| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big theme for this release has been performance, we've had a
series of unrelated overhauls of a few drivers all with a big
peformance component.
Otherwise it's been relatively quiet, highlights include:
- A big overhaul of the spi-fsl-dspi driver improving the code
quality, performance and stability from Vladimir Oltean.
- A big performance enhancement for the bc2835 (Raspberry Pi) driver
for unidirectional transfers from Lukas Wunner.
- Improved performance on small transfers for the uniphier driver
from Keiji Hayashibara.
- Lots of coccinelle generated cleanups from Yue Haibing.
- New device support for Freescale ls2080a and Nuvoton NPCM FIU"
* tag 'spi-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (102 commits)
spi: mediatek: support large PA
spi: mediatek: add spi support for mt6765 IC
dt-bindings: spi: update bindings for MT6765 SoC
spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO
spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO
dmaengine: bcm2835: Avoid accessing memory when copying zeroes
spi: bcm2835: Cache CS register value for ->prepare_message()
dmaengine: bcm2835: Document struct bcm2835_dmadev
spi: Guarantee cacheline alignment of driver-private data
dmaengine: bcm2835: Allow reusable descriptors
dmaengine: bcm2835: Allow cyclic transactions without interrupt
spi: bcm2835: Drop dma_pending flag
spi: bcm2835: Work around DONE bit erratum
spi-gpio: Use PTR_ERR_OR_ZERO() in spi_gpio_request()
spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
spi: npcm-fiu: remove set but not used variable 'retlen'
spi: fsl-spi: use devm_platform_ioremap_resource() to simplify code
spi: zynq-qspi: use devm_platform_ioremap_resource() to simplify code
spi: zynqmp: use devm_platform_ioremap_resource() to simplify code
spi: xlp: use devm_platform_ioremap_resource() to simplify code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A small update for the regualtor API for this cycle, some small fixes
and a bunch of new devices but none of them very big.
The most stand out thing is the regulator-fixed-clock driver which is
for regulators where the enable control is done by using a clock
instead of a GPIO or register write, a novel hardware design that had
not previously come up.
Summary:
- Added a keyword pattern for regulator_get_optional() since usage of
that API generally needs extra review.
- Operating mode and suspend state support for act8865.
- New device support for Active Semiconductor ACT8600 chargers,
Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
Synoptics SY20276, SY20278 and SY8824E"
* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
regulator: core: Fix error return for /sys access
regulator: da9211: fix obtaining "enable" GPIO
regulator: max77686: fix obtaining "maxim,ena" GPIO
regulator: uniphier: Add Pro5 USB3 VBUS support
dt-bindings: regulator: add regulator-fixed-clock binding
regulator: fixed: add possibility to enable by clock
regulator: s2mps11: Consistently use local variable
regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
regulator: slg51000: use devm_gpiod_get_optional() in probe
regulator: lp8788-ldo: make array en_mask static const, makes object smaller
regulator: tps65132: Stop parsing DT when gpio is not found
regulator: Defer init completion for a while after late_initcall
regulator: add missing 'static inline' to a helper's stub
regulator: provide regulator_bulk_set_supply_names()
MAINTAINERS: Add keyword pattern on regulator_get_optional()
regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
regulator: sy8824x: use c++style for the comment block near SPDX
regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
regulator: mt6358: Add support for MT6358 regulator
regulator: Add document for MT6358 regulator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Only two changes for this release, one fix for error handling with
runtime PM and a change from Greg removing error handling from debugfs
API calls now that they implement user visible error reporting"
* tag 'regmap-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Correct error paths in regmap_irq_thread for pm_runtime
regmap: no need to check return value of debugfs_create functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Inspur Power System power supply driver
- Synaptics AS370 PVT sensor driver
Chip support:
- support SHTC3 in shtc1 driver
- support NCT6116 in nct6775 driver
- support AMD family 17h, model 70h CPUs in k10temp driver
- support PCT2075 in lm75 driver
Removed drivers:
- ads1015 driver (now supported in iio)
Other changes:
- Convert drivers to use devm_i2c_new_dummy_device
- Substantial structural improvements in lm75 driver adding support
for writing sample interval for supported chips
- Add support for PSU version 2 to ibm-cffps driver
- Add support for power attribute to iio_hwmon bridge
- Add support for additional fan, voltage and temperature attributes
to nct7904 driver
- Convert adt7475 driver to use hwmon_device_register_with_groups()
- Convert k8temp driver to use hwmon_device_register_with_info()
- Various other improvements and minor fixes"
* tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
hwmon: submitting-patches: Add note on comment style
hwmon: submitting-patches: Point to with_info API
hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan.
