summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-03-04ppp: Fix KMSAN uninit-value warning with bpfJiayuan Chen
Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000 Cc: Paul Mackerras <paulus@samba.org> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+853242d9c9917165d791@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/000000000000dea025060d6bc3bc@google.com/ Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228141408.393864-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Enable checksum for IPA_ENDPOINT_AP_MODEM_{RX,TX} for v4.7Luca Weiss
Enable the checksum option for these two endpoints in order to allow mobile data to actually work. Without this, no packets seem to make it through the IPA. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-3-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix QSB data for v4.7Luca Weiss
As per downstream reference, max_writes should be 12 and max_reads should be 13. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-2-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: ipa: Fix v4.7 resource group namesLuca Weiss
In the downstream IPA driver there's only one group defined for source and destination, and the destination group doesn't have a _DPL suffix. Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Alex Elder <elder@riscstar.com> Link: https://patch.msgid.link/20250227-ipa-v4-7-fixes-v1-1-a88dd8249d8a@fairphone.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04Merge tag 'wireless-2025-03-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== bugfixes for 6.14: * regressions from this cycle: - mac80211: fix sparse warning for monitor - nl80211: disable multi-link reconfiguration (needs fixing) * older issues: - cfg80211: reject badly combined cooked monitor, fix regulatory hint validity checks - mac80211: handle TXQ flush w/o driver per-sta flush, fix debugfs for monitor, fix element inheritance - iwlwifi: fix rfkill, dead firmware handling, rate API version, free A-MSDU handling, avoid large allocations, fix string format - brcmfmac: fix power handling on some boards * tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: nl80211: disable multi-link reconfiguration wifi: cfg80211: regulatory: improve invalid hints checking wifi: brcmfmac: keep power during suspend if board requires it wifi: mac80211: Fix sparse warning for monitor_sdata wifi: mac80211: fix vendor-specific inheritance wifi: mac80211: fix MLE non-inheritance parsing wifi: iwlwifi: Fix A-MSDU TSO preparation wifi: iwlwifi: Free pages allocated when failing to build A-MSDU wifi: iwlwifi: limit printed string from FW file wifi: iwlwifi: mvm: use the right version of the rate API wifi: iwlwifi: mvm: don't try to talk to a dead firmware wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend wifi: iwlwifi: mvm: clean up ROC on failure wifi: iwlwifi: fw: avoid using an uninitialized variable wifi: iwlwifi: fw: allocate chained SG tables for dump wifi: mac80211: remove debugfs dir for virtual monitor wifi: mac80211: Cleanup sta TXQs on flush wifi: nl80211: reject cooked mode if it is set along with other flags ==================== Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: hns3: make sure ptp clock is unregister and freed if ↵Peiyang Wang
hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed. Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: dsa: rtl8366rb: don't prompt users for LED controlJakub Kicinski
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol. It seems very unlikely user would want to intentionally disable it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlinkNikolay Aleksandrov
Partially revert commit b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") w.r.t mcc mutex it introduces and the use of usleep_range. The be2net be_ndo_bridge_getlink() callback is called with rcu_read_lock, so this code has been broken for a long time. Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien reported[1]. The call path is: be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait -> be_mcc_wait_compl -> usleep_range() [1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/ Tested-by: Ian Kumlien <ian.kumlien@gmail.com> Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-28caif_virtio: fix wrong pointer check in cfv_probe()Vitaliy Shevtsov
