summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-07-09PCI: dw-rockchip: Add error messages in .probe() error pathsUwe Kleine-König
Drivers that silently fail to probe provide a bad user experience and make it unnecessarily hard to debug such a failure. Fix it by using dev_err_probe() instead of a plain return. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240227141256.413055-2-ukleinek@debian.org Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpioManivannan Sadhasivam
Rockchip platforms use 'GPIO_ACTIVE_HIGH' flag in the devicetree definition for ep_gpio. This means, whatever the logical value set by the driver for the ep_gpio, physical line will output the same logic level. For instance, gpiod_set_value_cansleep(rockchip->ep_gpio, 0); --> Level low gpiod_set_value_cansleep(rockchip->ep_gpio, 1); --> Level high But while requesting the ep_gpio, GPIOD_OUT_HIGH flag is currently used. Now, this also causes the physical line to output 'high' creating trouble for endpoint devices during host reboot. When host reboot happens, the ep_gpio will initially output 'low' due to the GPIO getting reset to its POR value. Then during host controller probe, it will output 'high' due to GPIOD_OUT_HIGH flag. Then during rockchip_pcie_host_init_port(), it will first output 'low' and then 'high' indicating the completion of controller initialization. On the endpoint side, each output 'low' of ep_gpio is accounted for PERST# assert and 'high' for PERST# deassert. With the above mentioned flow during host reboot, endpoint will witness below state changes for PERST#: (1) PERST# assert - GPIO POR state (2) PERST# deassert - GPIOD_OUT_HIGH while requesting GPIO (3) PERST# assert - rockchip_pcie_host_init_port() (4) PERST# deassert - rockchip_pcie_host_init_port() Now the time interval between (2) and (3) is very short as both happen during the driver probe(), and this results in a race in the endpoint. Because, before completing the PERST# deassertion in (2), endpoint got another PERST# assert in (3). A proper way to fix this issue is to change the GPIOD_OUT_HIGH flag in (2) to GPIOD_OUT_LOW. Because the usual convention is to request the GPIO with a state corresponding to its 'initial/default' value and let the driver change the state of the GPIO when required. As per that, the ep_gpio should be requested with GPIOD_OUT_LOW as it corresponds to the POR value of '0' (PERST# assert in the endpoint). Then the driver can change the state of the ep_gpio later in rockchip_pcie_host_init_port() as per the initialization sequence. This fixes the firmware crash issue in Qcom based modems connected to Rockpro64 based board. Fixes: e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support") Closes: https://lore.kernel.org/mhi/20240402045647.GG2933@thinkpad/ Link: https://lore.kernel.org/linux-pci/20240416-pci-rockchip-perst-fix-v1-1-4800b1d4d954@linaro.org Reported-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Cc: stable@vger.kernel.org # v4.9
2024-07-09PCI: rockchip-host: Wait 100ms after reset before starting configurationDamien Le Moal
PCIe r6.0, sec 6.6.1, states that the host should wait for at least 100 msec from the end of a conventional reset (PERST# is de-asserted) before sending a configuration request to ensure that the device is able to respond with a "Request Retry Status" completion. Add the PCIE_T_RRS_READY_MS macro to define this wait time and modify rockchip_pcie_host_init_port() to add this 100ms sleep after deasserting PERST# using the ep_gpio GPIO. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-3-dlemoal@kernel.org Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handlingDamien Le Moal
PCIe CEM r5.1, sec 2.9.2, mandates that the PERST# signal must remain asserted for at least 100 usec (Tperst-clk) after the PCIe reference clock becomes stable (if a reference clock is supplied), and for at least 100 msec after the power is stable (Tpvperl, defined by the macro PCIE_T_PVPERL_MS). Modify rockchip_pcie_host_init_port() to satisfy these constraints by adding a sleep period before deasserting PERST# using the ep_gpio GPIO. Since Tperst-clk is the shorter wait time, add an msleep() call for the longer PCIE_T_PVPERL_MS milliseconds to handle both timing requirements. Link: https://lore.kernel.org/linux-pci/20240413004120.1099089-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: dwc: ep: Enforce DWC specific 64-bit BAR limitationNiklas Cassel
From the DWC EP databook 5.96a, section "3.5.7.1.4 General Rules for BAR Setup (Fixed Mask or Programmable Mask Schemes Only)": "Any pair (for example BARs 0 and 1) can be configured as one 64-bit BAR, two 32-bit BARs, or one 32-bit BAR." "BAR pairs cannot overlap to form a 64-bit BAR. For example, you cannot combine BARs 1 and 2 to form a 64-bit BAR." While this limitation does exist in some other PCI endpoint controllers, e.g. cdns_pcie_ep_set_bar(), the limitation does not appear to be defined in the PCIe specification itself, thus add an explicit check for this in dw_pcie_ep_set_bar() (rather than pci_epc_set_bar()). Link: https://lore.kernel.org/linux-pci/20240528134839.8817-2-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: layerscape-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link ↵Manivannan Sadhasivam
Down event Now that dw_pcie_ep_linkdown() is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Closes: https://lore.kernel.org/linux-pci/20240528195539.GA458945@bhelgaas Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-5-4395534520dc@linaro.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: qcom-ep: Use the generic dw_pcie_ep_linkdown() API to handle Link Down ↵Manivannan Sadhasivam
