summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-05serial: tegra: report error to upper tty layerKrishna Yarlagadda
Report overrun/parity/frame/break errors to top tty layer. Add support to ignore break character if IGNBRK is set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-5-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: flush the RX fifo on frame errorShardar Shariff Md
FIFO reset/flush code implemented now does not follow programming guidelines. RTS line has to be turned off while flushing FIFOs to avoid new transfers. Also check LSR bits UART_LSR_TEMT and UART_LSR_DR to confirm FIFOs are flushed. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-4-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: avoid reg access when clk disabledAhung Cheng
This avoids two race conditions from the UART shutdown sequence both leading to 'Machine check error in AXI2APB' and kernel oops. One was that the clock was disabled before the DMA was terminated making it possible for the DMA callbacks to be called after the clock was disabled. These callbacks could write to the UART registers causing timeout. The second was that the clock was disabled before the UART was completely flagged as closed. This is done after the shutdown is called and a new write could be started after the clock was disabled. tegra_uart_start_pio_tx could be called causing timeout. Given that the baud rate is reset at the end of shutdown sequence, this fix is to examine the baud rate to avoid register access from both race conditions. Besides, terminate the DMA before disabling the clock. Signed-off-by: Ahung Cheng <ahcheng@nvidia.com> Signed-off-by: Shardar Mohammed <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-3-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to ignore readShardar Shariff Md
Add support to ignore read characters if CREAD flag is not set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-2-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: sprd: correct the wrong sequence of argumentsChunyan Zhang
The sequence of arguments which was passed to handle_lsr_errors() didn't match the parameters defined in that function, &lsr was passed to flag and &flag was passed to lsr, this patch fixed that. Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: max310x: turn off transmitter before activating AutoCTS or auto ↵Christoph Vogtländer
transmitter flow control As documented in the data-sheet, the transmitter must be disabled before activating AutoCTS or auto transmitter flow control. Accordingly, the transmitter must be enabled after AutoCTS or auto transmitter flow control gets deactivated. Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> Link: https://lore.kernel.org/r/20190904121746.4641-1-c.vogtlaender@sigma-surface-science.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: max310x: Properly set flags in AutoCTS modeChristoph Vogtländer
Commit 391f93f2ec9f ("serial: core: Rework hw-assisted flow control support") has changed the way the AutoCTS mode is handled. According to that change, serial drivers which enable H/W AutoCTS mode must set UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF to prevent the serial core from inadvertently disabling RX or TX. This patch adds proper handling of UPSTAT_AUTORTS, UPSTAT_AUTOCTS and UPSTAT_AUTOXOFF flags. Signed-off-by: Christoph Vogtländer <c.vogtlaender@sigma-surface-science.com> Link: https://lore.kernel.org/r/20190904121141.4570-1-c.vogtlaender@sigma-surface-science.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05Merge tag 'linux-can-next-for-5.4-20190903' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2019-09-03 this is a pull request for net-next/master consisting of 15 patches. The first patch is by Christer Beskow, targets the kvaser_pciefd driver and fixes the PWM generator's frequency. The next three patches are by Dan Murphy, the tcan4x5x is updated to use a proper interrupts/interrupt-parent DT binding to specify the devices IRQ line. Further the unneeded wake ups of the device is removed from the driver. A patch by me for the mcp25xx driver removes the deprecated board file setup example. Three patches by Andy Shevchenko simplify clock handling, update the driver from OF to device property API and simplify the mcp251x_can_suspend() function. The remaining 7 patches are by me and clean up checkpatch warnings in the generic CAN device infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net/tls: use the full sk_proto pointerJakub Kicinski
Since we already have the pointer to the full original sk_proto stored use that instead of storing all individual callback pointers as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Convert usage of IN_MULTICAST to ipv4_is_multicastDave Taht
IN_MULTICAST's primary intent is as a uapi macro. Elsewhere in the kernel we use ipv4_is_multicast consistently. This patch unifies linux's multicast checks to use that function rather than this macro. Signed-off-by: Dave Taht <dave.taht@gmail.com> Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05staging: rtl8723bs: Remove return statement from void functionLeandro Ribeiro
Fix the following checkpatch warning: "WARNING: void function return statements are not generally useful" Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net> Link: https://lore.kernel.org/r/20190904210631.13599-1-leandrohr@riseup.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05staging: rtl8192e: remove unnecessary blank lineBeatriz Martins de Carvalho
Fix checkpath error "CHECK: Blank lines aren't necessary after an open brace '{'" in rtllib.h:482. Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com> Link: https://lore.kernel.org/r/20190904210326.17983-1-martinsdecarvalhobeatriz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05staging: exfat: Use kmemdup in exfat_symlink()YueHaibing
