| Age | Commit message (Collapse) | Author |
|---|
|
There was a merge error in ther 14.2.0.0 patches that resulted in the SLI4
path using the SLI3 issue_abort_iotag() routine. This resulted in txcmplq
corruption.
Fix to use the SLI4 routine when SLI4.
Link: https://lore.kernel.org/r/20220323205545.81814-2-jsmart2021@gmail.com
Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths")
Cc: <stable@vger.kernel.org> # v5.2+
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.2.0.1
Link: https://lore.kernel.org/r/20220317032737.45308-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When recovering from a pci-parity error the driver is failing to re-create
queues, causing recovery to fail. Looking deeper, it was found that the
interrupt vector count allocated on the recovery was fewer than the vectors
originally allocated. This disparity resulted in CPU map entries with stale
information. When the driver tries to re-create the queues, it attempts to
use the stale information which indicates an eq/interrupt vector that was
no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs
in the lpfc_sli_reset_slot_s4 routine().
Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When injecting EEH errors the port is getting hung up waiting on the node
list to empty, message number 0233. The driver is stuck at this point and
also can't unload. The driver makes transport remoteport delete calls which
try to abort I/O's, but the EEH daemon has already called the driver to
detach and the detachment has set the global FC_UNLOADING flag. There are
several code paths that will avoid I/O cleanup if the FC_UNLOADING flag is
set, resulting in transports waiting for I/O while the driver is waiting on
transports to clean up.
Additionally, during study of the list, a locking issue was found in
lpfc_sli_abort_iocb_ring that could corrupt the list.
A special case was added to the lpfc_cleanup() routine to call
lpfc_sli_flush_rings() if the driver is FC_UNLOADING and if the pci-slot
is offline (e.g. EEH).
The SLI4 part of lpfc_sli_abort_iocb_ring() is changed to use the
ring_lock. Also added code to cancel the I/Os if the pci-slot is offline
and added checks and returns for the FC_UNLOADING and HBA_IOQ_FLUSH flags
to prevent trying to send an I/O that we cannot handle.
Link: https://lore.kernel.org/r/20220317032737.45308-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Following EEH errors, the driver can crash or hang when deleting the
localport or when attempting to unload.
The EEH handlers in the driver did not notify the NVMe-FC transport before
tearing the driver down. This was delayed until the resume steps. This
worked for SCSI because lpfc_block_scsi() would notify the
scsi_fc_transport that the target was not available but it would not clean
up all the references to the ndlp.
The SLI3 prep for dev reset handler did the lpfc_offline_prep() and
lpfc_offline() calls to get the port stopped before restarting. The SLI4
version of the prep for dev reset just destroyed the queues and did not
stop NVMe from continuing. Also because the port was not really stopped
the localport destroy would hang because the transport was still waiting
for I/O. Additionally, a devloss tmo can fire and post events to a stopped
worker thread creating another hang condition.
lpfc_sli4_prep_dev_for_reset() is modified to call lpfc_offline_prep() and
lpfc_offline() rather than just lpfc_scsi_dev_block() to ensure both SCSI
and NVMe transports are notified to block I/O to the driver.
Logic is added to devloss handler and worker thread to clean up ndlp
references and quiesce appropriately.
Link: https://lore.kernel.org/r/20220317032737.45308-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().
We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().
Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsi_cls_conn is alloced by kzalloc(), the whole iscsi_cls_conn is zero
filled already including the dd_data. So it is unnecessary to call memset
again.
