summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-13mlx4: Split restart_one into two functionsJiri Pirko
Split the function restart_one into two functions and separate teardown and buildup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13md: add feature flag MD_FEATURE_RAID0_LAYOUTNeilBrown
Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13md/raid0: avoid RAID0 data corruption due to layout confusion.NeilBrown
If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't set STRIPE_HANDLE to stripe which is in batch listGuoqing Jiang
If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.html Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't increment read_errors on EILSEQ returnNigel Croxon
While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13cdc_ether: fix rndis support for Mediatek based smartphonesBjørn Mork
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13IB/hfi1: Define variables as unsigned long to fix KASAN warningIra Weiny
Define the working variables to be unsigned long to be compatible with for_each_set_bit and change types as needed. While we are at it remove unused variables from a couple of functions. This was found because of the following KASAN warning: ================================================================== BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889 CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] Call Trace: dump_stack+0x9a/0xf0 ? find_first_bit+0x19/0x70 print_address_description+0x6c/0x332 ? find_first_bit+0x19/0x70 ? find_first_bit+0x19/0x70 __kasan_report.cold.6+0x1a/0x3b ? find_first_bit+0x19/0x70 kasan_report+0xe/0x12 find_first_bit+0x19/0x70 pma_get_opa_portstatus+0x5cc/0xa80 [hfi1] ? ret_from_fork+0x3a/0x50 ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1] ? stack_trace_consume_entry+0x80/0x80 hfi1_process_mad+0x39b/0x26c0 [hfi1] ? __lock_acquire+0x65e/0x21b0 ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? check_chain_key+0x1d7/0x2e0 ? lock_downgrade+0x3a0/0x3a0 ? match_held_lock+0x2e/0x250 ib_mad_recv_done+0x698/0x15e0 [ib_core] ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? ib_mad_send_done+0xc80/0xc80 [ib_core] ? mark_held_locks+0x79/0xa0 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? rvt_poll_cq+0x1e1/0x340 [rdmavt] __ib_process_cq+0x97/0x100 [ib_core] ib_cq_poll_work+0x31/0xb0 [ib_core] process_one_work+0x4ee/0xa00 ? pwq_dec_nr_in_flight+0x110/0x110 ? do_raw_spin_lock+0x113/0x1d0 worker_thread+0x57/0x5a0 ? process_one_work+0xa00/0xa00 kthread+0x1bb/0x1e0 ? kthread_create_on_node+0xc0/0xc0 ret_from_fork+0x3a/0x50 The buggy address belongs to the page: page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame: pma_get_opa_portstatus+0x0/0xa80 [hfi1] this frame has 1 object: [32, 36) 'vl_select_mask' Memory state around the buggy address: ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00 ^ ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 ================================================================== Cc: <stable@vger.kernel.org> Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/{rdmavt, hfi1, qib}: Add a counter for credit waitsKaike Wan
This patch adds a counter for credit waits to assist field debugging. Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/hfi1: Add traces for TID RDMA READKaike Wan
This patch adds traces to debug packet loss and retry for TID RDMA READ protocol. Link: https://lore.kernel.org/r/20190911113041.126040.64541.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Relax from kmap_atomic() use in TX pathBernard Metzler
Since the transmit path is never executed in an atomic context, we do not need kmap_atomic() and can always use less demanding kmap(). Link: https://lore.kernel.org/r/20190909132945.30462-1-bmt@zurich.ibm.com Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge tag 'v5.3-rc8' into rdma.git for-nextJason Gunthorpe
To resolve dependencies in following patches mlx5_ib.h conflict resolved by keeing both hunks Linux 5.3-rc8 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/iser: Support up to 16MB data transfer in a single commandSergey Gorenko
Maximum supported IO size is 8MB for the iSER driver. The current value is limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able to handle 16MB IOs without any significant changes. Increasing this limit can be useful for the storage arrays which are fine tuned for IOs larger than 8 MB. This commit allows to configure maximum IO size up to 16MB using the max_sectors module parameter. Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Fix page address mapping in TX pathBernard Metzler
