| Age | Commit message (Collapse) | Author |
|---|
|
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.
Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As such it should be called inside the scsi_device_supports_vpd()
conditional.
Link: https://lore.kernel.org/r/20220302053559.32147-13-martin.petersen@oracle.com
Fixes: e815d36548f0 ("scsi: sd: add concurrent positioning ranges support")
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As part of controller reset operation the driver issues a config request
command. If this command gets times out, then fail the controller reset
operation instead of retrying it.
Link: https://lore.kernel.org/r/20220405120637.20528-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are needed so move those to private command data.
Link: https://lore.kernel.org/r/accf71e293ba3aed6d18c8baeb405de8dfe7c935.1649235939.git.fthain@linux-m68k.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add PCI ID and callbacks to support Intel Meteor Lake (MTL).
Link: https://lore.kernel.org/r/20220404055038.2208051-1-adrian.hunter@intel.com
Cc: stable@vger.kernel.org # v5.15+
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The start_addres argument of mpt3sas_check_same_4gb_region() was misnamed
in the function kdoc comment, resulting in the following warning when
compiling with W=1.
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Function parameter or
member 'start_address' not described in 'mpt3sas_check_same_4gb_region'
drivers/scsi/mpt3sas/mpt3sas_base.c:5728: warning: Excess function
parameter 'reply_pool_start_address' description in
'mpt3sas_check_same_4gb_region'
Fix the argument name in the function kdoc comment to avoid it. While at
it, remove a useless blank line between the kdoc and function code.
Link: https://lore.kernel.org/r/20220404050041.594774-1-damien.lemoal@opensource.wdc.com
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The in_use_bm bitmap of struct sdebug_queue should be accessed under
protection of the qc_lock spinlock. Make sure that this lock is taken
before calling find_first_bit() at the beginning of the function
sdebug_blk_mq_poll().
Link: https://lore.kernel.org/r/20220404045547.579887-1-damien.lemoal@opensource.wdc.com
Fixes: 3fd07aecb750 ("scsi: scsi_debug: Fix qc_lock use in sdebug_blk_mq_poll()")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull the remaining commits from 5.18/scsi-queue into fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-04-06:
amdgpu:
- VCN 3.0 fixes
- DCN 3.1.5 fix
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix
amdkfd:
- Event fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406170441.5779-1-alexander.deucher@amd.com
|
|
into drm-fixes
drm/imx: error handling and debug output fixes
Catch an EDID allocation failure in imx-ldb, fix a leaked drm display
mode on DT parsing error in parallel-display, properly remove the
dw_hdmi bridge in case the component_add fails in dw_hdmi-imx, and
fix the IPU clock frequency debug printout in ipu-di.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406155101.1271845-1-p.zabel@pengutronix.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/panel/ili9341: Fix optional regulator handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjwkvPp6UnePy4Q8@linux-uq9g.fritz.box
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-next-5.18-2022-03-25:
amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes
amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325183602.5718-1-alexander.deucher@amd.com
|
|
In 1448769c9cdb ("random: check for signal_pending() outside of
need_resched() check"), Jann pointed out that we previously were only
checking the TIF_NOTIFY_SIGNAL and TIF_SIGPENDING flags if the process
had TIF_NEED_RESCHED set, which meant in practice, super long reads to
/dev/[u]random would delay signal handling by a long time. I tried this
using the below program, and indeed I wasn't able to interrupt a
/dev/urandom read until after several megabytes had been read. The bug
he fixed has always been there, and so code that reads from /dev/urandom
without checking the return value of read() has mostly worked for a long
time, for most sizes, not just for <= 256.
Maybe it makes sense to keep that code working. The reason it was so
small prior, ignoring the fact that it didn't work anyway, was likely
because /dev/random used to block, and that could happen for pretty
large lengths of time while entropy was gathered. But now, it's just a
chacha20 call, which is extremely fast and is just operating on pure
data, without having to wait for some external event. In that sense,
/dev/[u]random is a lot more like /dev/zero.