Link: https://lore.kernel.org/r/20220317150116.194140-1-haowenchao@huawei.com
Reviewed-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function mpt3sas_transport_port_remove() called in
_scsih_expander_node_remove() frees the port field of the sas_expander
structure, leading to the following use-after-free splat from KASAN when
the ioc_info() call following that function is executed (e.g. when doing
rmmod of the driver module):
[ 3479.371167] ==================================================================
[ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531
[ 3479.393524]
[ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436
[ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021
[ 3479.409263] Call Trace:
[ 3479.411743] <TASK>
[ 3479.413875] dump_stack_lvl+0x45/0x59
[ 3479.417582] print_address_description.constprop.0+0x1f/0x120
[ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.429469] kasan_report.cold+0x83/0xdf
[ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas]
[ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40
[ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas]
[ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas]
[ 3479.465529] ? down_write+0xde/0x150
[ 3479.470746] ? up_write+0x14d/0x460
[ 3479.475840] ? kernfs_find_ns+0x137/0x310
[ 3479.481438] pci_device_remove+0x65/0x110
[ 3479.487013] __device_release_driver+0x316/0x680
[ 3479.493180] driver_detach+0x1ec/0x2d0
[ 3479.498499] bus_remove_driver+0xe7/0x2d0
[ 3479.504081] pci_unregister_driver+0x26/0x250
[ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas]
[ 3479.516144] __x64_sys_delete_module+0x2fd/0x510
[ 3479.522315] ? free_module+0xaa0/0xaa0
[ 3479.527593] ? __cond_resched+0x1c/0x90
[ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0
[ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70
[ 3479.546161] ? trace_hardirqs_on+0x1c/0x110
[ 3479.551828] do_syscall_64+0x35/0x80
[ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 3479.563402] RIP: 0033:0x7f1fc482483b
...
[ 3479.943087] ==================================================================
Fix this by introducing the local variable port_id to store the port ID
value before executing mpt3sas_transport_port_remove(). This local variable
is then used in the call to ioc_info() instead of dereferencing the freed
port structure.
Link: https://lore.kernel.org/r/20220322055702.95276-1-damien.lemoal@opensource.wdc.com
Fixes: 7d310f241001 ("scsi: mpt3sas: Get device objects using sas_address & portID")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-03-29
We've added 16 non-merge commits during the last 1 day(s) which contain
a total of 24 files changed, 354 insertions(+), 187 deletions(-).
The main changes are:
1) x86 specific bits of fprobe/rethook, from Masami and Peter.
2) ice/xsk fixes, from Maciej and Magnus.
3) Various small fixes, from Andrii, Yonghong, Geliang and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix clang compilation errors
ice: xsk: Fix indexing in ice_tx_xsk_pool()
ice: xsk: Stop Rx processing when ntc catches ntu
ice: xsk: Eliminate unnecessary loop iteration
xsk: Do not write NULL in SW ring at allocation failure
x86,kprobes: Fix optprobe trampoline to generate complete pt_regs
x86,rethook: Fix arch_rethook_trampoline() to generate a complete pt_regs
x86,rethook,kprobes: Replace kretprobe with rethook on x86
kprobes: Use rethook for kretprobe if possible
bpftool: Fix generated code in codegen_asserts
selftests/bpf: fix selftest after random: Urandom_read tracepoint removal
bpf: Fix maximum permitted number of arguments check
bpf: Sync comments for bpf_get_stack
fprobe: Fix sparse warning for acccessing __rcu ftrace_hash
fprobe: Fix smatch type mismatch warning
bpf/bpftool: Add unprivileged_bpf_disabled check against value of 2
====================
Link: https://lore.kernel.org/r/20220329234924.39053-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
argument contains uninitialized data
now = rtc_tm_to_ktime(tm);
^~~~~~~~~~~~~~~~~~~
tm is set by a successful call to __rtc_read_time()
but its return status is not checked. Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.
Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220326194236.2916310-1-trix@redhat.com
|
|
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 86559400b3ef ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220309092225.6930-1-linmq006@gmail.com
|
|
Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.
The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.
```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.
While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.
DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).
Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```
However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.
Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.
