Age | Commit message (Collapse) | Author |
|
Pull block fixes from Jens Axboe:
- Fixups for the pf/pcd queue handling (YueHaibing)
- Revert of the three direct issue changes as they have been proven to
cause an issue with dm-mpath (Bart)
- Plug rq_count reset fix (Dongli)
- io_uring double free in fileset registration error handling (me)
- Make null_blk handle bad numa node passed in (John)
- BFQ ifdef fix (Konstantin)
- Flush queue leak fix (Shenghui)
- Plug trace fix (Yufen)
* tag 'for-linus-20190407' of git://git.kernel.dk/linux-block:
xsysace: Fix error handling in ace_setup
null_blk: prevent crash from bad home_node value
block: Revert v5.0 blk_mq_request_issue_directly() changes
paride/pcd: Fix potential NULL pointer dereference and mem leak
blk-mq: do not reset plug->rq_count before the list is sorted
paride/pf: Fix potential NULL pointer dereference
io_uring: fix double free in case of fileset regitration failure
blk-mq: add trace block plug and unplug for multiple queues
block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
|
|
arm/fixes
Reset controller fixes for v5.1
This tag adds missing USB PHY reset lines to the Meson G12A reset
controller header and fixes the Meson Audio ARB driver to prevent
module unloading while it is in use.
* tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux:
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
If offset is not zero and length is bigger than PAGE_SIZE,
this will cause to out of boundary access to a page memory
Fixes: 98cc093cba1e ("block, THP: make block_device_operations.rw_page support THP")
Co-developed-by: Liang ZhiCheng <liangzhicheng@baidu.com>
Signed-off-by: Liang ZhiCheng <liangzhicheng@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One minor fix and a small cleanup for the xen privcmd driver"
* tag 'for-linus-5.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Prevent buffer overflow in privcmd ioctl
xen: use struct_size() helper in kzalloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Richard Weinberger:
"A single fix for a possible infinite loop in the cfi_cmdset_0002
driver"
* tag 'mtd/fixes-for-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes. Four in three drivers: qedi, lpfc and storvsc. The
final one is labelled core, but merely adds a dh rdac entry for Lenovo
systems"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Fix missing wakeups on abort threads
scsi: storvsc: Reduce default ring buffer size to 128 Kbytes
scsi: storvsc: Fix calculation of sub-channel count
scsi: core: add new RDAC LENOVO/DE_Series device
scsi: qedi: remove declaration of nvm_image from stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A simple but wanted driver bugfix"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: don't leak the i2c adapter on error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"A 32-bit boot regression fix introduced in the merge window, a QEMU
detection fix and two fixes by Sven regarding ptrace & kprobes"
* 'parisc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Detect QEMU earlier in boot process
parisc: also set iaoq_b in instruction_pointer_set()
parisc: regs_return_value() should return gpr28
Revert: parisc: Use F_EXTEND() macro in iosapic code
|
|
Revert parts of commit 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in
iosapic code"). It breaks booting the 32-bit kernel on some machines.
Reported-by: Sven Schnelle <svens@stackframe.org>
Tested-by: Sven Schnelle <svens@stackframe.org>
Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
run simultaneously without deadlock
Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.
This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.
The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.
However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.
See
https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
https://lwn.net/Articles/180387
https://lwn.net/Articles/180396
for historic context.
The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:
kernel/power/user.c snapshot_read
fs/debugfs/file.c u32_array_read
fs/fuse/control.c fuse_conn_waiting_read + ...
drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read
arch/s390/hypfs/inode.c hypfs_read_iter
...
Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.
Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.
FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:
See
https://github.com/libfuse/osspd
https://lwn.net/Articles/308445
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510
Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216
I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:
https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169
Let's fix this regression. The plan is:
1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
doing so would break many in-kernel nonseekable_open users which
actually use ppos in read/write handlers.
2. Add stream_open() to kernel to open stream-like non-seekable file
descriptors. Read and write on such file descriptors would never use
nor change ppos. And with that property on stream-like files read and
write will be running without taking f_pos lock - i.e. read and write
could be running simultaneously.