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs(). Fixes: 0d2e1a2926b1 ("caif_virtio: Introduce caif over virtio") Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250227184716.4715-1-v.shevtsov@mt-integration.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-28Merge tag 'for-net-2025-02-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - mgmt: Check return of mgmt_alloc_skb - btusb: Initialize .owner field of force_poll_sync_fops * tag 'for-net-2025-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name() bluetooth: btusb: Initialize .owner field of force_poll_sync_fops ==================== Link: https://patch.msgid.link/20250227223802.3299088-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27stmmac: loongson: Pass correct arg to PCI functionPhilipp Stanner
pcim_iomap_regions() should receive the driver's name as its third parameter, not the PCI device's name. Define the driver name with a macro and use it at the appropriate places, including pcim_iomap_regions(). Cc: stable@vger.kernel.org # v5.14+ Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Philipp Stanner <phasta@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Tested-by: Henry Chen <chenx97@aosc.io> Link: https://patch.msgid.link/20250226085208.97891-2-phasta@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27bluetooth: btusb: Initialize .owner field of force_poll_sync_fopsSalah Triki
Initialize .owner field of force_poll_sync_fops to THIS_MODULE in order to prevent btusb from being unloaded while its operations are in use. Fixes: 800fe5ec302e ("Bluetooth: btusb: Add support for queuing during polling interval") Signed-off-by: Salah Triki <salah.triki@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-27Merge tag 'net-6.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth. We didn't get netfilter or wireless PRs this week, so next week's PR is probably going to be bigger. A healthy dose of fixes for bugs introduced in the current release nonetheless. Current release - regressions: - Bluetooth: always allow SCO packets for user channel - af_unix: fix memory leak in unix_dgram_sendmsg() - rxrpc: - remove redundant peer->mtu_lock causing lockdep splats - fix spinlock flavor issues with the peer record hash - eth: iavf: fix circular lock dependency with netdev_lock - net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net() RDMA driver register notifier after the device Current release - new code bugs: - ethtool: fix ioctl confusing drivers about desired HDS user config - eth: ixgbe: fix media cage present detection for E610 device Previous releases - regressions: - loopback: avoid sending IP packets without an Ethernet header - mptcp: reset connection when MPTCP opts are dropped after join Previous releases - always broken: - net: better track kernel sockets lifetime - ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels - phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT - eth: enetc: number of error handling fixes - dsa: rtl8366rb: reshuffle the code to fix config / build issue with LED support" * tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) net: ti: icss-iep: Reject perout generation request idpf: fix checksums set in idpf_rx_rsc() selftests: drv-net: Check if combined-count exists net: ipv6: fix dst ref loop on input in rpl lwt net: ipv6: fix dst ref loop on input in seg6 lwt usbnet: gl620a: fix endpoint checking in genelink_bind() net/mlx5: IRQ, Fix null string in debug print net/mlx5: Restore missing trace event when enabling vport QoS net/mlx5: Fix vport QoS cleanup on error net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination. af_unix: Fix memory leak in unix_dgram_sendmsg() net: Handle napi_schedule() calls from non-interrupt net: Clear old fragment checksum value in napi_reuse_skb gve: unlink old napi when stopping a queue using queue API net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net(). tcp: Defer ts_recent changes until req is owned net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs() net: enetc: remove the mm_lock from the ENETC v4 driver net: enetc: add missing enetc4_link_deinit() net: enetc: update UDP checksum when updating originTimestamp field ...