Taking a page out of /dev/zero's read_zero() function, it always returns
at least one chunk, and then checks for signals after each chunk. Chunk
sizes there are of length PAGE_SIZE. Let's just copy the same thing for
/dev/[u]random, and check for signals and cond_resched() for every
PAGE_SIZE amount of data. This makes the behavior more consistent with
expectations, and should mitigate the impact of Jann's fix for the
age-old signal check bug.
---- test program ----
#include <unistd.h>
#include <signal.h>
#include <stdio.h>
#include <sys/random.h>
static unsigned char x[~0U];
static void handle(int) { }
int main(int argc, char *argv[])
{
pid_t pid = getpid(), child;
signal(SIGUSR1, handle);
if (!(child = fork())) {
for (;;)
kill(pid, SIGUSR1);
}
pause();
printf("interrupted after reading %zd bytes\n", getrandom(x, sizeof(x), 0));
kill(child, SIGTERM);
return 0;
}
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Since gen6 we use FPGA_DBG register to detect unclaimed MMIO registers.
This register is in the display engine IP and can only ever detect
unclaimed accesses to registers in this area. However sometimes there
are reports of this triggering for registers in other areas, which
should not be possible.
Right now we always warn after the read/write of registers going through
unclaimed_reg_debug(). However places using __raw_uncore_* may be
triggering the unclaimed access and those being later accounted to a
different register. Let's warn both before and after the read/write
with a slightly different message, so it's clear if the register
reported in the warning is actually the culprit.
Commit dda960335e02 ("drm/i915: Just clear the mmiodebug before a
register access") attempted to solve the same issue by removing the
warning when if FPGA_DBG flags before the mmio read/write. However, it
doesn't solve it completely as FPGA_DBG may remain set when reading
registers outside display. So in the end the check after the mmio
read/write triggers the warning pointing to the wrong register.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405001149.2675226-1-lucas.demarchi@intel.com
|
|
OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.
BUG: Kernel NULL pointer dereference on read at 0x00000060
Faulting instruction address: 0xc00000000080dfa4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
[...]
CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f9365 #1
NIP: c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
REGS: c000000004132fe0 TRAP: 0300 Not tainted (5.17.0-ae085d7f9365)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28228282 XER: 20000000
CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
[c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
[c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
[c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
[c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
[c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
[...]
[c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
[c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250
The bug [1] was introduced by commit 27599aacbaef ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.
Tested with 5.17 on qemu ppc64le emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org # v5.11+
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de
|
|
We want our pages not to change while they are being written.
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bug is here:
idr_remove(&connection->peer_devices, vnr);
If the previous for_each_connection() don't exit early (no goto hit
inside the loop), the iterator 'connection' after the loop will be a
bogus pointer to an invalid structure object containing the HEAD
(&resource->connections). As a result, the use of 'connection' above
will lead to a invalid memory access (including a possible invalid free
as idr_remove could call free_layer).
The original intention should have been to remove all peer_devices,
but the following lines have already done the work. So just remove
this line and the unneeded label, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: c06ece6ba6f1b ("drbd: Turn connection->volumes into connection->peer_devices")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.
What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.
My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.
v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/
Fixes: a29728463b254 ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Accessing the DDI_BUF_CTL register without the port's DDI clock being
enabled (to set/clear the TypeC PHY ownership for the port) can lead to
a corrupted value read during any i915 register access right after the
DDI clock is enabled.
The root cause is the way clock synchronization works for this register,
controlled by the CHICKEN_DCPR_1 DDI_CLOCK_REG_ACCESS flag. Correctly
this flag should be cleared on ADLP (see the Bspec link below), however
after bootup the flag is set.
One easily reproducible issue is an unclaimed register access of the
PWR_WELL_CTL_DDI2 register, programmed right after DDI clock enabling to
enable the port's DDI_IO power well (see the HSDES, VLK links below).
With the correct setting above this problem can't be reproduced.