Cc: Jinke Fan <fanjinke@hygon.cn>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
|
|
ATS-M is a server platform based on Xe_HPG and Xe_HPM, but without
display support. From a driver point of view, it's easiest to just
handle it as DG2 (including identifying as PLATFORM_DG2), but with the
display disabled in the device info.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329000822.1323195-1-matthew.d.roper@intel.com
|
|
Add the missing logic to allow Lasi, WAX and Dino to set the
CPU affinity. This fixes IRQ migration to other CPUs when a
CPU is shutdown which currently holds the IRQs for one of those
chips.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties code update from Rafael Wysocki:
"This is based on new i2c material for 5.18-rc1 and simply reorganizes
the code on top of it so as to group similar functions together (Andy
Shevchenko)"
* tag 'devprop-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Don't split fwnode_get_irq*() APIs in the code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update ARM cpufreq drivers, the OPP (Operating Performance
Points) library and the power management documentation.
Specifics:
- Add per core DVFS support for QCom SoC (Bjorn Andersson), convert
to yaml binding (Manivannan Sadhasivam) and various other fixes to
the QCom drivers (Luca Weiss).
- Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan
Agner).
- Fix CPPC driver's freq/performance conversions (Pierre Gondois).
- Minor generic cleanups (Yury Norov).
- Introduce opp-microwatt property to the OPP core, bindings, etc
(Lukasz Luba).
- Convert DT bindings to schema format and various related fixes
(Yassine Oudjana).
- Expose OPP's OF node in debugfs (Viresh Kumar).
- Add Intel uncore frequency scaling documentation file to its
MAINTAINERS entry (Srinivas Pandruvada).
- Clean up the AMD P-state driver documentation (Jan Engelhardt)"
* tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
Documentation: amd-pstate: grammar and sentence structure updates
dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings
dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example
Documentation: EM: Describe new registration method using DT
OPP: Add support of "opp-microwatt" for EM registration
PM: EM: add macro to set .active_power() callback conditionally
OPP: Add "opp-microwatt" supporting code
dt-bindings: opp: Add "opp-microwatt" entry in the OPP
MAINTAINERS: Add additional file to uncore frequency control
cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev
cpufreq: qcom-hw: Add support for per-core-dcvs
dt-bindings: power: avs: qcom,cpr: Convert to DT schema
arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
arm64: dts: qcom: msm8996: Rename cluster OPP tables
dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
dt-bindings: opp: qcom-opp: Convert to DT schema
arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
opp: Expose of-node's name in debugfs
cpufreq: CPPC: Fix performance/frequency conversion
...
|
|
* clk-sifive:
clk: sifive: Move all stuff into SoCs header files from C files
clk: sifive: Add SoCs prefix in each SoCs-dependent data
riscv: dts: Change the macro name of prci in each device node
dt-bindings: change the macro name of prci in header files and example
clk: sifive: duplicate the macro definitions for the time being
* clk-visconti:
clk: visconti: prevent array overflow in visconti_clk_register_gates()
|
|
clk-next
- Make clk_set_rate_range() re-evaluate the limits each time
- Introduce various clk_set_rate_range() tests
- Add clk_drop_range() to drop a previously set range
- Support for NCO blocks on Apple SoCs
* clk-range:
clk: Drop the rate range on clk_put()
clk: test: Test clk_set_rate_range on orphan mux
clk: Initialize orphan req_rate
clk: bcm: rpi: Run some clocks at the minimum rate allowed
clk: bcm: rpi: Set a default minimum rate
clk: bcm: rpi: Add variant structure
clk: Add clk_drop_range
clk: Always set the rate on clk_set_range_rate
clk: Use clamp instead of open-coding our own
clk: Always clamp the rounded rate
clk: Enforce that disjoints limits are invalid
clk: Introduce Kunit Tests for the framework
clk: Fix clk_hw_get_clk() when dev is NULL
* clk-uniphier:
clk: uniphier: Fix fixed-rate initialization
* clk-apple:
clk: clk-apple-nco: Allow and fix module building
MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE
clk: clk-apple-nco: Add driver for Apple NCO
dt-bindings: clock: Add Apple NCO
* clk-qcom: (61 commits)
clk: qcom: gcc-msm8994: Fix gpll4 width
dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
clk: qcom: Add display clock controller driver for SM6125
dt-bindings: clock: add QCOM SM6125 display clock bindings
clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig
clk: qcom: gcc: Add emac GDSC support for SM8150
clk: qcom: gcc: sm8150: Fix some identation issues
clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150
clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150
clk: qcom: clk-rcg2: Update the frac table for pixel clock
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
clk: qcom: smd: Add missing MSM8998 RPM clocks
clk: qcom: smd: Add missing RPM clocks for msm8992/4
dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks
clk: qcom: gcc-ipq806x: add CryptoEngine resets
dt-bindings: reset: add ipq8064 ce5 resets
clk: qcom: gcc-ipq806x: add CryptoEngine clocks
dt-bindings: clock: add ipq8064 ce5 clk define
clk: qcom: gcc-ipq806x: add additional freq for sdc table
clk: qcom: clk-rcg: add clk_rcg_floor_ops ops
...