event Now that the generic dw_pcie_ep_linkdown() API is available, use it. This also handles the reinitialization of DWC non-sticky registers in addition to sending the notification to EPF drivers. Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-9-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapperManivannan Sadhasivam
Currently dw_pcie_ep_init_notify() wrapper just calls pci_epc_init_notify() directly, so this wrapper provides no benefit to the glue drivers. Remove it and call pci_epc_init_notify() directly from glue drivers. Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/linux-pci/20240606-pci-deinit-v1-1-4395534520dc@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: ep: Add a generic dw_pcie_ep_linkdown() API to handle Link Down eventManivannan Sadhasivam
Per PCIe r6.0, sec 5.2, a Link Down event can happen under any of the following circumstances: 1. Fundamental/Hot reset 2. Link disable transmission by upstream component 3. Moving from L2/L3 to L0 In those cases, Link Down causes some non-sticky DWC registers to lose the state (like REBAR, etc.), so drivers need to reinitialize them to function properly once the link comes back again. This is not a problem for drivers supporting PERST# IRQ, since they can reinitialize the registers in the PERST# IRQ callback. But for the drivers not supporting PERST#, there is no way they can reinitialize the registers other than relying on Link Down IRQ received when the link goes down. So add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the non-sticky registers and also notifies the EPF drivers about link going down. This API can also be used by the drivers supporting PERST# to handle the scenario (2) mentioned above. NOTE: For the sake of code organization, move the dw_pcie_ep_linkup() definition just above dw_pcie_ep_linkdown(). Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-8-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: update spec citation] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system ↵Frank Li
suspend Instead of relying on the vendor specific implementations to send the PME_Turn_Off message, introduce a generic way of sending the message using the MSG TLP. This is achieved by reserving a region for MSG TLP of size 'pci->region_align', at the end of the first IORESOURCE_MEM window of the host bridge. And then sending the PME_Turn_Off message during system suspend with the help of iATU. The reason for reserving the MSG TLP region at the end of the IORESOURCE_MEM is to avoid generating holes in between, because when the region is allocated using allocate_resource(), memory will be allocated from the start of the window. Later, if memory gets allocated for an endpoint of size bigger than 'region_align', there will be a hole between MSG TLP region and endpoint memory. This generic implementation is optional for the glue drivers and can be overridden by a custom 'pme_turn_off' callback. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-5-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macroFrank Li
Add PCIE_MSG_CODE_PME_TURN_OFF macros to enable a PCIe host driver to send PME_Turn_Off messages. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-4-a54265c39742@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Add PCIE_MSG_CODE_ASSERT_INTx message macrosYoshihiro Shimoda
Add "Message Routing" and "INTx Mechanism Messages" macros to enable a PCIe driver to send messages for INTx Interrupt Signaling. Values from PCIe r6.1, sec 2.2.8 and 2.2.8.1. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-1-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Add outbound MSG TLPs supportYoshihiro Shimoda
Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering INTx IRQs by iATU in the PCIe endpoint mode in near the future. PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of MsgD. This implementation supports the data-less messages only for now. Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structureYoshihiro Shimoda
This is a preparation before adding the Msg-type outbound iATU mapping. The respective update will require two more arguments added to __dw_pcie_prog_outbound_atu(). That will make the already complicated function prototype even more hard to comprehend accepting _eight_ arguments. To prevent that and keep the code more-or-less readable, move all the outbound iATU-related arguments to a new config structure: struct dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The structure should be locally defined and populated with the outbound iATU settings implied by the caller context. As a result of this change there is no longer need in having the two distinctive methods for the Host and Endpoint outbound iATU setups since the code can directly call the dw_pcie_prog_outbound_atu() method with the config structure populated, so drop dw_pcie_prog_ep_outbound_atu(). [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-07-09PCI: dwc: Fix index 0 incorrectly being interpreted as a free ATU slotFrank Li