2025-02-27Merge tag 'sound-6.14-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of fixes. The only slightly large change is for ASoC Cirrus codec, but that's still in a normal range. All the rest are small device-specific fixes and should be fairly safe to take" * tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Fix microphone regression on ASUS N705UD ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15 ASoC: cs35l56: Prevent races when soft-resetting using SPI control firmware: cs_dsp: Remove async regmap writes ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup ASoC: dapm-graph: set fill colour of turned on nodes ASoC: fsl: Rename stream name of SAI DAI driver ASoC: es8328: fix route from DAC to output ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2 ASoC: tas2764: Set the SDOUT polarity correctly ASoC: tas2764: Fix power control mask ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports ASoC: tas2770: Fix volume scale
2025-02-27net: ti: icss-iep: Reject perout generation requestMeghana Malladi
IEP driver supports both perout and pps signal generation but perout feature is faulty with half-cooked support due to some missing configuration. Remove perout support from the driver and reject perout requests with "not supported" error code. Fixes: c1e0230eeaab2 ("net: ti: icss-iep: Add IEP driver") Signed-off-by: Meghana Malladi <m-malladi@ti.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250227092441.1848419-1-m-malladi@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27idpf: fix checksums set in idpf_rx_rsc()Eric Dumazet
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header is not set yet. This triggers the following warning for CONFIG_DEBUG_NET=y builds. DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)) [ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth [ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697 [ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748) [ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261687] ? report_bug (lib/bug.c:?) [ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285) [ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309) [ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621) [ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf [ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf [ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf [ 69.261712] __napi_poll (net/core/dev.c:7194) [ 69.261716] net_rx_action (net/core/dev.c:7265) [ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293) [ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288) [ 69.261726] handle_softirqs (kernel/softirq.c:561) Fixes: 3a8845af66edb ("idpf: add RX splitq napi poll support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alan Brady <alan.brady@intel.com> Cc: Joshua Hay <joshua.a.hay@intel.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/20250226221253.1927782-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-27usbnet: gl620a: fix endpoint checking in genelink_bind()Nikita Zhandarovich
Syzbot reports [1] a warning in usb_submit_urb() triggered by inconsistencies between expected and actually present endpoints in gl620a driver. Since genelink_bind() does not properly verify whether specified eps are in fact provided by the device, in this case, an artificially manufactured one, one may get a mismatch. Fix the issue by resorting to a usbnet utility function usbnet_get_endpoints(), usually reserved for this very problem. Check for endpoints and return early before proceeding further if any are missing. [1] Syzbot report: usb 5-1: Manufacturer: syz usb 5-1: SerialNumber: syz usb 5-1: config 0 descriptor?? gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ... ------------[ cut here ]------------ usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 Modules linked in: CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:3827 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_resolve_output net/core/neighbour.c:1514 [inline] neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494 neigh_output include/net/neighbour.h:539 [inline] ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141 __ip6_finish_output net/ipv6/ip6_output.c:215 [inline] ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819 mld_send_cr net/ipv6/mcast.c:2120 [inline] mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651 process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: syzbot+d693c07c6f647e0388d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d693c07c6f647e0388d3 Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables") Cc: stable@vger.kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://patch.msgid.link/20250224172919.1220522-1-n.zhandarovich@fintech.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-26net/mlx5: IRQ, Fix null string in debug printShay Drory
