| Age | Commit message (Collapse) | Author |
|---|
|
As it turns out, these laptops have 2 thermal profile versions.
A previous patch added support for v0, this patch adds support
for v1 thermal policies that are in use on some devices.
We obtain the thermal policy version by querying the get system
design data WMI call and looking at the fourth byte it returns,
except if the system board DMI Board ID is in a specific array
that the windows command center app overrides to thermal policy
v0 for some reason.
Signed-off-by: Enver Balalic <balalic.enver@gmail.com>
Link: https://lore.kernel.org/r/20220314121453.kjszdciymtg6ctbq@omen
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The purpose of this patch is to remove 128 bytes buffer limitation
imposed in bios_args structure.
A limiting factor discovered during this investigation was the struct
bios_args.data size restriction. The data member size limits all
possible WMI commands to those requiring buffer size of 128 bytes or
less. Several WMI commands and queries require a buffer size larger
than 128 bytes hence limiting current and feature supported by the
driver. It is for this reason, struct bios_args.data changed and is
dynamically allocated. hp_wmi_perform_query function changed to
handle the memory allocation and release of any required buffer size.
All changes were validated on a HP ZBook Workstation notebook,
HP EliteBook x360, and HP EliteBook 850 G8. Additional
validation was included in the test process to ensure no other
commands were incorrectly handled.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/20220310210853.28367-5-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Revert commit 626851e9225d ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.
Fixes: 626851e9225d ("nvmet: make discovery NQN configurable")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvmet_ns_changed states via lockdep that the ns->subsys->lock must be
held. The only caller of nvmet_ns_changed which does not acquire that
lock is nvmet_ns_revalidate. nvmet_ns_revalidate has 3 callers,
of which 2 do not acquire that lock: nvmet_execute_identify_cns_cs_ns
and nvmet_execute_identify_ns. The other caller
nvmet_ns_revalidate_size_store does acquire the lock.
Move the call to nvmet_ns_changed from nvmet_ns_revalidate to the callers
so that they can perform the correct locking as needed.
This issue was found using a static type-based analyser and manually
verified.
Reported-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
The wrappers are gone for two years now but they have still pointers
reserved in the tmio_mmc_host struct. Remove them.
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: f22084b662e5 ("mmc: tmio: remove superfluous callback wrappers")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220311140542.5407-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The driver prints the following log everytime data is written to RPMB:
mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10]
dev_info is used to print that log but it seems that log is only
useful for debbuging. Use dev_dbg instead of dev_info.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220311103320.3072171-1-abailon@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220308071415.1093393-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add runtime PM for GL9763E and disable PLL in runtime suspend. So power
gated of upstream port can be enabled. GL9763E has an auxiliary power
so it keep states in runtime suspend. In runtime resume, PLL is enabled
and waits for it to stabilize.
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Kevin Chang <kevin.chang@lcfuturecenter.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220307090009.1386876-1-benchuanggli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When mmc_select_hs400es() tries to switch to the HS400 ES mode, it may bail
out early if the host doesn't support an 8-bit buswidth, as it's required
for the HS400 mode.
To improve the situation, let's instead drop the HS400 bits from the
capability field if the 8-bit bus isn't supported. In this way, we allow
the mmc initialization to continue by trying a lower speed mode.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220303165151.129806-1-ulf.hansson@linaro.org
|
|
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org
|
|
In the error path of mmc_select_hs200() we are trying our best to restore
the card/host into a valid state. This makes sense, especially if we
encounter a simple switch error (-EBADMSG). However, rather than then
continue with using the legacy speed mode, let's try the other better speed
modes first. Additionally, let's update the card->mmc_avail_type to avoid
us from trying a broken HS200 mode again.
