summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-27thermal: qcom: tsens: Fix return value check in init_common()Wei Yongjun
In case of error, the function of_iomap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. And the function devm_regmap_init_mmio() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: optimize sensor auto accessing periodRocky Hao
In less than 10 ms, the temperature of soc will arise 10 degree. 250 ms is too big for soc tempeture control. Setting 2.5 ms will speed up temperature accessing speed but introduce no more cpu's computing overhead. We set AUTO_PERIOD_TIME and TSADCV3_AUTO_PERIOD_HT_TIME the same value, because normal temperature update speed is also our consern in IPA. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: enhance the tsadc's bandgap feature for rk3399Rocky Hao
Due to the voltage ripple, the sensing data of the tsadc is not accurate. And in this patch, the bandgap feature is enhanced to remove the voltage ripple, and then the tsadc can sense the temperature more precisely. Obsolete codes are removed as well. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8916: mark PM functions __maybe_unusedArnd Bergmann
The newly added tsens-8916 driver produces warnings when CONFIG_PM is disabled: drivers/thermal/qcom/tsens.c:53:12: error: 'tsens_resume' defined but not used [-Werror=unused-function] static int tsens_resume(struct device *dev) ^~~~~~~~~~~~ drivers/thermal/qcom/tsens.c:43:12: error: 'tsens_suspend' defined but not used [-Werror=unused-function] static int tsens_suspend(struct device *dev) ^~~~~~~~~~~~~ This marks both functions __maybe_unused to let the compiler know that they might be used in other configurations, without adding ugly #ifdef logic. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qoriq: Add thermal management supportJia Hongtao
This driver add thermal management support by enabling TMU (Thermal Monitoring Unit) on QorIQ platform. It's based on thermal of framework: - Trip points defined in device tree. - Cpufreq as cooling device registered in qoriq cpufreq driver. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rcar-thermal: enable hwmon when thermal_zone_of_sensor_register is usedKuninori Morimoto
rcar-thermal is supporting both thermal_zone_of_sensor_register() and thermal_zone_device_register(). But thermal_zone_of_sensor_register() doesn't enable hwmon as default. This patch enables it to keep compatibility Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of-thermal: Fix setting of set_emul_temp hookKeerthy
Currently thermal zone set_emul_temp is set unconditionally with of_thermal_set_emul_temp function. Set this only if the set_emul_temp hook is provided for thermal_zone_of_device_ops. This fixes emul_temp failures on platforms for which set_emul_temp hook is not populated. Fixes: "184a4bf623f (thermal: of: Extend current of-thermal.c code to allow setting emulated temp)" Suggested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Conflicts: drivers/thermal/of-thermal.c Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: fixes the exception interruptsCaesar Wang
The hardware-tracked trips will set the alarm interrupt value for registers. Then when the thermal zone has no trips to be set, That make the thermal trips callback a over range value. The root cause is the rk_tsadcv2_temp_to_code() function to handle the invalid temperature range is indeed incorrect, let's fix it on now. Otherwise, the thermal alarm interrupt will be triggered all the time on some SoCs. Fox example: localhost tmp # grep thermal /proc/interrupts; sleep 5; grep thermal /proc/interrupts 23: 994830 .. GICv3 129 Level rockchip_thermal 23: 1003423 .. GICv3 129 Level rockchip_thermal Reported-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: fixes the period time for tsadcCaesar Wang
We should increase the period cycles to save power since the rk3399 has the high frequency for tsadc clock. Fixes commit b0d70338bca22cb14 ("thermal: rockchip: Support the RK3399 SoCs in thermal driver") Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rockchip: add the set_trips functionCaesar Wang
Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A sensor driver callback `set_trips' is then called with the temperatures. Lastly, The sensor will trigger the hardware high temperature interrupts to increase the sampleing rate and throttle frequency to limit the temperature rising When performing passive cooling. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Tested-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: bang-bang governor: act on lower trip boundarySascha Hauer
With interrupt driven thermal zones we pass the lower and upper temperature on which shall be acted, so in the governor we have to act on the exact lower temperature to be consistent. Otherwise an interrupt maybe generated on the exact lower temperature, but the bang bang governor does not react since The polling driven zones have to be one step cooler before the governor reacts. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Acked-by: Peter Feuerer <peter@piie.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of: implement .set_trips for device tree thermal zonesSascha Hauer
This patch implements .set_trips for device tree thermal zones. As the hardware-tracked trip points is supported by thermal core patch[0]. patch[0] "thermal: Add support for hardware-tracked trip points". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Add support for hardware-tracked trip pointsSascha Hauer
This adds support for hardware-tracked trip points to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A .set_trips callback is then called with the temperatures. If there is no trip point above or below the current temperature, the passed trip temperature will be -INT_MAX or INT_MAX respectively. In this callback, the driver should program the hardware such that it is notified when either of these trip points are triggered. When a trip point is triggered, the driver should call `thermal_zone_device_update' for the respective thermal zone. This will cause the trip points to be updated again. If .set_trips is not implemented, the framework behaves as before. This patch is based on an earlier version from Mikko Perttunen <mikko.perttunen@kapsi.fi> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: remove declare local symbols as staticEduardo Valentin