Bspec: 49189
HSDES: 18019028154
VLK: 28328, 28655
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Arthur J Runyan <arthur.j.runyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323201749.288566-1-imre.deak@intel.com
|
|
SMU takes clock limits in Mhz units. socclk and fclk were
using 10 khz units in some cases. Switch to Mhz units.
Fixes higher than required SoC clocks.
Fixes: 97cf32996c46d9 ("drm/amd/pm: Removed fixed clock in auto mode DPM")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why & How]
Make dcn315 base its clock table off dcfclk rather than fclk.
This change also adds some sanity checking to make sure an
empty pmfw table does not result in invalid dal clocks.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes crash on MST Hub disconnect.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Work around to try to wake unresponsive DP sinks may need to be adjusted
for certain sinks.
[How]
Add options to disable work around or adjust time spent trying to wake
unresponsive DPRX.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove assert that will hit during odm transition case,
since this is a valid case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Seems to cause a reboots or hangs on some systems.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953
Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[ 100.869106] Call Trace:
[ 100.871555] <TASK>
[ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20
[ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163
[ 100.899874] ? __sprint_symbol+0x80/0x135
[ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2
[ 100.908500] ? symbol_string+0xb7/0xde
[ 100.912250] ? number+0x145/0x29b
[ 100.915566] ? vsnprintf+0x341/0x5ff
[ 100.919141] ? desc_read_finalized_seq+0x39/0x87
[ 100.923755] ? update_load_avg+0x1b9/0x607
[ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c
[ 100.937686] ? dc_fpu_end+0x3d/0xa8
[ 100.941175] dml_get_voltage_level+0x16b/0x180
[ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b
[ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c
[ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc
[ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc
[ 100.970001] dc_validate_global_state+0x238/0x295
[ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce
[ 100.979235] ? _printk+0x59/0x73
[ 100.982467] drm_atomic_check_only+0x403/0x78b
[ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546
[ 100.991358] ? drm_ioctl+0x1c1/0x3b3
[ 100.994936] ? drm_atomic_set_property+0x92a/0x92a
[ 100.999725] drm_ioctl_kernel+0xdc/0x149
[ 101.003648] drm_ioctl+0x27f/0x3b3
[ 101.007051] ? drm_atomic_set_property+0x92a/0x92a
[ 101.011842] amdgpu_drm_ioctl+0x49/0x7d
[ 101.015679] __se_sys_ioctl+0x7c/0xb8
[ 101.015685] do_syscall_64+0x5f/0xb8
[ 101.015690] ? __irq_exit_rcu+0x34/0x96
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Sync up header and implementation to use the same parameter names
in function amdgpu_ring_init.
ring_size -> max_dw, prio -> hw_prio
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL
Acked-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:
"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"
[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Split i915_run_as_guest() into a more arch-friendly function
as non-x86 builds do not support this functionality.
Signed-off-by: Casey Bowman <casey.g.bowman@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331204343.1256150-2-casey.g.bowman@intel.com
|
|
invalidations
Instead of exit PSR when a frontbuffer invalidation happens, we can
enable the PSR2 selective fetch continuous full frame, that will keep
the panel updated like PSR was disabled but without keeping PSR active.
So as soon as the frontbuffer flush happens we can disable the
continuous full frame and start to do selective fetches much quicker
than the path that would enable PSR, that will wait a few frames
to actually activate PSR.
Also this approach has proven to fix some glitches found in Alderlake-P
when there are a lot of invalidations happening together with page
flips.
Some may ask why it is writing to CURSURFLIVE(), it is because
that is the way that hardware team provided us to poke display to
handle PSR updates, and it is being used since display 9.
v2:
- handling possible race conditions between frontbuffer rendering and
page flips
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-3-jose.souza@intel.com
|
|
Frontbuffer rendering and page flips can race with each other
and this can potentialy cause issues with PSR2 selective fetch.
And because pipe/crtc updates are time sentive we can't grab the
PSR lock after intel_pipe_update_start() and before
intel_pipe_update_end().