|
|
into clk-next
- Audio clks on StarFive JH7100 RISC-V SoC
- Terminate arrays with sentinels and make that clearer
- Cleanup SPDX tags
- Fix typos in comments
* clk-starfive:
clk: starfive: Add JH7100 audio clock driver
clk: starfive: jh7100: Support more clock types
clk: starfive: jh7100: Make hw clock implementation reusable
dt-bindings: clock: Add starfive,jh7100-audclk bindings
dt-bindings: clock: Add JH7100 audio clock definitions
clk: starfive: jh7100: Handle audio_div clock properly
clk: starfive: jh7100: Don't round divisor up twice
* clk-ti:
clk: ti: Drop legacy compatibility clocks for dra7
clk: ti: Drop legacy compatibility clocks for am4
clk: ti: Drop legacy compatibility clocks for am3
clk: ti: Update component clocks to use ti_dt_clk_name()
clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()
clk: ti: Add ti_dt_clk_name() helper to use clock-output-names
clk: ti: Use clock-output-names for clkctrl
clk: ti: Add ti_find_clock_provider() to use clock-output-names
clk: ti: Optionally parse IO address from parent clock node
clk: ti: Preserve node in ti_dt_clocks_register()
clk: ti: Constify clkctrl_name
* clk-terminate:
clk: actions: Make sentinel elements more obvious
clk: clps711x: Terminate clk_div_table with sentinel element
clk: hisilicon: Terminate clk_div_table with sentinel element
clk: loongson1: Terminate clk_div_table with sentinel element
clk: actions: Terminate clk_div_table with sentinel element
* clk-cleanup:
clk: zynq: Update the parameters to zynq_clk_register_periph_clk
clk: zynq: trivial warning fix
clk: qcom: sm6125-gcc: fix typos in comments
clk: ti: clkctrl: fix typos in comments
clk: COMMON_CLK_LAN966X should depend on SOC_LAN966
clk: Use of_device_get_match_data()
clk: bcm2835: Remove unused variable
clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
clk: cleanup comments
clk: socfpga: cleanup spdx tags
|
|
clk-next
- Mark mux table as const in clk-mux
- Make the all_lists array const
* clk-mvebu:
clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it
* clk-const:
clk: Mark clk_core_evict_parent_cache_subtree() 'target' const
clk: Mark 'all_lists' as const
clk: pistachio: Declare mux table as const u32[]
clk: qcom: Declare mux table as const u32[]
clk: mmp: Declare mux tables as const u32[]
clk: hisilicon: Remove unnecessary cast of mux table to u32 *
clk: mux: Declare u32 *table parameter as const
clk: nxp: Declare mux table parameter as const u32 *
clk: nxp: Remove unused variable
* clk-imx: (28 commits)
dt-bindings: clock: drop useless consumer example
clk: imx: Select MXC_CLK for i.MX93 clock driver
clk: imx: remove redundant re-assignment of pll->base
MAINTAINERS: clk: imx: add git tree and dt-bindings files
clk: imx: pll14xx: Support dynamic rates
clk: imx: pll14xx: Add pr_fmt
clk: imx: pll14xx: explicitly return lowest rate
clk: imx: pll14xx: name variables after usage
clk: imx: pll14xx: consolidate rate calculation
clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP
clk: imx: pll14xx: Drop wrong shifting
clk: imx: pll14xx: Use register defines consistently
clk: imx8mp: remove SYS PLL 1/2 clock gates
clk: imx8mn: remove SYS PLL 1/2 clock gates
clk: imx8mm: remove SYS PLL 1/2 clock gates
clk: imx: add i.MX93 clk
clk: imx: support fracn gppll
clk: imx: add i.MX93 composite clk
dt-bindings: clock: add i.MX93 clock definition
dt-bindings: clock: Add imx93 clock support
...