When PERST# assert and deassert happens on the PERST# supported platforms, both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the area that was previously allocated (iATU0) for BAR0, instead of the new area (iATU6) for BAR0. Right now, this isn't an issue because both iATU0 and iATU6 should translate inbound accesses to BAR0 to the same allocated memory area. However, having two separate inbound mappings for the same BAR is a disaster waiting to happen. The mappings between PCI BAR and iATU inbound window are maintained in the dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the existing mapping in the array and if it is not found (i.e., value in the array indexed by the BAR is found to be 0), it allocates a new map value using find_first_zero_bit(). The issue is the existing logic failed to consider the fact that the map value '0' is a valid value for BAR0, so find_first_zero_bit() will return '0' as the map value for BAR0 (note that it returns the first zero bit position). Due to this, when PERST# assert + deassert happens on the PERST# supported platforms, the inbound window allocation restarts from BAR0 and the existing logic to find the BAR mapping will return '6' for BAR0 instead of '0' due to the fact that it considers '0' as an invalid map value. Fix this issue by always incrementing the map value before assigning to bar_to_atu[] array and then decrementing it while fetching. This will make sure that the map value '0' always represents the invalid mapping." Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address") Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/ Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
2024-07-09PCI: dwc: Use msleep() in dw_pcie_wait_for_link()Konrad Dybcio
According to [1], msleep should be used for large sleeps, such as the 100-ish ms one in this function. Comply with the guide and use it. [1] https://docs.kernel.org/timers/timers-howto.html [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09misc: pci_endpoint_test: Remove unused pci_endpoint_test_bar_{readl,writel} ↵Jiapeng Chong
functions These two functions are defined in the pci_endpoint_test.c file, but not called elsewhere, so delete these unused functions. This fixes the following warning: drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'. drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'. No functional changes intended. [kwilczynski: commit log] Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064 Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-07-09misc: pci_endpoint_test: Document policy about adding pci_device_idYoshihiro Shimoda
Add a comment suggesting that if the endpoint controller Vendor and Device ID are programmable, an existing entry might be usable for testing without having to add an entry to pci_endpoint_test_tbl[]. Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2024-07-09misc: pci_endpoint_test: Refactor dma_set_mask_and_coherent() logicFrank Li
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit, unless the architecture has no DMA support. So no need to check for the error and also no need to set dma_set_mask_and_coherent(32) as a fallback. Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support (theoretically), then dma_set_mask_and_coherent(32) will also fail for the same reason. So the fallback doesn't make sense. Simplify the code by setting the streaming and coherent DMA mask to 48 bits. Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09misc: pci_endpoint_test: Use memcpy_toio()/memcpy_fromio() for BAR testsNiklas Cassel
The current code uses writel()/readl(), which has an implicit memory barrier for every single readl()/writel(). Additionally, reading 4 bytes at a time over the PCI bus is not really optimal, considering that this code is running in an ioctl handler. Use memcpy_toio()/memcpy_fromio() for BAR tests. Before patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 1.56s After patch with a 4MB BAR: $ time /usr/bin/pcitest -b 1 BAR1: OKAY real 0m 0.54s Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-07-09misc: pci_endpoint_test: Add support for Rockchip rk3588Niklas Cassel
Rockchip rk3588 requires 64KB alignment for BARs. While there is an existing device_id:vendor_id in the driver with 64KB alignment, that device_id:vendor_id is am654, which uses BAR2 instead of BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks in the driver to disallow BAR0. In order to allow testing all BARs, add a new rk3588 entry in the driver. We intentionally do not add the vendor id to pci_ids.h, since the policy for that file is that the vendor id has to be used by multiple drivers. Hopefully, this new entry will be short-lived, as there is a series on the mailing list which intends to move the address alignment restrictions from this driver to the endpoint side. Add a new entry for rk3588 in order to allow us to test all BARs. Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: kirin: Convert to use agnostic GPIO APIAndy Shevchenko
The of_gpio.h legacy API is going to be removed. In preparation for that, convert the driver to the agnostic API. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org>
2024-07-09hwmon: (g762) Initialize fans after configuring clockGuenter Roeck
Adding support for G761 included adding support for an internal clock. Enabling the internal clock requires setting a bit in the FAN_CMD2 register. This is implemented in g762_fan_init(). However, g762_fan_init() is called before clock support is selected, and the flag indicating that the internal clock should be used is not yet set. Initialize the clock before initializing the fan to solve the problem. While at it, also add "g7621" to the i2c_device_id array. Cc: Christian Marangi <ansuelsmth@gmail.com> Fixes: 6ce402327a6f ("hwmon: g672: add support for g761") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-07-09PCI: kirin: Convert kirin_pcie_parse_port() to scoped iteratorJavier Carrasco