Use kmemdup rather than duplicating its implementation Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190905030047.88401-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05staging: exfat: remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190905025623.63210-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05staging: exfat: remove duplicated include from exfat_super.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190905025608.61884-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05ionic: Add coalesce and other featuresShannon Nelson
Interrupt coalescing, tunable copybreak value, and tx timeout. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add RSS supportShannon Nelson
Add code to manipulate through ethtool the RSS configuration used by the NIC. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add driver statsShannon Nelson
Add in the detailed statistics for ethtool -S that the driver keeps as it processes packets. Display of the additional debug statistics can be enabled through the ethtool priv-flags feature. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add netdev-event handlingShannon Nelson
When the netdev gets a new name from userland, pass that name down to the NIC for internal tracking. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add Tx and Rx handlingShannon Nelson
Add both the Tx and Rx queue setup and handling. The related stats display comes later. Instead of using the generic napi routines used by the slow-path commands, the Tx and Rx paths are simplified and inlined in one file in order to get better compiler optimizations. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add initial ethtool supportShannon Nelson
Add in the basic ethtool callbacks for device information and control. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add async link status check and basic statsShannon Nelson
Add code to handle the link status event, and wire up the basic netdev hardware stats. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add Rx filter and rx_mode ndo supportShannon Nelson
Add the Rx filtering and rx_mode NDO callbacks. Also add the deferred work thread handling needed to manage the filter requests outside of the netif_addr_lock spinlock. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add management of rx filtersShannon Nelson
Set up the infrastructure for managing Rx filters. We can't ask the hardware for what filters it has, so we keep a local list of filters that we've pushed into the HW. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add the basic NDO callbacks for netdev supportShannon Nelson
Set up the initial NDO structure and callbacks for netdev to use, and register the netdev. This will allow us to do a few basic operations on the device, but no traffic yet. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add notifyq supportShannon Nelson
The AdminQ is fine for sending messages and requests to the NIC, but we also need to have events published from the NIC to the driver. The NotifyQ handles this for us, using the same interrupt as AdminQ. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add adminq actionShannon Nelson
Add AdminQ specific message requests and completion handling. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add basic adminq supportShannon Nelson
Most of the NIC configuration happens through the AdminQ message queue. NAPI is used for basic interrupt handling and message queue management. These routines are set up to be shared among different types of queues when used in slow-path handling. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add interrupts and doorbellsShannon Nelson
The ionic interrupt model is based on interrupt control blocks accessed through the PCI BAR. Doorbell registers are used by the driver to signal to the NIC that requests are waiting on the message queues. Interrupts are used by the NIC to signal to the driver that answers are waiting on the completion queues. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add basic lif supportShannon Nelson
The LIF is the Logical Interface, which represents the external connections. The NIC can multiplex many LIFs to a single port, but in most setups, LIF0 is the primary control for the port. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add port management commandsShannon Nelson
The port management commands apply to the physical port associated with the PCI device, which might be shared among several logical interfaces. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add hardware init and device commandsShannon Nelson
The ionic device has a small set of PCI registers, including a device control and data space, and a large set of message commands. Also adds new DEVLINK_INFO_VERSION_GENERIC tags for ASIC_ID, ASIC_REV, and FW. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05ionic: Add basic framework for IONIC Network device driverShannon Nelson
This patch adds a basic driver framework for the Pensando IONIC network device. There is no functionality right now other than the ability to load and unload. Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05Merge branch 'cpufreq/arm/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar: "This contains: - Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent). - Minor updates for imx driver (Anson Huang). - Minor fix for ti-cpufreq driver (Gustavo A. R. Silva). - Minor fix for ap806 driver (Hariprasad Kelam). - Significant updates to qcom cpufreq drivers, mostly to support CPR stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas RAILLARD and Sricharan R). - New sun50i cpufreq driver (Yangtao Li). It also contains a few OPP changes which were required because of dependencies for the qcom cpufreq changes." * 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading cpufreq: qcom-hw: invoke frequency-invariance setter function cpufreq: qcom-hw: Update logic to detect turbo frequency cpufreq: mediatek-cpufreq: Add compatible for MT8516 cpufreq: ti-cpufreq: Mark expected switch fall-through dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs opp: Add dev_pm_opp_find_level_exact() opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() opp: Not all power-domains are scalable cpufreq: ap806: Add NULL check after kcalloc ...