irq_pool_alloc() debug print can print a null string. Fix it by providing a default string to print. Fixes: 71e084e26414 ("net/mlx5: Allocating a pool of MSI-X vectors for SFs") Signed-off-by: Shay Drory <shayd@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501141055.SwfIphN0-lkp@intel.com/ Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250225072608.526866-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net/mlx5: Restore missing trace event when enabling vport QoSCarolina Jubran
Restore the `trace_mlx5_esw_vport_qos_create` event when creating the vport scheduling element. This trace event was lost during refactoring. Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250225072608.526866-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net/mlx5: Fix vport QoS cleanup on errorCarolina Jubran
When enabling vport QoS fails, the scheduling node was never freed, causing a leak. Add the missing free and reset the vport scheduling node pointer to NULL. Fixes: be034baba83e ("net/mlx5: Make vport QoS enablement more flexible for future extensions") Signed-off-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20250225072608.526866-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.Harshal Chaudhari
Non IP flow, with vlan tag not working as expected while running below command for vlan-priority. fixed that. ethtool -N eth1 flow-type ether vlan 0x8000 vlan-mask 0x1fff action 0 loc 0 Fixes: 1274daede3ef ("net: mvpp2: cls: Add steering based on vlan Id and priority.") Signed-off-by: Harshal Chaudhari <hchaudhari@marvell.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250225042058.2643838-1-hchaudhari@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26gve: unlink old napi when stopping a queue using queue APIHarshitha Ramamurthy
When a queue is stopped using the ndo queue API, before destroying its page pool, the associated NAPI instance needs to be unlinked to avoid warnings. Handle this by calling page_pool_disable_direct_recycling() when stopping a queue. Cc: stable@vger.kernel.org Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode") Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250226003526.1546854-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Small ufs fixes and a core change to clear the command private area on every retry (which fixes a reported bug in virtio_scsi)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: bsg: Fix crash when arpmb command fails scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init() scsi: core: Clear driver private data when retrying request scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
2025-02-26wifi: brcmfmac: keep power during suspend if board requires itMatthias Proske
After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card unless WOWL is used"), the wifi adapter by default is turned off on suspend and then re-probed on resume. This conflicts with some embedded boards that require to remain powered. They will fail on resume with: brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout ieee80211 phy1: brcmf_bus_started: failed: -110 ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110 brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed This commit checks for the Device Tree property 'cap-power-off-cards'. If this property is not set, it means that we do not have the capability to power off and should therefore remain powered. Signed-off-by: Matthias Proske <email@matthias-proske.de> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-25net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()Wei Fang
There is an off-by-one issue for the err_chained_bd path, it will free one more tx_swbd than expected. But there is no such issue for the err_map_data path. To fix this off-by-one issue and make the two error handling consistent, the increment of 'i' and 'count' remain in sync and enetc_unwind_tx_frame() is called for error handling. Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: remove the mm_lock from the ENETC v4 driverWei Fang
Currently, the ENETC v4 driver has not added the MAC merge layer support in the upstream, so the mm_lock is not initialized and used, so remove the mm_lock from the driver. Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-8-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: add missing enetc4_link_deinit()Wei Fang
The enetc4_link_init() is called when the PF driver probes to create phylink and MDIO bus, but we forgot to call enetc4_link_deinit() to free the phylink and MDIO bus when the driver was unbound. so add missing enetc4_link_deinit() to enetc4_pf_netdev_destroy(). Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-7-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: update UDP checksum when updating originTimestamp fieldWei Fang