Use the correct kmap()/kunmap() flow to determine page address used for CRC computation. Using page_address() is wrong, since page might be in highmem. Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Link: https://lore.kernel.org/r/20190909132427.30264-1-bmt@zurich.ibm.com Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA: Fix goto target to release the allocated memoryNavid Emamdoost
In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory should be released by goto fail. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/usnic: Avoid overly large buffers on stackArnd Bergmann
It's never a good idea to put a 1000-byte buffer on the kernel stack. The compiler warns about this instance when usnic_ib_log_vf() gets inlined into usnic_ib_pci_probe(): drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=] As this is only called for debugging purposes in the setup path, it's trivial to convert to a dynamic allocation. Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/odp: Add missing cast for 32 bitJason Gunthorpe
length is a size_t which is unsigned int on 32 bit: ../drivers/infiniband/core/umem_odp.c: In function 'ib_init_umem_odp': ../include/linux/overflow.h:59:15: warning: comparison of distinct pointer types lacks a cast 59 | (void) (&__a == &__b); \ | ^~ ../drivers/infiniband/core/umem_odp.c:220:7: note: in expansion of macro 'check_add_overflow' Fixes: 204e3e5630c5 ("RDMA/odp: Check for overflow when computing the umem_odp end") Link: https://lore.kernel.org/r/20190908080726.30017-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/hns: Use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/cma: Fix false error messageHåkon Bugge
In addr_handler(), assuming status == 0 and the device already has been acquired (id_priv->cma_dev != NULL), we get the following incorrect "error" message: RDMA CM: ADDR_ERROR: failed to resolve IP. status 0 Fixes: 498683c6a7ee ("IB/cma: Add debug messages to error flows") Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.4. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom, enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
2019-09-13rtw88: report RX power for each antennaYan-Hsuan Chuang
Report chains and chain_signal in ieee80211_rx_status. It is useful for program such as tcpdump to see if the antennas are well connected/placed. 8822C is able to receive CCK rates with 2 antennas, while 8822B can only use 1 antenna path to receive CCK rates. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: fix wrong rx power calculationTsang-Shian Lin
Fix the wrong RF path for CCK rx power calculation. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92d_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92d_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: allows to receive AMSDU in AMPDUYan-Hsuan Chuang
The hardware has enough buffer to receive like 8K for an MPDU. So tell mac80211 that we can receive AMSDU in AMPDU. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: add dynamic cck pd mechanismTzu-En Huang
This mechanism reduces the numbers of false alram in cck rate by dynamically adjusting the value of power threshold and cs_ratio. We determine the new value by three factors, which are rssi, false alarm count and igi. Based on these factors, we define the current condition into five levels. Compared to the previous level, if the level is changed, we set the new values for power threshold and cs_ratio. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: move IQK/DPK into phy_calibrationYan-Hsuan Chuang
Since 8822c requires to do not only IQK, but also DPK. Move these calibrations that need to be done once the channel is determined, into phy_calibration. And note that the order of the calibrations matters, 8822c should do IQK first, then DPK. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add SW DPK supportTzu-En Huang