hwmon: (shtc1) add support for the SHTC3 sensor
hwmon: (shtc1) fix shtc1 and shtw1 id mask
hwmon: (lm75) Aproximate sample times to data-sheet values
hwmon: (w83793d) convert to use devm_i2c_new_dummy_device
hwmon: (w83792d) convert to use devm_i2c_new_dummy_device
hwmon: (w83791d) convert to use devm_i2c_new_dummy_device
hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings
hwmon: (lm75) Add support for writing sampling period on PCT2075
hwmon: (lm75) Add support for writing conversion time for TMP112
hwmon: (lm75) Move updating the sample interval to its own function
hwmon: (lm75) Support configuring the sample time for various chips
hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT
hwmon: Add Synaptics AS370 PVT sensor driver
pmbus: (ibm-cffps) Add support for version 2 of the PSU
dt-bindings: hwmon: Document ibm,cffps2 compatible string
hwmon: (iio_hwmon) Enable power exporting from IIO
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
"The latest meager RAS updates:
- Enable processing of action-optional MCEs which have the Overflow
bit set (Tony Luck)
- -Wmissing-prototypes warning fix and a build fix (Valdis
Klētnieks)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS: Build debugfs.o only when enabled in Kconfig
RAS: Fix prototype warnings
x86/mce: Don't check for the overflow bit on action optional machine checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
"The new thing this time around is that we have three maintainers now
and a new, old repo. New because it is new for the EDAC tree which is
hosted there from now on and old because it is Tony's and mine's old
RAS repo which we still use occasionally when the stuff isn't in tip.
Summary:
- EDAC tree has three maintainers and one new designated reviewer
now, so that the work can scale better.
- New driver for Mellanox' BlueField SoC DDR controller (Shravan
Kumar Ramani)
- AMD Rome support in amd64_edac (Yazen Ghannam and Isaac Vaughn)
- Misc fixes, cleanups and code improvements"
* tag 'edac_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Add PCI device IDs for family 17h, model 70h
MAINTAINERS: Add Robert as a EDAC reviewer
EDAC/mc_sysfs: Make debug messages consistent
EDAC/mc_sysfs: Remove pointless gotos
EDAC: Prefer 'unsigned int' to bare use of 'unsigned'
EDAC/amd64: Support asymmetric dual-rank DIMMs
EDAC/amd64: Cache secondary Chip Select registers
EDAC/amd64: Decode syndrome before translating address
EDAC/amd64: Find Chip Select memory size using Address Mask
EDAC/amd64: Initialize DIMM info for systems with more than two channels
EDAC/amd64: Recognize DRAM device type ECC capability
EDAC/amd64: Support more than two controllers for chip selects handling
EDAC/mc: Cleanup _edac_mc_free() code
EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()
EDAC, mellanox: Add ECC support for BlueField DDR4
EDAC/altera: Use the proper type for the IRQ status bits
EDAC/mc: Fix grain_bits calculation
edac: altera: Move Stratix10 SDRAM ECC to peripheral
MAINTAINERS: update EDAC entry to reflect current tree and maintainers
|
|
Pull tpm updates from Jarkko Sakkinen:
"A new driver for fTPM living inside ARM TEE was added this round.
In addition to that, there are three bug fixes and one clean up"
* tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: Document fTPM TEE driver
tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE
tpm: Remove a deprecated comments about implicit sysfs locking
tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts
tpm_tis_core: Turn on the TPM before probing IRQ's
MAINTAINERS: fix style in KEYS-TRUSTED entry
|
|
Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The regmap update bits call was not selecting the proper mask, considering
the bits which was updating.