There is an issue with one-step timestamp based on UDP/IP. The peer will discard the sync packet because of the wrong UDP checksum. For ENETC v1, the software needs to update the UDP checksum when updating the originTimestamp field, so that the hardware can correctly update the UDP checksum when updating the correction field. Otherwise, the UDP checksum in the sync packet will be wrong. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNCWei Fang
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash if VFs are used to test one-step timestamp, the crash log as follows. [ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0 [ 129.287769] Call trace: [ 129.290219] enetc_port_mac_wr+0x30/0xec (P) [ 129.294504] enetc_start_xmit+0xda4/0xe74 [ 129.298525] enetc_xmit+0x70/0xec [ 129.301848] dev_hard_start_xmit+0x98/0x118 Fixes: 41514737ecaa ("enetc: add get_ts_info interface for ethtool") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-5-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: correct the xdp_tx statisticsWei Fang
The 'xdp_tx' is used to count the number of XDP_TX frames sent, not the number of Tx BDs. Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: keep track of correct Tx BD count in enetc_map_tx_tso_buffs()Wei Fang
When creating a TSO header, if the skb is VLAN tagged, the extended BD will be used and the 'count' should be increased by 2 instead of 1. Otherwise, when an error occurs, less tx_swbd will be freed than the actual number. Fixes: fb8629e2cbfc ("net: enetc: add support for software TSO") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: enetc: fix the off-by-one issue in enetc_map_tx_buffs()Wei Fang
When a DMA mapping error occurs while processing skb frags, it will free one more tx_swbd than expected, so fix this off-by-one issue. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Cc: stable@vger.kernel.org Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://patch.msgid.link/20250224111251.1061098-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ixgbe: fix media cage present detection for E610 devicePiotr Kwapulinski
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect checking of media cage presence for E610 device. Fix it. Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25iavf: fix circular lock dependency with netdev_lockJacob Keller
We have recently seen reports of lockdep circular lock dependency warnings when loading the iAVF driver: [ 1504.790308] ====================================================== [ 1504.790309] WARNING: possible circular locking dependency detected [ 1504.790310] 6.13.0 #net_next_rt.c2933b2befe2.el9 Not tainted [ 1504.790311] ------------------------------------------------------ [ 1504.790312] kworker/u128:0/13566 is trying to acquire lock: [ 1504.790313] ffff97d0e4738f18 (&dev->lock){+.+.}-{4:4}, at: register_netdevice+0x52c/0x710 [ 1504.790320] [ 1504.790320] but task is already holding lock: [ 1504.790321] ffff97d0e47392e8 (&adapter->crit_lock){+.+.}-{4:4}, at: iavf_finish_config+0x37/0x240 [iavf] [ 1504.790330] [ 1504.790330] which lock already depends on the new lock. [ 1504.790330] [ 1504.790330] [ 1504.790330] the existing dependency chain (in reverse order) is: [ 1504.790331] [ 1504.790331] -> #1 (&adapter->crit_lock){+.+.}-{4:4}: [ 1504.790333] __lock_acquire+0x52d/0xbb0 [ 1504.790337] lock_acquire+0xd9/0x330 [ 1504.790338] mutex_lock_nested+0x4b/0xb0 [ 1504.790341] iavf_finish_config+0x37/0x240 [iavf] [ 1504.790347] process_one_work+0x248/0x6d0 [ 1504.790350] worker_thread+0x18d/0x330 [ 1504.790352] kthread+0x10e/0x250 [ 1504.790354] ret_from_fork+0x30/0x50 [ 1504.790357] ret_from_fork_asm+0x1a/0x30 [ 1504.790361] [ 1504.790361] -> #0 (&dev->lock){+.+.}-{4:4}: [ 1504.790364] check_prev_add+0xf1/0xce0 [ 1504.790366] validate_chain+0x46a/0x570 [ 1504.790368] __lock_acquire+0x52d/0xbb0 [ 1504.790370] lock_acquire+0xd9/0x330 [ 1504.790371] mutex_lock_nested+0x4b/0xb0 [ 1504.790372] register_netdevice+0x52c/0x710 [ 1504.790374] iavf_finish_config+0xfa/0x240 [iavf] [ 1504.790379] process_one_work+0x248/0x6d0 [ 1504.790381] worker_thread+0x18d/0x330 [ 1504.790383] kthread+0x10e/0x250 [ 1504.790385] ret_from_fork+0x30/0x50 [ 1504.790387] ret_from_fork_asm+0x1a/0x30 [ 1504.790389] [ 1504.790389] other info that might help us debug this: [ 1504.790389] [ 1504.790389] Possible unsafe locking scenario: [ 1504.790389] [ 1504.790390] CPU0 CPU1 [ 1504.790391] ---- ---- [ 1504.790391] lock(&adapter->crit_lock); [ 1504.790393] lock(&dev->lock); [ 1504.790394] lock(&adapter->crit_lock); [ 1504.790395] lock(&dev->lock); [ 1504.790397] [ 1504.790397] *** DEADLOCK *** This appears to be caused by the change in commit 5fda3f35349b ("net: make netdev_lock() protect