which happens after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device (e.g. TX) before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 0d2e1a2926b18 ("caif_virtio: Introduce caif over virtio") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220620051115.3142-3-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-27virtio-net: fix race between ndo_open() and virtio_device_ready()Jason Wang
We currently call virtio_device_ready() after netdev registration. Since ndo_open() can be called immediately after register_netdev, this means there exists a race between ndo_open() and virtio_device_ready(): the driver may start to use the device before DRIVER_OK which violates the spec. Fix this by switching to use register_netdevice() and protect the virtio_device_ready() with rtnl_lock() to make sure ndo_open() can only be called after virtio_device_ready(). Fixes: 4baf1e33d0842 ("virtio_net: enable VQs early") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20220617072949.30734-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-27firmware: arm_scmi: Fix response size warning for OPTEE transportVincent Guittot
Some protocols check the response size with the expected value but optee shared memory doesn't return such size whereas it is available in the optee output buffer. As an example, the base protocol compares the response size with the expected result when requesting the list of protocol which triggers a warning with optee shared memory: arm-scmi firmware:scmi0: Malformed reply - real_sz:116 calc_sz:4 (loop_num_ret:4) Save the output buffer length and use it when fetching the answer. Link: https://lore.kernel.org/r/20220624074549.3298-1-vincent.guittot@linaro.org Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-27pinctrl: sunxi: sunxi_pconf_set: use correct offsetAndrei Lalaev
Some Allwinner SoCs have 2 pinctrls (PIO and R_PIO). Previous implementation used absolute pin numbering and it was incorrect for R_PIO pinctrl. It's necessary to take into account the base pin number. Fixes: 90be64e27621 ("pinctrl: sunxi: implement pin_config_set") Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220525190423.410609-1-andrey.lalaev@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-06-27intel_idle: Disable IBRS during long idlePeter Zijlstra
Having IBRS enabled while the SMT sibling is idle unnecessarily slows down the running sibling. OTOH, disabling IBRS around idle takes two MSR writes, which will increase the idle latency. Therefore, only disable IBRS around deeper idle states. Shallow idle states are bounded by the tick in duration, since NOHZ is not allowed for them by virtue of their short target residency. Only do this for mwait-driven idle, since that keeps interrupts disabled across idle, which makes disabling IBRS vs IRQ-entry a non-issue. Note: C6 is a random threshold, most importantly C1 probably shouldn't disable IBRS, benchmarking needed. Suggested-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27x86/bugs: Report AMD retbleed vulnerabilityAlexandre Chartre
Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de>
generated by cgit (git 2.34.1) at 2025-09-12 06:23:39 +0000