Power amplifiers are not linear components, and require DPK to reduce its nonlinearity. DPK is called Digital Pre-distortion Calibration, can be used to compensate the output of power. DPK tracking is in charge of tracking the thermal changes. And it then shifts the power curve accordingly, which makes the power output remains linear even if the PA works in different temperature. To perform DPK, the parameter table should also be updated. And the table will be applied when device is powered on. Then DPK will reference the values to calibrate. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add FW IQK supportYan-Hsuan Chuang
Add support for doing IQK in firmware Ideally the RF component's I/Q vectors should be orthogonal, but usually they are not. So we need to calibrate for the RF components, ex. PA/LNA, ADC/DAC. And if the I/Q vectors are more orthogonal, the mixed signal will have less deviation. This helps with those rates with higher modulation (MCS8-9), because they have more strict EVM/SNR requirement. Also the better of the quality of the signal, the longer it can propagate, and the better throughput performance we can get. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: Enable interrupt migrationTsang-Shian Lin
Enable 8822C Tx/Rx interrupt migration. In some platforms, performance test may cause heavy cpu loading and get bad results. Interrupt migration can decrease the amount of interrupts, and lower cpu loading. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update pwr_seq to v13Chin-Yen Lee
update sequence to v13 to reduce power consumption when MAC power off Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update PHY parameter to v38Yan-Hsuan Chuang
Update PHY hardware parameters to v38. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some ↵Larry Finger
unused bit manipulation macros Each of these drivers defines some device to host macros that are never used, thus they can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macrosLarry Finger
iAs the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl reports lines too long are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Remove unused GET_XXX and SET_XXX macrosLarry Finger
As the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13dm bufio: remove old-style buffer cleanupMikulas Patocka
Remove code that cleans up buffers if the cache size grows over the limit. The next commit will introduce a new global cleanup. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-13dm bufio: introduce a global queueMikulas Patocka
Rename param_spinlock to global_spinlock and introduce a global queue of all used buffers. The queue will be used in the following commits. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-13dm bufio: refactor adjust_total_allocatedMikulas Patocka
Refactor adjust_total_allocated() so that it takes a bool argument indicating if it should add or subtract the buffer size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-13dm bufio: call adjust_total_allocated from __link_buffer and __unlink_bufferMikulas Patocka
Move the call to adjust_total_allocated() to __link_buffer() and __unlink_buffer() so that only used buffers are counted. Reserved buffers are not. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-13libertas: use mesh_wdev->ssid instead of priv->mesh_ssidLubomir Rintel
With the commit e86dc1ca4676 ("Libertas: cfg80211 support") we've lost the ability to actually set the Mesh SSID from userspace. NL80211_CMD_SET_INTERFACE with NL80211_ATTR_MESH_ID sets the mesh point interface's ssid field. Let's use that one for the Libertas Mesh operation Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13ssb: make array pwr_info_offset static const, makes object smallerColin Ian King
Don't populate the array pwr_info_offset on the stack but instead make it static const. Makes the object code smaller by 207 bytes. Before: text data bss dec hex filename 26066 3000 64 29130 71ca drivers/ssb/pci.o After: text data bss dec hex filename 25763 3096 64 28923 70fb drivers/ssb/pci.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Michael Büsch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13i2c: tegra: Move suspend handling to NOIRQ phaseJon Hunter