netdev->reg_state"), which added a netdev_lock() in register_netdevice. The iAVF driver calls register_netdevice() from iavf_finish_config(), as a final stage of its state machine post-probe. It currently takes the RTNL lock, then the netdev lock, and then the device critical lock. This pattern is used throughout the driver. Thus there is a strong dependency that the crit_lock should not be acquired before the net device lock. The change to register_netdevice creates an ABBA lock order violation because the iAVF driver is holding the crit_lock while calling register_netdevice, which then takes the netdev_lock. It seems likely that future refactors could result in netdev APIs which hold the netdev_lock while calling into the driver. This means that we should not re-order the locks so that netdev_lock is acquired after the device private crit_lock. Instead, notice that we already release the netdev_lock prior to calling the register_netdevice. This flow only happens during the early driver initialization as we transition through the __IAVF_STARTUP, __IAVF_INIT_VERSION_CHECK, __IAVF_INIT_GET_RESOURCES, etc. Analyzing the places where we take crit_lock in the driver there are two sources: a) several of the work queue tasks including adminq_task, watchdog_task, reset_task, and the finish_config task. b) various callbacks which ultimately stem back to .ndo operations or ethtool operations. The latter cannot be triggered until after the netdevice registration is completed successfully. The iAVF driver uses alloc_ordered_workqueue, which is an unbound workqueue that has a max limit of 1, and thus guarantees that only a single work item on the queue is executing at any given time, so none of the other work threads could be executing due to the ordered workqueue guarantees. The iavf_finish_config() function also does not do anything else after register_netdevice, unless it fails. It seems unlikely that the driver private crit_lock is protecting anything that register_netdevice() itself touches. Thus, to fix this ABBA lock violation, lets simply release the adapter->crit_lock as well as netdev_lock prior to calling register_netdevice(). We do still keep holding the RTNL lock as required by the function. If we do fail to register the netdevice, then we re-acquire the adapter critical lock to finish the transition back to __IAVF_INIT_CONFIG_ADAPTER. This ensures every call where both netdev_lock and the adapter->crit_lock are acquired under the same ordering. Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ice: Avoid setting default Rx VSI twice in switchdev setupMarcin Szycik
As part of switchdev environment setup, uplink VSI is configured as default for both Tx and Rx. Default Rx VSI is also used by promiscuous mode. If promisc mode is enabled and an attempt to enter switchdev mode is made, the setup will fail because Rx VSI is already configured as default (rule exists). Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on echo 1 > /sys/class/net/$PF1/device/sriov_numvfs In switchdev setup, use ice_set_dflt_vsi() instead of plain ice_cfg_dflt_vsi(), which avoids repeating setting default VSI for Rx if it's already configured. Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ice: Fix deinitializing VF in error pathMarcin Szycik
If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself). Fixes: 8cd8a6b17d27 ("ice: move VF overflow message count into struct ice_mbx_vf_info") Reported-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Closes: https://lore.kernel.org/intel-wired-lan/PH0PR11MB50138B635F2E5CEB7075325D961F2@PH0PR11MB5013.namprd11.prod.outlook.com Reviewed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25net: ethernet: ti: am65-cpsw: select PAGE_POOLSascha Hauer
am65-cpsw uses page_pool_dev_alloc_pages(), thus needs PAGE_POOL selected to avoid linker errors. This is missing since the driver started to use page_pool helpers in 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250224-net-am654-nuss-kconfig-v2-1-c124f4915c92@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: - Fix a mlx5 malfunction if the UMR QP gets an error - Return the correct port number to userspace for a mlx5 DCT - Don't cause a UMR QP error if DMABUF teardown races with invalidation - Fix a WARN splat when unregisering so mlx5 device memory MR types - Use the correct alignment for the mana doorbell so that two processes do not share the same physical page on non-4k page systems - MAINTAINERS updates for MANA - Retry failed HNS FW commands because some can take a long time - Cast void * handle to the correct type in bnxt to fix corruption - Avoid a NULL pointer crash in bnxt_re - Fix skipped ib_device_unregsiter() for bnxt_re due to some earlier rework - Correctly detect if the bnxt supports extended