* clk-rockchip:
clk: rockchip: re-add rational best approximation algorithm to the fractional divider
clk/rockchip: Use of_device_get_match_data()
clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568
clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568
clk: rockchip: Add more PLL rates for rk3568
|
|
into clk-next
- Kunit tests for clk-gate implementation
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
support for dynamic mode
* clk-xilinx:
clk: zynqmp: replace warn_once with pr_debug for failed clock ops
* clk-kunit:
clk: gate: Add some kunit test suites
* clk-cs2000:
clk: cs2000-cp: convert driver to regmap
clk: cs2000-cp: freeze config during register fiddling
clk: cs2000-cp: make clock skip setting configurable
clk: cs2000-cp: add support for dynamic mode
clk: cs2000-cp: Make aux output function controllable
dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode
dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag
dt-bindings: clock: cs2000-cp: document aux-output-source
dt-bindings: clock: convert cs2000-cp bindings to yaml
* clk-renesas:
dt-bindings: clock: renesas: Make example 'clocks' parsable
clk: rs9: Add Renesas 9-series PCIe clock generator driver
clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
clk: renesas: r8a779f0: Add PFC clock
clk: renesas: r8a779f0: Add I2C clocks
clk: renesas: r8a779f0: Add WDT clock
clk: renesas: r8a779f0: Fix RSW2 clock divider
clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
dt-bindings: clock: renesas: Document RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
clk: renesas: r8a779a0: Add CANFD module clock
clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
clk: renesas: r8a7799[05]: Add MLP clocks
clk: renesas: r8a779f0: Add SYS-DMAC clocks
|
|
into clk-next
- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code
* clk-microchip:
clk: microchip: Add driver for Microchip PolarFire SoC
dt-bindings: clk: microchip: Add Microchip PolarFire host binding
* clk-si:
clk-si5341: replace snprintf in show functions with sysfs_emit
clk: si5341: fix reported clk_rate when output divider is 2
* clk-mtk: (32 commits)
clk: mediatek: Warn if clk IDs are duplicated
clk: mediatek: mt8195: Implement remove functions
clk: mediatek: mt8195: Implement error handling in probe functions
clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()
clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path
clk: mediatek: mtk: Implement error handling in register APIs
clk: mediatek: pll: Implement error handling in register API
clk: mediatek: mux: Implement error handling in register API
clk: mediatek: mux: Reverse check for existing clk to reduce nesting level
clk: mediatek: gate: Implement error handling in register API
clk: mediatek: cpumux: Implement error handling in register API
clk: mediatek: mtk: Clean up included headers
clk: mediatek: Add mtk_clk_simple_remove()
clk: mediatek: Implement mtk_clk_unregister_composites() API
clk: mediatek: Implement mtk_clk_unregister_divider_clks() API
clk: mediatek: Implement mtk_clk_unregister_factors() API
clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API
clk: mediatek: pll: Clean up included headers
clk: mediatek: pll: Implement unregister API
clk: mediatek: pll: Split definitions into separate header file
...
