| Age | Commit message (Collapse) | Author |
|---|
|
|
|
The code got copied from get_workaround_page, but here p->page is the
correct way to reference the page.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Fixes: adc902ceada2 ("wifi: iwlwifi: keep the TSO and workaround pages mapped")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202407062135.NNjnmMdR-lkp@intel.com/
Link: https://patch.msgid.link/20240709123149.1848315-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clean up some redundant code in the KASLR placement handling logic. No
functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull #2 for v6.11:
Features and functionality:
- More eDP Panel Replay enabling (Jouni)
- Add async flip and flip done tracepoints (Ville)
Refactoring and cleanups:
- Clean up BDW+ pipe interrupt register definitions (Ville)
- Prep work for DSB based plane programming (Ville)
- Relocate encoder suspend/shutdown helpers (Imre)
- Polish plane surface alignment handling (Ville)
Fixes:
- Enable more fault interrupts on TGL+/MTL+ (Ville)
- Fix CMRR 32-bit build (Mitul)
- Fix PSR Selective Update Region Scan Line Capture Indication (Jouni)
- Fix cursor fb unpinning (Maarten, Ville)
- Fix Cx0 PHY PLL state verification in TBT mode (Imre)
- Fix unnecessary MG DP programming on MTL+ Type-C (Imre)
DRM changes:
- Rename drm_plane_check_pixel_format() to drm_plane_has_format() and export
(Ville)
- Add drm_vblank_work_flush_all() (Maarten)
Xe driver changes:
- Call encoder .suspend_complete() hook also on Xe (Imre)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875xttazx2.fsf@intel.com
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match callback for busses was changed to
take a const pointer to struct device_driver. Unfortunately I missed
fixing up the zorro code, and was only noticed after-the-fact by the
kernel test robot. Resolve this issue by properly changing the
zorro_bus_match() function.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240710073413.495541-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A newline was missing and closing braces of functions do not need a
semicolon.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The FIXME is very old and probably needed because of some driver bug
like insufficient initialization. It may well be that it was fixed
meanwhile but we never know because the spurious irq is silently
ignored. Add now a call trace when this happens so we have more
information in case the issue still exists.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The functions module_add_driver() and module_remove_driver() do not
modify the struct device_driver structure directly, so they are safe to
be marked as a constant pointer type.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070850-entering-grandson-205e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function driver_find_device() does not modify the struct
device_driver structure directly, so it is safe to be marked as a
constant pointer type. As that is fixed up, also change the function
signature on the inline functions that call this, which are:
driver_find_device_by_name()
driver_find_device_by_of_node()
driver_find_device_by_devt()
driver_find_next_device()
driver_find_device_by_acpi_dev()
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070849-broken-front-9eb5@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions driver_create_file() and driver_remove_file() do not
modify the struct device_driver structure directly, so they are safe to
be marked as a constant pointer type.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/2024070844-volley-hatchling-c812@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add qxl_bo_pin_and_vmap() that pins and vmaps a buffer object in one
step. Update callers of the regular qxl_bo_vmap(). Fixes a bug where
qxl accesses an unpinned buffer object while it is being moved; such
as with the monitor-description BO. An typical error is shown below.
[ 4.303586] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.586883] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65376256x16777216+0+0
[ 4.904036] [drm:drm_atomic_helper_commit_planes] *ERROR* head 1 wrong: 65335296x16777216+0+0
[ 5.374347] [drm:qxl_release_from_id_locked] *ERROR* failed to find id in release_idr
Commit b33651a5c98d ("drm/qxl: Do not pin buffer objects for vmap")
removed the implicit pin operation from qxl's vmap code. This is the
correct behavior for GEM and PRIME interfaces, but the pin is still
needed for qxl internal operation.
Also add a corresponding function qxl_bo_vunmap_and_unpin() and remove
the old qxl_bo_vmap() helpers.
Future directions: BOs should not be pinned or vmapped unnecessarily.
The pin-and-vmap operation should be removed from the driver and a
temporary mapping should be established with a vmap_local-like helper.
See the client helper drm_client_buffer_vmap_local() for semantics.