statistics - Fix refcount leak in mlx5 odp introduced by a previous fix - Map the FW result for the port rate to the userspace values properly in mlx5, returns correct values for newer 800G ports - Don't wrongly destroy counters objects that were not automatically created during mlx5 bind qp - Set page size/shift members of kernel owned SRQs to fix a crash in nvme target * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers RDMA/mlx5: Fix bind QP error cleanup flow RDMA/mlx5: Fix AH static rate parsing RDMA/mlx5: Fix implicit ODP hang on parent deregistration RDMA/bnxt_re: Fix the statistics for Gen P7 VF RDMA/bnxt_re: Fix issue in the unload path RDMA/bnxt_re: Add sanity checks on rdev validity RDMA/bnxt_re: Fix an issue in bnxt_re_async_notifier RDMA/hns: Fix mbox timing out by adding retry mechanism MAINTAINERS: update maintainer for Microsoft MANA RDMA driver RDMA/mana_ib: Allocate PAGE aligned doorbell index RDMA/mlx5: Fix a WARN during dereg_mr for DM type RDMA/mlx5: Fix a race for DMABUF MR which can lead to CQE with error IB/mlx5: Set and get correct qp_num for a DCT QP RDMA/mlx5: Fix the recovery flow of the UMR QP
2025-02-25firmware: cs_dsp: Remove async regmap writesRichard Fitzgerald
Change calls to async regmap write functions to use the normal blocking writes so that the cs35l56 driver can use spi_bus_lock() to gain exclusive access to the SPI bus. As this is part of a fix, it makes only the minimal change to swap the functions to the blocking equivalents. There's no need to risk reworking the buffer allocation logic that is now partially redundant. The async writes are a 12-year-old workaround for inefficiency of synchronous writes in the SPI subsystem. The SPI subsystem has since been changed to avoid the overheads, so this workaround should not be necessary. The cs35l56 driver needs to use spi_bus_lock() prevent bus activity while it is soft-resetting the cs35l56. But spi_bus_lock() is incompatible with spi_async() calls, which will fail with -EBUSY. Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20250225131843.113752-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-24Merge tag 'for-6.14/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mikulas Patocka: - dm-vdo: add missing spin_lock_init - dm-integrity: divide-by-zero fix - dm-integrity: do not report unused entries in the table line * tag 'for-6.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm vdo: add missing spin_lock_init dm-integrity: Do not emit journal configuration in DM table for Inline mode dm-integrity: Avoid divide by zero in table status in Inline mode
2025-02-24selftests: drv-net: test XDP, HDS auto and the ioctl pathJakub Kicinski
Test XDP and HDS interaction. While at it add a test for using the IOCTL, as that turned out to be the real culprit. Testing bnxt: # NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py KTAP version 1 1..12 ok 1 hds.get_hds ok 2 hds.get_hds_thresh ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device ok 4 hds.set_hds_enable ok 5 hds.set_hds_thresh_zero ok 6 hds.set_hds_thresh_max ok 7 hds.set_hds_thresh_gt ok 8 hds.set_xdp ok 9 hds.enabled_set_xdp ok 10 hds.ioctl ok 11 hds.ioctl_set_xdp ok 12 hds.ioctl_enabled_set_xdp # Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0 and netdevsim: # ./ksft-net-drv/drivers/net/hds.py KTAP version 1 1..12 ok 1 hds.get_hds ok 2 hds.get_hds_thresh ok 3 hds.set_hds_disable ok 4 hds.set_hds_enable ok 5 hds.set_hds_thresh_zero ok 6 hds.set_hds_thresh_max ok 7 hds.set_hds_thresh_gt ok 8 hds.set_xdp ok 9 hds.enabled_set_xdp ok 10 hds.ioctl ok 11 hds.ioctl_set_xdp ok 12 hds.ioctl_enabled_set_xdp # Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0 Netdevsim needs a sane default for tx/rx ring size. ethtool 6.11 is needed for the --disable-netlink option. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24dm vdo: add missing spin_lock_initKen Raeburn
Signed-off-by: Ken Raeburn <raeburn@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org
2025-02-24net: dsa: rtl8366rb: Fix compilation problemLinus Walleij
When the kernel is compiled without LED framework support the rtl8366rb fails to build like this: rtl8366rb.o: in function `rtl8366rb_setup_led': rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8): undefined reference to `led_init_default_state_get' rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240): undefined reference to `devm_led_classdev_register_ext' As this is constantly coming up in different randconfig builds, bite the bullet and create a separate file for the offending code, split out a header with all stuff needed both in the core driver and the leds code. Add a new bool Kconfig option for the LED compile target, such that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB which make LED support always available when LEDS_CLASS is compiled into the kernel and enforce that if the LEDS_CLASS is a module, then the RTL8366RB driver needs to be a module as well so that modprobe can resolve the dependencies. Fixes: 32d617005475 ("net: dsa: realtek: add LED drivers for rtl8366rb") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-23Merge tag 'i2c-for-6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Revert one cleanup which turned out to eat too much stack space" * tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Allocate temporary client dynamically