3. With semantic patch search and convert to stream_open all in-kernel
nonseekable_open users for which read and write actually do not
depend on ppos and where there is no other methods in file_operations
which assume @offset access.
4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
steam_open if that bit is present in filesystem open reply.
It was tempting to change fs/fuse/ open handler to use stream_open
instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and
write handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
from v3.14+ (the kernel where 9c225f2655 first appeared).
This will allow to patch OSSPD and other FUSE filesystems that
provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
in their open handler and this way avoid the deadlock on all kernel
versions. This should work because fs/fuse/ ignores unknown open
flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel
that is not aware of FOPEN_STREAM will be < v3.14 where just
FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
write deadlock.
This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.
Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.
The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If xace hardware reports a bad version number, the error handling code
in ace_setup() calls put_disk(), followed by queue cleanup. However, since
the disk data structure has the queue pointer set, put_disk() also
cleans and releases the queue. This results in blk_cleanup_queue()
accessing an already released data structure, which in turn may result
in a crash such as the following.
[ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040
[ 10.681826] Faulting instruction address: 0xc0431480
[ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1]
[ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440
[ 10.682387] Modules linked in:
[ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2
[ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8
[ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+)
[ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000
[ 10.683236] DEAR: 00000040 ESR: 00000000
[ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000
[ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000
[ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000
[ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800
[ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114
[ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114
[ 10.684602] Call Trace:
[ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable)
[ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c
[ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68
[ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c
[ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508
[ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8
[ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c
[ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464
[ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4
[ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc
[ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0
[ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234
[ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c
[ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac
[ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330
[ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478
[ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114
[ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c
[ 10.687349] Instruction dump:
[ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008
[ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008
[ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]---
Fix the problem by setting the disk queue pointer to NULL before calling
put_disk(). A more comprehensive fix might be to rearrange the code
to check the hardware version before initializing data structures,
but I don't know if this would have undesirable side effects, and
it would increase the complexity of backporting the fix to older kernels.
Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface")
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
At module load, if the selected home_node value is greater than
the available numa nodes, the system will crash in
__alloc_pages_nodemask() due to a bad paging request. Prevent this
user error crash by detecting the bad value, logging an error, and
setting g_home_node back to the default of NUMA_NO_NODE.
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit
architectures. These types are required to support block device and/or
file sizes larger than 2 TiB, and have generally defaulted to on for
a long time. Enabling the option only increases the i386 tinyconfig
size by 145 bytes, and many data structures already always use
64-bit values for their in-core and on-disk data structures anyway,
so there should not be a large change in dynamic memory usage either.
Dropping this option removes a somewhat weird non-default config that
has cause various bugs or compiler warnings when actually used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
- Various alarm fixes for da9063, cros-ec and sh
- sd3078 manufacturer name fix as this was introduced this cycle
* tag 'rtc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: set uie_unsupported when relevant
rtc: sd3078: fix manufacturer name
rtc: sh: Fix invalid alarm warning for non-enabled alarm
rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
|
|
Make sure to free the i2c adapter on the error exit path.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Two queue_limits stacking fixes: disable discards if underlying
driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic
checksum errors.
- Fix that reverts a DM core limit that wasn't needed given that
dm-crypt was already updated to impose an equivalent limit.
- Fix dm-init to properly establish 'const' for __initconst array.
- Fix deadlock in DM integrity target that occurs when overlapping IO
is being issued to it. And two smaller fixes to the DM integrity
target.
* tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix deadlock with overlapping I/O
dm: disable DISCARD if the underlying storage no longer supports it
dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors
dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE")
dm init: fix const confusion for dm_allowed_targets array
dm integrity: make dm_integrity_init and dm_integrity_exit static
dm integrity: change memcmp to strncmp in dm_integrity_ctr
|
|
Pull VFIO fixes from Alex Williamson:
- Fix clang printk format errors (Louis Taylor)
- Declare structure static to fix sparse warning (Wang Hai)
- Limit user DMA mappings per container (CVE-2019-3882) (Alex
Williamson)
* tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Limit DMA mappings per container
vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static
vfio/pci: use correct format characters
|
|
dm-integrity will deadlock if overlapping I/O is issued to it, the bug
was introduced by commit 724376a04d1a ("dm integrity: implement fair
range locks"). Users rarely use overlapping I/O so this bug went
undetected until now.