Update the mask from call to also include OSCBYPASS.
Removed MOSCEN which was not updated.
Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The ARM w90x900 platform is getting removed, so this driver is obsolete
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190809202749.742267-7-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The platform is getting removed, so there are no remaining
users of this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190809202749.742267-5-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The only thing that prevents building this driver on other
platforms is the mach/hardware.h include, which is not actually
used here at all, so remove the line and allow CONFIG_COMPILE_TEST.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809144043.476786-4-arnd@arndb.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
While debugging packet loss towards the CPU, it is useful to be able to
query the CPU port's shared buffer quotas and occupancy.
Since the CPU port has no ingress buffers, all the shared buffers ingress
information will be cleared.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register CPU port with devlink.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Next patch is going to register the CPU port with devlink, but only so
that the CPU port's shared buffer configuration and occupancy could be
queried.
Prevent changing CPU port's shared buffer threshold and binding
configuration.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ena_dev->intr_moder_rx/tx_interval save the intervals received from the
user after dividing them by ena_dev->intr_delay_resolution. Therefore
when intr_delay_resolution changes, the code needs to first mutiply
intr_moder_rx/tx_interval by the previous intr_delay_resolution to get
the value originally given by the user, and only then divide it by the
new intr_delay_resolution.
Current code does not first multiply intr_moder_rx/tx_interval by the old
intr_delay_resolution. This commit fixes it.
Also initialize ena_dev->intr_delay_resolution to be 1.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nonadaptive interrupt moderation intervals are assigned the value set
by the user in ethtool -C divided by ena_dev->intr_delay_resolution.
Therefore when the user tries to get the nonadaptive interrupt moderation
intervals with ethtool -c the code needs to multiply the saved value
by ena_dev->intr_delay_resolution.
The current code erroneously divides instead of multiplying in ethtool -c.
This patch fixes this.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current implementation always updates the interrupt register with
the smoothed_interval of the rx_ring. However this should be
done only in case of adaptive interrupt moderation. If non-adaptive
interrupt moderation is used, the non-adaptive interrupt moderation
interval should be used. This commit fixes that.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove previous implementation of adaptive rx interrupt moderation
from ena_com files.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Deleted unused 4 fields from struct ena_adapter and their only user
ena_restore_ethtool_params().
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. Out of the fields {per_napi_bytes, per_napi_packets} in struct ena_ring,
only rx_ring->per_napi_packets are used to determine if napi did work
for dim.
This commit removes all other uses of these fields.
2. Remove ena_ring->moder_tbl_idx, which is not used by dim.
3. Remove all calls to ena_com_destroy_interrupt_moderation(), since all it
did was to destroy the interrupt moderation table, which is removed as
part of removing old interrupt moderation code.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ena_com_update_nonadaptive_moderation_interval _*()
Remove code duplication in:
ena_com_update_nonadaptive_moderation_interval_tx()
ena_com_update_nonadaptive_moderation_interval_rx()
functions.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add driver_supported_features to host_host info which is a new API used to
communicate to the device which features are supported by the driver.
Add the interrupt_moderation bit to host_info->driver_supported_features
and enable it to signal the device that this driver supports interrupt
moderation properly.
Reserved bits are for features implemented in the future
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. Remove old adaptive interrupt moderation code from set/get_coalesce()
2. Add ena_update_rx_rings_intr_moderation() function for updating
nonadaptive interrupt moderation intervals similarly to
ena_update_tx_rings_intr_moderation().
3. Remove checks of multiple unsupported received interrupt coalescing
parameters. This makes code cleaner and cancels the need to update
it every time a new coalescing parameter is invented.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the dim library for the rx adaptive interrupt moderation implementation
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add intr_moder_rx_interval to struct ena_com_dev and use it as the
location where the interrupt moderation rx interval is saved, instead
of the interrupt moderation table.
This is done as a first step before removing the old interrupt moderation
code.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD`
phy-tunable feature.
EDPD is also enabled by default on PHY config_init, but can be disabled via
the phy-tunable control.
When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX
periodic pulses, so that in case the other PHY is also on EDPD mode, there
is no lock-up situation where both sides are waiting for the other to
transmit.