Convert loops in kirin_pcie_parse_port() to use the _scoped() version of for_each_available_child_of_node() so the refcounts of children are implicitly decremented when the loop is exited. No functional change intended here, but it will make future error exits from these loops easier. Link: https://lore.kernel.org/linux-pci/20240609-pcie-kirin-memleak-v1-1-62b45b879576@gmail.com Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: move to GPIO series to avoid bisection hole, commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-09PCI: qcom: Add OPP support to scale performanceKrishna chaitanya chundru
QCOM Resource Power Manager-hardened (RPMh) is a hardware block which maintains hardware state of a regulator by performing max aggregation of the requests made by all of the clients. PCIe controller can operate on different RPMh performance state of power domain based on the speed of the link. And this performance state varies from target to target, like some controllers support GEN3 in NOM (Nominal) voltage corner, while some other supports GEN3 in low SVS (static voltage scaling). The SoC can be more power efficient if we scale the performance state based on the aggregate PCIe link bandwidth. Add Operating Performance Points (OPP) support to vote for RPMh state based on the aggregate link bandwidth. OPP can handle ICC bw voting also, so move ICC bw voting through OPP framework if OPP entries are present. As we are moving ICC voting as part of OPP, don't initialize ICC if OPP is supported. Before PCIe link is initialized vote for highest OPP in the OPP table, so that we are voting for maximum voltage corner for the link to come up in maximum supported speed. Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-4-aa769a2173a3@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: wrap comments to fit in 80 columns] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps()Krishna chaitanya chundru
Bring the switch case in pcie_link_speed_mbps() to new function to the header file so that it can be used in other places like in controller driver. Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-3-aa769a2173a3@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: qcom: Add ICC bandwidth vote for CPU to PCIe pathKrishna chaitanya chundru
To access the host controller registers of the host controller and the endpoint BAR/config space, the CPU-PCIe ICC (interconnect) path should be voted otherwise it may lead to NoC (Network on chip) timeout. We are surviving because of other driver voting for this path. As there is less access on this path compared to PCIe to mem path add minimum vote i.e 1KBps bandwidth always which is sufficient enough to keep the path active and is recommended by HW team. During S2RAM (Suspend-to-RAM), the DBI access can happen very late (while disabling the boot CPU). So do not disable the CPU-PCIe interconnect path during S2RAM as that may lead to NoC error. Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-1-aa769a2173a3@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: qcom-ep: Disable resources unconditionally during PERST# assertManivannan Sadhasivam
All EP specific resources are enabled during PERST# deassert. As a counter operation, all resources should be disabled during PERST# assert. There is no point in skipping that if the link was not enabled. This will also result in enablement of the resources twice if PERST# got deasserted again. So remove the check from qcom_pcie_perst_assert() and disable all the resources unconditionally. Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-1-22832d0d456f@linaro.org Tested-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org>
2024-07-09PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EPMrinmay Sarkar
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute in its TLP for all the PCIe controllers. NO_SNOOP attribute when set, the requester is indicating that no cache coherency issues exist for the addressed memory on the host i.e., memory is not cached. But in reality, requester cannot assume this unless there is a complete control/visibility over the addressed memory on the host. And worst case, if the memory is cached on the host, it may lead to memory corruption issues. It should be noted that the caching of memory on the host is not solely dependent on the NO_SNOOP attribute in TLP. So to avoid the corruption, this patch overrides the NO_SNOOP attribute by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not needed for other upstream supported platforms since they do not set NO_SNOOP attribute by default. Link: https://lore.kernel.org/linux-pci/1710166298-27144-3-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09PCI: qcom: Override NO_SNOOP attribute for SA8775P RCMrinmay Sarkar
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute in its TLP for all the PCIe controllers. NO_SNOOP attribute when set, the requester is indicating that no cache coherency issue exist for the addressed memory on the endpoint i.e., memory is not cached. But in reality, requester cannot assume this unless there is a complete control/visibility over the addressed memory on the endpoint. And worst case, if the memory is cached on the endpoint, it may lead to memory corruption issues. It should be noted that the caching of memory on the endpoint is not solely dependent on the NO_SNOOP attribute in TLP. So to avoid the corruption, this patch overrides the NO_SNOOP attribute by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not needed for other upstream supported platforms since they do not set NO_SNOOP attribute by default. 8775 has IP version 1.34.0 so introduce a new cfg(cfg_1_34_0) for this platform. Assign override_no_snoop flag into struct qcom_pcie_cfg and set it true in cfg_1_34_0 and enable cache snooping if this particular flag is true. Link: https://lore.kernel.org/linux-pci/1710166298-27144-2-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: wrap comments to fit in 80 columns] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-07-09wifi: mt76: mt792x: fix scheduler interference in drv own processMichael Lo