Fix this bug by correcting, likely cut-n-paste, typos in
ranges_overlap() and also remove a flawed ranges_overlap() check in
remove_range_unlocked(). This condition could leave unprocessed bios
hanging on wait_list forever.
Cc: stable@vger.kernel.org # v4.19+
Fixes: 724376a04d1a ("dm integrity: implement fair range locks")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There is a Marvell 88SE9170 PCIe SATA controller I found on a board here.
Some quick testing with the ARM SMMU enabled reveals that it suffers from
the same requester ID mixup problems as the other Marvell chips listed
already.
Add the PCI vendor/device ID to the list of chips which need the
workaround.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org
|
|
The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.
After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.
Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Syzkaller report this:
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 4525 Comm: syz-executor.0 Not tainted 5.1.0-rc3+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:pcd_init+0x95c/0x1000 [pcd]
Code: c4 ab f7 48 89 d8 48 c1 e8 03 80 3c 28 00 74 08 48 89 df e8 56 a3 da f7 4c 8b 23 49 8d bc 24 80 05 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 74 05 e8 39 a3 da f7 49 8b bc 24 80 05 00 00 e8 cc b2
RSP: 0018:ffff8881e84df880 EFLAGS: 00010202
RAX: 00000000000000b0 RBX: ffffffffc155a088 RCX: ffffffffc1508935
RDX: 0000000000040000 RSI: ffffc900014f0000 RDI: 0000000000000580
RBP: dffffc0000000000 R08: ffffed103ee658b8 R09: ffffed103ee658b8
R10: 0000000000000001 R11: ffffed103ee658b7 R12: 0000000000000000
R13: ffffffffc155a778 R14: ffffffffc155a4a8 R15: 0000000000000003
FS: 00007fe71bee3700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a7334441a8 CR3: 00000001e9674003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? 0xffffffffc1508000
? 0xffffffffc1508000
do_one_initcall+0xbc/0x47d init/main.c:901
do_init_module+0x1b5/0x547 kernel/module.c:3456
load_module+0x6405/0x8c10 kernel/module.c:3804
__do_sys_finit_module+0x162/0x190 kernel/module.c:3898
do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe71bee2c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007fe71bee2c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe71bee36bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: pcd(+) paride solos_pci atm ts_fsm rtc_mt6397 mac80211 nhc_mobility nhc_udp nhc_ipv6 nhc_hop nhc_dest nhc_fragment nhc_routing 6lowpan rtc_cros_ec memconsole intel_xhci_usb_role_switch roles rtc_wm8350 usbcore industrialio_triggered_buffer kfifo_buf industrialio asc7621 dm_era dm_persistent_data dm_bufio dm_mod tpm gnss_ubx gnss_serial serdev gnss max2165 cpufreq_dt hid_penmount hid menf21bmc_wdt rc_core n_tracesink ide_gd_mod cdns_csi2tx v4l2_fwnode videodev media pinctrl_lewisburg pinctrl_intel iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 crypto_simd
ide_pci_generic piix input_leds cryptd glue_helper psmouse ide_core intel_agp serio_raw intel_gtt ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: bmc150_magn]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace d873691c3cd69f56 ]---
If alloc_disk fails in pcd_init_units, cd->disk will be
NULL, however in pcd_detect and pcd_exit, it's not check
this before free.It may result a NULL pointer dereference.
Also when register_blkdev failed, blk_cleanup_queue() and
blk_mq_free_tag_set() should be called to free resources.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 81b74ac68c28 ("paride/pcd: cleanup queues when detection fails")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, when irq_domain_add_linear() fails, the error code does not get
set so it returns zero which is wrong. Fix it by setting the appropriate
error code.
Fixes: 9e543e22e204 ("irqchip: Add driver for Loongson-1 interrupt controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190329062136.GQ32613@kadam
|
|
Currently resolutions with pixel clock higher than 340 MHz don't work
with H6 HDMI controller. They just produce a blank screen.
Limit maximum pixel clock rate to 340 MHz until scrambling is supported.