Via the phy-tunable control, TX pulses can be disabled if specifying 0
`tx-interval` via ethtool.
The ADIN PHY supports only fixed 1 second intervals; they cannot be
configured. That is why the acceptable values are 1,
ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables
TX pulses).
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When skb_shinfo(skb) is not able to cache extra fragment (that is,
skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes
the sk_buff_head list is already empty. As a result, cons is increased only
by 1 and returns to error handling path in xennet_poll().
However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be
set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring
buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are
already cleared to NULL. This leads to NULL pointer access in the next
iteration to process rx ring buffer entries.
Below is how xennet_poll() does error handling. All remaining entries in
tmpq are accounted to queue->rx.rsp_cons without assuming how many
outstanding skbs are remained in the list.
985 static int xennet_poll(struct napi_struct *napi, int budget)
... ...
1032 if (unlikely(xennet_set_skb_gso(skb, gso))) {
1033 __skb_queue_head(&tmpq, skb);
1034 queue->rx.rsp_cons += skb_queue_len(&tmpq);
1035 goto err;
1036 }
It is better to always have the error handling in the same way.
Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dev_kfree_skb() function performs also input parameter validation.
Thus the test around the shown calls is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a race condition that can occur when calling ena_down().
The ena_clean_tx_irq() - which is a part of the napi handler -
function might wake up the tx queue when the queue is supposed
to be down (during recovery or changing the size of the queues
for example) This causes the ena_start_xmit() function to trigger
and possibly try to access the destroyed queues.
The race is illustrated below:
Flow A: Flow B(napi handler)
ena_down()
netif_carrier_off()
netif_tx_disable()
ena_clean_tx_irq()
netif_tx_wake_queue()
ena_napi_disable_all()
ena_destroy_all_io_queues()
After these flows the tx queue is active and ena_start_xmit() accesses
the destroyed queue which leads to a kernel panic.
fixes: 1738cd3ed342 (net: ena: Add a driver for Amazon Elastic Network Adapters (ENA))
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver periodically generates "trapped" UDP packets that it then
passes on to devlink. Set the offsets to the various protocol layers.
This is a prerequisite to the next patch, where drop monitor is taught
to check that the offset to the MAC header was set.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This qdisc offload is the closest thing to what the SJA1105 supports in
hardware for time-based egress shaping. The switch core really is built
around SAE AS6802/TTEthernet (a TTTech standard) but can be made to
operate similarly to IEEE 802.1Qbv with some constraints:
- The gate control list is a global list for all ports. There are 8
execution threads that iterate through this global list in parallel.
I don't know why 8, there are only 4 front-panel ports.
- Care must be taken by the user to make sure that two execution threads
never get to execute a GCL entry simultaneously. I created a O(n^4)
checker for this hardware limitation, prior to accepting a taprio
offload configuration as valid.
- The spec says that if a GCL entry's interval is shorter than the frame
length, you shouldn't send it (and end up in head-of-line blocking).
Well, this switch does anyway.
- The switch has no concept of ADMIN and OPER configurations. Because
it's so simple, the TAS settings are loaded through the static config
tables interface, so there isn't even place for any discussion about
'graceful switchover between ADMIN and OPER'. You just reset the
switch and upload a new OPER config.
- The switch accepts multiple time sources for the gate events. Right
now I am using the standalone clock source as opposed to PTP. So the
base time parameter doesn't really do much. Support for the PTP clock
source will be added in a future series.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preparation patch for the tc-taprio offload (and potentially
for other future offloads such as tc-mqprio).
Instead of looking directly at skb->priority during xmit, let's get the
netdev queue and the queue-to-traffic-class mapping, and put the
resulting traffic class into the dsa_8021q PCP field. The switch is
configured with a 1-to-1 PCP-to-ingress-queue-to-egress-queue mapping
(see vlan_pmap in sja1105_main.c), so the effect is that we can inject
into a front-panel's egress traffic class through VLAN tagging from
Linux, completely transparently.