* clk-at91:
clk: at91: clk-master: remove dead code
clk: at91: sama7g5: fix parents of PDMCs' GCLK
clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT
clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT
* clk-st:
clk: stm32mp1: Add parent_data to ETHRX clock
clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
|
|
In case there are only one gate or the two_gate is 0 the clk1 clock
passed is not used. We are passing 0 which is arm_pll.
Pass a invalid clock instead.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix the below warning
WARNING: Missing a blank line after declarations
+ int enable = !!(fclk_enable & BIT(i - fclk0));
+ zynq_clk_register_fclk(i, clk_output_name[i],
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-2-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Merge OPP (Operating Performance Points) changes for 5.18-rc1.
* pm-opp:
Documentation: EM: Describe new registration method using DT
OPP: Add support of "opp-microwatt" for EM registration
PM: EM: add macro to set .active_power() callback conditionally
OPP: Add "opp-microwatt" supporting code
dt-bindings: opp: Add "opp-microwatt" entry in the OPP
dt-bindings: power: avs: qcom,cpr: Convert to DT schema
arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables
arm64: dts: qcom: msm8996: Rename cluster OPP tables
dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema
dt-bindings: opp: qcom-opp: Convert to DT schema
arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible
dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles
opp: Expose of-node's name in debugfs
|
|
Add support for the AUO B133UAN01 13.3" WUXGA panel.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324134819.v2.1.I816014b6c62da5a33af5021f3cc35cea66552c00@changeid
|
|
Pull dma-mapping updates from Christoph Hellwig:
- do not zero buffer in set_memory_decrypted (Kirill A. Shutemov)
- fix return value of dma-debug __setup handlers (Randy Dunlap)
- swiotlb cleanups (Robin Murphy)
- remove most remaining users of the pci-dma-compat.h API
(Christophe JAILLET)
- share the ABI header for the DMA map_benchmark with userspace
(Tian Tao)
- update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen)
- remove CONFIG_DMA_REMAP (me)
* tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: benchmark: extract a common header file for map_benchmark definition
dma-debug: fix return value of __setup handlers
dma-mapping: remove CONFIG_DMA_REMAP
media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API
rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API
sparc: Remove usage of the deprecated "pci-dma-compat.h" API
agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API
alpha: Remove usage of the deprecated "pci-dma-compat.h" API
MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK
swiotlb: simplify array allocation
swiotlb: tidy up includes
swiotlb: simplify debugfs setup
swiotlb: do not zero buffer in set_memory_decrypted()
|
|
Freescale Layerscape Lynx 28G SerDes PHYs are only present on
Freescale/NXP Layerscape SoCs.
Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter
is meant for i.MX8 SoCs, which is a different family than Layerscape.
Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about
this driver when configuring a kernel without Layerscape SoC support.
Fixes: 02e2af20f4f9f2aa ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc")
Fixes: 8f73b37cf3fbda67 ("phy: add support for the Layerscape SerDes 28G")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
SDVO is the only connector type currently returning the VBT
fixed mode directly from .get_modes(), everyone else just
adds it to the fixed_modes list and then returns that from
.get_modes(). Adjust SDVO to follow the common behaviour.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Despite the name intel_panel_edid_fixed_mode() doesn't actually
look in the EDID. All it does is dig out the preferred mode from
the connector's probed_modes list. That is also what the SDVO
LVDS code is doing by hand. Let's just call
intel_panel_edid_fixed_mode().
The slight difference in behaviour is that the SDVO code currently
bails if it can't find the preferred mode, whereas
intel_panel_edid_fixed_mode() will fall back to just returning
the first mode from the probed_modes list. Can't imagine why
such an LVDS panel would even exist, and also why would you have
a panel and be expected to not use it? So I'm going to assume
this is a total non-issue.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Apart from the EDID and VBT based mechanism we also sometimes
use the encoder's current mode as the panel fixed mode. We
currently have the same code for that duplicated in two places.