Cc: stable@vger.kernel.org # 5.0
Fixes: 40bb9d3147b2 ("drm/sun4i: Add support for H6 DW HDMI controller")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190324190609.32721-1-jernej.skrabec@siol.net
|
|
struct privcmd_buf_vma_private has a zero-sized array at the end
(pages), use the new struct_size() helper to determine the proper
allocation size and avoid potential type mistakes.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Identify Namespace failures are logged as a warning but there is not
an indication of the cause for the failure. Update the log message to
include the error status.
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
we need to make sure that subsystem lock is taken during ctrl's list
traversing. nvmet_ns_changed function is not static and can be used from
various callers simultaneously.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In case we create N namespaces while N < NVMET_MAX_NAMESPACES, we can
perform "echo 1 > <nsid>/enable" as much as we want. In case N ==
NVMET_MAX_NAMESPACES we fail. Make sure we have the same flow for any N.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Remove two pointless local variables, remove ret assignment that is
never used, move the use_sgl initialization closer to where it is used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
If the controller supports SGLs we can take another short cut for single
segment request, given that we can always map those without another
indirection structure, and thus don't need to create a scatterlist
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
If a request is single segment and fits into one or two PRP entries we
do not have to create a scatterlist for it, but can just map the bio_vec
directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
We'll have a better way to optimize for small I/O that doesn't
require it soon, so remove the existing inline_sg case to make that
optimization easier to implement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
This prepares for some bigger changes to the data mapping helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
We always have exactly one segment, so we can simply call dma_map_bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
This mirrors how nvme_map_pci is called and will allow simplifying some
checks in nvme_unmap_pci later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
This means we now have a function that undoes everything nvme_map_data
does and we can simplify the error handling a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
Cleaning up the command setup isn't related to unmapping data, and
disentangling them will simplify error handling a bit down the road.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
nvme_init_iod should really be split into two parts: initialize a few
general iod fields, which can easily be done at the beginning of
nvme_queue_rq, and allocating the scatterlist if needed, which logically
belongs into nvme_map_data with the code making use of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We don't need to save the dma device as it's not used in the hot path
and hasn't in a long time. Shrink the struct nvme_queue removing this
unnecessary member.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A negative value for the cq_vector used to mean the queue is either
disabled or a polled queue. However, we have a queue enabled flag,
so the cq_vector had been serving double duty.
Don't overload the meaning of cq_vector. Use a flag specific to the
polled queues instead.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
TP 8000 says that the use of the SUCCESS flag depends on weather the
controller support disabling sq_head pointer updates. Given that we
support it by default, makes sense that we go the extra mile to actually
use the SUCCESS flag.
When we create the C2HData PDU header, we check if sqhd_disabled is set
on our queue, if so, we set the SUCCESS flag in the PDU header and
skip sending a completion response capsule.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Oliver Smith-Denny <osmithde@cisco.com>
Tested-by: Oliver Smith-Denny <osmithde@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Update the code to use a zero-sized array instead of a pointer in
structure nvmet_fc_tgt_queue and use struct_size() in kzalloc().
Notice that one of the more common cases of allocation size calculations
is finding the size of a structure that has a zero-sized array at the end,
along with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(struct boo) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use errno_to_nvme_status to convert from a negative errno to a
nvme status field instead of going through a blk_status_t.
Also remove the pointless status variable in
nvmet_bdev_execute_write_zeroes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
|
|
Use le16_to_cpu instead of le16_to_cpup and le64_to_cpu instead of
le64_to_cpup. This will also align the code to nvme-core driver
convention.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week, just some amdgpu and i915 fixes.
i915:
- deadlock fix
- gvt fixes
amdgpu:
- PCIE dpm feature fix
- Powerplay fixes"
* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drm/i915/gvt: Correct the calculation of plane size
drm/amdgpu: remove unnecessary rlc reset function on gfx9
drm/i915: Always backoff after a drm_modeset_lock() deadlock
drm/i915/gvt: do not let pin count of shadow mm go negative
drm/i915/gvt: do not deliver a workload if its creation fails
drm/amd/display: VBIOS can't be light up HDMI when restart system
drm/amd/powerplay: fix possible hang with 3+ 4K monitors
drm/amd/powerplay: correct data type to avoid overflow
drm/amd/powerplay: add ECC feature bit
drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
|
|
Pull networking fixes from David Miller:
1) Several hash table refcount fixes in batman-adv, from Sven
Eckelmann.