2025-02-23Merge tag 'edac_urgent_for_v6.14_rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Have qcom_edac use the correct interrupt enable register to configure the RAS interrupt lines * tag 'edac_urgent_for_v6.14_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/qcom: Correct interrupt enable register configuration
2025-02-23RDMA/bnxt_re: Fix the page details for the srq created by kernel consumersKashyap Desai
While using nvme target with use_srq on, below kernel panic is noticed. [ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514) [ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI .. [ 566.393799] <TASK> [ 566.393807] ? __die_body+0x1a/0x60 [ 566.393823] ? die+0x38/0x60 [ 566.393835] ? do_trap+0xe4/0x110 [ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393881] ? do_error_trap+0x7c/0x120 [ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393911] ? exc_divide_error+0x34/0x50 [ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393939] ? asm_exc_divide_error+0x16/0x20 [ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re] [ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re] [ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re] [ 566.394057] ? srso_return_thunk+0x5/0x5f [ 566.394068] ? __init_swait_queue_head+0x4a/0x60 [ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core] [ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma] [ 566.394174] ? lock_release+0x22c/0x3f0 [ 566.394187] ? srso_return_thunk+0x5/0x5f Page size and shift info is set only for the user space SRQs. Set page size and page shift for kernel space SRQs also. Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation") Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://patch.msgid.link/1740237621-29291-1-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-02-23RDMA/mlx5: Fix bind QP error cleanup flowPatrisious Haddad
When there is a failure during bind QP, the cleanup flow destroys the counter regardless if it is the one that created it or not, which is problematic since if it isn't the one that created it, that counter could still be in use. Fix that by destroying the counter only if it was created during this call. Fixes: 45842fc627c7 ("IB/mlx5: Support statistic q counter configuration") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Link: https://patch.msgid.link/25dfefddb0ebefa668c32e06a94d84e3216257cf.1740033937.git.leon@kernel.org Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2025-02-22Merge tag 'irq-urgent-2025-02-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Fix miscellaneous irqchip bugs" * tag 'irq-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom-pdc: Workaround hardware register bug on X1E80100 irqchip/jcore-aic, clocksource/drivers/jcore: Fix jcore-pit interrupt request irqchip/gic-v3: Fix rk3399 workaround when secure interrupts are enabled
2025-02-22i2c: core: Allocate temporary client dynamicallyGeert Uytterhoeven
drivers/i2c/i2c-core-base.c: In function ‘i2c_detect.isra’: drivers/i2c/i2c-core-base.c:2544:1: warning: the frame size of 1312 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2544 | } | ^ Fix this by allocating the temporary client structure dynamically, as it is a rather large structure (1216 bytes, depending on kernel config). This is basically a revert of the to-be-fixed commit with some checkpatch improvements. Fixes: 735668f8e5c9 ("i2c: core: Allocate temp client on the stack in i2c_detect") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Su Hui <suhui@nfschina.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [wsa: updated commit message, merged tags from similar patch] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-02-21net: cadence: macb: Synchronize stats calculationsSean Anderson
Stats calculations involve a RMW to add the stat update to the existing value. This is currently not protected by any synchronization mechanism, so data races are possible. Add a spinlock to protect the update. The reader side could be protected using u64_stats, but we would still need a spinlock for the update side anyway. And we always do an update immediately before reading the stats anyway. Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 03:58:56 +0000