v2:
- unreserve BO on errors in qxl_bo_pin_and_vmap() (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b33651a5c98d ("drm/qxl: Do not pin buffer objects for vmap")
Reported-by: David Kaplan <david.kaplan@amd.com>
Closes: https://lore.kernel.org/dri-devel/ab0fb17d-0f96-4ee6-8b21-65d02bb02655@suse.de/
Tested-by: David Kaplan <david.kaplan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708142208.194361-1-tzimmermann@suse.de
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-holtek-mouse.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-ite.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-kensington.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-keytouch.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-kye.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-lcpower.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-lenovo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-winwing.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20240709-md-drivers-hid-v2-1-67faf2f2ec90@quicinc.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Setting up HostNotify can be tricky. Support debugging by stating
when a HostNotify alert was received independent of the irq being
mapped. Especially useful with the in-kernel i2c testunit. Update
documentation as well.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.11-rc1
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/floppy.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20240602-md-block-floppy-v1-1-bc628ea5eb84@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/loop.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-block-loop-v1-1-b9b7e2603e72@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/ublk_drv.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240602-md-block-ublk_drv-v1-1-995474cafff0@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/block/xen-blkback/xen-blkback.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-block-xen-blkback-v1-1-6ff5b58bdee1@quicinc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:
dma_direct_map_page:
1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce
dma_direct_unmap_page:
2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
swiotlb_bounce
4. is_swiotlb_buffer
5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
6. swiotlb_tbl_unmap_single -> swiotlb_release_slots
Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.
There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.
Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:
* swiotlb_find_pool() becomes __swiotlb_find_pool()
* is_swiotlb_buffer() becomes swiotlb_find_pool()
* is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()
With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):
dma_direct_unmap_page:
1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
2. swiotlb_tbl_unmap_single -> swiotlb_find_pool
These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.
No functional change is intended.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Smatch complains that "ret" could be uninitialized if "pcie->icc_mem" is
NULL and "pm_suspend_target_state == PM_SUSPEND_MEM".
Silence this warning by initializing ret to zero.
Fixes: 78b5f6f8855e ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240708180539.1447307-4-dan.carpenter@linaro.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Only call dev_pm_opp_put() if dev_pm_opp_find_freq_exact() succeeds;
otherwise it leads to an error pointer dereference.
Fixes: 78b5f6f8855e ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240708180539.1447307-3-dan.carpenter@linaro.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Return a negative error code if dev_pm_opp_find_freq_floor() fails;
don't return success.
Fixes: 78b5f6f8855e ("PCI: qcom: Add OPP support to scale performance")
Link: https://lore.kernel.org/linux-pci/20240708180539.1447307-2-dan.carpenter@linaro.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Managing pci_set_mwi() with devres can easily be done with its own
callback, without the necessity to store any state about it in a
device-related struct.
Remove the MWI state from struct pci_devres. Give pcim_set_mwi() a
separate devres cleanup callback.
Link: https://lore.kernel.org/r/20240613115032.29098-10-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The bit describing whether the PCI device is currently pinned is stored
in struct pci_devres. To clean up and simplify the PCI devres API, it's
better if this information is stored in struct pci_dev.
This will later permit simplifying pcim_enable_device().
Move the 'pinned' boolean bit to struct pci_dev.
Restructure bits in struct pci_dev so the pm / pme fields are next to
each other.
Link: https://lore.kernel.org/r/20240613115032.29098-9-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The struct pci_devres has a separate boolean to track whether a device is
enabled. That, however, can easily be tracked in an agnostic manner through
the function pci_is_enabled().
Using it allows for simplifying the PCI devres implementation.
Replace the separate 'enabled' status bit from struct pci_devres with
calls to pci_is_enabled() at the appropriate places.
Link: https://lore.kernel.org/r/20240613115032.29098-8-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
These functions:
pci_request_region()
pci_request_regions()
pci_request_regions_exclusive()
pci_request_selected_regions()
pci_request_selected_regions_exclusive()
pci_intx()
are "hybrid" functions that are managed if pcim_enable_device() has been
called, but unmanaged otherwise.
This is confusing and has already caused a bug (in 8558de401b5f
("drm/vboxvideo: use managed pci functions")) because users believe all PCI
functions, such as pci_iomap_range(), can become managed that way, which is
not the case.
Add comments to the relevant functions' docstrings that warn users about
this behavior.
Link: https://lore.kernel.org/r/20240613115032.29098-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
These existing functions:
pci_request_region()
pci_request_selected_regions()
pci_request_selected_regions_exclusive()
are "hybrid" functions built on __pci_request_region() and are managed if
pcim_enable_device() has been called, but unmanaged otherwise.
Add these new functions:
pcim_request_region()
pcim_request_region_exclusive()
These are *always* managed and use the new pcim_addr_devres tracking
infrastructure instead of find_pci_dr() and struct pci_devres.region_mask.
Implement the hybrid functions using the new "pure" functions and remove
struct pci_devres.region_mask, which is no longer needed.
Link: https://lore.kernel.org/r/20240613115032.29098-6-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Deprecate pcim_iomap_table(). It returns a pointer to a table of
ioremapped BARs, or NULL if it fails. This makes uses like this:
addr = pcim_iomap_table(pdev)[0];
problematic because it causes a NULL pointer dereference on failure.
Callers should use pcim_iomap() instead.
Deprecate pcim_iomap_regions_request_all() because it is built on
__pci_request_region() and is managed if pcim_enable_device() has been
called, but unmanaged otherwise, which is prone to errors.