Add some time to wait for LP engine to complete its operation before polling pmctrl register. Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Tested-by: David Ruth <druth@chromium.org> Acked-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/20240523112131.31437-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: enabling MLO when the firmware supports itSean Wang
Register MLD capability for the firmware supporting MLO. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/49c796b101e792c84bc2c0d74753022b75fd3355.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_infoSean Wang
remove the unused function mt7925_mcu_set_chan_info Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/0aa0abe7fc661380ae812c6bc879a7705de401b2.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLOSean Wang
Update band_idx in per-link BSS to be auto for the MLO-enabled firmware and the MLO-enabled firmware only supports omac index in 0. The change remains compatible with the non-MLO mode and the older firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/37fcf3ea7b4883840d61f97231277b297e1b15a3.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLOSean Wang
update mt7925_mcu_bss_basic_tlv for the MLO-enabled firmware. The change remains compatible with the non-MLO mode and the older firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/583a3ac10583cfef0028f9a0b5a4802fc4070b99.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLOSean Wang
Set the BSS index from the per-linked BSS for the firmware to identify which link the command is operating on. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/dde970c748586d03fbecbccb10cb9903284719aa.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLOSean Wang
when we serve MLO during the multiple-linked connection, the chanctx may be not available in the internal driver, we should get the proper the band information from link_conf for the MLO-enabled firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/6620e00fbeef686fb2041556deba346411eab0f1.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLOSean Wang
Get band information from the per-link BSS. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/4f6ca2d082627bb93f79d5a4df80dc08998ee5d2.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLOSean Wang
add mt7925_mcu_sta_eht_mld_tlv for the MLO-enabled firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/a1001592eeef4e4ee2c3e15dc94cca0815d64e59.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLOSean Wang
update mt7925_mcu_sta_update for the MLO-enabled firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/2e25bfc2d8aa503ecd1ba8099c6e54dce0c27b99.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLOSean Wang
Update mt7925_mcu_bss_mld_tlv for the MLO-enabled firmware The change remains compatible with the non-MLO mode and the older firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/a3d03b0a1ca916b2b8b2e7c0afcdcd7e258d97c3.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLOSean Wang
update mt7925_mcu_bss_mld_tlv for the MLO-enabled firmware, the change remains compatible with the non-MLO mode and the older firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/2d89b93bcfd92e7c6987aaa0a3c4637e605ac154.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLOSean Wang
Update mt7925_mcu_sta_mld_tlv for the MLO-enabled firmware. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/25ea3ffd3875083577ab440ec63f3dcd9dc233f4.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctxSean Wang
add mt7925_[assign,unassign]_vif_chanctx to assign and unassign chanctx to the specific link configuration. If the chctx is not pass in the parameter, we will look up the channel information from link_conf->chanreq.oper. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/15261879a16cb12674d6dea7703410baa6883799.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: add def_wcid to struct mt76_wcidSean Wang
add def_wcid to struct mt76_wcid to allow per-link wcid to retrieve the struct ieee80211_sta structure. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/d5188ca633666eaad7e90a8061d1a0585487e128.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: report link information in rx statusSean Wang
report link information in rx status Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/c7cdc17d94375a76802a5c4a825ea3e51cdb53af.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: update rate index according to link idSean Wang
Update rate index according to link id. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/e0bbc0932edbd9225fe7b7736693c137cf433a52.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_changeSean Wang
add link handling in the mt7925_ipv6_addr_change Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/ed429b1896cc10c8db25dc2ade3e59bec78d7131.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: add link handling in the BSS_CHANGED_ARP_FILTER handlerSean Wang
add link handling in the BSS_CHANGED_ARP_FILTER handler. Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/6e26e2ce253630ab29702693a7822f9961de6a18.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-07-09wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iterSean Wang
add link handling in mt7925_vif_connect_iter Co-developed-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Link: https://patch.msgid.link/c8d66043a4d31801249d53dd23f695c28a97a933.1720248331.git.sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-15 13:37:25 +0000