Let's unify.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have a function for duplicating the VBT LFP mode. Add the same
for the VBT SDVO mode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Rename intel_panel_vbt_fixed_mode() to
intel_panel_vbt_lfp_fixed_mode() to be more descriptive.
We'll have another VBT fixed mode function soon and we
don't want to confuse the two.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use intel_panel_preferred_fixed_mode() for all the orientation
quirk setup and compute_is_dual_link_lvds()). All of these
happen after intel_panel_init() so the panel fixed_mode list
is already in place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Pull the drm_connector_set_panel_orientation_with_quirk()
into intel_edp_add_properties() to match how the DSI encoders
do it. Less clutter in intel_edp_init_connector() overall.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace all drm_mode_debug_printmodeline() calls with
DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more
terse in places where we previously had a newline in the precedeing
drm_dbg_kms(), and avoids anything else sneaking in between the two
printk()s in all cases.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
All the other intel_panel functions take struct intel_connector,
so might as well make init()/fini() take one as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move most of the pipe+output CSC programming to the
.color_commit_noarm() hook which runs before vblank evasion.
Only PIPE_CSC_MODE (the arming register) needs to remain in
inside the critical section.
A test case that just updates the CTM in a loop produces
the following i915_update_info numbers on ilk (w/o lockdep):
old new
Updates: 10012 Updates: 10008
| |
1us |** 1us |**********
|************* |*************
4us |********* 4us |*
|* |**
16us | 16us |
| |
66us | 66us |
| |
262us | 262us |
| |
1ms | 1ms |
| |
4ms | 4ms |
| |
17ms | 17ms |
| |
Min update: 1345ns Min update: 1268ns
Max update: 16672ns Max update: 15656ns
Average update: 3914ns Average update: 2185ns
Overruns > 100us: 0 Overruns > 100us: 0
And here is tgl (forced to update both pipe CSC and
output CSC, and with lockdep enabled):
old new
Updates: 10012 Updates: 10012
| |
1us | 1us |
| |
4us |* 4us |**
|** |**********
16us |************* 16us |*************
|* |
66us | 66us |
| |
262us | 262us |
| |
1ms | 1ms |
| |
4ms | 4ms |
| |
17ms | 17ms |
| |
Min update: 5204ns Min update: 5176ns
Max update: 176038ns Max update: 186685ns
Average update: 23931ns Average update: 16654ns
Overruns > 250us: 0 Overruns > 250us: 0
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
To reduce the amount of registers written during the vblank evade
critical section let's also split the .color_commit() hook to
noarm+arm pair. The noarm hook runs before the vblank evasion
with the arm hook staying inside the critical section.
Just the framework here, actually moving stuff out into the noarm
hook will follow.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
The ilk+ panel fitter register are sitting nicely on their own
cacheline, so no need for global serialization via uncore.lock.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
All the skl+ scaler registers are suitably confined to their own
cachelines so we don't need the uncore.lock to globally serialize
access to these registers. We actually already dropped some of this
in commit 14ad15296d1f ("drm/i915: Make skl+ universal plane
registers unlocked") as the plane scaler enabling/reconfiguration
became lockless. So let's complete that and remove the rest of
the locks from the scaler programming as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220224165103.15682-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.
Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
PCI pass-thru devices in a Hyper-V VM are represented as a VMBus
device and as a PCI device. The coherence of the VMbus device is
set based on the VMbus node in ACPI, but the PCI device has no
ACPI node and defaults to not hardware coherent. This results
in extra software coherence management overhead on ARM64 when
devices are hardware coherent.