In an Amlogic S905W based TV box where the switch to HS200 mode fails for
the eMMC, this allows us to use the eMMC in DDR mode in favor of the legacy
mode, which greatly improves the performance.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20220303164522.129583-1-ulf.hansson@linaro.org
|
|
In order to better organize the platform/Kconfig, place
s3c-camif-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
rga-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
venus-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
camss-specific config stuff on a separate Kconfig file.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
omap3isp-specific config stuff on a separate Kconfig file.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
mtk-vpu-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
mtk-vcodec-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
mtk-mdp-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
mtk-jpeg-specific config stuff on a separate Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to better organize the platform/Kconfig, place
ge2d-specific config stuff on a separate Kconfig file.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 3.833521] debugfs: Directory 'e200413c.mdio' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes: a27a76282837 ("net: mdio: mscc-miim: convert to a regmap implementation")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220312224140.4173930-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use kcalloc() instead of kmalloc() + memset().
Link: https://lore.kernel.org/r/20220313141847.109804-1-Julia.Lawall@inria.fr
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Various spelling mistakes in comments. Detected with the help of
Coccinelle.
Link: https://lore.kernel.org/r/20220314115354.144023-26-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Various spelling mistakes in comments. Detected with the help of
Coccinelle.
Link: https://lore.kernel.org/r/20220314115354.144023-25-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Various spelling mistakes in comments. Detected with the help of
Coccinelle.
Link: https://lore.kernel.org/r/20220314115354.144023-18-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Various spelling mistakes in comments. Detected with the help of
Coccinelle.
Link: https://lore.kernel.org/r/20220314115354.144023-3-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20220310092604.22950-14-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Increase max limit of ql2xnvme_queues to (max_qpair - 1).
Link: https://lore.kernel.org/r/20220310092604.22950-13-njavali@marvell.com
Fixes: 65120de26a54 ("scsi: qla2xxx: Add ql2xnvme_queues module param to configure number of NVMe queues")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com
Fixes: e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove stale recovery code that prevents normal path recovery.
Link: https://lore.kernel.org/r/20220310092604.22950-11-njavali@marvell.com
Fixes: 1cbc0efcd9be ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com
Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For session recovery, driver relies on the dpc thread to initiate certain
operations. The dpc thread runs exclusively without the Mailbox interface
being occupied. A recent code change for heartbeat check via mailbox cmd 0
is preventing the dpc thread from carrying out its operation. This patch
allows the higher priority error recovery to run first before running the
lower priority heartbeat check.
Link: https://lore.kernel.org/r/20220310092604.22950-9-njavali@marvell.com
Fixes: d94d8158e184 ("scsi: qla2xxx: Add heartbeat check")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com
Fixes: c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During purex packet handling the driver was incorrectly freeing a
pre-allocated structure. Fix this by skipping that entry.
System crashed with the following stack during a module unload test.
Call Trace:
sbitmap_init_node+0x7f/0x1e0
sbitmap_queue_init_node+0x24/0x150
blk_mq_init_bitmaps+0x3d/0xa0
blk_mq_init_tags+0x68/0x90
blk_mq_alloc_map_and_rqs+0x44/0x120
blk_mq_alloc_set_map_and_rqs+0x63/0x150
blk_mq_alloc_tag_set+0x11b/0x230
scsi_add_host_with_dma.cold+0x3f/0x245
qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx]
Call Trace with slub_debug and debug kernel:
kasan_report_invalid_free+0x50/0x80
__kasan_slab_free+0x137/0x150
slab_free_freelist_hook+0xc6/0x190
kfree+0xe8/0x2e0
qla2x00_free_device+0x3bb/0x5d0 [qla2xxx]
qla2x00_remove_one+0x668/0xcf0 [qla2xxx]
Link: https://lore.kernel.org/r/20220310092604.22950-6-njavali@marvell.com
Fixes: 62e9dd177732 ("scsi: qla2xxx: Change in PUREX to handle FPIN ELS requests")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
At NVMe ELS request time, request structure is DMA mapped and never
unmapped. Fix this by calling the unmap on ELS completion.
Link: https://lore.kernel.org/r/20220310092604.22950-5-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Driver registration of localport can race when it happens at the remote
port discovery time. Fix this by calling the registration under a mutex.