Trivial: remove the following: drivers/thermal/qcom/tsens-8916.c:103:24: warning: symbol 'ops_8916' was not declared. Should it be static? drivers/thermal/qcom/tsens-8996.c:76:24: warning: symbol 'ops_8996' was not declared. Should it be static? drivers/thermal/qcom/tsens-8974.c:235:24: warning: symbol 'ops_8974' was not declared. Should it be static? drivers/thermal/qcom/tsens-8960.c:279:24: warning: symbol 'ops_8960' was not declared. Should it be static? Cc: Zhang Rui <rui.zhang@intel.com> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8996: Add support for 8996 family of SoCsRajendra Nayak
The TSENS controller in 8996 family of SoCs is capable of converting the ADC code outputs to real temperature values (in decidegree Celsius). It can also be programmed to provide raw ADC code, but the secure software on 8996 programs it to provide real temperatures and also does the needed calibrations. We check the valid bit to ensure valid data is read by the AHB master. And the spec recommends the below algorithm to read data 3 consecutive times, which takes care of the worst case delay taken to propagate the updated data to the register. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8960: Add support for 8960 family of SoCsRajendra Nayak
8960 family of SoCs have the TSENS device as part of GCC, hence the driver probes the virtual child device created by GCC and uses the parent to extract all DT properties and reuses the GCC regmap. Also GCC/TSENS are part of a domain thats not always ON. Hence add .suspend and .resume hooks to save and restore some of the inited register context. Also 8960 family have some of the TSENS init sequence thats required to be done by the HLOS driver (some later versions of TSENS do not export these registers to non-secure world, and hence need these initializations to be done by secure bootloaders) 8660 from the same family has just one sensor and hence some register offset/layout differences which need special handling in the driver. Based on the original code from Siddartha Mohanadoss, Stephen Boyd and Narendran Rajan. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: core: export apis to get slope and offsetRajendra Nayak
Add apis for platform thermal drivers to query for slope and offset attributes, which might be needed for temperature calculations. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8974: Add support for 8974 family of SoCsRajendra Nayak
Add .calibrate support for 8974 family as part of tsens_ops. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens-8916: Add support for 8916 family of SoCsRajendra Nayak
Add support to calibrate sensors on 8916 family and also add common functions to read temperature from sensors (This can be reused on other SoCs having similar TSENS device) The calibration data is read from eeprom using the generic nvmem framework apis. Based on the original code by Siddartha Mohanadoss and Stephen Boyd. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: qcom: tsens: Add a skeletal TSENS driversRajendra Nayak
TSENS is Qualcomms' thermal temperature sensor device. It supports reading temperatures from multiple thermal sensors present on various QCOM SoCs. Calibration data is generally read from a non-volatile memory (eeprom) device. Add a skeleton driver with all the necessary abstractions so a variety of qcom device families which support TSENS can add driver extensions. Also add the required device tree bindings which can be used to describe the TSENS device in DT. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27dmaengine: tegra-adma: enable COMPILE_TESTVinod Koul
To get more coverage, enable COMPILE_TEST for this driver. Suggested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26Input: joydev - recognize devices with Z axis as joysticksVille Ranki
Current implementation of joydev's input_device_id table recognizes only devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks. There are joystick devices that do not have those axes, for example TRC Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes causing it not being detected as joystick. This patch adds ABS_Z to the input_device_id list allowing devices with ABS_Z axis to be detected correctly. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: snvs_pwrkey - drop input_free_device call if input_register_device failsAxel Lin
Current code uses devm_input_allocate_device() so don't explicitly call input_free_device if input_register_device fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-26Input: add support for Elan eKTF2127 touchscreen controllerSiebren Vroegindeweij
This adds a driver for the Elan eKTF2127 touchscreen controller, which speaks an i2c protocol which is distinctly different from the already supported eKTH controllers. Signed-off-by: Michel Verlaan <michel.verl@gmail.com> Signed-off-by: Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-09-27thermal: cpu_cooling: Fix wrong comment call function nameHugh Kang
The last_load is updated not cpufreq_get_actual_power() function call but cpufreq_get_requested_power() function call. Signed-off-by: Inhyuk Kang <hugh.kang@lge.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Javi Merino <javi.merino@arm.com> Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-26scsi: mvsas: Mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/scsi/mvsas/mv_sas.c:77:18: warning: no previous prototype for 'mvs_find_dev_mvi' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:105:5: warning: no previous prototype for 'mvs_find_dev_phyno' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1161:20: warning: no previous prototype for 'mvs_alloc_dev' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1178:6: warning: no previous prototype for 'mvs_free_dev' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1188:5: warning: no previous prototype for 'mvs_dev_found_notify' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1244:6: warning: no previous prototype for 'mvs_dev_gone_notify' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1614:6: warning: no previous prototype for 'mvs_set_sense' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_sas.c:1653:6: warning: no previous prototype for 'mvs_fill_ssp_resp_iu' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_64xx.c:139:6: warning: no previous prototype for 'mvs_64xx_clear_srs_irq' [-Wmissing-prototypes] drivers/scsi/mvsas/mv_64xx.c:566:6: warning: no previous prototype for 'mvs_64xx_make_prd' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: pm8001: Mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/scsi/pm8001/pm8001_sas.c:530:23: warning: no previous prototype for 'pm8001_alloc_dev' [-Wmissing-prototypes] drivers/scsi/pm8001/pm8001_hwi.c:4495:5: warning: no previous prototype for 'pm8001_chip_phy_stop_req' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: arcmsr: Simplify user_len checkingBorislav Petkov