Fix this by setting up the PCI host bus so that normal
PCI mechanisms will propagate the coherence of the VMbus
device to the PCI device. There's no effect on x86/x64 where
devices are always hardware coherent.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1648138492-2191-3-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
VMbus synthetic devices are not represented in the ACPI DSDT -- only
the top level VMbus device is represented. As a result, on ARM64
coherence information in the _CCA method is not specified for
synthetic devices, so they default to not hardware coherent.
Drivers for some of these synthetic devices have been recently
updated to use the standard DMA APIs, and they are incurring extra
overhead of unneeded software coherence management.
Fix this by propagating coherence information from the VMbus node
in ACPI to the individual synthetic devices. There's no effect on
x86/x64 where devices are always hardware coherent.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1648138492-2191-2-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The vmbus driver relies on the panic notifier infrastructure to perform
some operations when a panic event is detected. Since vmbus can be built
as module, it is required that the driver handles both registering and
unregistering such panic notifier callback.
After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
though, the panic notifier registration is done unconditionally in the module
initialization routine whereas the unregistering procedure is conditionally
guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability
is set.
This patch fixes that by unconditionally unregistering the panic notifier
in the module's exit routine as well.
Fixes: 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
vmbus_device_register()
Initialize the device's dma_{mask,parms} pointers and the device's
dma_mask value before invoking device_register(). Address the
following trace with 5.17-rc7:
[ 49.646839] WARNING: CPU: 0 PID: 189 at include/linux/dma-mapping.h:543
netvsc_probe+0x37a/0x3a0 [hv_netvsc]
[ 49.646928] Call Trace:
[ 49.646930] <TASK>
[ 49.646935] vmbus_probe+0x40/0x60 [hv_vmbus]
[ 49.646942] really_probe+0x1ce/0x3b0
[ 49.646948] __driver_probe_device+0x109/0x180
[ 49.646952] driver_probe_device+0x23/0xa0
[ 49.646955] __device_attach_driver+0x76/0xe0
[ 49.646958] ? driver_allows_async_probing+0x50/0x50
[ 49.646961] bus_for_each_drv+0x84/0xd0
[ 49.646964] __device_attach+0xed/0x170
[ 49.646967] device_initial_probe+0x13/0x20
[ 49.646970] bus_probe_device+0x8f/0xa0
[ 49.646973] device_add+0x41a/0x8e0
[ 49.646975] ? hrtimer_init+0x28/0x80
[ 49.646981] device_register+0x1b/0x20
[ 49.646983] vmbus_device_register+0x5e/0xf0 [hv_vmbus]
[ 49.646991] vmbus_add_channel_work+0x12d/0x190 [hv_vmbus]
[ 49.646999] process_one_work+0x21d/0x3f0
[ 49.647002] worker_thread+0x4a/0x3b0
[ 49.647005] ? process_one_work+0x3f0/0x3f0
[ 49.647007] kthread+0xff/0x130
[ 49.647011] ? kthread_complete_and_exit+0x20/0x20
[ 49.647015] ret_from_fork+0x22/0x30
[ 49.647020] </TASK>
[ 49.647021] ---[ end trace 0000000000000000 ]---
Fixes: 743b237c3a7b0 ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220315141053.3223-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
isolated guests
hv_panic_page might contain guest-sensitive information, do not dump it
over to Hyper-V by default in isolated guests.
While at it, update some comments in hyperv_{panic,die}_event().
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20220301141135.2232-1-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Reduce the size of the function that actually modifies the EDID.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/437c3c79f68d1144444fb2dd18a678f3aa97272c.1648477901.git.jani.nikula@intel.com
|
|
With this, the remaining non-const parts are the ones that actually
modify the EDID, for example to fix corrupt EDID.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7156f22494b585c55a00a6732462bde0cc19dbf.1648477901.git.jani.nikula@intel.com
|
|
Finalize detailed timing parsing constness by making struct edid also
const in callbacks and closure.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8229be49b5a7686856c17428aa9291b4c4cf1bd5.1648477901.git.jani.nikula@intel.com
|