Callers should either use pcim_iomap_regions() to request and map BARs, or
use pcim_request_region() followed by pcim_iomap().
Link: https://lore.kernel.org/r/20240613115032.29098-5-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log, sphinx markup]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The pcim_iomap_devres table tracks entire-BAR mappings, so we can't use it
to build a managed version of pci_iomap_range(), which maps partial BARs.
Add struct pcim_addr_devres, which can track request and mapping of both
entire BARs and partial BARs.
Add the following internal devres functions based on struct
pcim_addr_devres:
pcim_iomap_region() # request & map entire BAR
pcim_iounmap_region() # unmap & release entire BAR
pcim_request_region() # request entire BAR
pcim_release_region() # release entire BAR
pcim_request_all_regions() # request all entire BARs
pcim_release_all_regions() # release all entire BARs
Rework the following public interfaces using the new infrastructure
listed above:
pcim_iomap() # map partial BAR
pcim_iounmap() # unmap partial BAR
pcim_iomap_regions() # request & map specified BARs
pcim_iomap_regions_request_all() # request all BARs, map specified BARs
pcim_iounmap_regions() # unmap & release specified BARs
Link: https://lore.kernel.org/r/20240613115032.29098-4-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The pcim_iomap_devres.table administrated by pcim_iomap_table() has its
entries set and unset at several places throughout devres.c using manual
iterations which are effectively code duplications.
Add pcim_add_mapping_to_legacy_table() and
pcim_remove_mapping_from_legacy_table() helper functions and use them where
possible.
Link: https://lore.kernel.org/r/20240613115032.29098-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The current devres implementation uses manual shift operations to check
whether a bit in a mask is set. The code can be made more readable by
writing a small helper function for that.
Implement mask_contains_bar() and use it where applicable.
Link: https://lore.kernel.org/r/20240613115032.29098-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add support for a new model to the Aquantia driver. This PHY supports
2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as
Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without
in-band signalling so reuse the existing mode to avoid changing the
uAPI.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the PHY is first coming up (or resuming from suspend), it's
possible that although the FW status shows as running, we still see
zeroes in the GLOBAL_CFG set of registers and cannot determine available
modes. Since all models support 10M, add a poll and wait the config to
become available.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checking the firmware register before it complete the boot process makes
no sense, it will report 0 even if FW is available from internal memory.
Always wait for FW to boot before continuing or we'll unnecessarily try
to load it from nvmem/filesystem and fail.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function is quite generic in this driver and not limited to aqr107.
We will use it outside its current compilation unit soon so rename it
and declare it in the header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The number of the currently released descriptor is never incremented
which results in the same skb being released multiple times.
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Reported-by: Joe Perches <joe@perches.com>
Closes: https://lore.kernel.org/all/fc1bf93d92bb5b2f99c6c62745507cc22f3a7b2d.camel@perches.com/
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240708205826.5176-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the existing {low,upp}er_32_bits() helpers instead of defining
custom variants.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/319d4a5313ac75f7bbbb6b230b6802b18075c3e0.1720430602.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is theoretically possible to return bogus uninitialized values from
mlx5_tc_ct_entry_replace_rules, even though in practice this will never
be the case as the flow rule will be part of at least the regular ct
table or the ct nat table, if not both.
But to reduce noise, initialize err to 0.
Fixes: 49d37d05f216 ("net/mlx5: CT: Separate CT and CT-NAT tuple entries")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240708080025.1593555-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the rx_hds_nodata_packets/bytes counters were added, the aggregate
counters were omitted. This patch adds them.
Fixes: e95c5b9e8912 ("net/mlx5e: SHAMPO, Add header-only ethtool counters for header data split")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240708080025.1593555-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No need to expose definer get/put functions as part of
SW Steering API - they are internal functions.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240708080025.1593555-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver triggers a "Secondary Bus Reset" (SBR) by calling
__pci_reset_function_locked() which asserts the SBR bit in the "Bridge
Control Register" in the configuration space of the upstream bridge for
2ms. This is done without locking the configuration space of the
upstream bridge port, allowing user space to access it concurrently.
Linux 6.11 will start warning about such unlocked resets [1][2]:
pcieport 0000:00:01.0: unlocked secondary bus reset via: pci_reset_bus_function+0x51c/0x6a0
Avoid the warning and the concurrent access by locking the configuration
space of the upstream bridge prior to the reset and unlocking it
afterwards.