2) Use after free in bpf_evict_inode(), from Daniel Borkmann.
3) Fix mdio bus registration in ixgbe, from Ivan Vecera.
4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.
5) ila rhashtable corruption fix from Herbert Xu.
6) Don't allow upper-devices to be added to vrf devices, from Sabrina
Dubroca.
7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.
8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
from Alexander Lobakin.
9) Missing IDR checks in mlx5 driver, from Aditya Pakki.
10) Fix false connection termination in ktls, from Jakub Kicinski.
11) Work around some ASPM issues with r8169 by disabling rx interrupt
coalescing on certain chips. From Heiner Kallweit.
12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
Abeni.
13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.
14) Various BPF flow dissector fixes from Stanislav Fomichev.
15) Divide by zero in act_sample, from Davide Caratti.
16) Fix bridging multicast regression introduced by rhashtable
conversion, from Nikolay Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
ibmvnic: Fix completion structure initialization
ipv6: sit: reset ip header pointer in ipip6_rcv
net: bridge: always clear mcast matching struct on reports and leaves
libcxgb: fix incorrect ppmax calculation
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
sch_cake: Make sure we can write the IP header before changing DSCP bits
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
tcp: Ensure DCTCP reacts to losses
net/sched: act_sample: fix divide by zero in the traffic path
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
net: hns: Fix sparse: some warnings in HNS drivers
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
net: hns: fix ICMP6 neighbor solicitation messages discard problem
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
net: hns: Use NAPI_POLL_WEIGHT for hns driver
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
flow_dissector: rst'ify documentation
ipv6: Fix dangling pointer when ipv6 fragment
net-gro: Fix GRO flush when receiving a GSO packet.
flow_dissector: document BPF flow dissector environment
...
|
|
Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000081acbe0
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop
CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1
NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900
REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le)
MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006
CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58
GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4
GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28
GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100
GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006
GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000
GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003
GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58
NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100
LR [c0000000081ad964] complete+0x64/0xa0
Call Trace:
[c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable)
[c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0
[c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic]
[c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic]
[c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0
[c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400
[c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0
[c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210
[c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24
[c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130
[c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PTN5150 dependencies look like they were meant to do the
right thing, but they actually should not allow building without
I2C for compile testing, as that results in a Kconfig warning
and subsequent build failure:
WARNING: unmet direct dependencies detected for REGMAP_I2C
Depends on [m]: I2C [=m]
Selected by [y]:
- EXTCON_PTN5150 [=y] && EXTCON [=y] && (I2C [=m] && GPIOLIB [=y] || COMPILE_TEST [=y])
Selected by [m]:
- EEPROM_AT24 [=m] && I2C [=m] && SYSFS [=y]
- KEYBOARD_CAP11XX [=m] && !UML && INPUT [=y] && INPUT_KEYBOARD [=y] && OF [=y] && I2C [=m]
- INPUT_DRV260X_HAPTICS [=m] && !UML && INPUT_MISC [=y] && INPUT [=y] && I2C [=m] && (GPIOLIB [=y] || COMPILE_TEST [=y])
- ... [many others]
Add parentheses around the expression so we can compile-test
without GPIOLIB but not without I2C.
Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up the intel_pstate driver after recent changes to prevent
it from printing pointless messages and update the turbostat utility
(mostly fixes and new hardware support).
Specifics:
- Make intel_pstate only load on Intel processors and prevent it from
printing pointless failure messages (Borislav Petkov).
- Update the turbostat utility:
* Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
* Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
Walton).
* Support for Intel Icelake and for systems with more than one die
per package (Len Brown).
* Cleanups (Len Brown)"
* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/intel_pstate: Load only on Intel hardware
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent stale GPE events from triggering spurious system wakeups from
suspend-to-idle (Furquan Shaikh)"
* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Clear status of GPEs before enabling them
|