2019-09-05Merge branch 'pm-cpufreq-qos'Rafael J. Wysocki
* pm-cpufreq-qos: Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits thermal: cpu_cooling: Switch to QoS requests for freq limits cpufreq: Add policy create/remove notifiers back
2019-09-05Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework changes for 5.4 from Viresh Kumar: "This contains: - OPP core fixes to better support genpd devices (Viresh Kumar). - OPP core changes to support multiple suspend-opps in DT (Anson Huang). - New OPP API (dev_pm_opp_find_level_exact()) and Qcom OPP binding changes for CPR (Niklas Cassel). - Qcom minor update (Sricharan R). - OPP Documentation fix (Yue Hu). - OPP core support to enable/disable regulators (k.konieczny)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs PM / OPP: Correct Documentation about library location opp: of: Support multiple suspend OPPs defined in DT dt-bindings: opp: Support multiple opp-suspend properties opp: core: add regulators enable and disable opp: Don't decrement uninitialized list_kref opp: Add dev_pm_opp_find_level_exact() opp: Return genpd virtual devices from dev_pm_opp_attach_genpd() opp: Not all power-domains are scalable
2019-09-05Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2019-09-05 Here are a few more Bluetooth fixes for 5.3. I hope they can still make it. There's one USB ID addition for btusb, two reverts due to discovered regressions, and two other important fixes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05crypto: n2 - Rename arrays to avoid conflict with crypto/sha256.hHans de Goede
Rename the sha*_init arrays to n2_sha*_init so that they do not conflict with the functions declared in crypto/sha256.h. Also rename md5_init to n2_md5_init for consistency. This is a preparation patch for folding crypto/sha256.h into crypto/sha.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: chelsio - Rename arrays to avoid conflict with crypto/sha256.hHans de Goede
Rename the sha*_init arrays to chcr_sha*_init so that they do not conflict with the functions declared in crypto/sha256.h. This is a preparation patch for folding crypto/sha256.h into crypto/sha.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: ccree - Rename arrays to avoid conflict with crypto/sha256.hHans de Goede
Rename the algo_init arrays to cc_algo_init so that they do not conflict with the functions declared in crypto/sha256.h. This is a preparation patch for folding crypto/sha256.h into crypto/sha.h. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05hwrng: timeriomem - relax check on memory resource sizeDaniel Mack
The timeriomem_rng driver only accesses the first 4 bytes of the given memory area and currently, it also forces that memory resource to be exactly 4 bytes in size. This, however, is problematic when used with device-trees that are generated from things like FPGA toolchains, where the minimum size of an exposed memory block may be something like 4k. Hence, let's only check for what's needed for the driver to operate properly; namely that we have enough memory available to read the random data from. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Added support for basic AES-CCMPascal van Leeuwen
This patch adds support for the basic AES-CCM AEAD cipher suite. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Added AES-OFB supportPascal van Leeuwen
This patch adds support for AES in output feedback mode (AES-OFB). Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Added AES-CFB supportPascal van Leeuwen
This patch adds support for AES in 128 bit cipher feedback mode (AES-CFB). Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Added support for basic AES-GCMPascal van Leeuwen
This patch adds support for the basic AES-GCM AEAD cipher suite. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Minor code cleanup and optimizationsPascal van Leeuwen
Some minor cleanup changing e.g. "if (!x) A else B" to "if (x) B else A", merging some back-to-back if's with the same condition, collapsing some back-to-back assignments to the same variable and replacing some weird assignments with proper symbolics. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Minor optimization recognizing CTR is always AESPascal van Leeuwen
Moved counter mode handling code in front as it doesn't depend on the rest of the code to be executed, it can just do its thing and exit. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Made .cra_priority value a definePascal van Leeuwen
Instead of having a fixed value (of 300) all over the place, the value for for .cra_priority is now made into a define (SAFEXCEL_CRA_PRIORITY). This makes it easier to play with, e.g. during development. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Only enable algorithms advertised by the hardwarePascal van Leeuwen
This patch probes the supported algorithms from the hardware and only registers the ones that the hardware actually supports. This is necessary because this is a generic driver supposed to run on a wide variety of engines, which may or may not implement certain algorithms. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-09-05crypto: inside-secure - Add support for the AES-XTS algorithmPascal van Leeuwen
This patch adds support for the AES-XTS skcipher algorithm. Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-19 17:55:09 +0000