So here adding the lock and unlock functions and calls, the
proper PSR2 selective fetch handling will come in a separated patch.
v2:
- fixed new functions documentation
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-2-jose.souza@intel.com
|
|
Following up what was done in commit 804f46885317 ("drm/i915/psr: Set
"SF Partial Frame Enable" also on full update") and also setting
partial frame enable when psr_force_hw_tracking_exit() is called.
Also as PSR2_MAN_TRK_CTL is a double buffered registers do a RMW
is not a good idea so here also setting the man_trk_ctl_enable_bit()
that is required in TGL and only doing a register write.
v2:
- not doing a rmw
v3:
- removing the inline from functions that return PSR2_MAN_TRK_CTL
bits
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405155344.47219-1-jose.souza@intel.com
|
|
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
why and how:
causes failure on install on certain machines
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When waking from low-power states, a DP sink may remain unresponsive to
AUX transactions.
[How]
Try to toggle DPCD SET_POWER register repeatedly (up to a maximum
timeout value) until DP sink becomes responsive.
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
when disable optc, need to clear the underflow status as well.
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x
[How]
Remove DSC power down code from dcn10_init_hw()
Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP")
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Audit all the users of dma_resv_add_excl_fence() and make sure they
reserve a shared slot also when only trying to add an exclusive fence.
This is the next step towards handling the exclusive fence like a
shared one.
v2: fix missed case in amdgpu
v3: and two more radeon, rename function
v4: add one more case to TTM, fix i915 after rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406075132.3263-2-christian.koenig@amd.com
|
|
[Why]
Once DSC slice cannot fit pixel clock, we incorrectly
reset min slices to 0 and allow max slice to operate,
even when max slice itself cannot fit the pixel clock
properly.
[How]
Change the sequence such that we correctly determine
DSC is not possible when both min slices and max
slices cannot fit pixel clock per slice.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some video card has more than one vcn instance, passing 0 to
vcn_v3_0_pause_dpg_mode is incorrect.
Error msg:
Register(1) [mmUVD_POWER_STATUS] failed to reach value
0x00000001 != 0x00000002
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
For VCN FW to detect ASIC type, in order to use different mailbox registers.
V2: simplify codes and fix format issue.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Acked-by Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes case where MSPI controller is used to access spi-nor
flash and BSPI block is not present.
Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220328142442.7553-1-kdasu.kdev@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cqspi_set_protocol() only set the data width, but ignored the command
and address width (except for 8-8-8 DTR ops), leading to corruption of
all transfers using 1-X-X or X-X-X ops. Fix by setting the other two
widths as well.
While we're at it, simplify the code a bit by replacing the
CQSPI_INST_TYPE_* constants with ilog2().
Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4
read and write operations.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220331110819.133392-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit b470e10eb43f ("spi: core: add dma_map_dev for dma device") added
dma_map_dev for _spi_map_msg() but missed to add for unmap routine,
__spi_unmap_msg(), so add it now.
Fixes: b470e10eb43f ("spi: core: add dma_map_dev for dma device")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220406132238.1029249-1-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clang static analyzer reports the following warning,
File: drivers/cdrom/cdrom.c
Warning: line 1380, column 7
Although the value stored to 'status' is used in enclosing
expression, the value is never actually read from 'status'
Remove the unused variable to eliminate the warning.
Signed-off-by: Enze Li <lienze@kylinos.cn>
Link: https://lore.kernel.org/all/20220401032623.293666-1-lienze@kylinos.cn
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220401211842.2088096-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All remaining skbs should be released when myri10ge_xmit fails to
transmit a packet. Fix it within another skb_list_walk_safe.
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aqc111_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:
- The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds,
causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
endianness flip to corrupt data used by a cloned SKB that has already
been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
causing out-of-bounds heap data to be considered part of the SKB's
data.
Found doing variant analysis. Tested it with another driver (ax88179_178a), since
I don't have a aqc111 device to test it, but the code looks very similar.
Signed-off-by: Marcin Kozlowski <marcinguy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