Link: https://lore.kernel.org/r/20220310092604.22950-4-njavali@marvell.com
Fixes: e84067d74301 ("scsi: qla2xxx: Add FC-NVMe F/W initialization and transport registration")
Cc: stable@vger.kernel.org
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
Link: https://lore.kernel.org/r/20220310092604.22950-2-njavali@marvell.com
Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 1b8d0300a3e9 ("scsi: libiscsi: Fix UAF in
iscsi_conn_get_param()/iscsi_conn_teardown()") fixed an UAF in
iscsi_conn_get_param() and introduced 2 tmp_xxx varibles.
We can gracefully fix this UAF with the help of device_del(). Calling
iscsi_remove_conn() at the beginning of iscsi_conn_teardown would make
userspace unable to see iscsi_cls_conn. This way we we can free memory
safely.
Remove iscsi_destroy_conn() since it is no longer used.
Link: https://lore.kernel.org/r/20220310015759.3296841-4-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsi_create_conn() exposed iscsi_cls_conn to sysfs prior to initialization
of iscsi_conn's dd_data. When userspace tried to access an attribute such
as the connect address, a NULL pointer dereference was observed.
Do not add iscsi_cls_conn to sysfs until it has been initialized. Remove
iscsi_create_conn() since it is no longer used.
Link: https://lore.kernel.org/r/20220310015759.3296841-3-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
- iscsi_alloc_conn(): Allocate and initialize iscsi_cls_conn
- iscsi_add_conn(): Expose iscsi_cls_conn to userspace via sysfs
- iscsi_remove_conn(): Remove iscsi_cls_conn from sysfs
Link: https://lore.kernel.org/r/20220310015759.3296841-2-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If HID_GROUP of eel is set to HID_GROUP_GENERIC, Whiskers Tablet Mode
Switch of eel hammer will not be detected by system because the
hid-vivaldi driver probes the device. When it is set to
HID_GROUP_VIVALDI, system will detect Whiskers Tablet Mode Switch
successfully and also support the vivaldi keyboard layout.
Tested-by: "Sean O'Brien" <seobrien@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
[swboyd@chromium.org: Expand on commit text]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support to the hammer driver to parse vivaldi keyboard layouts and
expose them to userspace. This allows hammer devices to use vivaldi
function row keys while also supporting the other features this driver
supports, like the CBAS (chrome base attached switch) and a keyboard
backlight.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We need to support parsing the HID device in both the Vivaldi and the
Hammer drivers so that we can properly expose the function row physmap
to userspace when a hammer device uses a vivaldi keyboard layout for the
function row keys. Extract the feature mapping logic from the vivaldi
driver into an hid specific vivaldi library so we can use it from both
HID drivers.
To allow more code sharing we mandate that vivaldi data must be placed
at the very beginning of the driver data attached to the HID device
instance.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Let's introduce a common library file for the physmap show function
duplicated between three different keyboard drivers. This largely copies
the code from cros_ec_keyb.c which has the most recent version of the
show function, while using the vivaldi_data struct from the hid-vivaldi
driver. This saves a small amount of space in an allyesconfig build.
$ ./scripts/bloat-o-meter vmlinux.before vmlinux.after
add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308)
Function old new delta
vivaldi_function_row_physmap_show - 292 +292
_sub_I_65535_1 1057564 1057616 +52
_sub_D_65535_0 1057564 1057616 +52
e843419@49f2_00062737_9b04 - 8 +8
e843419@20f6_0002a34d_35bc - 8 +8
atkbd_parse_fwnode_data 480 472 -8
atkbd_do_show_function_row_physmap 316 76 -240
function_row_physmap_show 620 148 -472
Total: Before=285581925, After=285581617, chg -0.00%
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We can use devm to register keyboard backlight LED on hammer devices, this
will allow us to use HID's driver data for something else later.
Link: https://lore.kernel.org/r/20220228075446.466016-2-dmitry.torokhov@gmail.com
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The smatch tool reported the following warning:
drivers/scsi/scsi_error.c:1988 scsi_decide_disposition() warn: ignoring
unreachable code.
Remove the "default:return FAILED;" instead of "return FAILED;" reported by
smatch, because compilers can provide more useful diagnostics about
switch/case statements that do not have a default statement, especially if
the "switch" applies to a value with enumeration type.
Link: https://lore.kernel.org/r/20220301080448.112813-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