Unfortunately the switch doesn't look at the VLAN PCP in the case of
management traffic to/from the CPU (link-local frames at
01-80-C2-xx-xx-xx or 01-1B-19-xx-xx-xx) so we can't alter the
transmission queue of this type of traffic on a frame-by-frame basis. It
is only selected through the "hostprio" setting which ATM is harcoded in
the driver to 7.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to support tc-taprio offload, the TTEthernet egress scheduling
core registers must be made visible through the static interface.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The cited commit introduced a double-free of the srq buffer in the error
flow of procedure __uverbs_create_xsrq().
The problem is that ib_destroy_srq_user() called in the error flow also
frees the srq buffer.
Thus, if uverbs_response() fails in __uverbs_create_srq(), the srq buffer
will be freed twice.
Cc: <stable@vger.kernel.org>
Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core")
Link: https://lore.kernel.org/r/20190916071154.20383-5-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The error print should indicate that it failed to get the queue
attributes, not network attributes.
Link: https://lore.kernel.org/r/20190910134301.4194-2-galpress@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.
Cc: <stable@vger.kernel.org>
Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.
The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().
Fixes: 0f51427bd097 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
This new state is required when firmware indicates that the error
recovery process requires polling for firmware state to be completely
down before initiating reset. For example, firmware may take some
time to collect the crash dump before it is down and ready to be
reset.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some error recovery updates to the spec., among other minor changes.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Firmware coredump messages take much longer than standard messages,
so increase the timeout accordingly.
Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check the BNXT_STATE_OPEN flag instead of netif_running() in
bnxt_set_rx_mode(). If the driver is going through any reset, such
as firmware reset or even TX timeout, it may not be ready to set the RX
mode and may crash. The new rx mode settings will be picked up when
the device is opened again later.
Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of writing "null_blk: " at the beginning of each
pr_err/info/warn log message, format messages using pr_fmt() macro.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since the variable nr_devices is an unsigned int, the module_param()
should also use this type. Change the type so they can match.
Fixes: f7c4ce890dd2 ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The module load should fail only if there is something wrong with the
configuration or if an error prevents it to work properly. The module
should be able to be loaded with (nr_device == 0), since it will not
trigger errors or be in malfunction state. Preventing loading with zero
devices also breaks applications that configures this module using
configfs API. Remove the nr_device check to fix this.
Fixes: f7c4ce890dd2 ("null_blk: validate the number of devices")
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The MDIO device reset line is optional and now that gpiod_get_optional()
returns proper value when GPIO support is compiled out, there is no
reason to use fwnode_get_named_gpiod() that I plan to hide away.
Let's switch to using more standard gpiod_get_optional() and
gpiod_set_consumer_name() to keep the nice "PHY reset" label.
Also there is no reason to only try to fetch the reset GPIO when we have
OF node, gpiolib can fetch GPIO data from firmwares as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit introduces a new ioctl DM_GET_TARGET_VERSION. It will load a
target that is specified in the "name" entry in the parameter structure
and return its version.
This functionality is intended to be used by cryptsetup, so that it can
query kernel capabilities before activating the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-09-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Now that initial BPF backend for gcc has been merged upstream, enable
BPF kselftest suite for bpf-gcc. Also fix a BE issue with access to
bpf_sysctl.file_pos, from Ilya.
2) Follow-up fix for link-vmlinux.sh to remove bash-specific extensions
related to recent work on exposing BTF info through sysfs, from Andrii.
3) AF_XDP zero copy fixes for i40e and ixgbe driver which caused umem
headroom to be added twice, from Ciara.
4) Refactoring work to convert sock opt tests into test_progs framework
in BPF kselftests, from Stanislav.
5) Fix a general protection fault in dev_map_hash_update_elem(), from Toke.
6) Cleanup to use BPF_PROG_RUN() macro in KCM, from Sami.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in a literal string, fix it.
Fixes: 89f81008baac ("RDMA/bnxt_re: expose detailed stats retrieved from HW")
Link: https://lore.kernel.org/r/20190911092856.11146-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Here packages the codes of allocating and freeing rq inline buffer in
hns_roce_create_qp_common function in order to reduce the complexity.
Link: https://lore.kernel.org/r/1567068102-56919-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