Do the user_len check first and then the ver_addr allocation so that we can save us the kfree() on the error path when user_len is > ARCMSR_API_DATA_BUFLEN. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Marco Grassi <marco.gra@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Tomas Henzl <thenzl@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: Avoid that toggling use_blk_mq triggers a memory leakBart Van Assche
This patch avoids that the following memory leak is triggered if use_blk_mq is disabled after a SCSI host has been allocated by the ib_srp driver and before the same SCSI host is freed: unreferenced object 0xffff8803a168c568 (size 256): backtrace: [<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0 [<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400 [<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230 [<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0 [<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0 [<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp] [<ffffffff8143ce23>] dev_attr_store+0x13/0x20 [<ffffffff8125f030>] sysfs_kf_write+0x40/0x50 [<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0 [<ffffffff811d8c13>] __vfs_write+0x23/0x140 [<ffffffff811d92e0>] vfs_write+0xb0/0x190 [<ffffffff811da5b4>] SyS_write+0x44/0xa0 [<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Fixes: 9aa9cc4221f5 ("scsi: remove the disable_blk_mq host flag") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: fcoe: fix off by one in eth2fc_speed()Vincent Stehlé
This should be "< ARRAY_SIZE()" instead of "<= ARRAY_SIZE()". Fixes: 0b924e5505a568e7 ("scsi: fcoe: provide translation table between Ethernet and FC port speeds") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: dtc: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: t128: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: pas16: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: u14-34f: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: ultrastor: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: in2000: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: wd7000: remove from treeChristoph Hellwig
The driver has not seen any maintainer activity or other work that wasn't tree wide conversion or clenaups in the entire history of the git tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()tang.junhui
buff should be freed before returning with SCSI_DH_RETRY in alua_rtpg(). Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26scsi: lpfc: Mark symbols static where possibleBaoyou Xie
We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26net: tg3: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26staging: rtl8192e: fixed block comments should align the * on each lineDarryl T. Agostinelli
shifted over comment block one space Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-26staging: rtl8172: usb_intf.c: Fixed block comment coding styleGonçalo Salazar
Fixed a block comment indentation in the rtl8712 usb_intf.c file. Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-26iwlwifi: mvm: initialise ADD_STA before sending it to the firmwareEmmanuel Grumbach
When we unshare a queue, the ADD_STA was not properly initialised. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: allow error table address new rangeSara Sharon
The firmware has a new smart linker, and this table can now be in ICCM or in SMEM. It is not hardcoded, but depends on code size. Allow the full range. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: mvm: fix typo in TC_CMD_SEC_KEY_FROM_TABLEEmmanuel Grumbach
This define should really be TX_CMD_SEC_KEY_FROM_TABLE Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: remove support for fw older than -17 and -22Luca Coelho
FW versions older than -17 for 3160 and 7260 and older than -22 for newer NICs are not supported anymore. Don't load these versions and remove code that handles them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26vfio-pci: Disable INTx after MSI/X teardownAlex Williamson
The MSI/X shutdown path can gratuitously enable INTx, which is not something we want to happen if we're dealing with broken INTx device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-09-26vfio-pci: Virtualize PCIe & AF FLRAlex Williamson
We use a BAR restore trick to try to detect when a user has performed a device reset, possibly through FLR or other backdoors, to put things back into a working state. This is important for backdoor resets, but we can actually just virtualize the "front door" resets provided via PCIe and AF FLR. Set these bits as virtualized + writable, allowing the default write to set them in vconfig, then we can simply check the bit, perform an FLR of our own, and clear the bit. We don't actually have the granularity in PCI to specify the type of reset we want to do, but generally devices don't implement both PCIe and AF FLR and we'll favor these over other types of reset, so we should generally lineup. We do test whether the device provides the requested FLR type to stay consistent with hardware capabilities though. This seems to fix several instance of devices getting into bad states with userspace drivers, like dpdk, running inside a VM. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Greg Rose <grose@lightfleet.com>
2016-09-26Merge branch 'x86/urgent' into x86/apicThomas Gleixner
Bring in the upstream modifications so we can fixup the silent merge conflict which is introduced by this merge. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2025-09-16 18:42:03 +0000