Commit acc8abcb2a9c ("i2c: tegra: Add suspend-resume support") added suspend support for the Tegra I2C driver and following this change on Tegra30 the following WARNING is seen on entering suspend ... WARNING: CPU: 2 PID: 689 at /dvs/git/dirty/git-master_l4t-upstream/kernel/drivers/i2c/i2c-core.h:54 __i2c_transfer+0x35c/0x70c i2c i2c-4: Transfer while suspended Modules linked in: brcmfmac brcmutil CPU: 2 PID: 689 Comm: rtcwake Not tainted 5.3.0-rc7-g089cf7f6ecb2 #1 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [<c0112264>] (unwind_backtrace) from [<c010ca94>] (show_stack+0x10/0x14) [<c010ca94>] (show_stack) from [<c0a77024>] (dump_stack+0xb4/0xc8) [<c0a77024>] (dump_stack) from [<c0124198>] (__warn+0xe0/0xf8) [<c0124198>] (__warn) from [<c01241f8>] (warn_slowpath_fmt+0x48/0x6c) [<c01241f8>] (warn_slowpath_fmt) from [<c06f6c40>] (__i2c_transfer+0x35c/0x70c) [<c06f6c40>] (__i2c_transfer) from [<c06f7048>] (i2c_transfer+0x58/0xf4) [<c06f7048>] (i2c_transfer) from [<c06f7130>] (i2c_transfer_buffer_flags+0x4c/0x70) [<c06f7130>] (i2c_transfer_buffer_flags) from [<c05bee78>] (regmap_i2c_write+0x14/0x30) [<c05bee78>] (regmap_i2c_write) from [<c05b9cac>] (_regmap_raw_write_impl+0x35c/0x868) [<c05b9cac>] (_regmap_raw_write_impl) from [<c05b984c>] (_regmap_update_bits+0xe4/0xec) [<c05b984c>] (_regmap_update_bits) from [<c05bad04>] (regmap_update_bits_base+0x50/0x74) [<c05bad04>] (regmap_update_bits_base) from [<c04d453c>] (regulator_disable_regmap+0x44/0x54) [<c04d453c>] (regulator_disable_regmap) from [<c04cf9d4>] (_regulator_do_disable+0xf8/0x268) [<c04cf9d4>] (_regulator_do_disable) from [<c04d1694>] (_regulator_disable+0xf4/0x19c) [<c04d1694>] (_regulator_disable) from [<c04d1770>] (regulator_disable+0x34/0x64) [<c04d1770>] (regulator_disable) from [<c04d2310>] (regulator_bulk_disable+0x28/0xb4) [<c04d2310>] (regulator_bulk_disable) from [<c0495cd4>] (tegra_pcie_power_off+0x64/0xa8) [<c0495cd4>] (tegra_pcie_power_off) from [<c0495f74>] (tegra_pcie_pm_suspend+0x25c/0x3f4) [<c0495f74>] (tegra_pcie_pm_suspend) from [<c05af48c>] (dpm_run_callback+0x38/0x1d4) [<c05af48c>] (dpm_run_callback) from [<c05afe30>] (__device_suspend_noirq+0xc0/0x2b8) [<c05afe30>] (__device_suspend_noirq) from [<c05b1c24>] (dpm_noirq_suspend_devices+0x100/0x37c) [<c05b1c24>] (dpm_noirq_suspend_devices) from [<c05b1ebc>] (dpm_suspend_noirq+0x1c/0x48) [<c05b1ebc>] (dpm_suspend_noirq) from [<c017d2c0>] (suspend_devices_and_enter+0x1d0/0xa00) [<c017d2c0>] (suspend_devices_and_enter) from [<c017dd10>] (pm_suspend+0x220/0x74c) [<c017dd10>] (pm_suspend) from [<c017c2c8>] (state_store+0x6c/0xc8) [<c017c2c8>] (state_store) from [<c02ef398>] (kernfs_fop_write+0xe8/0x1c4) [<c02ef398>] (kernfs_fop_write) from [<c0271e38>] (__vfs_write+0x2c/0x1c4) [<c0271e38>] (__vfs_write) from [<c02748dc>] (vfs_write+0xa4/0x184) [<c02748dc>] (vfs_write) from [<c0274b7c>] (ksys_write+0x9c/0xdc) [<c0274b7c>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xe9f21fa8 to 0xe9f21ff0) 1fa0: 0000006c 004b2438 00000004 004b2438 00000004 00000000 1fc0: 0000006c 004b2438 004b1228 00000004 00000004 00000004 0049e78c 004b1228 1fe0: 00000004 be9809b8 b6f0bc0b b6e96206 The problem is that the Tegra PCIe driver indirectly uses I2C for controlling some regulators and the I2C driver is now being suspended before the PCIe driver causing the PCIe suspend to fail. The Tegra PCIe driver is suspended during the NOIRQ phase and this cannot be changed due to other dependencies. Therefore, we also need to move the suspend handling for the Tegra I2C driver to the NOIRQ phase as well. In order to move the I2C suspend handling to the NOIRQ phase we also need to avoid calling pm_runtime_get/put() because per commit 1e2ef05bb8cf ("PM: Limit race conditions between runtime PM and system sleep (v2)") these cannot be called early in resume. The function tegra_i2c_init(), called during resume, calls pm_runtime_get/put() and so move these calls outside of tegra_i2c_init(), so this function can be used during the NOIRQ resume phase. Fixes: acc8abcb2a9c ("i2c: tegra: Add suspend-resume support") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-13i2c: imx: ACPI support for NXP i2c controllerChuanhua Han
Enable NXP i2c controller to boot with ACPI. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Udit Kumar <udit.kumar@nxp.com> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-13PTP: introduce new versions of IOCTLsFelipe Balbi
The current version of the IOCTL have a small problem which prevents us from extending the API by making use of reserved fields. In these new IOCTLs, we are now making sure that flags and rsv fields are zero which will allow us to extend the API in the future. Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 20:05:01 +0000