[1] https://lore.kernel.org/all/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com/
[2] https://lore.kernel.org/all/20240531213150.GA610983@bhelgaas/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/9937b0afdb50f2f2825945393c94c093c04a5897.1720447210.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
registration
Commit 31a0fa0019b0 ("thermal/debugfs: Pass cooling device state to
thermal_debug_cdev_add()") changed the thermal core to read the current
state of the cooling device as part of the cooling device's
registration. This is incompatible with the current implementation of
the cooling device operations in mlxsw, leading to initialization
failure with errors such as:
mlxsw_spectrum 0000:01:00.0: Failed to register cooling device
mlxsw_spectrum 0000:01:00.0: cannot register bus device
The reason for the failure is that when the get current state operation
is invoked the driver tries to derive the index of the cooling device by
walking a per thermal zone array and looking for the matching cooling
device pointer. However, the pointer is returned from the registration
function and therefore only set in the array after the registration.
The issue was later fixed by commit 1af89dedc8a5 ("thermal: core: Do not
fail cdev registration because of invalid initial state") by not failing
the registration of the cooling device if it cannot report a valid
current state during registration, although drivers are responsible for
ensuring that this will not happen.
Therefore, make sure the driver is able to report a valid current state
for the cooling device during registration by passing to the
registration function a per cooling device private data that already has
the cooling device index populated.
While at it, call thermal_cooling_device_unregister() unconditionally
since the function returns immediately if the cooling device pointer is
NULL.
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/c823c4678b6b7afb902c35b3551c81a053afd110.1720447210.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A forgotten or buggy variable initialization can cause out-of-bounds access
to a register or other item array field. For an overflow, such access would
mangle adjacent parts of the register payload. For an underflow, due to all
variables being unsigned, the access would likely trample unrelated memory.
Since neither is correct, replace these accesses with accesses at the index
of 0, and warn about the issue.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/b988fb265c2f6c1206fe12d5bfdcfa188b7672d1.1720447210.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A previous commit ("PCI: dwc: ep: Remove dw_pcie_ep_init_notify() wrapper")
removed the dw_pcie_ep_init_notify() wrapper and changed the DWC glue
drivers to instead use pci_epc_init_notify() directly.
The endpoint support for the dw-rockchip had not been merged at that point
in time, so the previous commit wrapper") did not update dw-rockchip.
Do the same change for dw-rockchip, so that the driver will not try
to use a function that has now been removed.
Link: https://lore.kernel.org/linux-pci/20240622132024.2927799-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The PCIe controller in rk3568 and rk3588 can operate in endpoint mode.
This endpoint mode support heavily leverages the existing code in
pcie-designware-ep.c.
Add support for endpoint mode to the existing pcie-dw-rockchip glue
driver.
[kwilczynski: squash with patch adding the PCI_ENDPOINT dependency]
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Refactor the driver to prepare for EP mode.
Add of-match data to the existing compatible, and explicitly define it as
DW_PCIE_RC_TYPE. This way, we will be able to add EP mode in a follow-up
commit in a much less intrusive way, which makes the follow-up commit much
easier to review.
No functional change intended.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-9-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add a rockchip_pcie_ltssm() helper function that reads the LTSSM status.
This helper will be used in additional places in follow-up commits.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-8-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Fix the indentation of rockchip_pcie_{readl,writel}_apb() parameters to
match the opening parenthesis.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-7-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
PERST# is active low according to the PCIe specification.
However, the existing pcie-dw-rockchip.c driver does:
gpiod_set_value(..., 0); msleep(100); gpiod_set_value(..., 1);
when asserting + deasserting PERST#.
This is of course wrong, but because all the device trees for this
compatible string have also incorrectly marked this GPIO as ACTIVE_HIGH:
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3568*
$ git grep -B 10 reset-gpios arch/arm64/boot/dts/rockchip/rk3588*
The actual toggling of PERST# is correct, and we cannot change it anyway,
since that would break device tree compatibility.
However, this driver does request the GPIO to be initialized as
GPIOD_OUT_HIGH, which does cause a silly sequence where PERST# gets
toggled back and forth for no good reason.
Fix this by requesting the GPIO to be initialized as GPIOD_OUT_LOW (which
for this driver means PERST# asserted).
This will avoid an unnecessary signal change where PERST# gets deasserted
(by devm_gpiod_get_optional()) and then gets asserted (by
rockchip_pcie_start_link()) just a few instructions later.
Before patch, debug prints on EP side, when booting RC:
[ 845.606810] pci: PERST# asserted by host!
[ 852.483985] pci: PERST# de-asserted by host!
[ 852.503041] pci: PERST# asserted by host!
[ 852.610318] pci: PERST# de-asserted by host!
After patch, debug prints on EP side, when booting RC:
[ 125.107921] pci: PERST# asserted by host!
[ 132.111429] pci: PERST# de-asserted by host!
This extra, very short, PERST# assertion + deassertion has been reported to
cause issues with certain WLAN controllers, e.g. RTL8822CE.
Fixes: 0e898eb8df4e ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Link: https://lore.kernel.org/linux-pci/20240417164227.398901-1-cassel@kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org # v5.15+
|
